Representative applications of heparin-sepharose in the removal of polyamines from biological materials

Many experimental systems would greatly benefit from the availability of a simple and effective technique to remove polyamines from biological materials. We have examined the possibility of utilizing heparin-sepharose in the removal of polyamines from rat heart mitochondria, DNA-spermine complex, and fetal calf serum. Heparin-sepharose removes 90% of spermine adsorbed to the cytoplasmic surface of rat heart mitochondria. Heparin-sepharose almost totally removes spermine from DNA-spermine complex, leaving less than 0.003 mol spermine/mol DNA phosphorus. Heparin-sepharose is highly effective in removing spermine and spermidine (99.5 and 95% adsorbed, respectively) from fetal calf serum. Under the same experimental conditions only 50% of putrescine is adsorbed. A higher amount of resin corresponding to an increased capacity for putrescine must be used to achieve a satisfactory removal of putrescine.     

Determination of the polyamine content of rat heart mitochondria by the use of heparin-sepharose

Heparin-sepharose has been utilized to remove polyamines adsorbed to the cytoplasmic surface of rat heart mitochondria. The results obtained can be summarized as follows: Heparin-sepharose removes 90% of the spermine, 98% of the spermidine, and 98% of the putrescine adsorbed. Polyamine contents of chromatographed mitochondria amount to 2.66 and 0.36 nmol spermine and spermidine, respectively, per mg of mitochondrial protein.     

TLC Determination of Aliphatic Polyamines on Calcium Sulfate Layers

Biogenic polyamines are sensitive markers for various diseases including cancer. Polyamines are difficult to analyze by chromatography due to their high polarity and water-solubility so that derivatization is an essential step for their chromatographic analysis. Earlier studies have shown the efficacy of calcium sulfate (CaSO₄) as a TLC coating material for the separation of polar compounds. The aim of this study was to explore the potential of CaSO₄ for the analysis of aliphatic polyamines without derivatization. The TLC of six polyamines (ornithine, citrulline, putrescine, cadaverine, spermidine and spermine) was carried out on CaSO₄ and silica gel plates using 11 different mobile phases. The results showed that CaSO₄ is superior to silica for the separation of underivatized polyamines. The development time of the CaSO₄ plates was also about one-third shorter as compared to silica. Methanol was the only solvent to produce differential R _F values for the polyamines studied. Ornithine (R _F , 0–2) and citrulline (R _F , 1–3) were separated from cadaverine (R _F , 0.93), spermine (R _F , 0.85) and spermidine (R _F , 0.85). For quantitative analysis, the polyamines were eluted from the coating material scratched from the plate and the absorbance of the supernatant was measured at 550 nm. The limits of detection (LOD) and quantification (LOQ) were found to be 0.75 and 1.88 μg, respectively. The procedure was applied to the quantitative separation of polyamines in spiked human urine samples (12.5–50 μg). This is probably the first study reporting a TLC method for the separation of underivatized polyamines.     

Interaction of spermine,spermidine, and putrescine with heparin bound to sepharose beads

The binding of the polyamines spermine and spermidine, and of their precursor, putrescine, to heparin-sepharose have been investigated to provide the basic data for further application of this resin in the study of polyamine biological function.

1. Spermine binds heparin-sepharose in a cooperative phase, the empirical index of cooperativity is two, and the apparent binding constant is 1.41 × 10⁶ M^-1.
2. Spermidine binds heparin-sepharose in a cooperative and strong noncooperative phase. In the cooperative phase, the index of cooperativity is two and the apparent binding constant is 1.56 × 10⁶ M^-. In the strong noncooperative phase, the apparent binding constant is 2 × 10⁵ M^-1.
3. Putrescine binds heparin-sepharose in a strong noncooperative and a weak noncooperative phase. In the strong noncooperative phase the apparent binding constant is 2.6 × 10⁵ M^-1. In the weak noncooperative phase, the apparent binding constant is 3.2 × 10³ M^-1.

