Design of photonic band gap structures through a dual-beam multiple exposure technique

We present a dual-beam multiple exposure technique that can generate complex 2-D and 3-D band gap template structures in a photosensitive material. The system parameters related to the planar interference pattern produced by two laser beams and reorientation effect of the sample relative to these planes is presented. Structures such as the 2-D, square and hexagonal arrays of dielectric “rods” and “holes” and the 3-D, cubic, Yablonovite and other profiles are given. We perform band gap calculations on these structures when the dielectric contrast has been increased using a backfill process and discuss techniques for increasing the band gap by sculpting the dielectric profile.     

Optimization of the wallplug-efficiency of laser diodes by an electro-optical-thermal black-box model

A black-box model for the optimization of the wallplug efficiency by choosing appropriate “external” parameters of an edge emitting laser – resonator length, operating current – is presented and applied to a high-power laser and a communication laser.     

“TEPOL” Code for Computer Modeling of Laser Annealing of Thin Foils

A physical and mathematical model and a “TEPOL” 2D code are developed for simulation of laser annealing of thin ferroelectric heterostructures. The results of a test problem calculation are presented. An opportunity for improving the sample heating homogeneity using a transparent coating for the laser beam layer is discussed.__________Translated from a Preprint No. 3 of the P. N. Lebedev Physical Institute, Moscow (2005).     

Trellis ternary line coding scheme for asynchronous optical CDMA systems

In this paper, we investigate the employment of a ternary line coding technique based on Ungerboeck's trellis-coded method in asynchronous optical CDMA systems. The ternary coding we use is predicated upon the equal-weight orthogonal (EWO) scheme. Each user transmits two mutually orthogonal signature sequences to represent “+1” and “−1”, respectively, and nothing is transmitted for “0”. The receiver employs a maximum-likelihood soft-decoder to select the path with minimum Euclidean distance as the preferred path. This trellis ternary coding scheme applies set partitioning with partially overlapping subsets to increase the free Euclidean distance, which considerably improves system performance. Furthermore, due to line coding technique, such scheme comprises sufficient clock information, and thus benefits for baseband timing extraction (i.e. clock recovery). Numerical results reveal that the proposed trellis ternary coding scheme can significantly reduce the error floor and allow more active users to be accommodated in the network.     

On the theory of temporal aberrations for cathode lenses

A new approach to the theory of temporal aberration for cathode lenses is given in the present paper. A definition of temporal aberration is given in which a certain initial energy of electron emission along the axial direction ε_z1 (0ε_z1ε_0max) is considered. A new method to calculate the temporal aberration coefficients of cathode lenses named “direct integral method” is also presented. The “direct integral method” gives new expressions of the temporal aberration coefficients which are expressed in integral forms. The difference between “direct integral method” and “τ-variation method” is that the “τ-variation method” needs to solve the differential equations for the three of temporal geometrical aberration coefficients of second order, while the “direct integral method” only needs to carry out the integral calculation for all of these temporal aberration coefficients of second order.All of the formulae of the temporal aberration coefficients deduced from “direct integral method” and “τ-variation method” have been verified by an electrostatic concentric spherical system model, and contrasted with the analytical solutions. Results show that these two methods have got identical solutions and the solutions of temporal aberration coefficients of the first and second order are the same as with the analytical solutions. Although some forms of the results seem different, but they can be transformed into the same form. Thus, it can be concluded these two methods given by us are equivalent and correct, but the “direct integral method” is related to solve integral equations, which is more convenient for computation and could be suggested for use in practical design.     

High speed and high accuracy inspection of in-tray laser IC marking using line scan CCD with a new calibration model

This study used a high-speed high-resolution line scan CCD, and a Delta motor drive module to provide position feedback in a laser marking system. Based on a novel algorithm, image processing of the high-speed CCD scan was allowed the accurate determination of the laser marking location. This system was calibrated using a template, and a novel 1-D calibration model of the line scan CCD was developed. The relevant position of each IC in the tray was obtained based on the calibration algorithm. Gain and offset calibration, sub-pixel calculation, and normalized checks were performed in this automatic optical inspection system. The total processing time for laser correction marking, scanning and identification was about 2～2.5 s, the positioning accuracy was×9 μm, and the industrial specification and process capability index Cpk reached over 1.2.     

