Determination of molecular line parameters for acrolein (C(3)H(4)O) using infrared tunable diode laser absorption spectroscopy

Acrolein (C(3)H(4)O) molecular line parameters, including infrared (IR) absorption positions, strengths, and nitrogen broadened half-widths, must be determined since they are not included in the high resolution transmission (HITRAN) molecular absorption database of spectral lines. These parameters are required for developing a quantitative analytical method for measuring acrolein in a single puff of cigarette smoke using tunable diode laser absorption spectroscopy (TDLAS). The task is complex since acrolein has many highly overlapping infrared absorption lines in the room temperature spectrum and the cigarette smoke matrix contains thousands of compounds. This work describes the procedure for estimating the molecular line parameters for these overlapping absorption lines in the wavenumber range (958.7-958.9 cm(-1)) using quantitative reference spectra taken with the infrared lead-salt TDLAS instrument at different pressures and concentrations. The nitrogen broadened half-width for acrolein is 0.0937 cm(-1)atm(-1) and to our knowledge, is the first time it has been reported in the literature.     

Measurement of acrolein and 1,3-butadiene in a single puff of cigarette smoke using lead-salt tunable diode laser infrared spectroscopy

Acrolein and 1,3-butadiene in cigarette smoke generally are measured using two separate analytical methods, a carbonyl derivative HPLC method for acrolein and a volatile organic compound (VOC) GC/MS method for 1,3-butadiene. However, a single analytical method having improved sensitivity and real-time per puff measurement will offer more specific information for evaluating experimental carbon filtered cigarettes designed to reduce the smoke deliveries of these constituents. This paper describes an infrared technique using two lead-salt tunable diode lasers (TDLs) operating with liquid nitrogen cooling with emissions at 958.8 cm(-1) and 891.0 cm(-1) respectively for the simultaneous measurement of acrolein and 1,3-butadiene, respectively, in each puff of mainstream cigarette smoke in real time. The dual TDL system uses a 3.1l volume, 100 m astigmatic multiple pass absorption gas cell. Quantitation is based on a spectral fit that uses previously determined infrared molecular line parameters generated in our laboratory, including line positions, line strengths and nitrogen-broadened half-widths for these species. Since acrolein and ethylene absorption lines overlap and 1,3-butadiene, ethylene and propylene absorption lines overlap, the per puff deliveries of ethylene and propylene were determined since their overlapping absorption lines must be taken into account by the spectral fit. The acrolein and 1,3-butadiene total cigarette deliveries for the 1R5F Kentucky Reference cigarette were in agreement with the HPLC and GC/MS methods, respectively. The limit of detection (LOD) for 1,3-butadiene and acrolein was 4 ng/puff and 24 ng/puff, respectively, which is more than adequate to determine at which puff they break through the carbon filter. The retention and breakthrough behavior for the two primary smoke constituents depend on the cigarette design and characteristics of the carbon filter being evaluated.     

Determination of molecular line parameters for acrolein (C3H4O) using infrared tunable diode laser absorption spectroscopy

Acrolein (C₃H₄O) molecular line parameters, including infrared (IR) absorption positions, strengths, and nitrogen broadened half-widths, must be determined since they are not included in the high resolution transmission (HITRAN) molecular absorption database of spectral lines. These parameters are required for developing a quantitative analytical method for measuring acrolein in a single puff of cigarette smoke using tunable diode laser absorption spectroscopy (TDLAS). The task is complex since acrolein has many highly overlapping infrared absorption lines in the room temperature spectrum and the cigarette smoke matrix contains thousands of compounds. This work describes the procedure for estimating the molecular line parameters for these overlapping absorption lines in the wavenumber range (958.7–958.9 cm⁻¹) using quantitative reference spectra taken with the infrared lead-salt TDLAS instrument at different pressures and concentrations. The nitrogen broadened half-width for acrolein is 0.0937 cm⁻¹ atm⁻¹ and to our knowledge, is the first time it has been reported in the literature.     

