Embedding of individual ferritin molecules in large, self-supporting silica nanofilms

We report herein the fabrication of ferritin-embedded self-supporting silica nanofilms via a simple spin-coating process. Ferritin was employed as a template molecule, and solutions of ferritin and silica were spread on a polymer-coated silicon substrate, in this order. After dissolving the polymer underlayer by simply immersing ethanol, a centimeter-sized self-supporting nanofilm of ferritin/silica composite with a thickness of 15 nm was successfully transferred onto an alumina membrane without the film breaking. Ozone and hydrochloric acid solution treatment removed the template ferritin molecules from the composite film to produce corresponding transmembrane nanoholes. The reported method is very simple, and the fabrication of a protein-embedded self-supporting nanofilm enables the design of biomembrane-mimetic devices.     

Highly sensitive detection of transient absorption in dye-doped ultrathin polymer films by the TiO(2)/K(+) composite optical waveguide method upon pulsed laser excitation

A composite optical waveguide (OWG) composed of a 10–18 nm thick titanium dioxide (TiO₂) film sputtered on a conventional K⁺-doped optical waveguide was first applied to detect transient absorption of organic dyes in ultrathin polymer films upon excitation with ns laser. The thickness of the TiO₂ film considerably affected the relative sensitivity of the composite OWG. The composite OWG with 10 nm thick TiO₂ gave much stronger transient absorption for 30–415 nm thick polymer films containing organic dyes than that with 18 nm TiO₂. Transient absorption of phthalocyanine and spiropyran in 20–135 nm thick polymer films was detected 3–20 times more sensitively by the composite OWG with 10 nm TiO₂ than the conventional K⁺-doped OWG which showed a 150-fold sensitivity as compared with the usual normal incidence method. The relative sensitivity of the composite waveguide was also affected by the thickness and refractive index of polymers.     

Structures and chromatographic characteristics of capsule-type silica gels coated with hydrophobic polymers in reversed-phase liquid chromatography

Summary Silicone polymer-coated silica gels modified with octadecyl and octyl groups (S/S-C₁₈, S/S-C₈), or “capsule-type silica gels” were developed as packing materials for reversed-phase liquid chromatography. They were obtained by coating the surface of totally porous silica gel with a homogeneous silicone polymer film, and thereafter modifying the coating polymer with octadecyl or octyl groups. Retaining the advantages of silica-based packings, they show strong resistance of alkali-like organic porous polymeric materials.     

Synthesis and characterization of stable polymer-coated C8 stationary phase with high durability under extreme pH conditions for high-performance liquid chromatography

A highly chemically stable polymer-coated silica-based C8 stationary phase was developed by combining modification with octyl groups and a polymer coating technology. The stationary phase was prepared by the following procedure: (1) introduction of octyl groups to the silica surface; (2) coating the C8 silica with a silicone polymer. 29Si solid-state NMR spectra indicated that a silicone polymer reacted not only with residual silanol groups on the silica surface, but with those generated from silanes used for the introduction of octyl groups. Column durability was evaluated with an acidic mobile phase (60 degrees C, pH 1) and a basic mobile phase (50 degrees C, pH 10) in accelerated damaging conditions. The C8 phase showed a high durability under both conditions.     

Use of short-end injection capillary packed with a glycopeptide antibiotic stationary phase in electrochromatography and capillary liquid chromatography for the enantiomeric separation of hydroxy acids

A new chiral stationary phase (CSP) was prepared by reacting MDL 63,246 (Hepta-Tyr), a glycopeptide antibiotic belonging to the teicoplanin family, with 5-μm diol-silica particles. The CSP mixed with 5-μm amino silica particles (3:1) was packed into 75-μm fused-silica capillaries for only 6.6 cm and used for electrochromatographic experiments analyzing several hydroxy acid enantiomers. A reversed electroosmotic flow carried both analytes and mobile phase towards the anode in a short time (1–3 min), being baseline resolved all the studied analytes. In order to achieve the fastest enantiomeric resolution of the studied hydroxy acids, the effect of several experimental parameters such as mobile phase composition (organic modifier type and concentration, pH of the buffer and ionic strength), capillary temperature and applied voltage on enantioresolution factor, retention time, enantioselectivity were evaluated. The packed capillary column allowed the separation of mandelic acid enantiomers in less than 72 s with resolution factor R_s=2.18 applying a voltage of 30 kV and eluting with a mobile phase composed by 50 mM ammonium acetate (pH 6)–water–acetonitrile (1:4:5, v/v). The CSP was also tested in the capillary liquid chromatography mode resolving all the studied enantiomers applying 12 bar pressure to the mobile phase [50 mM ammonium acetate (pH 6)–water–methanol–acetonitrile, 1:4:2:3, v/v)], however, relatively long analysis times were observed (12–20 min).     

