Selection of a piezoelectric sensor array for detecting volatile organic substances in water

Sensitive coatings for piezoelectric sensors used to assess the presence of anthropogenic volatile organic substances in the equilibrium gas phase over natural water have been selected using an array of measuring elements, and the data have been processed using principal component analysis. Groups of piezoelectric sensors with similar characteristics for substance identification have been determined based on the correlation between piezoelectric sensor responses when vapors of organic substances were detected. The stepby-step optimization of the piezoelectric sensor array has been carried out in order to identify the greatest number of organic compounds (vapors) in the sample. Volatile organic compounds can be identified in their aqueous solutions and natural water using the optimized piezoelectric sensor array.     

Real-time monitoring of formaldehyde-induced DNA-lysozyme cross-linking with piezoelectric quartz crystal impedance analysis

A novel method for monitoring, in real time, the formaldehyde (FA)-induced DNA-protein cross-linking process with the piezoelectric quartz crystal impedance (PQCI) technique is proposed. The method was used to monitor FA-induced DNA-lysozyme cross-link formation. Lysozyme was directly immobilized on the silver electrode surface of a piezoelectric quartz crystal by adsorption. The lysozyme-coated piezoelectric sensor was in contact with FA and DNA solutions. The time courses of the resonant frequency and equivalent circuit parameters of the sensor during the cross-linking were simultaneously obtained and are discussed in detail. On the basis of the feature of the multi-dimensional information provided by the PQCI technique, it was concluded that the observed frequency decrease could be mainly ascribed to the mass increase resulting from the cross-linking. According to the frequency decrease with time, the kinetics of the cross-linking process were quantitatively studied. A piezoelectric response model for the cross-linking was theoretically derived. Fitting the experimental data to the model, the kinetic parameters, such as the binding and dissociation rate constants (k(1) and k(-1)) and the cross-linking equilibrium constant (Ka), were determined. At 37 degrees C, the k(1), k(-1) and Ka values obtained were 7.0 (+/-0.1) x 10(-5) (microg ml(-1))(-1) s(-1), 6.6 (+/-0.1) x 10(-3) s(-1) and 1.06 (+/-0.02) x 10(-2) (microg ml(-1))(-1), respectively.     

Monitoring of mutagenic process with piezoelectric quartz crystal impedance analysis

A novel method for monitoring of mutagenic process of dimethyl sulfate to Salmonella typhimurium strain (TA100) was proposed by using piezoelectric quartz crystal impedance (PQCI) analysis technique. The time courses of responses piezoelectric impedance parameters for a quartz crystal in a culture system were simultaneously obtained and discussed. It was found that the motional resistance variation (DeltaR(m)) increases and frequency shift (Deltaf) of PQC sensor decreases correspondingly during the mutagenic process of the bacteria. These parameters could reflect the variations of viscosity and density of culture system. By fitting DeltaR(m) versus time curves toward Gompertz bacterial growth model, we obtained and discussed the bacterial growth parameters for both normal growth and mutagenic process. The experiments showed that the proposed method could provide real time and multidimensional impedance information to the monitoring of mutagenic process.     

Quartz crystal microbalance determination of vapors of volatile organic compounds on carbon nanotubes under batch conditions

Specific features of the sorption of vapors of monoatomic aliphatic alcohols and aromatic compounds on coatings formed from carbon nanotubes of various genesis studied by the method of piezoelectric micro weighing are considered. The morphology of the coatings is considered in dependence on the conditions of synthesis and aftertreatment of carbon nanotubes. A new method of the processing of signals from an array piezoelectric sensors is proposed; it allows an increase in the selectivity of the determination of volatile organic compounds in an equilibrium gas phase by 2–2.5 times. The advantages of the application of carbon nanotubes as sorption coatings in comparison to the standard polymeric sorbents for piezoelectric micro weighing are demonstrated: the detection limit decreases by 4–15 times and the duration of measurement by 5–55 times.     

Estimation of kinetics parameters for the adsorption of human serum albumin onto hydroxyapatite-modified silver electrodes by piezoelectric quartz crystal impedance analysis.