Reactions of C2H with 1- and 2-butynes: an ab initio/RRKM study of the reaction mechanism and product branching ratios

Ab initio CCSD(T)/cc-pVTZ(CBS)//B3LYP/6-311G** calculations of the C(6)H(7) potential energy surface are combined with RRKM calculations of reaction rate constants and product branching ratios to investigate the mechanism and product distribution in the C(2)H + 1-butyne/2-butyne reactions. 2-Ethynyl-1,3-butadiene (C(6)H(6)) + H and ethynylallene (C(5)H(4)) + CH(3) are predicted to be the major products of the C(2)H + 1-butyne reaction. The reaction is initiated by barrierless ethynyl additions to the acetylenic C atoms in 1-butyne and the product branching ratios depend on collision energy and the direction of the initial C(2)H attack. The 2-ethynyl-1,3-butadiene + H products are favored by the central C(2)H addition to 1-butyne, whereas ethynylallene + CH(3) are preferred for the terminal C(2)H addition. A relatively minor product favored at higher collision energies is diacetylene + C(2)H(5). Three other acyclic C(6)H(6) isomers, including 1,3-hexadiene-5-yne, 3,4-hexadiene-1-yne, and 1,3-hexadiyne, can be formed as less important products, but the production of the cyclic C(6)H(6) species, fulvene, and dimethylenecyclobut-1-ene (DMCB), is predicted to be negligible. The qualitative disagreement with the recently measured experimental product distribution of C(6)H(6) isomers is attributed to a possible role of the secondary 2-ethynyl-1,3-butadiene + H reaction, which may generate fulvene as a significant product. Also, the photoionization energy curve assigned to DMCB in experiment may originate from vibrationally excited 2-ethynyl-1,3-butadiene molecules. For the C(2)H + 2-butyne reaction, the calculations predict the C(5)H(4) isomer methyldiacetylene + CH(3) to be the dominant product, whereas very minor products include the C(6)H(6) isomers 1,1-ethynylmethylallene and 2-ethynyl-1,3-butadiene.     

Intrinsic information content of NMR dipolar couplings: a conformational investigation of 1,3-butadiene in a nematic phase.

The conformational equilibrium of 1,3-butadiene in a condensed fluid phase is investigated by liquid-crystal NMR spectroscopy. The full set of D(HH) and D(CH) dipolar couplings is determined from the analysis of the (1)H spectra of the three 1,3-butadiene most-abundant isotopomers (i.e. the all (12)C and the two single-labeled (13)C isotopomers) for a total of 21 independent dipolar couplings. A very good starting set of spectral parameters for the analysis of the (1)H spectrum is determined in a semiautomated way by the analysis of the (N-1) (specifically, N=6, the number of 1/2 spin nuclei in the spin system) quantum refocused (5QR), and not (5Q), spectra. As an alternative approach, a Monte Carlo (MC) numerical simulation, capable of predicting the solute ordering, is tested to simulate the 5QR spectrum. The set of D(ij) couplings is very good, proving that the MC method can represent a novel, valid alternative to the existing spectral simplification procedures. The experimentally determined dipolar-coupling data set is fully compatible with the 1,3-butadiene conformational distribution reported in the literature for isolated molecules, indicating the presence of about 99 % of s-trans conformer. With regards to the remaining 1 %, in spite of the direct and very strong dependence of the observables on the molecular structure, it was not possible to discriminate between the planar s-cis and s-gauche forms, both of which produce a very good fit of the dipolar couplings. Vibrational corrections, up to the anharmonic term, were applied; the calculated geometrical parameters are in good- although not exact-agreement with those reported in the literature from experimental and theoretical investigations. This result can be considered as supporting the methodology used for obtaining the structure and conformational distribution of a flexible molecule in a liquid phase.     

