Surprisingly Different Reaction Behavior of Alkali and Alkaline Earth Metal Bis(trimethylsilyl)amides toward Bulky N‐(2‐Pyridylethyl)‐N′‐(2,6‐diisopropylphenyl)pivalamidine

N‐(2,6‐Diisopropylphenyl)‐N′‐(2‐pyridylethyl)pivalamidine (Dipp‐N=C(tBu)‐N(H)‐C₂H₄‐Py) ( 1 ), reacts with metalation reagents of lithium, magnesium, calcium, and strontium to give the corresponding pivalamidinates [(tmeda)Li{Dipp‐N=C(tBu)‐N‐C₂H₄‐Py}] ( 6 ), [Mg{Dipp‐N=C(tBu)‐N‐C₂H₄‐Py}₂] ( 3 ), and heteroleptic [{(Me₃Si)₂N}Ae{Dipp‐N=C(tBu)‐N‐C₂H₄‐Py}], with Ae being Ca ( 2 a ) and Sr ( 2 b ). In contrast to this straightforward deprotonation of the amidine units, the reaction of 1 with the bis(trimethylsilyl)amides of sodium or potassium unexpectedly leads to a β‐metalation and an immediate deamidation reaction yielding [(thf)₂Na{Dipp‐N=C(tBu)‐N(H)}] ( 4 a ) or [(thf)₂K{Dipp‐N=C(tBu)‐N(H)}] ( 4 b ), respectively, as well as 2‐vinylpyridine in both cases. The lithium derivative shows a similar reaction behavior to the alkaline earth metal congeners, underlining the diagonal relationship in the periodic table. Protonation of 4 a or the metathesis reaction of 4 b with CaI₂ in tetrahydrofuran yields N‐(2,6‐diisopropylphenyl)pivalamidine (Dipp‐N=C(tBu)‐NH₂) ( 5 ), or [(thf)₄Ca{Dipp‐N=C(tBu)‐N(H)}₂] ( 7 ), respectively. The reaction of AN(SiMe₃)₂ (A=Na, K) with less bulky formamidine Dipp‐N=C(H)‐N(H)‐C₂H₄‐Py ( 8 ) leads to deprotonation of the amidine functionality, and [(thf)Na{Dipp‐N=C(H)‐N‐C₂H₄‐Py}]₂ ( 9 a ) or [(thf)K{Dipp‐N=C(H)‐N‐C₂H₄‐Py}]₂ ( 9 b ), respectively, are isolated as dinuclear complexes. From these experiments it is obvious, that β‐metalation/deamidation of N‐(2‐pyridylethyl)amidines requires bases with soft metal ions and also steric pressure. The isomeric forms of all compounds are verified by single‐crystal X‐ray structure analysis and are maintained in solution.     

Synthese,Struktur und Reaktivität von η3‐1,2‐Diphosphaallylkomplexen sowie von [{(η5‐C5H5)(CO)2W–Co(CO)3}{μ‐AsCH(SiMe3)2}(μ‐CO)]

Syntheses, Structure and Reactivity of η³‐1,2‐Diphosphaallyl Complexes and [{(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃}{μ‐AsCH(SiMe₃)₂}(μ‐CO)] Reaction of ClP=C(SiMe₂iPr)₂ ( 3 ) with Na[Mo(CO)₃(η⁵‐C₅H₅)] afforded the phosphavinylidene complex [(η⁵‐C₅H₅)(CO)₂Mo=P=C(SiMe₂iPr)₂] ( 4 ) which in situ was converted into the η¹‐1,2‐diphosphaallyl complex [η⁵‐(C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₂iPr)₂] ( 6 ) by treatment with the phosphaalkene tBuP=C(NMe₂)₂. The chloroarsanyl complexes [(η⁵‐C₅H₅)(CO)₃M–As(Cl)CH(SiMe₃)₂] [where M = Mo ( 9 ); M = W ( 10 )] resulted from the reaction of Na[M(CO)₃(η⁵‐C₅H₅)] (M = Mo, W) with Cl₂AsCH(SiMe₃)₂. The tungsten derivative 10 and Na[Co(CO)₄] underwent reaction to give the dinuclear μ‐arsinidene complex [(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃{μ‐AsCH(SiMe₃)₂}(μ‐CO)] ( 11 ). Treatment of [(η⁵‐C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₃)₂}] ( 1 ) with an equimolar amount of ethereal HBF₄ gave rise to a 85/15 mixture of the saline complexes [(η⁵‐C₅H₅)(CO)₂Mo{η²‐tBu(H)P–P(F)CH(SiMe₃)₂}]BF₄ ( 18 ) and [Cp(CO)₂Mo{F₂PCH(SiMe₃)₂}(tBuPH₂)]BF₄ ( 19 ) by HF‐addition to the PC bond of the η³‐diphosphaallyl ligand and subsequent protonation ( 18 ) and/or scission of the PP bond by the acid ( 19 ). Consistently 19 was the sole product when 1 was allowed to react with an excess of ethereal HBF₄. The products 6 , 9 , 10 , 11 , 18 and 19 were characterized by means of spectroscopy (IR, ¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR, MS). Moreover, the molecular structures of 6 , 11 and 18 were determined by X‐ray diffraction analysis.     