Stability of self-assembled polymer films investigated by optical laser reflectometry

We studied the influence of post-treatment rinsing after the formation of self-assembled polyelectrolyte films made with the weak base poly(allylamine hydrochloride) (PAH) and the strong acid poly(styrene sulfonate) (PSS). The stability of the film was studied using optical fixed-angle laser reflectometry to measure the release of polymeric material and AFM experiments to reveal the change of morphology and thickness. We found that the polymer films were stable upon rinsing when the pH was the same in the solution as that used in the buildup (pH 9). The films released most of the polymeric material when rinsed at higher pH values, but a layer remained that corresponded to a PAH monolayer directly bound with the silica surface. Films containing at least four bilayers were stable upon rinsing at lower pH values, but the stability of thinner films depended on the type of the last polymer deposited. They were stable in the case of PSS as an outermost deposit, but they released a large part of their material in the case of PAH. The stability results were determined using a simple model of the step-by-step assembly of the polymer film described formerly.     

Sunna dosimeter: an integrating photoluminescent film and reader system; work in progress

A new radiation dosimeter, consisting of an optically-stimulated polymer film containing a photofluorescent sensor, can serve as a routine dosimeter and radiographic imaging medium for high-dose applications in the absorbed dose range 0.1–100 kGy. The flexible, colorless, opalescent film having a uniform thickness of 0.240 (±0.005) mm or certain other films in the thickness range 0.08–0.60 mm, are available in large batches. They can be read rapidly with a simple table-top spectrofluorimeter, excitation wavelength (λ=450 nm) and emission wavelength (λ=670 nm), giving a type A uncertainty of dose evaluation of <±5% at 95% confidence level. It supplies either single integrated dose readings or two-dimensional radiographic images with relatively high spatial resolution. The present work focuses on the following gamma-ray response characteristics of the system: inter- and intra-batch reproducibility, pre- and post-irradiation stability, and dependence of dose interpretations on absorbed dose rate and irradiation temperature.     

Preparation of core-shell microporous organic polymer-coated silica microspheres for chromatographic separation and N-glycopeptides enrichment

Through a “one-pot” strategy, a layer of microporous organic polymer was coated onto the surface of monodisperse amino-functionalized silica microsphere via amino-aldehyde condensation reaction with core-shell structure. The change in chemical structure of material before and after modification was determined by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Due to existence of a large number of amino and aldehyde groups in microporous organic polymer shell, the water contact angle decreased from 56.8° (silica microspheres) to 34.7° (microporous organic polymer-coated silica microspheres). Based on these properties, microporous organic polymer-coated silica microspheres were employed as the stationary phase for capillary liquid chromatography and successfully offered baseline separation of polar small molecules. Additionally, the material could also be served as the sorbent of hydrophilic interaction chromatography to enrich glycopeptides from human serum digest. A total of 470 unique N-glycopeptides and 342 N-glycosylation sites mapped to 112 N-glycosylated proteins were unambiguously identified from 2 μL of human serum, exhibiting a promising application prospect of microporous organic polymer-coated silica microspheres in the pretreatment of proteomics samples.     

Stability of polypeptide multilayers as studied by in situ ellipsometry: effects of drying and post-buildup changes in temperature and pH

Polyelectrolyte multilayers (PEM) of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) with an initial layer of polyethyleneimine (PEI) were built on silica and titanium surfaces using the layer-by-layer (LbL) technique. The stability of the film during drying/rewetting, temperature cycles, and pH shifts was studied in situ by means of ellipsometry. The film thickness was found to decrease significantly (approximately 70%) upon drying, but the original film thickness was regained upon rewetting, and the buildup could be continued. The thickness in the dry state was found to be extremely sensitive to ambient humidity, needing several hours to equilibrate. Changes in temperature and pH were also found to influence the multilayer thickness, leading to swelling and deswelling of as much as 8% and 10-20% respectively. The film does not necessarily regain its original thickness as the pH is shifted back, but instead shows clear signs of hysteresis.     

Enzymatic—spectrophotometric determination of phytic acid with phytase from Aspergillus ficuum

A method to determine phytic acid in the range 3–60 μM based on the spectrophotometric determination of inorganic phosphate with vanadate and molybdate, after liberation by enzymatic hydrolysis of phytic acid with phytase from Aspergillus ficuum at pH 2.5 and 37 °C is reported. The method has been applied successfully to determine phytic acid in wheat flour and in a pharmaceutical product.     

