Platinum Nanoflowers on Scratched Silicon by Galvanic Displacement for an Effective SALDI Substrate

We report a new and facile method for synthesizing 3D platinum nanoflowers (Pt Nfs) on a scratched silicon substrate by electroless galvanic displacement and discuss the applications of the Pt Nfs in surface‐assisted laser desorption/ionization‐mass spectrometry (SALDI‐MS). Surface scratching of n‐type silicon is essential to induce Pt Nf growth on a silicon substrate (to obtain a Pt Nf silicon hybrid plate) by the galvanic displacement reaction. The Pt Nf silicon hybrid plate showed excellent SALDI activity in terms of the efficient generation of protonated molecular ions in the absence of a citrate buffer. We propose that the acidity of the Si? OH moieties on silicon increases because of the electron‐withdrawing nature of the Pt Nfs; hence, proton transfer from the Si? OH groups to the analyte molecules is enhanced, and finally, thermal desorption of the analyte ions from the surface occurs. Signal enhancement was observed for protonated molecular ions produced from a titania nanotube array (TNA) substrate on which Pt nanoparticles had been photochemically deposited. Moreover, surface modification of the Pt Nf silicon hybrid plate by perfluorodecyltrichlorosilane (FDTS) (to obtain an FDTS‐Pt Nf silicon hybrid plate) was found to facilitate soft SALDI of labile compounds. More interestingly, the FDTS‐Pt Nf silicon hybrid plate acts 1) as a high‐affinity substrate for phosphopeptides and 2) as a SALDI substrate. The feasibility of using the FDTS‐Pt Nf silicon hybrid plate for SALDI‐MS has been demonstrated by using a β‐casein digest and various analytes, including small molecules, peptides, phosphopeptides, phospholipids, carbohydrates, and synthetic polymers. The hybridization of Pt Nfs with a scratched silicon substrate has been found to be important for achieving excellent SALDI activity.     

Influence of surface melting effects and availability of reagent ions on LDI‐MS efficiency after UV laser irradiation of Pd nanostructures

In this study, the influence of surface morphology, reagent ions and surface restructuring effects on atmospheric pressure laser desorption/ionization (LDI) for small molecules after laser irradiation of palladium self‐assembled nanoparticular (Pd‐NP) structures has been systematically studied. The dominant role of surface morphology during the LDI process, which was previously shown for silicon‐based substrates, has not been investigated for metal‐based substrates before. In our experiments, we demonstrated that both the presence of reagent ions and surface reorganization effects – in particular, melting – during laser irradiation was required for LDI activity of the substrate. The synthesized Pd nanostructures with diameters ranging from 60 to 180 nm started to melt at similar temperatures, viz. 890–898 K. These materials exhibited different LDI efficiencies, however, with Pd‐NP materials being the most effective surface in our experiments. Pd nanostructures of diameters >400–800 nm started to melt at higher temperatures, >1000 K, making such targets more resistant to laser irradiation, with subsequent loss of LDI activity. Our data demonstrated that both melting of the surface structures and the presence of reagent ions were essential for efficient LDI of the investigated low molecular weight compounds. This dependence of LDI on melting points was exploited further to improve the performance of Pd‐NP‐based sampling targets. For example, adding sodium hypophosphite as reducing agent to Pd electrolyte solutions during synthesis lowered the melting points of the Pd‐NP materials and subsequently gave reduced laser fluence requirements for LDI. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel Galvanic Nanostructures of Ag and Pd for Efficient Laser Desorption/Ionization of Low Molecular Weight Compounds

A simple approach for synthesis of palladium and silver nanostructures with readily adjustable morphologies was developed using galvanic electrochemical deposition, for application to surface-assisted laser desorption/ionization (SALDI) of small biological molecules. A range of fatty acids, triglycerides, carbohydrates, and antibiotics were investigated to assess the performance of the new materials. Intense analyte cations were generated from the galvanic surfaces upon UV laser irradiation such as potassium adducts for a film thickness <100 nm (originating from impurities of the electrolyte solution) and Pd and Ag cluster ions for films with a thickness >120 nm. Possible laser desorption/ionization mechanisms of these galvanic structures are discussed. The films exhibited self-organizing abilities and adjustable morphologies by changing electrochemical parameters. They did not require any stabilizing agents and were inexpensive and very easy to produce. SALDI analysis showed that the materials were stable under ambient conditions and analytical results with excellent measurement reproducibility and detection sensitivity similar to MALDI were obtained. Finally, we applied the galvanic surfaces to fast screening of natural oils with minimum sample preparation.