Solvent dependence of the solid‐state structures of salicylaldiminate magnesium amide complexes

There are challenges in using magnesium coordination complexes as reagents owing to their tendency to adopt varying aggregation states in solution and thus impacting the reactivity of the complexes. Many magnesium complexes are prone to ligand redistribution via Schlenk equilibrium due to the ionic character within the metal–ligand interactions. The role of the supporting ligand is often crucial for providing stability to the heteroleptic complex. Strategies to minimize ligand redistribution in alkaline earth metal complexes could include using a supporting ligand with tunable sterics and electronics to influence the degree of association to the metal atom. Magnesium bis(hexamethyldisilazide) was reacted with salicylaldimines [¹L = N‐(2,6‐diisopropylphenyl)salicylaldimine and ²L = 3,5‐di‐tert‐butyl‐N‐(2,6‐diisopropylphenyl)salicylaldimine] in either nondonor (toluene) or donor solvents [tetrahydrofuran (THF) or pyridine]. The structures of the magnesium complexes were studied in the solid state via X‐ray diffraction. In the nondonor solvent, i.e. toluene, the heteroleptic complex bis{μ‐2‐[(2,6‐diisopropylphenyl)iminomethyl]phenolato}‐κ³N,O:O;κ³O:N,O‐bis[(hexamethyldisilazido‐κN)magnesium(II)], [Mg₂(C₁₉H₂₂NO)₂(C₆H₁₈NSi₂)₂] or [¹LMgN(SiMe₃)₂]₂, (1), was favored, while in the donor solvent, i.e. pyridine (pyr), the formation of the homoleptic complex {2,4‐di‐tert‐butyl‐6‐[(2,6‐diisopropylphenyl)iminomethyl]phenolato‐κ²N,O}bis(pyridine‐κN)magnesium(II) toluene monosolvate, [Mg(C₂₇H₃₈NO)₂(C₅H₅N)₂]·C₅H₅N or [{²L₂Mg₂(pyr)₂}·pyr], (2), predominated. Heteroleptic complex (1) was crystallized from toluene, while homoleptic complexes (2) and the previously reported [¹L₂Mg·THF] [Quinque et al. (2011). Eur. J. Inorg. Chem. pp. 3321–3326] were crystallized from pyridine and THF, respectively. These studies support solvent‐dependent ligand redistribution in solution. In‐situ¹H NMR experiments were carried out to further probe the solution behavior of these systems.     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.     

Linear hydrogen‐bonded molecular tapes in the cocrystals of squaric acid with 4,4′‐dipyridylacetylene and 1,2‐bis(4‐pyridyl)ethylene

The title compounds, 4,4′‐(ethyne‐1,2‐diyl)­dipyridinium bis(squarate), C₁₂H₁₀N₂²⁺·2C₄HO₄^?, and 4,4′‐(ethene‐1,2‐diyl)­dipyridinium bis­(squarate), C₁₂H₁₂N₂²⁺·2C₄HO₄^?, are isomorphous and crystallize in space group P. The cocrystals contain linear hydrogen‐bonded molecular tape structures along the [120] direction. The squarate monoanions form a ten‐membered dimer linked by two intermolecular O—H?O hydrogen bonds. Each component mol­ecule forms a segregated stack along the c axis. The bond lengths of the squarate monoanion indicate delocalization of the enolate anion.     