An “instantaneous” distribution of the ionization-passive electrons and holes under irradiation of a dielectric by intense electron or laser beams

A method is worked out for calculation of an “instantaneous” energy distribution of the ionization-passive electrons and holes resulting from the electron-electron collisions before the onset of electron-phonon relaxation under 10⁻¹⁵–10⁻¹⁴ s irradiation of a dielectric by an intense electron or laser beam. The method is based on the solution of a system of integral-differential kinetic equations of general form. The Auger and impact ionization as well as hole recoil due to the momentum conservation law are taken into account in calculations. The “instantaneous” distribution is calculated in NaCl under irradiation of the sample by a high-density electron beam. The “instantaneous” distribution of ionization-passive electrons and holes is the initial one in solutions of all kinetic equations describing further relaxation of electron excitations in irradiated materials.__________Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 11, pp. 15–22, November, 2004.     

Three-dimensional diffuse optical imaging of hand joints: System description and phantom studies

In this paper we describe a three-dimensional (3D) continuous wave (CW) diffuse optical tomography (DOT) system and present 3D volumetric reconstruction studies using this DOT system with simple phantom models that simulate hand joints. The CCD-based DOT system consists of 64×64 source/detector fiber optic channels, which are arranged in four layers, forming a cylindrical fiber optic/tissue interface. Phantom experiments are used to evaluate system performance with respective to axial spatial resolution, optical contrast and target position for detection of osteoarthritis where cartilage is the primary target region of interest. These phantom studies suggest that we are able to quantitatively resolve a 2 mm thick “cartilage” and qualitatively resolve a 1 mm thick “cartilage” using our 3D reconstruction approach. Our results also show that optical contrast of 3:1–7:1 between the “disease cartilage” and normal cartilage can be quantitatively recovered. Finally, the target position along axial direction on image reconstruction is studied. All the images are obtained using our 3D finite-element-based reconstruction algorithm.     

Belting and pop, nonclassical approaches to the female middle voice: Some preliminary considerations

There is a commonly perceived difference in the sound produced in the approximate range D₄-D₅ by female singers in the western opera and concert tradition, on the one hand, and certain other styles, including rock, pop, folk, and some Broadway musicals, on the other. The term “belting” is sometimes used to refer to at least one approach to such “nonclassical” singing. In this study, based on spectrographic, electroglottographic, and sub- and supraglottal pressure measurements on representative voices of the “operatic” and “nonclassical” tradition, acoustic and laryngeal differences between the two traditions are described, and an objective, specific definition of “belting” is offered.     

Beyond nanosizing: an approach to shape analysis of fluorescent nanostructures by SMI-microscopy

Using spatially modulated illumination (SMI) light microscopy it is possible to measure the sizes of fluorescent structures that have an extension far below the conventional optical resolution limit (“subresolution size”). Presently, the sizes are determined as the object extension along the optical axis of the SMI microscope. For this, however, “a priori” assumptions on the fluorochrome distribution (“shape”) within the examined fluorescent structure have to be made. Usually it is assumed that the fluorochrome follows a Gauss-distribution or a spherical distribution. In this report we overcome the necessity to make an assumption on the shape of the fluorochrome distribution. We introduce two new experimentally obtained parameters which allow the determination of a shape measure to describe the spatial distribution of the fluorescent dye. This becomes possible by independent measurements with different excitation wavelengths. As an example, we present shape parameter measurements on individual fluorescent microspheres with a nominal geometrical diameter (“size”) of 190 nm. In the case investigated, the experimental shape correlated well with a homogeneous fluorochrome distribution (“spherical shape”) but not with a variety of other “shapes”.     