     

The Effect of Different Aqueous Ionic Media on the Acid-Base Properties of Some Open Chain Polyamines

Acid-base properties of some open-chain polyamines (ethylenediamine, diethylenetriamine, triethylenetetramine, spermine, tetraethylenepentamine and pentaethylenehexamine) were studied at different ionic strengths in different aqueous ionic media at 25 °C. Measured were: (i) the protonation constants of triethylenetetramine, tetraethylenepentamine and pentaethylenehexamine from potentiometric measurements [0 ≤I≤2.5 mol⋅L⁻¹ in NaCl and (CH₃)₄NCl)]; and (ii) protonation enthalpies of ethylenediamine, diethylenetriamine, and spermine from calorimetric measurements [NaCl: 0≤I≤1 mol⋅kg⁻¹ for ethylenediamine, diethylenetriamine, 0 ≤I≤2 mol⋅kg⁻¹ for spermine; (C₂H₅)₄NI: 0≤I≤1 mol⋅kg⁻¹; (CH₃)₄NCl: 0 ≤I≤2.5 mol⋅kg⁻¹ only for diethylenetriamine]. Previously published protonation data for these polyamines in aqueous NaCl, (CH₃)₄NCl and (C₂H₅)₄NI, were also examined. The general trends for the Gibbs energy and entropic contributions are, for ΔG: NaCl>(CH₃)₄NCl>(C₂H₅)₄NI, and for TΔS: (C₂H₅)₄NI>(CH₃)₄NCl>NaCl. This trend is more pronounced for the first protonation step. The dependences of these quantities on ionic strength were modeled with the SIT (Specific ion Interaction Theory) equations, and differences found among the different media were interpreted in terms of weak complex formation.     

Determination of polyamines in human plasma by high‐performance liquid chromatography coupled with Q‐TOF mass spectrometry

A high‐performance liquid chromatography coupled with Q‐time of flight mass spectrometry (HPLC/Q‐TOF MS) method was developed and validated for the determination of 1, 3‐diaminopropane, putrescine, cadaverine, spermidine and spermine in human plasma. The plasma samples were first pretreated by 10% HClO₄ and then derived by benzoyl chloride with 1, 6‐diaminohexane as internal standard. The derived polyamines were separated on a C₁₈ column using a gradient program. The detection was performed on a Q‐TOF MS by positive ionization mode. Calibration curve for each polyamine was obtained in the concentration range of 0.4 ~ 200.0 ng ? ml^?1, with limit of detection of 0.02 ~ 0.1 ng ? ml^?1. The intra‐ and inter‐day RSD for all polyamines were 2.5–14.0% and 2.9 ~ 13.4%, respectively. The method was applied to determine the polyamines in human plasma from cancer patients and healthy volunteers. Results showed that the mean levels of polyamines in the plasma of cancer patients were higher than that of healthy volunteers, which suggested that the plasma polyamines could be employed as cancer diagnostic indicators in clinical testing. Copyright © 2012 John Wiley & Sons, Ltd.     

Interactions of a water-soluble calix[4]arene with spermine: solution and solid-state characterisation

Abstract

The octaanionic 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)-calix[4]arene (cone conformation) (C₄TsTc) was investigated as a sensor for the biogenic tetracationic polyamine, spermine _.(H₄Spe⁴⁺). Fluorescence titration experiments of the water-soluble calixarene with spermine showed the formation of the 2:1 and 1:1 calixarene:spermine complexes in solution. The single crystal X-ray diffraction analysis of [(NaC₄TsTc)₄·(H₄Spe)₇] confirmed the formation of 2:1 and 1:1 calixarene:spermine species and showed that the water-soluble calixarene binds the spermine either by partially hosting it in the inner cavity or through the carboxylate groups on the lower rim. In order to investigate the effect of multivalent systems, supramolecular assemblies of octaanionic calixarene molecules templated by meso-tetrakis(4-N-methylpyridyl)porphyrin (H₂T₄) in different stoichiometric porphyrin:calixarene ratios (1:4 and 3:4) were also tested for spermine binding in solution. Fluorescence titration experiments with the 1:4 and 3:4 H₂T₄:C₄TsTc supramolecular complexes showed that the multivalent assemblies are more sensitive to the presence of spermine than the calixarene alone.     