The adsorption of human serum albumin onto hydroxyapatite-modified silver electrodes has been in situ investigated by utilizing the piezoelectric quartz crystal impedance technique. The changes of equivalent circuit parameters were used to interpret the adsorption process. A kinetic model of two consecutive steps was derived to describe the process and compared with a first-order kinetic model by using residual analysis. The experimental data of frequency shift fitted to the model and kinetics parameters, k1, k2, psi1, psi2 and qr, were obtained. All fitted results were in reasonable agreement with the corresponding experimental results. Two adsorption constants (7.19 kJ mol(-1) and 22.89 kJ mol(-1)) were calculated according to the Arrhenius formula.     

压电晶体传感器阵列测定装置及数据采集系统

研究了一种利用微机控制测量和采集压电晶体传感器阵列振荡频率的智能型仪器。介绍了其硬件及数据采集软件的功能，结构等。     

Application of pattern recognition and piezoelectric sensor array for the detection of organic compounds

Organic vapours were measured by an array of piezoelectric crystal detectors. Quartz crystals were coated by different GC stationary phases. Four coated crystals were placed in an array and pattern recognition was used for identification of the compounds including acetone, benzene, chloroform and pentane. A computer program was developed for the measurement of the frequency changes and data processing. Pattern recognition method using feature extraction was applied for identification of analytes.     

Use of Chelate Complexes of Lead(II) in Low-Temperature Technologies of Ceramic Piezoelectric Materials

Technology is suggested for fabrication of ceramic piezoelectric materials from the lead-containing ferroelectric phase. The technology includes a low-temperature synthesis of ultradispersed lead titanate and zirconate powders and also of phases of solid solutions on their basis and the low-temperature procedure for sintering of ceramic fabricated from ultradispersed powders of ferroelectric phases. As precursors used in the suggested low-temperature synthesis serve lead glycerate and tartrate. It was found that, when interacting (at temperatures of 240–330°C) with hydroxo-peroxo-aqua complexes of titanium and(or) zirconium(IV) in the course of 30–40 min, the precursors form ultradispersed powders of these phases, which are single-phase and contain particles with average size of less than 100 nm. It was shown that using the suggested technology makes it possible not only to reduce the energy expenditure for separate procedures for synthesis of ultradispersed ferroelectric phases and for synthesis of piezoelectric materials, but also to substantially diminish the discharge of lead(II) compounds into the atmosphere of industrial premises. It was also shown that the technology enables fabrication of piezoelectric materials with prescribed values of electrical parameters.

     

Piezoelectric detection of ion pairs between sulphonate and catecholamines for flow injection analysis of pharmaceutical preparations

Fundamentals of ion-pair flow injection with piezoelectric detection were investigated experimentally and theoretically for the adsorption of dodecyl phenylsulfonate and interfacial ion-pair formation with epinephrine and l-dopa on silver electrode of quartz crystal microbalance. The influences of sulfonate concentration and operating parameters on the frequency response were demonstrated and provided the possibility for the discriminating determination of mixtures. The selected system of ion-pair flow injection with piezoelectric detection was applied to the determination of epinephrine and l-dopa. Calibration curves were linear in ranges 4.00-850 and 3.50-730 mug ml(-1), with detection limits of 1.22 and 1.05 mug ml(-1) and sampling frequencies of 120 samples h(-1), for epinephrine and l-dopa, respectively. The method has been satisfactorily applied to the determination of catecholamines in pharmaceutical preparations.     

Qualitative analysis of the chemical constituents in Hedyotis diffusa by HPLC-TOF-MS

A high performance liquid chromatography-time-of-flight-mass spectrometry (HPLC-TOF-MS) method was developed for analysing the chemical constituents in Hedyotis diffusa, which is widely used as a traditional Chinese medicine (TCM) in the field of cancer treatment. The compounds were identified either by comparing the retention time and mass spectrometry data with those of reference compounds or by analysing mass spectrometry data and retrieving reference literature. Among the detected chromatographic peaks, nine components were unambiguously identified, most of which were iridoids. This study is expected to provide an effective and reliable pattern for comprehensive and systematic characterisation of the complex TCM systems.     