Photochemical and discharge-driven pathways to aromatic products from 1,3-butadiene

A detailed study of the photochemical and discharge-driven pathways taken by gas-phase 1,3-butadiene has been carried out. Photolysis or discharge excitation was initiated inside a short reaction tube attached to the outlet of a pulsed valve. Bath gas temperatures near 100 K were achieved in the reaction tube by the constrained expansion of the gas mixture into the tube, simulating temperatures of relevance in Titan's atmosphere. Photolysis of 1,3-butadiene was initiated at 218 nm with a laser pulse that counter-propagated the reaction tube. Discharge excitation was carried out using discharge electrodes imbedded in the reaction tube walls, enabling the study of the photochemical and discharge products under similar conditions. Products were detected using either single-photon VUV photoionization (118 nm = 10.5 eV) or resonant two-photon ionization (R(2)PI) spectroscopy in a time-of-flight mass spectrometer. Emphasis was placed on characterization of the aromatic products formed, since these may be of particular relevance to Titan's atmosphere, where benzene has been positively identified and 1,3-butadiene is projected as the principle pathway to its formation. Consistent with previous studies of the photodissociation of 1,3-butadiene, C(3)H(3) + CH(3) is the dominant primary product formed. Under the temperature-pressure conditions present in the reaction tube (T approximately 75-100 K, P = 50 mbar), C(6)H(6) is the dominant secondary photochemical product formed. A 1:1 C(4)H(6):C(4)D(6) mixture was used to prove that the C(6)H(6) product was formed by recombination of two C(3)H(3) radicals; however, a careful search for benzene revealed none, indicating that less than 1% of the C(6)H(6) formed in the reaction tube is benzene. This is consistent with expectations for these temperatures and pressures based on previous modeling of propargyl recombination. Two aromatic products were observed from the photochemistry: ethylbenzene and 3-phenylpropyne. Plausible pathways leading to these products are proposed. In the discharge, C(3)H(3) + CH(3) are also identified as significant primary neutral products and C(6)H(6) as a dominant higher-mass product. In this case, the C(6)H(6) was identified as benzene via its R2PI spectrum, appearing with intensity about 10 times larger than any other aromatic formed in the discharge. R2PI spectra of a total of about 15 aromatic products were recorded from the 1,3-butadiene discharge, among them toluene; styrene; phenylacetylene; o-, m-, and p-xylene; ethylbenzene; indane; indene; beta-methylstyrene; and naphthalene. Previously unidentified spectra in the m/z 142 and 144 mass channels were positively identified as the 1,3- and 1,4-isomers of phenylcyclopentadiene and the analogous 1-phenylcyclopentene.     

SOLVENT AND TEMPERATURE EFFECTS ON THE EXCITED SINGLET STATE ABSORPTION OF DIPHENYLBUTADIENE

Nanosecond excited state absorption spectra of all-trans-1,4-diphenyl-1,3-butadiene (DPB) and a rigid s-cis DPB analog, 1,4-diphenyl-1,3-cyclopentadiene, were obtained in several hydrocarbon solvents at room temperature and low temperatures. Analysis of the excited state absorption spectra of these two molecules suggests the presence of excited state s-cis rotamers in DPB at room temperature.     

Calculation of anharmonic intensities in vibrational spectra of raman scattering and full interpretation of the vibrational spectrum of <Emphasis Type="Italic">trans</Emphasis>-1,3-butadiene

The anharmonic model of vibrations of polyatomic molecule makes it possible, using the secondorder perturbation theory, to interpret vibrational spectra in detail with resonances taken into account and to calculate the band intensities in spectra for fundamental frequencies, overtones, and combination frequencies. For molecules possessing a center of symmetry (to which trans-1,3-butadiene belongs), many vibration modes have zero intensities of absorption in IR spectra due to the mutual exclusion rule. For meaningful analysis of vibrations of such molecules, measurement of Raman scattering (RS) spectra is necessary, as is developing a theoretical model for calculating the anharmonic intensity. Perturbation theory (PT) in the form of contact transformations (CTs) has proven applicable for calculating the anharmonic intensities in RS spectra. The FORTRAN software program ANCO has been developed, which allows the calculation of vibration frequencies and IR-RS intensities of fundamental vibrations, overtones, and combination frequencies on the basis of second-order PT in form of CTs using the polynomial representation of potential energy, dipole moment and polarizability surfaces. The obtained frequencies and modes of anharmonic vibrations are provided, as well as interpretation of the experimental spectrum of the trans-1,3-butadiene molecule. A procedure for calculating the scale factors of the anharmonic force field is proposed. We also show that within the anharmonic vibration model, these factors are close to unity.     