A mass spectrometric method to determine activities of enzymes involved in polyamine catabolism

An analytical method for the determination of three polyamines (putrescine, spermidine, and spermine) and five acetylpolyamines [N¹-acetylspermidine (N¹AcSpd), N⁸-acetylspermidine (N⁸AcSpd), N¹-acetylspermine, N¹,N⁸-diacetylspermidine, and N¹,N¹²-diacetylspermine] involved in the polyamine catabolic pathway has been developed using a hybrid tandem mass spectrometer. Heptafluorobutyryl (HFB) derivatives of these compounds and respective internal standards labeled with stable isotopes were analyzed simultaneously by TOF MS, based on peak areas appearing at appropriate m/z values. The isomers, N¹AcSpd and N⁸AcSpd were determined from their fragment ions, the acetylamidopropyl and acetylamidobutyl groups, respectively, using MS/MS with ¹³C₂-N¹AcSpd and ¹³C₂-N⁸AcSpd which have the ¹³C₂-acetyl group as an internal standard. The TOF MS method was successfully applied to measure the activity of enzymes involved in polyamine catabolic pathways, namely N¹-acetylpolyamine oxidase (APAO), spermine oxidase (SMO), and spermidine/spermine N¹-acetyltransferase (SSAT). The following natural substrates and products labeled with stable isotopes considering the application to biological samples were identified; for APAO, [4,9,12-¹⁵N₃]-N¹-acetylspermine and [1,4,8-¹⁵N₃]spermidine (¹⁵N₃-Spd), respectively; for SMO, [1,4,8,12-¹⁵N₄]spermine and ¹⁵N₃-Spd, respectively; and for SSAT, ¹⁵N₃-Spd and [1,4,8-¹⁵N₃]-N¹-acetylspermidine, respectively.     

Synthese von selektiv N- funktionalisierten Polyamin-Derivaten

Synthesis of Selectively N-Functionalized Polyamine Derivatives A threefold differently protected derivative 8 of the triamine spermidine ( 2 ) has been prepared in three steps starting from propane-1,3-diamine ( 1 ). The protected spermidine derivative 8 was converted to its spermine analogue 12 , a useful polyamine intermediate. In a convergent way, the fourfold differently protected derivative 18 of the tetraamine spermine ( 3 ) has been obtained by coupling the two different and separately prepared propane-1,3-diamine units 15 and 17 . Spermidine derivative 19 and spermine derivative 20 , both selectively protected at both primary amino groups, have been Prepared from the free polyamines 2 and 3 , respectively, in a direct approach.     

On the morphology of polystyrene fractions,obtained by a multistep procedure from a radically polymerized sample

Summary A polystyrene sample obtained by free radical polymerization has been fractionated by preparative scale GPC and the structure and morphology of the fractions have been studied by¹³C-NMR spectroscopy, DSC and X-ray measurements. No changes in morphology in the course of fractionation have been obeyed. A distribution of syndiotacticity within the molecular weight distribution does not exist.

---

Zusammenfassung Eine Polystyrolprobe, die durch radikalische Polymerisation hergestellt wurde, wurde mit Hilfe der präparativen Gelpermeationschromatographie fraktioniert; die Struktur und Morphologie der Fraktionen wurde mit¹³C-NMR-Spektroskopie, DSC und Röntgenbeugung untersucht. Im Verlauf der Fraktionierung traten keine Änderungen der Morphologie der Fraktionen auf. Innerhalb der Molekulargewichtsverteilung existiert keine Verteilung der Syndiotaktizität.

---

List of abbrevations and symbols AIBN a, a-Azo-bis-(iso-butyronitrile) - D Dispersity, M _w /M _n - DSC Differential scanning calorimetry - EF Efficiency of fractionation - GPC Gel permeation chromatography - m mass of the fraction - M mass of the fractionated polymer sample - MWD Molecular weight distribution - P _r content of racemic dyads - PS Polystyrene - THF Tetrahydrofuran - U D-1 - U _ss U of the starting sample - U _f U of the fraction Auszug aus der Dissertation von U.-D. Standt: Zur Morphologie von Polystyrol, TU Braunschweig 1981.     

Determination of polyamines in human urine by precolumn derivatization with benzoyl chloride and high-performance liquid chromatography coupled with Q-time-of-flight mass spectrometry

A simple and sensitive HPLC/Q-TOF MS method for simultaneous determination of 1,3-diaminopropane, putrescine, cadaverine, spermidine, spermine and acetyl-spermine in human urine was developed in electrospray-ionization source by positive ion mode. The samples were firstly pretreated by 10% HClO₄ and then derivatized by benzoyl chloride with 1,6-diaminohexane as internal standard. The derived polyamines were separated on a C₁₈ column by a gradient elution with methanol-water, and then sensitively detected with Q-TOF MS. The limits of detection for polyamines ranged from 0.02 to 1.0 ng ml⁻¹ with excellent linearity within the range from 1 to 1000 ng ml⁻¹ except acetyl-spermine from 5 to 1000 ng ml⁻¹. The intra- and inter-day R.S.D. for all polyamines were 2.0-14.7% and 3.9-12.9%, respectively. The method was applied to determine the polyamines in human urine from 10 cancer patients and 15 healthy volunteers. Results showed that the mean levels of polyamines in urine of patients were all higher than those in healthy volunteers. The cluster analysis was used to establish the distinction mode between cancer sufferers and healthy individuals.     