Detection of toluene diisocyanate in air with a coated piezoelectric crystal: Part 2. Development of an Instrumental Method For Personal Monitoring

Gases in the atmosphere are monitored with chemically-coated quartz piezoelectric crystals; the method is demonstrated in the use of polyethylene glycol for toluene diisocyanate determination. A microprocessor is used to control the gas sample flow through the detector head as well as the data acquisition. A computer-based procedure for data treatment permits signal integration and background drift correction, resulting in a theoretical detection limit of about 0.006 ppm. The design of a basic portable instrument for piezoelectric crystal monitoring of toxic gas is described with a view to future modification and microprocessor control.     

Impedance analysis of an electrode-separated piezoelectric sensor as a surface-monitoring technique for gelatin adsorption on quartz surface

The early events pertaining to gelatin adsorption and desorption onto quartz surfaces were studied, employing an electrode-separated piezoelectric sensor (ESPS). The adsorption of gelatin on a quartz crystal surface corresponds to a mass increase, which can be monitored in real time by the changes in the impedance parameters of the ESPS. It was shown that the adsorption of gelatin on a quartz surface is partly irreversible with respect to the dilution of the bulk phase. The observed adsorption kinetics is compatible with a mechanism that involves adsorption, desorption, and transformation from a reversible adsorption state to irreversible one. A progressive approach method was established to simulate the adsorption process. The adsorption densities and kinetic parameters in the early adsorption process were obtained from the responses of the ESPS in the adsorption process. The influence of pH and ionic strength was tested. A comparison with the Langmuir adsorption model was made.     

Thermal analysis of novel selenocarbamates

Trace element selenium and its metabolites have received a great deal of attention with regard to the development of new therapies for both cancer prevention and treatment. Following this approach, our research group has synthesized a series of novel selenocarbamates derivatives. We present thermal analysis of the novel compounds, performed with differential scanning calorimetry and thermogravimetric analysis. Relationship is found among thermal analytical data and structure of the different series of compounds. These data allow establishing criteria for the selection of substituents that improve the stability. The most thermally unstable compounds are those with higher cytotoxic activities, suggesting that the release of methylselenol could be implicated in the biological activity.     

Conformational analysis of some ortho-hydroxyazoic dyes by the PCILO method

The quantum mechanical MO method PCILO is used to perform a detailed conformational analysis of ortho-hydroxyazobenzene and 1-phenyl azo 2-napthol. Several energy minima are obtained for each compound, after a simultaneous optimization of the main geometric parameters. Comparison is made with the corresponding para compounds. The calculated results are discussed in relation to the available experimental data.     

Composite multi-parameter ranking of real and virtual compounds for design of MC4R agonists: Renaissance of the Free-Wilson methodology

Drug design is a multi-parameter task present in the analysis of experimental data for synthesized compounds and in the prediction of new compounds with desired properties. This article describes the implementation of a binned scoring and composite ranking scheme for 11 experimental parameters that were identified as key drivers in the MC4R project. The composite ranking scheme was implemented in an AstraZeneca tool for analysis of project data, thereby providing an immediate re-ranking as new experimental data was added. The automated ranking also highlighted compounds overlooked by the project team. The successful implementation of a composite ranking on experimental data led to the development of an equivalent virtual score, which was based on Free-Wilson models of the parameters from the experimental ranking. The individual Free-Wilson models showed good to high predictive power with a correlation coefficient between 0.45 and 0.97 based on the external test set. The virtual ranking adds value to the selection of compounds for synthesis but error propagation must be controlled. The experimental ranking approach adds significant value, is parameter independent and can be tuned and applied to any drug discovery project.     

Multivariate analysis of chromatographic retention data and lipophilicity of phenylacetamide derivatives

One of the most important physicochemical parameters of a molecule that determines its bioactivity is its lipophilicity. Cluster analysis (CA), principal component analysis (PCA), and sum of ranking differences (SRD) were used to compare the lipophilic parameters of twenty phenylacetamide derivatives, obtained experimentally as chromatographic retention data in the presence of different solvents and calculated by different mathematical methods. All the applied methods of multivariate analysis gave approximately similar grouping of the studied lipophilic parameters. In the attempt to group the investigated compounds in respect of their lipophilicity, the obtained results appeared to be dependent on the applied chemometric method. The CA and PCA, grouped the compounds on the basis of the nature of the substituents R₁ and R₂, indicating that they determine to a great extent the lipophilicity of the investigated molecules. Unlike them, the SRD method could not be used to group the studied compounds on the basis of their lipophilic character.     