Particle on surface: 3D-effects in dry laser cleaning

Previous analysis of dry laser cleaning within the frame of a one-dimensional (1D) model with homogeneous surface heating shows that this model disagrees with experiments by one–two orders of magnitude. The particle on the surface produces an inhomogeneous intensity distribution in its vicinity due to scattering and diffraction. This produces a nonstationary 3D distribution of the temperature and nonstationary 3D thermal deformations of the surface. If one uses the Mie theory for calculation of inhomogeneous intensity then in some region of the parameters, the 3D model predicts results close to the experimental ones. The next step was done when the scattering effects for radiation reflected from the surface was taken into account (so-called “particle on surface” problem). This approach yields results close to the experimental one within the wide range of parameters. PACS 42.25.Fx; 42.25.Hz; 81.65.CfAn erratum to this article can be found at .     

Low-magnification particle positioning for 3D velocimetry applications

Three-dimensional (3D) position and velocity information can be extracted by directly analysing the scattering patterns in velocimetry imaging of seeding particles using real-time CCD cameras. A Fraunhöfer diffraction simplification of generalised Lorenz–Mie theory is shown to yield a representative model of particle position, such that particle position can be approximately deduced from typical experimental particle images. Data are obtained by pattern-matching theoretical to experimental images using a Nelder–Mead algorithm, subject to digitisation considerations and the concept of “locales”. In this way, information about the characteristics of positional error as a function of magnification, pixel size, intensity resolution, and spatial resolution can be derived. This work shows that an optimum magnification exists, beneath which error begins to increase drastically. A practical application is demonstrated. The theory, simulations and experimental verification of this basic problem are discussed.     

Transmission of return-to-zero pulses in an optical split-step system based on reflecting fiber gratings

A new variety of the “soliton management” in heterogeneous optical media is proposed. The system is composed as a periodic chain of nonlinear fibers with negligible intrinsic group-velocity dispersion (GVD), alternating with sections of unchirped fiber Bragg gratings (FBGs) operating in the reflection regime. Losses due to incomplete reflection are compensated by linear amplifiers. The model may apply to fiber-optic telecommunication links with periodically installed FBG modules, and it may be used for the design of laser setups. By means of extended simulations, we identify small regions in the underlying parameter space where this model, featuring the periodic separation of the Kerr nonlinearity and FBG-induced GVD (hence the name of the “split-step” system), supports stable transmission of RZ (return-to-zero) pulses, i.e., quasi-solitons. The effect of nonzero fiber’s GVD on the stable transmission regime is considered too. Moderately unstable (partly usable) transmission regimes are found in larger regions of the parameter space; they may be of two different types, with the average nonlinearity either undercompensating or overcompensating the GVD. Interactions between the stable RZ pulses are also studied, leading to the identification of a minimum separation between them necessary for the suppression of interaction effects.     

Study on a Bessel–Gaussian beam laser

A new concept and the method are presented to obtain a laser beam output with high luminance and quality. Instead of using the conventional concept of “obtaining a single transverse mode through compressing the oscillating mode volume using a small aperture diaphragm”, the large multimode volume and the high output power are obtained by studying the physical mechanism of the expansion and coupling between a Bessel beam and a Gaussian beam. A high quality light beam (close to the diffraction limit) with high luminance and large intensity difference between the center and the edge is achieved simultaneously.     

Inspecting verticality of cylindrical workpieces via multi-vision sensors based on structured light

In mechanical manufacturing industry, cylindrical workpiece is one of the most commonly used type of man-made workpieces, and the verticality inspection is a very important task for guaranteeing the quality of the workpieces. In this paper, we proposed a system to inspect the verticality of cylindrical workpieces via multi-vision sensors based on structured light, which has many advantages compared with the traditional methods: fast, on-line, non-contact, flexible and remarkably more accurate. The principles and methods about how to inspect the verticality were given in details, and a real system was set up to carry out the experiments. In the system, a “sensor-unit” which consists of two stripe structured light sensors is used to address the problem of short light stripe. The experiment results indicate a high capability of the proposed system for inspecting large workpieces.     