On the role of defects and surface chemistry for surface-assisted laser desorption ionization from silicon

The generation of ions from silicon substrates in surface-assisted laser desorption ionization (SALDI) has been studied using silicon substrates prepared and etched by a variety of different methods. The different substrates were compared with respect to their ability to generate peptide mass spectra using standard liquid sample deposition. The desorption/ionization processes were studied using gas-phase analyte deposition. Mass spectra were obtained from compounds with gas-phase basicities above 850 kJmol and with molecular weights up to 370 Da. UV, VIS, and IR lasers were used for desorption. Ionization efficiencies were measured as a function of laser fluence and accumulated laser irradiance dose. Solvent vapors were added to the ion source and shown to result in fundamental laser-induced chemical and physical changes to the substrate surfaces. It is demonstrated that both the chemical properties of the substrate surface and the presence of a highly disordered structure with a high concentration of "dangling bonds" or deep gap states are required for efficient ion generation. In particular, amorphous silicon is shown to be an excellent SALDI substrate with ionization efficiencies as high as 1%, while hydrogen-passivated amorphous silicon is SALDI inactive. Based on the results, a novel model for SALDI ion generation is proposed with the following reaction steps: (1) the adsorption of neutral analyte molecules on the SALDI surface with formation of a hydrogen bond to surface Si-OH groups, (2) the electronic excitation of the substrate to form free electron/hole pairs (their relaxation results in trapped positive charges in near-surface deep gap states, causing an increase in the acidity of the Si-OH groups and proton transfer to the analyte molecules), and (3) the thermally activated dissociation of the analyte ions from the surface via a "loose" transition state.     

硅纳米结构对表面辅助激光解吸/电离质谱检测性能的提高

本文总结了多种构筑硅纳米结构的方法, 综述了近年来利用硅纳米结构提高表面辅助激光解吸/电离质谱(SALDI-MS)性能的研究工作, 展望了利用功能化的硅纳米结构表面进一步提高激光解吸/电离(LDI)效率的前景.     

An activated carbon substrate surface for laser desorption mass spectrometry

A method to obtain laser desorption/ionization mass spectra of organic compounds by depositing sample solutions onto a carbon substrate surface is demonstrated. The substrate consists of a thin layer of activated carbon particles immobilized on an aluminum support. In common with the porous carbon suspension samples used in previous “surface-assisted laser desorption/ionization” (SALDI) work, the mass spectra contain only a few “matrix” background ion peaks, minimizing interference with analyte ion peaks. The presence of glycerol ensured that the ion signals were stable over hundreds of laser shots. In addition, the carbon substrate surface has several advantages over the suspension samples. The use of a very thin layer of carbon significantly improves the sensitivity. Detection limits range from attomoles for crystal violet to femtomoles for bradykinin. Very little sample preparation is required as the analyte solution is simply pipetted onto the substrate surface and glycerol added. When using an alternate sample deposition method, a mass resolution for bradykinin of 1800 is achieved in linear time-of-flight mode. This is close to the resolution limit set by the detector system and above instrument specification for matrix-assisted laser desorption/ionization mass spectra.     

Polyelectrolyte-templated synthesis of bimetallic nanoparticles

Bimetallic nanoparticles (NPs) are known to exhibit enhanced optical and catalytic properties that can be optimized by tailoring NP composition, size, and morphology. Galvanic deposition of a second metal onto a primary metal NP template is a versatile method for fabricating bimetallic NPs using a scalable, solution-based synthesis. We demonstrate that the galvanic displacement reaction pathway can be controlled through appropriate surface modification of the NP template. To synthesize bimetallic Au-Ag NPs, we used colloidal Ag NPs modified by layer-by-layer (LBL) assembled polyelectrolyte layers to template the reduction of HAuCl(4). NPs terminated with positively and negatively charged polyelectrolytes yield highly contrasting morphologies and Au surface concentrations. We propose that these charged surface layers control galvanic charge transfer by controlling nucleation and diffusion at the deposition front. This surface-directed synthetic strategy can be advantageously used to tailor both overall NP morphology and Au surface concentrations.     