Determination of protonation constants of some fluorinated polyamines by means of <Superscript>13</Superscript>C NMR data processed by the new computer program HypNMR2000. Protonation sequence in polyamines

The pK_a values of 6-fluoro-4,8-diazadodecane-1,12-diamine (6-fluorospermine) (1), 6,6-difluoro-4,8-diazadodecane-1,12-diamine (6,6-difluorospermine) (2), 6-fluoro-4-azaoctane-1,8-diamine (6-fluorospermidine) (3) and 6,6-difluoro-4-azaoctane-1,8-diamine (6,6-difluorospermidine) (4) in D₂O solution have been determined at 40 °C from ¹³C NMR chemical shifts data using the new computer program HypNMR2000. The enthalpies of protonation of compounds 1–4 and the parent amines spermine (5) and spermidine (6) have been determined from microcalorimetric titration data. The values of H° were used to derive basicity constants relative to 25 °C. The NMR data have been analysed by two different methods to obtain information on the protonation sequence in the polyamines 1–5. The protonation sequence for spermine is related to its biological activity.Abbreviations PKC Protein kinase C - PS Phosphatidylserine - VB Microsoft Visual BasicPresented at the Spanish-Italian Congress on the Thermodynamics of Metal Complexes, Santiago de Compostela, Spain, June 2–6, 2002     

Determination of polyamines in urine via electrospun nanofibers–based solid-phase extraction coupled with GC-MS and application to gastric cancer patients

The simultaneous determination of polyamines and their metabolites in urine samples was achieved by gas chromatography–mass spectrometry in the selected ion monitoring mode. After conjugating with the ion-pair reagent bis-2-ethylhexylphosphate in the aqueous phase, the polyamines in the samples were extracted with polystyrene nanofiber-based packed-fiber solid-phase extraction followed by a derivatization step using pentafluoropropionyl anhydride. With optimal conditions, all analytes were separated well. For analytes of putrescine, cadaverine, N-acetylputrescine, and N-acetylcadaverine, the linearity was good in the range of 0.05–500 μmol/L (R² ≥ 0.993). While for spermidine, spermine, acetylspermidine, N⁸-acetylspermidine, and N-acetylspermine, the linearity was good in the range of 0.5–500 μmol/L (R² ≥ 0.990). The recoveries of three spiked concentrations (0.5, 5, 300 μmol/L) were 85.6%–108.4%, and relative standard deviations for intra- and interday were in the range of 2.9%–13.4% and 4.5%–15.1%, respectively. The method was successfully applied to the analysis of urine samples of gastric cancer patients. The results showed that the levels of most polyamines and N-acetylated polyamines from the patient group were significantly higher than those from the control group. The altered concentrations of the above-mentioned metabolites suggest their role in the pathogenesis of gastric cancer, and they should be further evaluated as potential markers of gastric cancer.     

A quantitative analysis of the polyamine in lung cancer patient fingernails by LC‐ESI‐MS/MS

A quantitative analysis of polyamines in lung cancer patient fingernails by the combination of 4‐(N,N‐dimethylaminosulfonyl)‐7‐fluoro‐2,1,3‐benzoxadiazole derivatives and liquid chromatography–electrospray ionization tandem mass spectrometry is described. The reaction of the reagent with eight kinds of polyamines, that is, N¹‐acetylputrescine (N¹‐actPUT), N⁸‐acetylspermidine, N¹‐acetylspermine, 1,3‐diaminopropane, putrescine (PUT), cadaverine, spermidine and spermine (SPM) effectively occurs at 60 °C for 30 min. The detection limits (signal‐to‐noise ratio 5) were 5–100 fmol. A good linearity was achieved from the calibration curves, which was obtained by plotting the peak area ratios of the analytes relative to the internal standard (IS), that is, 1,6‐diaminohexane, vs the injected amounts of polyamines (r² > 0.996), and the intra‐day and inter‐day assay precisions were <9.84%. Furthermore, the recoveries (%) of the polyamines spiked in the human fingernails were 89.14–110.64. The present method was applied to human fingernail samples from 17 lung cancer patients and 39 healthy volunteers. The polyamine concentration was different based on the gender, that is, the N¹‐actPUT and PUT contents were 3.10 times and 2.56 times higher in healthy men than in women, respectively. Additionally, in the lung cancer patient group, as compared with the healthy volunteers, the concentrations of SPM had a statistically significant (p < 0.05) correlation. Therefore, because the proposed method provides a good mass accuracy and the trace detection of the polyamines in human fingernails, this analytical technique could be a noninvasive technique to assist in the diagnosis and assessment of disease activity in lung cancer patients. Copyright © 2013 John Wiley & Sons, Ltd.     