Mechanistic studies of the pyrolysis of 1,3-butadiene, 1,3-butadiene-1,1,4,4-d4, 1,2-butadiene, and 2-butyne by supersonic jet/photoionization mass spectrometry

The thermal decomposition of 1,3-butadiene, 1,3-butadiene-1,1,4,4-d(4), 1,2-butadiene, and 2-butyne at temperatures up to 1520 K was carried out by flash pyrolysis on a approximately 20 mus time scale. The reaction products were isolated by supersonic expansion and detected by single-photon (lambda = 118 nm) vacuum-ultraviolet time-of-flight mass spectrometry (VUV-TOFMS). Direct detection of CH(3) and C(3)H(3), as well as C(3)H(4), C(4)H(4), and C(4)H(5) products, provides insight into the initial steps involved in the complex pyrolysis of these C(4)H(6) species below T = 1500 K. The similar pyrolysis product distributions for the C(4)H(6) isomers on such a short time scale support the previously proposed mechanism of facile isomerization of these species. Isomerization of 1,3-butadiene to 1,2-butadiene and subsequent C-C bond fission of 1,2-butadiene to produce CH(3) and C(3)H(3) (propargyl) are most likely the primary initial radical production channel in the 1,3-butadiene pyrolysis.     

CO2 laser-induced photolysis of spirohexane: Time resolved observation of vibrationally excited 1,3-butadiene

Vibrationally excited spirohexane (SHX) generated in CO₂ laser irradiation undergoes photolysis producing ethylene, 1,3-butadiene and a C₄ compound as major products. Collisional energy pooling plays a major role in the multiphoton excitation process. Time-resolved formation of 1,3-butadiene is monitored by UV absorption from which the unimolecular rate constant for SHX dissociation is found to be 5.6 × 10⁵ s⁻¹. A red shift of 4O nm observed in the transient UV absorption spectrum has been assigned to nascent 1,3-butadiene, which suggests that vibrationally hot 1,3-butadiene molecules are formed. The effects of laser energy fluence and pressure of SF₆ as a sensitizer on dissociation yield are also investigated.     

Infrared reflection-absorption spectra of C2H4 and C2H6 on Cu: effect of surface roughness

Infrared reflection absorption spectroscopy (IRRAS) of the highly symmetric molecules C2H4 and C2H6 adsorbed as mono- and multilayers onto copper films is studied in relation to the type of metal-film roughness. Spectra of C2H4 show Raman lines on cold-deposited Cu films but not on Cu deposited at room temperature. For C2H6, the IR spectra from both types of metal films are similar; the surface infrared selection rule holds and no Raman bands are observed. The Raman lines that appear in the IR spectra already at low exposures are attributed to species adsorbed at special defect sites, identical to the so-called active sites in surface enhanced Raman scattering (SERS). The IR excitation mechanism by transient electron transfer to the adsorbate pi* state can deliver a discrete vibrational band of a Raman-active vibration only under certain circumstances, for example, for adsorbates at the "SERS-active sites". C2H6 at these sites cannot deliver Raman bands in IRRAS, because it has no pi* state. We also discuss IRRAS measurements on Cu(111) and Cu(110) single crystals, where Raman bands of C2H4 have been observed.     