Alternating copolymerization of cyclohexene oxide and carbon dioxide catalyzed by noncyclopentadienyl rare‐earth metal bis(alkyl) complexes

The syntheses of several dialkyl complexes based on rare‐earth metal were described. Three β‐diimine compounds with varying N‐aryl substituents (HL¹=(2‐CH₃O(C₆H₄))N?C(CH₃)CH?C(CH₃)NH(2‐CH₃O(C₆H₄)), HL² = (2,4,6‐(CH₃)₃ (C₆H₂))N?C(CH₃)CH?C(CH₃)NH(2,4,6‐(CH₃)₃(C₆H₂)), HL³ = PhN?C(CH₃)CH(CH₃) NHPh) were treated with Ln(CH₂SiMe₃)₃(THF)₂ to give dialkyl complexes L¹Ln (CH₂SiMe₃)₂ (Ln = Y ( 1a ), Lu ( 1b ), Sc ( 1c )), L²Ln(CH₂SiMe₃)₂(THF) (Ln = Y ( 2a ), Lu ( 2b )), and L³Lu(CH₂SiMe₃)₂(THF) (3). All these complexes were applied to the copolymerization of cyclohexene oxide (CHO) and carbon dioxide as single‐component catalysts. Systematic investigation revealed that the central metal with larger radii and less steric bulkiness were beneficial for the copolymerization of CHO and CO₂. Thus, methoxy‐modified β‐diiminato yttrium bis(alkyl) complex 1a , L¹Y(CH₂SiMe₃)₂, was identified as the optimal catalyst, which converted CHO and CO₂ to polycarbonate with a TOF of 47.4 h^?1 in 1,4‐dioxane under a 15 bar of CO₂ atmosphere (T_p=130 °C), representing the highest catalytic activity achieved by rare‐earth metal catalyst. The resultant copolymer contained high carbonate linkages (>99%) with molar mass up to 1.9 × 10⁴ as well as narrow molar mass distribution (M_w/M_n = 1.7). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6810–6818, 2008     

Four NiII complexes with the new cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane

Although it has not proved possible to crystallize the newly prepared cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane (L^Im1), the trans and cis isomers of an Ni^II complex, namely trans‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) monohydrate, [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂·H₂O, (1), and cis‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate), [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂, (2), have been prepared and structurally characterized. At different stages of the crystallization and thermal treatment from which (1) and (2) were obtained, a further two compounds were isolated in crystalline form and their structures also analysed, namely trans‐{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}(perchlorato)nickel(II) perchlorate, [Ni(ClO₄)(C₁₅H₃₀N₆)]ClO₄, (3), and cis‐{1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) 0.24‐hydrate, [Ni(C₂₀H₃₆N₆)](ClO₄)₂·0.24H₂O, (4); the 1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane ligand is a minor side product, probably formed in trace amounts in the synthesis of L^Im1. The configurations of the cyclam macrocycles in the complexes have been analysed and the structures are compared with analogues from the literature.     

Bis(μ‐2‐{5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,3,4‐oxadiazol‐2‐yl}phenolato)bis[(acetylacetonato)copper(II)]: a novel binuclear metallocycle

The new asymmetric ligand 2‐{5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,3,4‐oxadiazol‐3‐yl}phenol (HL) has been used to synthesize the novel discrete title binuclear metallocycle, [Cu₂(C₁₄H₁₀N₃O₂S)₂(C₅H₇O₂)₂] or Cu₂L₂(acac)₂ (acac is acetylacetonate). Each Cu^II centre is five‐coordinate and adopts a square‐pyramidal geometry. Two ligands are connected by two Cu^II cations to form the dinuclear metallocycle, which lies across a crystallographic inversion centre. Discrete molecules are linked into a two‐dimensional structure through weak Cu...S, C—H...π and π–π interactions.     

A helical zinc(II) coordination polymer assembled from 1,3‐bis[(pyridin‐3‐yl)methoxy]benzene and benzene‐1,4‐dicarboxylic acid

In catena‐poly[[aqua[1,3‐bis(pyridine‐3‐ylmethoxy)benzene‐κN]zinc(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O¹:O⁴], [Zn(C₈H₄O₄)(C₁₈H₁₆N₂O₂)(H₂O)]_n, each Zn^II centre is tetrahedrally coordinated by two O atoms of bridging carboxylate groups from two benzene‐1,4‐dicarboxylate anions (denoted L²⁻), one O atom from a water molecule and one N atom from a 1,3‐bis[(pyridin‐3‐yl)methoxy]benzene ligand (denoted bpmb). (Aqua)O—H...N hydrogen‐bonding interactions induce the formation of one‐dimensional helical [Zn(L)(bpmb)(H₂O)]_n chains which are interlinked through (aqua)O—H...O hydrogen‐bonding interactions, producing two‐dimensional corrugated sheets.     