Exploring the interactions between gold nanoparticles and analytes through surface‐assisted laser desorption/ionization mass spectrometry

Surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS) is applied to provide strong evidence for the chemical reactions of functionalized gold nanoparticles (Au NPs) with analytes – Hg²⁺ ions induced MPA?Au NPs aggregation in the presence of 2,6‐pyridinedicarboxylic acid (PDCA) and H₂O₂ induced fluorescence quenching of 11‐MUA?Au NDs. PDCA‐Hg²⁺‐MPA coordination is responsible for Au NPs aggregation, while the formation of 11‐MUA disulfide compounds that release into the bulk solution is responsible for H₂O₂‐induced fluorescence quenching. In addition to providing information about the chemical structures, SALDI‐MS is also selective and sensitive for the detection of Hg²⁺ ions and H₂O₂. The limits of detection (LODs) for Hg²⁺ ions and H₂O₂ by SALDI‐MS were 300 nM and 250 µM, respectively. The spot‐to‐spot variations in the two studies were both less than 18% (50 sample spots). Our results reveal that SALDI‐MS can be used to study analyte‐induced changes in the surface properties of nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface-assisted laser desorption/ionization mass spectrometry with a rotating ball interface

A rotating ball interface for surface‐assisted laser desorption/ionization (SALDI) mass spectrometry was designed and tested. One side of the ball was exposed to atmospheric pressure and the other to the vacuum in a time‐of‐flight mass spectrometer. Analytes (arginine, atenolol, reserpine, tofisopam, and chloropyramine) were applied using electrospray to a silicon substrate on the atmospheric side, the ball was rotated 180°, and the analyte was desorbed on the vacuum side using a pulsed, 200 Hz, 355 nm laser. In order to increase the desorption area, the laser focus was scanned over the substrate in a raster pattern repeated once every second. The design allows for rapid sample throughout with a sample turn‐around time as short as 5 s. Newly produced porous silicon substrates initially yielded very low ion signals, and they required several hundred laser shots to attain maximum sensitivity. In contrast, amorphous silicon did not require such ‘activation’. Quantitative analysis showed a sample‐to‐sample reproducibility of about 10%. The sensitivities with model analytes were in the 1000 to 10 000 ions/fmole range and detection limits in the low fg range. Copyright © 2010 John Wiley & Sons, Ltd.     

采用简易方法合成直接乙醇固体氧化物燃料电池海胆状Pd催化层

在室温下,通过电位置换反应在固体氧化物燃料电池的Ni-YSZ(钇掺杂氧化锆)阳极表面制备海胆状Pd催化层。该催化层的结构和性能通过SEM、XRD和电化学等表征手段进行表征。结果表明,三维纳米花状Pd催化剂是由在Ni-YSZ阳极表面形成的多条纳米棒有序的组合而成。通过在Ni/YSZ阳极表面引入该催化层,相比与传统Ni-YSZ阳极,燃料电池的最高功率和稳定性都获得了很大的提升。该研究表明,电位置换反应是一种很高效的在传统Ni-YSZ阳极表面制备纳米抗积炭的功能层的方法。     

pH sensitive swelling and releasing behavior of nano-gels based on polyaspartamide graft copolymers

Dendritic and porous Ag-Pd alloy nanostructures were successfully fabricated on the surface of silicon substrate using the co-reduction method and galvanic replacement reaction, respectively. The molar compositions of Ag and Pd in the alloy could be modulated by controlling the molar ratios of metal precursors and reaction time. The Ag-Pd alloy nanostructures were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). The morphology and phase of Au-Pd alloy nanostructures were discussed as a function of molar ratios of metal precursors and reaction time. In addition, the morphology and composition-dependent surface-enhanced Raman scattering (SERS) of the as-synthesized Ag-Pd alloy nanostructures were investigated. The SERS enhancement factor was estimated and SERS mapping was performed to prove the homogeneity of these substrates. The results indicate that as-synthesized dendritic and porous Ag-Pd alloy nanostructures are good candidates for SERS spectroscopy.     