Simplified method of the quantum chemical analysis for determination of thermodynamic parameters of 2D cluster formation of amphiphilic compounds at the air/water interface

A simplified method is proposed to estimate the thermodynamic parameters of clusterization at the air/water interface for various classes of amphiphilic compounds with a single alkyl chain. The method is based on the calculation of thermodynamic characteristics only for one of the homologous series of dimers (n=6-16) governing the formation of infinite clusters. The method is used to calculate the thermodynamic parameters of clusterization for alcohols, thioalcohols, carboxylic acids and amines, and the dependencies of the Gibbs energy of clusterization on the alkyl chain length are evaluated. It is shown that the alkyl chain length, at which the spontaneous clusterization begins, as calculated using the proposed simplified method, is in fact the same as that calculated using the additive scheme developed earlier. The simplified method proposed was verified using alkylnitriles as example. In contrast to alcohols, thioalcohols and amines, infinite 'rhombic' clusters are formed rather than 'rectangular' clusters for this class of compounds. Spontaneous clusterization of nitriles is shown to start for alkyl chains containing 18-19 carbon atoms. This value agrees with that obtained from experimental data with 17-18 carbon atoms. The proposed simplified method introduces an exact and suitable tool for the estimation of thermodynamic parameters of the clusterization of amphiphilic compounds.     

Multivariate data analysis approach to understand magnetic properties of perovskite manganese oxides

Here we apply statistical multivariate data analysis techniques to obtain some insights into the complex structure-property relations in antiferromagnetic (AFM) and ferromagnetic (FM) manganese perovskite systems, AMnO₃. The 131 samples included in the present analyses are described by 21 crystal-structure or crystal-chemical (CS/CC) parameters. Principal component analysis (PCA), carried out separately for the AFM and FM compounds, is used to model and evaluate the various relationships among the magnetic properties and the various CS/CC parameters. Moreover, for the AFM compounds, PLS (partial least squares projections to latent structures) analysis is performed so as to predict the magnitude of the Néel temperature on the bases of the CS/CC parameters. Finally, so-called PLS-DA (PLS discriminant analysis) method is employed to find out the most influential/characteristic CS/CC parameters that differentiate the two classes of compounds from each other.     

Composition and analysis of liquid smoke flavouring primary products

Smoke flavourings are produced on a large scale and have been applied to a variety of food products for more than 30 years. The use of them has many advantages compared to traditional smoking techniques. Among others, the amount of (known) toxic compounds deriving from combustion processes can be more easily controlled in smoke flavourings. In order to ensure safe products, a new European Regulation requests data on the composition and lays down, in particular, the maximum permitted concentrations for selected polycyclic aromatic hydrocarbons (PAHs). This review compiles results published on the chemical composition of liquid smoke flavouring primary products, partly in relation to production process parameters, and the analytical methods involved. The methods cover chromatographic techniques for analysis of specific compounds including extraction methods and clean-up procedures. Analysis of sensorial and bulk parameters such as acidity and total phenolic compounds are described as well as they are used as standard methods for analysis of liquid smoke flavourings. A special section is devoted to discussing the analysis of PAHs.     

Application of a quartz crystal nanobalance and principal component analysis for the detection and determination of histidine

The aim of the present investigation was to develop a biosensor based on a quartz crystal nanobalance (QCN) for the detection of histidine (His). A thin layer of nickel was electrochemically deposited over the gold crystal electrode and exposed to H₂O₂ to form nickel oxide. The composite electrode was then used to determine His. The frequency shifts were linear with respect to the concentration of His in solution. His can be measured in the range of 100–2000 mg L⁻¹. A lower limit of detection of 48 mg L⁻¹ and a sensitivity factor of 0.0307 Hz/mg L⁻¹ was obtained. Some possible interferences were checked for, and the performance of the sensor was found to be unaffected by any interference except for those from arginine, cysteine and NaH₂PO₄. Principal component analysis (PCA) was used to process the frequency response data of the single piezoelectric crystal at various times, considering the different adsorption–desorption dynamics of His and the interfering compounds. Over 85% of the variance in the data was explained by two principal components. A score plot of the data for the first two PCs showed that the modified QCN yields favorable identification and quantification performances for His and the interfering compounds.