Purification and Characterization of a Novel Heparin Degrading Enzyme from <Emphasis Type="Italic">Aspergillus flavus</Emphasis> (MTCC-8654)

A heparinase-producing fungus was isolated, and the strain was taxonomically characterized as Aspergillus flavus by morphophysiological and 26S rRNA gene homology studies. The culture produced intracellular heparinase enzyme, which was purified 40.5-fold by DEAE-Sephadex A-50, CM-Sephadex C-50, and Sephadex G-100 column chromatography. Specific activity of the purified enzyme was found to be 44.6 IU/μg protein and the molecular weight of native as well as reduced heparinase was 24 kDa, showing a monomeric unit structure. Peptide mass spectrum showed poor homogeneity with the database in the peptide bank. The enzyme activity was maximum at 30 °C in the presence of 300 mM NaCl at pH 7.0. In the presence of Co²⁺, Mn²⁺ ions, and reducing agents (β-mercaptoethanol, dithiothreitol), enzyme activity was enhanced and inhibited by iodoacetic acid. These observations suggested that free sulfohydryl groups of cysteine residues were necessary for catalytic activity of the enzyme. The enzyme was also inhibited by histidine modifier, DEPC, which suggests that along with cysteine, histidine may be present at its active site. The enzyme showed a high affinity for heparin as a substrate with K _m and V _max as 2.2 × 10⁻⁵ M and 30.8 mM min⁻¹, respectively. The affinity of the enzyme for different glycosaminoglycans studied varied, with high substrate specificity toward heparin and heparin-derived polysaccharides. Depolymerization of heparin and fractionation of the oligosaccharides yielded heparin disaccharides as main product.     

Synthesis and preliminary evaluation of 99mTc-spermine as a tumor imaging agent

Polyamines are essential for the growth and survival of all cells with biosynthesis and transportation of polyamines being very active in tumors. With the aim of developing a new tumor imaging agent, the endogenous polyamine, spermine was labeled with ^99mTc, and its characters were also evaluated via in vitro and in vivo studies. ^99mTc-labeled spermine probe (^99mTc-spermine) was synthesized by the direct pretinning procedure and the labeling procedure was optimized with regard to the pH, reaction time, amounts of spermine and SnCl₂. The stability of the ^99mTc-spermine and its capacity to accumulate into 4T1 tumor cells were also evaluated. Biodistribution of ^99mTc-spermine was studied in 4T1 tumor-bearing mice. In the optimal conditions, the whole radiosynthesis was accomplished within 10 min with a decay-corrected yield of 96.5 ± 1.3 % and radiochemical purity of >95 %.^99mTc-spermine was stable at both 37 and 4 °C for at least 6 h. In vitro tests revealed that the ability of ^99mTc-spermine to penetrate in 4T1 tumour cells and an excess of spermine blocked the accumulation of the compound in the models. Biodistribution studies showed a high tumor uptake peaked at 30 min post-injection with 1.82 ± 0.19 % ID%/g. The tumor to muscle uptake ratios of the probe were 3.60 ± 0.51, 4.48 ± 0.29, 4.82 ± 0.18, 5.64 ± 0.10, respectively at 30 min, 1, 2 and 4 h postinjection. Block studies indicated that ^99mTc-spermine had specific binding of tumor via polyamine transport systems. ^99mTc-spermine is a promising radiopharmaceutical in tumor imaging. Further studies are required to determine the usability of ^99mTc–spermine for diagnosis purposes.     