Myoglobin in polyacrylamide hydrogel films: direct electrochemistry and electrochemical catalysis

Electrochemical behavior of myoglobin (Mb) incorporated in polyacrylamide (PAM) hydrogel films cast on pyrolytic graphite (PG) electrodes were investigated. Mb–PAM film electrodes showed a pair of well-defined and nearly reversible cyclic voltammetric peaks for Mb Fe(III)/Fe(II) redox couple at about −0.27 (vs. SCE) in pH 5.5 buffers. The electron exchange of Mb with PG electrodes was greatly enhanced in PAM films. The apparent heterogeneous electron transfer rate constant (k_s) and formal potential (E°′) were estimated by fitting the data of square wave voltammetry (SWV) with non-linear regression analysis. The formal potential of Mb–PAM films shifted linearly with pH with a slope of −0.52 V, showing the electron transfer was accompanied by a single-proton transportation. Positions of Soret absorbance band of Mb–PAM films suggest that Mb maintains its secondary structure similar to its native state in the films in the medium pH range. Oxygen, trichloroacetic acid (TCA) and nitrite were catalytically reduced by Mb–PAM film electrodes with significant lowering of overpotential. Potential application of Mb–PAM films as biosensors to monitor some substrates was proposed.     

Capillary electrochromatographic separation of metal ion species with on-line detection by inductively coupled plasma mass spectrometry

A bonded phase capillary column containing macrocyclic polyamine, [28]ane-N₆O₂ functional groups was used for the electrophoretic separation of arsenic, chromium and selenium species. A simple device interfacing this capillary electrochromatography (CEC) systems to an inductively coupled plasma mass spectrometer (ICPMS) is described. The dimension of the capillary column was 160 cm×100 μm i.d. To accommodate this electrophoretic separation, an auxiliary capillary was used with nitric acid (0.05 M) as makeup liquid. With the electrokinetic method at –20 kV, 20 s and a nebulizer gas flow rate of 1 l min⁻¹, the sample injected was analyzed with an applied potential of −20 kV. The background electrolyte buffer for the separation of CrO₄²⁻–Cr³⁺ was phosphate (20 mM, pH 6.5). That for HAsO₄²⁻–Ph₄As⁺ was pyromellitate (20 mM, pH 6.0) and for SeO₄²⁻–SeO₃²⁻ was acetate (20 mM, pH 6.0). The role of the buffer’s anion was also discussed. The separation efficiency of the bonded phase was compared with the bare fused silica. Concentration detection limits for these metal ions were in the low ppb range. In addition, the matrix effect of the established system with the bonded phase was found smaller than that with the bare fused silica.     

Molecularly Imprinted Polymer Film Grafted from Porous Silica for Selective Recognition of Testosterone

Abstract

A type of testosterone‐imprinted polymer film grafted from porous silica was prepared by covalently binding azo‐initiators and then photo‐grafting. Elemental analysis and infrared (IR) spectroscopy attested the polymer formation. The material could be polymerized within 10–60 min with reproducible grafting kinetics, controllable film thickness, and obviously specific recognition ability to testosterone with the imprinting factor of 1.52. Due to its uniform size, spherical shape, controllable film thickness, and accessible sites near or at the surface, this polymer could serve as a sensing element, solid‐phase extraction material, or chromatographic stationary phase to selectively recognize or separate testosterone.     

On-line preconcentration of some rare earth elements in water samples using C18-cartridge modified with l-(2-pyridylazo) 2-naphtol (PAN) prior to simultaneous determination by inductively coupled plasma optical emission spectrometry (ICP–OES)

The on-line column preconcentration technique with inductively coupled plasma optical emission spectroscopy (ICP–OES) has been developed using a cartridge filled with octadecyl silica modified by l-(2-pyridylazo) 2-naphtol (PAN). The aim of this method was to determine some rare earth elements (REEs) (Ce, Dy, La, Sm, and Y) and uranium in water samples. Sample solutions were passed through the C₁₈-modified column. The adsorbed cations were subsequently eluted from the column and transferred into the plasma with nitric acid solution for simultaneous determination of them. Sample pH, amount of PAN as a complexing agent, sampling and eluting flowrates and concentration of the eluent were optimized. Detection limits based on three times of standard deviations of blank by 10 replicates were in the range of 11 ng l⁻¹ for Dy to 69 ng l⁻¹ for U. Sample throughput was 10 samples h⁻¹. The proposed method was applied to determine REEs in natural water samples. Recoveries of the REEs from natural water samples were between 95 and 106% with percent relative standard deviation (%R.S.D.) of 1.0–7.9%.     