catena‐Poly[copper(II)‐di‐μ‐acetylacetonato‐copper(II)‐bis(μ‐4‐hydroxy‐3‐methoxybenzaldehyde picoloylhydrazonato)] and (acetylacetonato)(4‐methoxybenzaldehyde picoloylhydrazonato)copper(II)

In the two title copper(II) complexes, [CuL(C₅H₇O₂)]_n, (I), and [CuL′(C₅H₇O₂)], (II), respectively, where HL is 4‐hydroxy‐3‐methoxybenzaldehyde picoloylhydrazone, C₁₄H₁₂N₃O₃, and HL′ is 4‐methoxybenzaldehyde picoloylhydrazone, C₁₄H₁₂N₃O₂, the Cu^II ions display a highly Jahn–Teller‐distorted octahedral and a square‐planar coordination geometry, respectively. In complex (I), two neighbouring Cu^II atoms are bridged by L⁻ and acetylacetonate, alternately, giving rise to a one‐dimensional chain of CuN₂O₄ octahedra interconnected by these two ligands along the a axis. In addition, the hydroxy H atom of the vanillin group connects to the carboxyl O atom of the adjacent chain via an O—H...O hydrogen bond, giving rise to a three‐dimensional supramolecular assembly. Complex (II) displays a discrete structure.     

A one‐dimensional coordination polymer of 5‐[(imidazol‐1‐yl)methyl]benzene‐1,3‐dicarboxylic acid with CuII cations

5‐[(Imidazol‐1‐yl)methyl]benzene‐1,3‐dicarboxylic acid (H₂L) was synthesized and the dimethylformamide‐ and dimethylacetamide‐solvated structures of its adducts with Cu^II, namely catena‐poly[[copper(II)‐bis[μ‐3‐carboxy‐5‐[(imidazol‐1‐yl)methyl]benzoato]] dimethylformamide disolvate], {[Cu(C₁₂H₉N₂O₄)₂]·2C₃H₇NO}_n, (I), and catena‐poly[[copper(II)‐bis[μ‐3‐carboxy‐5‐[(imidazol‐1‐yl)methyl]benzoato]] dimethylacetamide disolvate], {[Cu(C₁₂H₉N₂O₄)₂]·2C₄H₉NO}_n, (II), the formation of which are associated with mono‐deprotonation of H₂L. The two structures are isomorphous and isometric. They consist of one‐dimensional coordination polymers of the organic ligand with Cu^II in a 2:1 ratio, [Cu(μ‐HL)₂]_n, crystallizing as the dimethylformamide (DMF) or dimethylacetamide (DMA) disolvates. The Cu^II cations are characterized by a coordination number of six, being located on centres of crystallographic inversion. In the polymeric chains, each Cu^II cation is linked to four neighbouring HL⁻ ligands, and the organic ligand is coordinated via Cu—O and Cu—N bonds to two Cu^II cations. In the corresponding crystal structures of (I) and (II), the coordination chains, aligned parallel to the c axis, are further interlinked by strong hydrogen bonds between the noncoordinated carboxy groups in one array and the coordinated carboxylate groups of neighbouring chains. Molecules of DMF and DMA (disordered) are accommodated at the interface between adjacent polymeric assemblies. This report provides the first structural evidence for the formation of coordination polymers with H₂Lvia multiple metal–ligand bonds through both carboxylate and imidazole groups.     

Di‐μ‐hydroxido‐bis{[bis(6‐methyl‐2‐pyridylmethyl)(2‐phenylethyl)amine‐κ3N′,N′′,N′′′]copper(II)} bis(perchlorate)

The title compund, [Cu₂(OH)₂(C₂₂H₂₅N₃)₂](ClO₄)₂, is a copper(II) dimer, with two [CuL]²⁺ units [L is bis(6‐methyl‐2‐pyridylmethyl)(2‐phenylethyl)amine] bridged by hydroxide groups to define the {[CuL](μ‐OH)₂[CuL]}²⁺ cation. Charge balance is provided by perchlorate counter‐anions. The cation has a crystallographic inversion centre halfway between the Cu^II ions, which are separated by 3.0161 (8) Å. The central core of the cation is an almost regular Cu₂O₂ parallelogram of sides 1.931 (2) and 1.935 (2) Å, with a Cu—O—Cu angle of 102.55 (11)°. The coordination geometry around each Cu^II centre can be best described as a square‐based pyramid, with three N atoms from L ligands and two hydroxide O atoms completing the coordination environment. Each cationic unit is hydrogen bonded to two perchlorate anions by means of hydroxide–perchlorate O—H...O interactions.     