High resolution spectroscopy of methyltrioxorhenium: towards the observation of parity violation in chiral molecules

Originating from the weak interaction, parity violation in chiral molecules has been considered as a possible origin of biohomochirality. We have proposed the observation of molecular parity violation using the two-photon Ramsey fringes technique on a supersonic beam. As a first step in this direction, a detailed spectroscopic study of methyltrioxorhenium (MTO) has been undertaken. It is an ideal test molecule as the achiral parent molecule of chiral candidates for a parity violation experiment. For the (187)Re MTO isotopologue, a combined analysis of Fourier transform microwave and infrared spectra as well as ultra-high resolution CO(2) laser absorption spectra enabled the assignment of 28 rotational lines and 71 rovibrational lines, some of them with a resolved hyperfine structure. A set of spectroscopic parameters in the ground and first excited state, including hyperfine structure constants, was obtained for the ν(as) antisymmetric Re=O stretching mode of this molecule. This result validates the experimental approach to be followed once a chiral derivative of MTO is synthesized, and shows the benefit of the combination of several spectroscopic techniques in different spectral regions, with different set-ups and resolutions. The first high resolution spectra of jet-cooled MTO, obtained on a set-up being developed for the observation of molecular parity violation, are shown, which constitutes a major step towards the targeted objective.     

Dissociative photoionization of 1,3-butadiene: experimental and theoretical insights

The vacuum-ultraviolet photoionization and dissociative photoionization of 1,3-butadiene in a region ～8.5-17 eV have been investigated with time-of-flight photoionization mass spectrometry using tunable synchrotron radiation. The adiabatic ionization energy of 1,3-butadiene and appearance energies for its fragment ions, C(4)H(5)(+), C(4)H(4)(+), C(4)H(3)(+), C(3)H(3)(+), C(2)H(4)(+), C(2)H(3)(+), and C(2)H(2)(+), are determined to be 9.09, 11.72, 13.11, 15.20, 11.50, 12.44, 15.15, and 15.14 eV, respectively, by measurements of photoionization efficiency spectra. Ab initio molecular orbital calculations have been performed to investigate the reaction mechanism of dissociative photoionization of 1,3-butadiene. On the basis of experimental and theoretical results, seven dissociative photoionization channels are proposed: C(4)H(5)(+) + H, C(4)H(4)(+) + H(2), C(4)H(3)(+) + H(2) + H, C(3)H(3)(+) + CH(3), C(2)H(4)(+) + C(2)H(2), C(2)H(3)(+) + C(2)H(2) + H, and C(2)H(2)(+) + C(2)H(2) + H(2). Channel C(3)H(3)(+) + CH(3) is found to be the dominant one, followed by C(4)H(5)(+) + H and C(2)H(4)(+) + C(2)H(2). The majority of these channels occur via isomerization prior to dissociation. Transition structures and intermediates for those isomerization processes were also determined.     

PAH formation under single collision conditions: reaction of phenyl radical and 1,3-butadiene to form 1,4-dihydronaphthalene

The crossed beam reactions of the phenyl radical (C(6)H(5), X(2)A(1)) with 1,3-butadiene (C(4)H(6), X(1)A(g)) and D6-1,3-butadiene (C(4)D(6), X(1)A(g)) as well as of the D5-phenyl radical (C(6)D(5), X(2)A(1)) with 2,3-D2-1,3-butadiene and 1,1,4,4-D4-1,3-butadiene were carried out under single collision conditions at collision energies of about 55 kJ mol(-1). Experimentally, the bicyclic 1,4-dihydronaphthalene molecule was identified as a major product of this reaction (58 ± 15%) with the 1-phenyl-1,3-butadiene contributing 34 ± 10%. The reaction is initiated by a barrierless addition of the phenyl radical to the terminal carbon atom of the 1,3-butadiene (C1/C4) to form a bound intermediate; the latter underwent hydrogen elimination from the terminal CH(2) group of the 1,3-butadiene molecule leading to 1-phenyl-trans-1,3-butadiene through a submerged barrier. The dominant product, 1,4-dihydronaphthalene, is formed via an isomerization of the adduct by ring closure and emission of the hydrogen atom from the phenyl moiety at the bridging carbon atom through a tight exit transition state located about 31 kJ mol(-1) above the separated products. The hydrogen atom was found to leave the decomposing complex almost parallel to the total angular momentum vector and perpendicularly to the rotation plane of the decomposing intermediate. The defacto barrierless formation of the 1,4-dihydronaphthalene molecule involving a single collision between a phenyl radical and 1,3-butadiene represents an important step in the formation of polycyclic aromatic hydrocarbons (PAHs) and their partially hydrogenated counterparts in combustion and interstellar chemistry.     