Direct surface force measurements of polyelectrolyte multilayer films containing nanocrystalline cellulose

Polyelectrolyte multilayer films containing nanocrystalline cellulose (NCC) and poly(allylamine hydrochloride) (PAH) make up a new class of nanostructured composite with applications ranging from coatings to biomedical devices. Moreover, these materials are amenable to surface force studies using colloid-probe atomic force microscopy (CP-AFM). For electrostatically assembled films with either NCC or PAH as the outermost layer, surface morphology was investigated by AFM and wettability was examined by contact angle measurements. By varying the surrounding ionic strength and pH, the relative contributions from electrostatic, van der Waals, steric, and polymer bridging interactions were evaluated. The ionic cross-linking in these films rendered them stable under all solution conditions studied although swelling at low pH and high ionic strength was inferred. The underlying polymer layer in the multilayered film was found to dictate the dominant surface forces when polymer migration and chain extension were facilitated. The precontact normal forces between a silica probe and an NCC-capped multilayer film were monotonically repulsive at pH values where the material surfaces were similarly and fully charged. In contrast, at pH 3.5, the anionic surfaces were weakly charged but the underlying layer of cationic PAH was fully charged and attractive forces dominated due to polymer bridging from extended PAH chains. The interaction with an anionic carboxylic acid probe showed similar behavior to the silica probe; however, for a cationic amine probe with an anionic NCC-capped film, electrostatic double-layer attraction at low pH, and electrostatic double-layer repulsion at high pH, were observed. Finally, the effect of the capping layer was studied with an anionic probe, which indicated that NCC-capped films exhibited purely repulsive forces which were larger in magnitude than the combination of electrostatic double-layer attraction and steric repulsion, measured for PAH-capped films. Wherever possible, DLVO theory was used to fit the measured surface forces and apparent surface potentials and surface charge densities were calculated.     

Inverse opal photonic crystal of chalcogenide glass by solution processing

Chalcogenide opal and inverse opal photonic crystals were successfully fabricated by low-cost and low-temperature solution-based process, which is well developed in polymer films processing. Highly ordered silica colloidal crystal films were successfully infilled with nano-colloidal solution of the high refractive index As(30)S(70) chalcogenide glass by using spin-coating method. The silica/As-S opal film was etched in HF acid to dissolve the silica opal template and fabricate the inverse opal As-S photonic crystal. Both, the infilled silica/As-S opal film (Δn ~ 0.84 near λ=770 nm) and the inverse opal As-S photonic structure (Δn ~ 1.26 near λ=660 nm) had significantly enhanced reflectivity values and wider photonic bandgaps in comparison with the silica opal film template (Δn ~ 0.434 near λ=600 nm). The key aspects of opal film preparation by spin-coating of nano-colloidal chalcogenide glass solution are discussed. The solution fabricated "inorganic polymer" opal and the inverse opal structures exceed photonic properties of silica or any organic polymer opal film. The fabricated photonic structures are proposed for designing novel flexible colloidal crystal laser devices, photonic waveguides and chemical sensors.     

8-Hydroxyquinoline anchored to silica gel via new moderate size linker: synthesis and applications as a metal ion collector for their flame atomic absorption spectrometric determination

The silica gel modified with (3-aminopropyl-triethoxysilane) was reacted with 5-formyl-8-hydroxyquinoline (FHOQ_x) to anchor 8-quinolinol ligand on the silica gel. It was characterised with cross polarisation magic angle spinning (CPMAS) NMR and diffuse reflectance infrared Fourier transformation (DRIFT) spectroscopy and used for the preconcentration of Cu(II), Pb(II), Ni(II), Fe(III), Cd(II), Zn(II) and Co(II) prior to their determination by flame atomic absorption spectrometry. The surface area of the modified silica gel has been found to be 227 m² g⁻¹ and the two pKa values as 3.8 and 8.0. The optimum pH ranges for quantitative sorption are 4.0–7.0, 4.5–7.0, 3.0–6.0, 5.0–8.0, 5.0–8.0, 5.0–8.0 and 4.0–7.0 for Cu, Pb, Fe, Zn, Co, Ni and Cd, respectively. All the metals can be desorbed with 2.5 mol l⁻¹ HCl or HNO₃. The sorption capacity for these metal ions is in range of 92–448.0 μmol g⁻¹ and follows the order Cd3, NaCl, NaBr, Na₂SO₄ and Na₃PO₄, glycine, sodium citrate, EDTA, humic acid and cations Ca(II), Mg(II), Mn(II) and Cr(III) in the sorption of all the seven metal ions are reported. The preconcentration factors are 150, 250, 200, 300, 250, 300 and 200 for Cd, Co, Zn, Cu, Pb, Fe and Ni, respectively and t_1/2 values <1 min except for Ni. The 95% extraction by batch method takes ≤25 min. The simultaneous enrichment and determination of all the metals are possible if the total load of the metal ions is less than sorption capacity. In river water samples all these metal ions were enriched with the present ligand anchored silica gel and determined with flame atomic absorption spectrometer (R.S.D.≤6.4%). Cobalt contents of pharmaceutical samples (vitamin tablet) were preconcentrated with the present chelating silica gel and estimated by flame AAS, with R.S.D.1.4%. The results are in the good agreement with the certified value, 1.99 μg g⁻¹ of the tablets. Iron and copper in certified reference materials (synthetic) SLRS-4 and SLEW-3 have been enriched with the modified silica gel and estimated with R.S.D.<5%.     