低温静电自组装法制备贵金属修饰TiO_2纳米结构薄膜及其增强的光催化性能(英文)

以碱-水热法在金属Ti片上原位生长了TiO2纳米结构(纳米花和纳米线)薄膜,并采用低温静电自组装方法将超细贵金属(金、铂、钯)纳米颗粒均匀沉积于多孔TiO2薄膜上.负载于Ti片上的贵金属/TiO2纳米结构薄膜具有一体化结构、多孔架构和高光催化活性.超高分辨率场发射扫描电子显微镜(FESEM)直接观察表明贵金属纳米颗粒在TiO2表面分布均匀,且颗粒之间相互分离,金、铂、钯纳米颗粒的平均粒径分别约为4.0、2.0和10.0nm.俄歇电子能谱(AES)纵深成分分析表明贵金属不仅沉积于薄膜表面,且大量分布于TiO2纳米结构薄膜内部,其深度超过580 nm.X射线光电子能谱(XPS)分析表明,经300°C下在空气中热处理后,纳米金仍保持金属态,纳米铂部分被氧化成PtOabs,而钯粒子则完全被氧化成氧化钯(PdO).以低温静电自组装法沉积贵金属,贵金属负载量可通过调节组装时间与溶胶pH值来控制.光催化降解甲基橙的结果表明,沉积的纳米金和铂能显著增加TiO2纳米结构薄膜的光催化活性,说明金和铂粒子可促进光生载流子的分离;但负载的PdO对TiO2薄膜的光催化性能增强几乎无作用.     

A General and High‐Yield Galvanic Displacement Approach to Au?M (M=Au,Pd, and Pt) Core–Shell Nanostructures with Porous Shells and Enhanced Electrocatalytic Performances

In this work, we utilize the galvanic displacement synthesis and make it a general and efficient method for the preparation of Au? M (M=Au, Pd, and Pt) core–shell nanostructures with porous shells, which consist of multilayer nanoparticles. The method is generally applicable to the preparation of Au? Au, Au? Pd, and Au? Pt core–shell nanostructures with typical porous shells. Moreover, the Au? Au isomeric core–shell nanostructure is reported for the first time. The lower oxidation states of Au^I, Pd^II, and Pt^II are supposed to contribute to the formation of porous core–shell nanostructures instead of yolk‐shell nanostructures. The electrocatalytic ethanol oxidation and oxygen reduction reaction (ORR) performance of porous Au? Pd core–shell nanostructures are assessed as a typical example for the investigation of the advantages of the obtained core–shell nanostructures. As expected, the Au? Pd core–shell nanostructure indeed exhibits a significantly reduced overpotential (the peak potential is shifted in the positive direction by 44 mV and 32 mV), a much improved CO tolerance (I_f/I_b is 3.6 and 1.63 times higher), and an enhanced catalytic stability in comparison with Pd nanoparticles and Pt/C catalysts. Thus, porous Au? M (M=Au, Pd, and Pt) core–shell nanostructures may provide many opportunities in the fields of organic catalysis, direct alcohol fuel cells, surface‐enhanced Raman scattering, and so forth.     

In Situ Single‐Nanoparticle Spectroscopy Study of Bimetallic Nanostructure Formation

Bimetallic nanostructures (NSs), with utility in catalysis, are typically prepared using galvanic exchange (GE), but the final catalyst morphology is dictated by the dynamics of the process. In situ single nanoparticle (NP) optical scattering spectroscopy, coupled with ex situ electron microscopy, is used to capture the dynamic structural evolution of a bimetallic NS formed in a GE reaction between Ag and [PtCl₆]^2?. We identify an early stage involving anisotropic oxidation of Ag to AgCl concomitant with reductive deposition of small Pt clusters on the NS surface. At later stages of GE, unreacted Ag inclusions phase segregate from the overcoated AgCl as a result of lattice strain between Ag and AgCl. The nature of the structural evolution elucidates why multi‐domain Ag/AgCl/Pt NSs result from the GE process. The complex structural dynamics, determined from single‐NP trajectories, would be masked in ensemble studies due to heterogeneity in the response of different NPs.     

Ion and pH Sensing with Colloidal Nanoparticles: Influence of Surface Charge on Sensing and Colloidal Properties

Ion sensors based on colloidal nanoparticles (NPs), either as actively ion‐sensing NPs or as nanoscale carrier systems for organic ion‐sensing fluorescent chelators typically require a charged surface in order to be colloidally stable. We demonstrate that this surface charge significantly impacts the ion binding and affects the read‐out. Sensor read‐out should be thus not determined by the bulk ion concentration, but by the local ion concentration in the nano‐environment of the NP surface. We present a conclusive model corroborated by experimental data that reproduces the strong distance‐dependence of the effect. The experimental data are based on the capability of tuning the distance of a pH‐sensitive fluorophore to the surface of NPs in the nanometer (nm) range. This in turn allows for modification of the effective acid dissociation constant value (its logarithmic form, pK_a) of analyte‐sensitive fluorophores by tuning their distance to the underlying colloidal NPs.     