Diffractive multi-beam surface micro-processing using 10 ps laser pulses

A high repetition rate picosecond laser system is combined with a spatial light modulator (SLM) for diffractive multiple beam processing. The effect of the zero order beam is eliminated by adding a Fresnel zone lens (FZL) to defocus the un-diffracted beam at the processing plane. Chromatic dispersion, which is evident with a large bandwidth femtosecond pulses leading to the problem of distorted hole shape is eliminated due to the much narrower spectral bandwidth, 0.1 nm at 10 ps pulselength, resulting in highly uniform intensity spots, independent of diffraction angle. In addition, high-throughput processing is demonstrated by combining the high power laser output, 2.5 W at λ ≈ 1064 nm and fast repetition rate, f ≈ 20 kHz with P > 1.2 W diffracted into 25 parallel beams. This has the effect of creating an “effective” repetition rate of 500 kHz without restrictive scan speeds.     

Nucleation and growth mechanism for flame synthesis of MoO2 hollow microchannels with nanometer wall thickness

The growth and morphological evolution of molybdenum-oxide microstructures formed in the high temperature environment of a counter-flow oxy-fuel flame using molybdenum probes is studied. Experiments conducted using various probe retention times show the sequence of the morphological changes. The morphological row begins with micron size objects exhibiting polygonal cubic shape, develops into elongated channels, changes to large structures with leaf-like shape, and ends in dendritic structures. Time of probe–flame interaction is found to be a governing parameter controlling the wide variety of morphological patterns; a molecular level growth mechanism is attributed to their development. This study reveals that the structures are grown in several consecutive stages: material “evaporation and transportation”, “transformation”, “nucleation”, “initial growth”, “intermediate growth”, and “final growth”. XRD analysis shows that the chemical compositions of all structures correspond to MoO₂.     

Study of baryon production mechanism in ee annihilation into hadrons

The mechanism of baryon-anti-baryon pair production in e⁺e⁻ annihilation into hadrons has been studied using the TOPAZ detector at the TRISTAN e⁺e⁻ collider at an average center-of-mass energy of 58 GeV. The distributions of various correlations were compared with two prominent models: the cluster-fragmentation model and the string-fragmentation model. We rejected the cluster-fragmentation model at the 90% C.L. Furthermore, in the context of the string-fragmentation model, we favor the “popcorn” model, rejecting the “diquark” model, where a diquark is considered to be a fundamental entity, at the 95% C.L.     

The Inertial Transformations and the Relativity Principle

Our recently proposed inertial transformations of the space and time variables based on absolute simultaneity imply the existence of a single isotropic inertial reference system (“privileged system”). We show, however, that aresynchronization of clocks in all inertial systems is possible leading to a different, arbitrarily chosen,isotropic “privileged” system. Such a resynchronization does not modify any one of the empirical consequences of the theory,which is thus compatible with a formulation of the relativity principle weaker than adopted in Einstein’s theory of special relativity.     

Single-photon wavefront-splitting interference

We present a new realization of the textbook experiment consisting in single-photon interference based on the pulsed, optically excited photoluminescence of a single colour centre in a diamond nanocrystal. Interferences are created by wavefront-splitting with a Fresnel’s biprism and observed by registering the “single-photon clicks” with an intensified CCD camera. This imaging detector provides also a real-time movie of the build-up of the single-photon fringes. We perform a second experiment with two detectors sensitive to photons that follow either one or the other interference path. Evidence for single photon behaviour is then obtained from the absence of time coincidence between detections in these two paths. Electronic supplementary material Online Material -- Movies showing the built-up of the interference pattern Gradual build-up of the interference pattern can be observed in the animated movies presented hereafter.