Bis{2‐[(phenylimino)ethyl]‐1H‐pyrrol‐1‐ido‐κ2N,N′}nickel(II): a supramolecular structure formed by C—H...π hydrogen bonds

In the title compound, [Ni(C₁₂H₁₁N₂)₂], the Ni^II cation lies on an inversion centre and has a square‐planar coordination geometry. This transition metal complex is composed of two deprotonated N,N′‐bidentate 2‐[(phenylimino)ethyl]‐1H‐pyrrol‐1‐ide ligands around a central Ni^II cation, with the pyrrolide rings and imine groups lying trans to each other. The Ni—N bond lengths range from 1.894 (3) to 1.939 (2) Å and the bite angle is 83.13 (11)°. The Ni—N(pyrrolide) bond is substantially shorter than the Ni—N(imino) bond. The planes of the phenyl rings make a dihedral angle of 78.79 (9)° with respect to the central NiN₄ plane. The molecules are linked into simple chains by an intermolecular C—H...π interaction involving a phenyl β‐C atom as donor. Intramolecular C—H...π interactions are also present.     

Conformational isomers of the [(5‐methyl‐2‐pyridinio)aminomethylene]diphosphonate dianion and [(5‐methyl‐2‐pyridyl)aminomethylene]diphosphonate trianion in salts with 4‐aminopyridine and ammonia

The crystal structures of two salts, products of the reactions between [(5‐methyl‐2‐pyridyl)aminomethylene]bis(phosphonic acid) and 4‐aminopyridine or ammonia, namely bis(4‐aminopyridinium) hydrogen [(5‐methyl‐2‐pyridinio)aminomethylene]diphosphonate 2.4‐hydrate, 2C₅H₇N₂⁺·C₇H₁₀N₂O₆P₂²⁻·2.4H₂O, (I), and triammonium hydrogen [(5‐methyl‐2‐pyridyl)aminomethylene]diphosphonate monohydrate, 3NH₄⁺·C₇H₉N₂O₆P₂³⁻·H₂O, (II), have been determined. In (I), the Z configuration of the ring N—C and amino N—H bonds of the bisphosphonate dianion with respect to the C_ring—N_amino bond is consistent with that of the parent zwitterion. Removing the H atom from the pyridyl N atom results in the opposite E configuration of the bisphosphonate trianion in (II). Compound (I) exhibits a three‐dimensional hydrogen‐bonded network, in which 4‐aminopyridinium cations and water molecules are joined to ribbons composed of anionic dimers linked by O—H...O and N—H...O hydrogen bonds. The supramolecular motif resulting from a combination of these three interactions is a common phenomenon in crystals of all of the Z‐isomeric zwitterions of 4‐ and 5‐substituted (2‐pyridylaminomethylene)bis(phosphonic acid)s studied to date. In (II), ammonium cations and water molecules are linked to chains of trianions, resulting in the formation of double layers.     

From a Phosphaketenyl‐Functionalized Germylene to 1,3‐Digerma‐2,4‐diphosphacyclobutadiene

The first 4π‐electron resonance‐stabilized 1,3‐digerma‐2,4‐diphosphacyclobutadiene [L^H₂Ge₂P₂] 4 (L^H=CH[CHNDipp]₂ Dipp=2,6‐ⁱPr₂C₆H₃) with four‐coordinate germanium supported by a β‐diketiminate ligand and two‐coordinate phosphorus atoms has been synthesized from the unprecedented phosphaketenyl‐functionalized N‐heterocyclic germylene [L^HGe‐P=C=O] 2 a prepared by salt‐metathesis reaction of sodium phosphaethynolate (P≡C?ONa) with the corresponding chlorogermylene [L^HGeCl] 1 a . Under UV/Vis light irradiation at ambient temperature, release of CO from the P=C=O group of 2 a leads to the elusive germanium–phosphorus triply bonded species [L^HGe≡P] 3 a , which dimerizes spontaneously to yield black crystals of 4 as isolable product in 67 % yield. Notably, release of CO from the bulkier substituted [L^tBuGe‐P=C=O] 2 b (L^tBu=CH[C(^tBu)N‐Dipp]₂) furnishes, under concomitant extrusion of the diimine [Dipp‐NC(^tBu)]₂, the bis‐N,P‐heterocyclic germylene [DippNC(^tBu)C(H)PGe]₂ 5 .     