Drainage and critical thickness of foam films from aqueous solutions of mixed nonionic surfactants

The thinning and the critical thickness (of rupture or “black spots” formation) of foam films from aqueous solutions of mixed nonionic surfactants are studied under varied experimental conditions, as a function of film radius (0.05–0.15 mm), surfactant concentration (0.01–1.0 CMC) and ionic strength (0.001–0.1 M NaCl). The experimental values of the drainage coefficient (), determined from the film thickness versus time dependences, were used to calculate the theoretical values of the film critical thickness.

The real velocity of film thinning is a major factor in the process of reaching the state of kinetic instability when approaching the critical thickness (Scheludko's criterion). The classical equation used to describe the film thinning rate, proposed and named by Scheludko (1955) “Reynolds Law”, is applicable for small film radii (r < 0.05 mm). At larger radii the velocity of thinning follows the equation of Manev et al. [E.D. Manev, R. Tsekov, B. Radoev, J. Colloid Interf. Sci. 18 (1997) 769], which takes into account the effect of the film thickness local non-homogeneity.

The studied stabilizing surfactants include n-dodecyl-β-d-maltoside (β-C12G2) and hexaethyleneglycol monododecyl ether (C12E6). Along with confirming the dependences following from the theories of the critical thickness [B. Radoev, A. Scheludko, E.D. Manev, J. Colloid Interf. Sci. 95 (1983) 254] and film thinning [E.D. Manev, R. Tsekov, B. Radoev, J. Colloid Interf. Sci. 18 (1997) 769], the results of the present investigation established also certain deviations for films stabilized with mixed surfactants (β-C12G2 + C12E6). The effectiveness of the empirical equation, employing the drainage coefficient () to describe the film thinning, is emphatically proven here.     

Dose response and post-irradiation characteristics of the Sunna 535-nm photo-fluorescent film dosimeter

Results of characterization studies on one of the first versions of the Sunna photo-fluorescent dosimeter™ have previously been reported, and the performance of the red fluorescence component described. This present paper describes dose response and post-irradiation characteristics of the green fluorescence component from the same dosimeter film (Sunna Model γ), which is manufactured using the injection molding technique. This production method may supply batch sizes on the order of 1 million dosimeter film elements while maintaining a signal precision (1σ) on the order of ±1% without the need to correct for variability of film thickness. The dosimeter is a 1 cm×3 cm polymeric film of 0.5-mm thickness that emits green fluorescence at intensities increasing almost linearly with dose. The data presented include dose response, post-irradiation growth, heat treatment, dosimeter aging, dose rate dependence, energy dependence, dose fractionation, variation of response within a batch, and the stability of the fluorimeter response. The results indicate that, as a routine dosimeter, the green signal provides a broad range of response at food irradiation (0.3–5 kGy), medical sterilization (5–40 kGy), and polymer cross-linking (40–250 kGy) dose levels.     

循环伏安法制聚(1,5-萘二胺)膜及其对紫外可见光吸收的研究

利用循环伏安法合成了1,5-萘二胺(1,5DAN)聚合物膜.从反应的介质、膜的厚度以及掺杂酸的种类等方面,讨论了制备电活性聚1,5-萘二胺(P1,5DAN)膜的影响,结果发现,在酸性水溶液中,初始的电活性比较高,但是,随着循环的继续,聚合物膜的电量损耗比较大,而在乙腈溶液中电量损耗较小;同时还发现,P1,5DAN电活性膜的厚度并不随总电量的增加而增厚;活性聚合物膜是受扩散控制,扩散系数(D)与酸根离子有关.最后,结合电化学,讨论了不同掺杂状态下的紫外可见吸收光谱(UV-Vis),并用FT-IR对所合成的聚合物作了结构表征.