Chain scission in polystyrene by impact fracture

The number of chain scissions n_s per unit fracture area by impact in high-molecular weight polystyrene is determined to be approximately 3.3 × 10¹⁴/cm² at room temperature. This is almost 20 times larger than would be expected if chain scissions took place only at, or very close to, fracture surfaces. This result was obtained by measuring the molecular weight decrease and the total fracture area of the impact fragments by using size exclusion chromatography and statistical particle size measurements, respectively. The large n_s strongly indicates that significant chain breakage occurs during crazing before the propagation of cracks. An average craze thickness before breakdown under impact is estimated from n_s to be around 2 μm. In a diluted polymer, n_s is found to be significantly lower than the extrapolated value, assuming a linear dilution of entangled chain crossings at the fracture surface. This low chain scission density, however, can be explained by taking into account the reduction of craze breakdown strain in the diluted polymers. Finally, the broken chain ends of polystyrene appear to be stable under ambient conditions. © 1992 John Wiley & Sons, Inc.     

A multi-pumping flow system with on-line photochemical conversion and improved sensitivity for phosphorus fractionation in freshwaters

A flow-based procedure with solenoid micro-pumps was developed for phosphorus fractionation (dissolved organic and inorganic phosphorus) in freshwaters. The spectrophotometric detection was based on the formation of molybdenum blue and the organic species were on-line photo-converted to orthophosphate. The analytical response was linear within 10 and 75?µg?L^?1 with a detection limit of 2.0?µg?L^?1 (99.7% confidence level). Coefficient of variation of 1.8% (50?µg?L^?1 P, n?=?20) and sampling rate of 40 determinations per hour were achieved. Per determination, 160?µg (NH₄)₆Mo₇O₂₄, 10?µg SnCl₂, 640?µg K₂S₂O₈ and 10?mg NaOH were consumed, generating 2.0?mL of waste. Slopes of analytical curves obtained for four different organic phosphorus species agreed with those obtained for orthophosphate, indicating quantitative conversion. The results for freshwater samples agreed with those obtained by the AOAC reference procedure at 95% confidence level. The organic matter did not interfere in the photo-oxidative process. The proposed procedure is a fast and environmentally friendly alternative for the phosphorus fractionation in freshwaters.     

Synthesis and characterization of a novel organic–inorganic hybrid salt and its application as a highly effectual Brønsted–Lewis acidic catalyst for the production of N,N′‐alkylidene bisamides

In this research, a novel organic–inorganic hybrid salt, namely, N¹,N¹,N²,N²‐tetramethyl‐N¹,N²‐bis(sulfo)ethane‐1,2‐diaminium tetrachloroferrate ([TMBSED][FeCl₄]₂) was prepared and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), elemental mapping, field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), thermal gravimetric (TG), differential thermal gravimetric (DTG), and vibrating‐sample magnetometry (VSM) analyses. Catalytic activity of the hybrid salt was tested for the synthesis of N,N′‐alkylidene bisamides through the reaction of benzamide (2 eq.) and aromatic aldehydes (1 eq.) under solvent‐free conditions in which the products were obtained in high yields and short reaction times. The catalyst was superior to many of the reported catalysts in terms of two or more of these factors: the reaction medium and temperature, yield, time, and turnover frequency (TOF). [TMBSED][FeCl₄]₂ is a Brønsted–Lewis acidic catalyst; there are two SO₃H groups (as Brønsted acidic sites) and two tetrachloroferrate anions (as Lewis acidic sites) in its structure. Highly effectiveness of the catalyst for the synthesis of N,N′‐alkylidene bisamides can be attributed to synergy of the Brønsted and Lewis acids and also possessing two sites of each acid.     

Synthesis and characterization of nickel(II) complexes with three potentially hexadentate Schiff-base ligands and polyamines: X-ray crystal structure determination of one nickel(II) complex

Three new potentially hexadentate N₄O₂ Schiff-base ligands (H₂L¹, H₂L² and H₂L³) were prepared from the reaction of the polyamines N,N′-bis(2-aminophenyl)-1,2-ethanediamine (L¹), N,N′-bis(2-aminophenyl)-1,3-propanediamine (L²) and N,N′-bis(2-aminophenyl)-1,4-butanediamine (L³), respectively with salicylaldehyde. Reaction of the Schiff bases with Ni(II) salts in the presence of N(Et)₃ gave the neutral complexes [NiL⁴], [NiL⁵] and [NiL⁶]. Ni(II) complexes of the polyamines were also prepared. One of complexes [Ni(L¹)(MeCN)₂](ClO₄)₂·MeCN has been characterized through X-ray diffraction methods.