Laser desorption/ionization mass spectrometry on porous silica and alumina for peptide mass fingerprinting

We investigated a variant of desorption/ionization on porous silicon (DIOS) mass spectrometry utilizing an aqueous suspension of either porous silica gel or porous alumina (pore size of 60 and 90 A, respectively). Laser desorption/ionization (LDI) from samples directly deposited on a stainless steel surface without any inorganic substrates was also achieved. Synthetic peptides designed to cover large sequence diversity constituted our model compounds. Sample preparation, including material conditioning, peptide solubilization, and deposition protocol onto standard matrix-assisted laser desorption/ionization (MALDI) probe, as well as ionization source tuning were optimized to perform sensitive reproducible LDI analyses. The addition of either a cationizing agent or an alkali metal scavenger to the sample suspension allowed modification of the ionization output. Comparing hydrophilic silica gel to hydrophobic reversed-phase silica gel as well as increasing material pore size provided further insights into desorption/ionization processes. Furthermore, mixtures of peptides were analyzed to probe the spectral suppression phenomenon when no interfering organic matrix was present. The results gathered from synthetic peptide cocktails indicated that LDI mass spectrometry on silica gel or alumina constitutes a promising complementary method to MALDI in proteomics for peptide mass fingerprinting.     

Functionalized pyrolytic highly oriented graphite polymer film for surface‐assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low‐mass analytes in environmental analysis by surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI‐MS using oxidized PGS (PGS‐SALDI‐MS) can be used to detect [M–H]^? ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten‐fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS‐SALDI‐MS and the calibration curve showed a wide linear dynamic range of response (20–1000 ppb). The combination of atmospheric pressure ionization and PGS (AP‐PGS‐SALDI) showed greater signal intensity than vacuum PGS‐SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4‐hydroxy‐2‐chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS‐SALDI‐MS. In addition, we found that nonafluoro‐1‐butanesulfonic acid was able to produce protonated peptides in positive ion PGS‐SALDI‐MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Fabrication of Trimetallic Pt−Pd−Co Porous Nanostructures on Reduced Graphene Oxide by Galvanic Replacement: Application to Electrocatalytic Oxidation of Ethylene Glycol

In present work, reduced graphene oxide nanosheets (rGO) decorated with trimetallic three‐dimensional (3D) Pt−Pd−Co porous nanostructures was fabricated on glassy carbon electrode (Pt−Pd−Co/rGO/GCE). First, GO suspension was drop‐casted on the electrode surface, then GO film reduction was carried out by cycling the potential in negative direction to form the rGO film modified GCE (rGO/GCE). Then, electrodeposition of the cobalt nanoparticles (CoNPs) as sacrificial seeds was performed onto the rGO/GCE by using cyclic voltammetry. Afterward, Pt−Pd−Co 3D porous nanostructures fabrication occurs through galvanic replacement (GR) method based on a spontaneous redox process between PtCl₂, PdCl_2, and CoNPs. The morphology and structure of the Pt−Pd−Co/rGO porous nanostructure film was characterized by scanning electron microscopy, energy dispersive spectroscopy and X‐ray diffraction method. The performance of the prepared electrode was investigated by various electrochemical methods including, cyclic voltammetry and electrochemical impedance spectroscopy. The electrocatalytic activity of the as‐prepared modified electrode with high surface areas was evaluated in anodic oxidation of ethylene glycol. The study on electrocatalytic performances revealed that, in comparison to various metal combinations in modified electrodes, trimetallic Pt−Pd−Co/rGO/GCE exhibit a lower onset potential, significantly higher peak current density, high durability and stability for the anodic oxidation of ethylene glycol. The excellent performances are attributed to the rGO as catalysts support and resulting synergistic effects of the trimetallic and appropriate characteristics of the resulted 3D porous nanostructures. Moreover, the influence of various concentrations of ethylene glycol, the potential scan rate and switching potential on the electrode reaction, in addition, long‐term stability have been studied by chronoamperometric and cyclic voltammetric methods.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.