Synthesis,Structure, and Catalytic Behavior of Ytterbium Complexes Derived from a Linked Bis(β‐ketoiminato) Ligand

Ytterbium complexes supported by a linked bis(β‐ketoiminato) ligand, N,N′‐ethylenebis(benzoylacetoimine) (H₂L), were synthesized and their catalytic behavior was explored. The reaction of YbCl₃ with 1 equiv. of LLi₂ afforded the mononuclear ytterbium chloride LYbCl(THF)₂ ( 1 ) in high yield. Complex 1 can be used as starting material to prepare β‐ketoiminate‐ytterbium derivatives. Treatment of complex 1 with NaN(SiMe₃)₂ produced the dimeric ytterbium amide {LYb[N(SiMe₃)₂]}₂ ( 2 ), while the similar reaction of complex 1 with NaOAr (ArO = 2, 6‐tBu‐4‐MeC₆H₂O) led to the mononuclear ytterbium aryloxide LYbOAr(THF) ( 3 ). The three complexes were well detected by elemental analysis and single‐crystal X‐ray analysis. It was found that complexes 2 and 3 can initiate the ring‐opening polymerization of ?‐caprolactone with moderate activity.     

Steric and Electronic Requirements in the Synthesis of 2,3‐Dihydro‐4(1H)‐quinolinones by the Tandem Michael‐SNAr Reaction

The steric and electronic requirements have been investigated for the synthesis of 2,3‐dihydro‐4(1H)‐quinolinones by the tandem Michael‐S_NAr reaction. Substrates bearing a single methyl group at the β‐enone carbon gave excellent yields of the title compounds from both the E and Z isomers with X═H or NO₂. Substrates with β,β‐dimethyl substitution at the Michael terminus gave low yields of heterocyclic products in molecules having monoactivated S_NAr aromatic acceptor rings (X═H) and very good yields for diactivated systems (X═NO₂). For these hindered substrates, success in the final cyclization hinges on the ability of the aromatic acceptor to capture the pendant nitrogen nucleophile of the initial Michael adduct before this intermediate can revert to starting materials.     

Synthesis of ferrocene‐containing N‐aryloxo β‐ketoiminate lanthanide complexes and polymerization of ε‐caprolactone

The synthesis, characterization and ε‐caprolactone polymerization behavior of lanthanide amido complexes stabilized by ferrocene‐containing N‐aryloxo functionalized β‐ketoiminate ligand FcCOCH₂C(Me)N(2‐HO‐5‐Bu^t‐C₆H₃) (LH₂, Fc = ferrocenyl) are described. The lanthanide amido complexes [LLnN(SiMe₃)₂(THF)]₂ [Ln = Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] were synthesized in good yields by the amine elimination reactions of LH₂ with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF. These complexes were characterized by IR spectroscopy and elemental analysis, and ¹H NMR spectroscopy was added for the analysis of complex 4 . The definitive molecular structures of complexes 1 and 3 were determined by X‐ray diffraction studies. Complexes 1 – 4 can initiate the ring‐opening polymerization of ε‐caprolactone with moderate activity. Copyright © 2011 John Wiley & Sons, Ltd.     

A concise synthesis of a highly substituted 6‐(1H‐benzimidazol‐1‐yl)‐5‐nitrosopyrimidin‐2‐amine: synthetic sequence and the molecular and supramolecular structures of one product and two intermediates