Selective two-quantum laser excitation of molecules with overlapping absorption lines

A method of two-quantum excitation of molecules at Doppler-broadened transitions in a standing-wave radiation field is considered. It is shown that it is possible to increase the excitation selectivity of molecules with overlapping absorption lines when using spectra of two-photon absorption. Estimations of two-quantum transition probabilities for molecular gases are given.     

Novel Diels-Alder reaction of 4-nitro-1(2H)-isoquinolones

A novel Diels-Alder (DA) reaction with 4-nitro-1(2H)-isoquinolones acting as the dienophile afforded 5(6H)-phenanthridone derivatives. The DA reaction of 4-nitro-1(2H)-isoquinolone with 1-methoxy-1,3-butadiene gave biologically active 5(6H)-phenanthridone possessing in a high yield. Regioselectivity of 4-nitro-1(2H)-isoquinolones with 1-methoxy-3-silyloxy-1,3-butadiene was calculated using molecular orbital (MO) calculations.     

Investigation of thermal transformations of propylene and its role in the formation of benzene by pyrolysis of n-hexane

Conclusions We investigated the thermal transformations of propylene and mixtures of n-hexane and propylene at 800C by use of radioactive hydrocarbons labeled with¹⁴C. The data obtained lead to the conclusion that on pyrolysis of n-hexane benzene is formed by the interaction of propylene with 1,3-butadiene or by intermediate formation of 1,3-butadiene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1556–1560, July, 1984.     

Spectroscopic analysis of small organic molecules: a comprehensive near-edge x-ray-absorption fine-structure study of C6-ring-containing molecules

We report high-resolution C 1s near-edge x-ray-absorption fine-structure (NEXAFS) spectra of the C6-ring-containing molecules benzene (C6H6), 1,3- and 1,4-cyclohexadiene (C6H8), cyclohexene (C6H10), cyclohexane (C6H12), styrene (C8H8), and ethylbenzene (C8H10) which allow us to examine the gradual development of delocalization of the corresponding pi electron systems. Due to the high experimental resolution, vibrational progressions can be partly resolved in the spectra. The experimental spectra are compared with theoretical NEXAFS spectra obtained from density-functional theory calculations where electronic final-state relaxation is accounted for. The comparison yields very good agreement between theoretical spectra and experimental results. In all cases, the spectra can be described by excitations to pi*- and sigma*-type final-state orbitals with valence character, while final-state orbitals of Rydberg character make only minor contributions. The lowest C 1s-->1pi* excitation energy is found to agree in the (experimental and theoretical) spectra of all molecules except for 1,3-cyclohexadiene (C6H8) where an energy smaller by about 0.6 eV is obtained. The theoretical analysis can explain this result by different binding properties of this molecule compared to the others.     

Comparison of experimental and density functional study on the molecular structure, infrared and Raman spectra and vibrational assignments of 6-chloronicotinic acid

The experimental and theoretical study on the structures and vibrations of 6-chloronicotinic acid (6-CNA, C(6)H(4)ClNO(2)) are presented. The Fourier transform infrared spectra (4,000-50 cm(-1)) and the Fourier transform Raman spectra (3,500-50 cm(-1)) of the title molecule in solid phase have been recorded, for the first time. The geometrical parameters and energies have been obtained for all four conformers from DFT (B3LYP) with different basis sets calculations. There are four conformers, C1, C2, C3, and C4 for this molecule. The computational results diagnose the most stable conformer of 6-CNA as the C1 form. The vibrations of the two stable and two unstable conformers of 6-CNA are researched with the aid of quantum chemical calculations. The molecular structure, vibrational frequencies, infrared intensities and Raman scattering activities and theoretical vibrational spectra were calculated a pair of molecules linked by the intermolecular OH...O hydrogen bond. The spectroscopic and theoretical results are compared to the corresponding properties for 6-CNA stable monomers and dimer of C1 conformer.