A concise and efficient synthesis of 6‐benzimidazolyl‐5‐nitrosopyrimidines has been developed using Schiff base‐type intermediates derived from N⁴‐(2‐aminophenyl)‐6‐methoxy‐5‐nitrosopyrimidine‐2,4‐diamine. 6‐Methoxy‐N⁴‐{2‐[(4‐methylbenzylidene)amino]phenyl}‐5‐nitrosopyrimidine‐2,4‐diamine, (I), and N⁴‐{2‐[(ethoxymethylidene)amino]phenyl}‐6‐methoxy‐5‐nitrosopyrimidine‐2,4‐diamine, (III), both crystallize from dimethyl sulfoxide solution as the 1:1 solvates C₁₉H₁₈N₆O₂·C₂H₆OS, (Ia), and C₁₄H₁₆N₆O₃·C₂H₆OS, (IIIa), respectively. The interatomic distances in these intermediates indicate significant electronic polarization within the substituted pyrimidine system. In each of (Ia) and (IIIa), intermolecular N—H…O hydrogen bonds generate centrosymmetric four‐molecule aggregates. Oxidative ring closure of intermediate (I), effected using ammonium hexanitratocerate(IV), produced 4‐methoxy‐6‐[2‐(4‐methylphenyl‐1H‐benzimidazol‐1‐yl]‐5‐nitrosopyrimidin‐2‐amine, C₁₉H₁₆N₆O₂, (II) [Cobo et al. (2018). Private communication (CCDC 1830889). CCDC, Cambridge, England], where the extent of electronic polarization is much less than in (Ia) and (IIIa). A combination of N—H…N and C—H…O hydrogen bonds links the molecules of (II) into complex sheets.     

Cyclohydroamination of Aminoalkenes Catalyzed by Disilazide Alkaline‐Earth Metal Complexes: Reactivity Patterns and Deactivation Pathways

The behavior of the first aminophenolate catalysts of the large alkaline earth metals (Ae) [(LOⁱ)AeN(SiMe₂R)₂(thf)_x] (i=1–4; Ae=Ca, Sr, Ba; R=H, Me; x=0–2) for the cyclohydroamination of terminal aminoalkenes is discussed. The complexes [(BDI)AeN(SiMe₂H)₂(thf)_x] (Ae=Ca, Sr, Ba, x=1–2; (BDI)H=H₂C[C(Me)N‐2,6‐(iPr)₂C₆H₃]₂)) and [(BDI)CaN(SiMe₃)₂(thf)] supported by the β‐diketiminate (BDI)^? ligand have also been employed for comparative and mechanistic considerations. The catalytic performances decrease in the order Ca>Sr?Ba, which is the opposite trend to that previously observed during the intermolecular hydroamination of activated alkenes catalyzed by the same alkaline‐earth metal complexes. Catalyst efficacy increases when the chelating and donating ability of the aminophenolate ligands decreases. For given metals and ancillary scaffolds, disilazide catalysts that incorporate the N(SiMe₃)₂^? amido group outclass their congeners containing the N(SiMe₂H)₂^? amide owing to the lower basicity of the N(SiMe₂H)₂^? with respect to the N(SiMe₃)₂^? group, and also because Ae–N(SiMe₂H)₂ catalysts suffer from irreversible deactivation through the dehydrogenative coupling of amine and hydrosilane moieties. This deactivation process takes place at 25 °C in the case of [(LOⁱ)AeN(SiMe₂H)₂(thf)_x] phenolate complexes and occurs even with the related [(BDI)AeN(SiMe₂H)₂(thf)_x] complex, albeit under conditions harsher than those required for effective cyclohydroamination catalysis. A mechanistic scenario for cyclohydroamination catalyzed by [(LX)AeN(SiMe₂H)₂(thf)_x] complexes ((LX)^?=(LOⁱ)^? or (BDI)^?) is proposed. Although beneficial for the synthesis of Ae heteroleptic complexes able to resist deleterious Schlenk‐type equilibria, the use of the N(SiMe₂H)₂^? is prejudicial to catalytic activity in the case of catalyzed transformations that involve reactive amine (and potentially other) substrates. Mechanistic and kinetic investigations further illustrate the interplay between the catalytic activity, operative mechanism, and identity of the metal, ancillary ligand, and amido group. These studies suggest that the widely accepted mechanism for cyclohydroamination reactions cannot be extended systematically to all alkaline‐earth catalysts. The [(BDI)CaN(SiMe₂H)₂{H₂NCH₂C(CH₃)₂CH₂CH?CH₂}₂] complex, the first Ca–aminoalkene adduct structurally characterized, was prepared quantitatively and essentially behaves like [(BDI)CaN(SiMe₂H)(thf)], thus serving as a model compound for mechanistic studies, as illustrated during stoichiometric reactions monitored by ¹H NMR spectroscopy.