Nax/2Bi1−x/2MoxV1−xO4 and Bi1−x/3MoxV1−xO4 New Scheelite-related phases

New Scheelite-related solid solutions of the compositions Na_x/2Bi_1−x/2Mo_xV_1−xO₄ (0≤x≤1) and Bi_1−x/3 Mo_xV_1−xO₄(0≤x≤0.2) have been synthesised by the substitution of Na and Mo at the A and B sites respectively of the ABO₄ type ferroelastic BiVO₄. The phases were characterised using chemical analysis, powder X-ray diffraction, scanning electron microscopy, EDAX, and Raman spectroscopy. While almost a continuous solid solution is obtained for the series Na_x/2Bi_1−x/2Mo_xV_1−xO₄, the absence of Na at the A-site results only in a narrow stability region for the other series, Bi_1−x/3 Mo_xV_1−xO₄ where 0≤x≤0.2. Raman spectra of selected samples at room temperature also suggest that vanadium and molybdenum atoms are disordered at the tetrahedral sites.     

Oxygen diffusion and surface exchange in La1−xSrxFe0.8Cr0.2O3−δ (x=0.2, 0.4 and 0.6)

Oxygen tracer diffusion (D*) and surface exchange rate constant (k*) have been measured, using isotopic exchange and depth profiling by secondary ion mass spectrometry (SIMS), in La_1−xSr_xFe_0.8Cr_0.2O_3−δ (x=0.2, 0.4 and 0.6). Measurements were made as a function of temperature (700–1000 °C) and oxygen partial pressure (0.21–10⁻²¹ atm) in dry oxygen, water vapour and water vapour/hydrogen/nitrogen mixtures. At high oxygen activity, D* was found to increase with increasing temperature and Sr content. The activation energies for D* in air are 2.13 eV (x=0.2), 1.53 eV (x=0.4) and 1.21 eV (x=0.6). As the oxygen activity decreases, D* increases as expected qualitatively from the increase in oxygen vacancy concentration. Under strongly reducing conditions, the measured values of D* at 1000 °C range from 10⁻⁸ cm² s⁻¹ for x=0.2 to 10⁻⁷ cm² s⁻¹ for x=0.4 and 0.6. The activation energies determined at constant H₂O/H₂ ratio are 1.21 eV (x=0.2), 1.59 eV (x=0.4) and 0.82 eV (x=0.6).

The surface exchange rate constant of oxygen for the H₂O molecule is similar in magnitude to that for the O₂ molecule and both increase with increasing Sr concentration.     

Superconductivity and crystallographic properties of La2 − xMxCuO4 − δ (M = Na, K)

Superconductivity and crystallographic properties of La_{2 − x}M_xCuO_{4 − δ} (M = Na, K) are studied. In the La_{2 − x}M_xCuO_{4 − δ} system, superconductivity is detected for x 0.2. Oxygen content analysis shows that the system has more oxygen vacancies than the La_{2 − x}Sr_xCuO_{4 − δ} system. These oxygen vacancies may reduce the hole concentration, and high Na-doping is needed to produce superconductivity. In the La_{2 − x}K_xCuO_{4 − δ} system, superconductivity is observed for the first time. Resistivity and magnetic susceptibility measurements show that T_c(onset) is 40 K and the Meissner volume fraction is about 4% for x = 0.7. The system changes from orthorhombic to a tetragonal K₂NiF₄ structure at x ≈ 0.3 and only tetragonal samples show superconductivity.     

Trapping mechanism of superconductivity suppression induced by Pr substitution in the Ho1−xPrxBa2Cu3O7−δ system

Pr concentration dependence of the superconducting transition temperature T_c in the Ho_1−xPr_xBa₂Cu₃O_7−δ system is determined from measurements of DC electrical resistance. This dependence coincides with that for the parallely studied Y_1−xPr_xBa₂Cu₃O_7−δ reference system. Both systems have the same value of the critical concentration x_c=0.58, in accordance with nearly equal ionic radii of Ho³⁺ and Y³⁺ ions. It has been shown that the T_c(x) curve can be described with a single mechanism based on a decreasing number of sheet holes trapped by Pr^IV-ions, if one takes also into account that the number of these ions changes with x.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Oxygen tracer diffusion in La1 − xSrxCoO3

Tracer diffusion of ¹⁸O in dense, polycrystalline La_1−xSr_xCoO₃ for x = 0.1 has been measured in the temperature range 400 to 600 °C and at 500 °C for x = 0.2 at an oxygen partial pressure of 1 × 10⁵ Pa. Depth profiles were obtained by secondary ion mass spectrometry. The diffusion coefficient for La_0.9Sr_0.1CoO₃ is given by D = (17–247) exp[(−232 ± 8 kJ/mole)/RT] cm²/s. This value is several orders of magnitude lower than D extrapolated from the results for x = 0.2 measured in the 700–900 °C temperature range. One possible explanation for the discrepancy is that the two measurements reflect different diffusion paths. As expected, La_0.8Sr_0.2CoO₃ exhibits a higher diffusivity at 500 °C than does La_0.9Sr_0.1CoO₃.     

Phonon Raman scattering in Nd1+xBa2−xCu3O7−δ and Pr1+xBa2−xCu3O7−δ single crystals

The polarized Raman spectra of Nd_1+xBa_2−xCu₃O_7−δ (−0.023≤x≤0.107) and Pr_1+xBa_2−xCu₃O_7−δ (0.01≤x≤0.15) single crystals have been investigated. It was found that the Cu(2) A_g mode softens by 6 cm⁻¹ in Nd 1:2:3 and 4 cm⁻¹ in Pr 1:2:3 as x increases. These frequency shifts cannot be explained by the change in the relevant bond lengths due to Nd(Pr)-substitution for Ba. The variations with x of the two low frequency modes may be affected by change of their hybridization and/or change of their force constants. The linewidths of Ba mode in Pr 1:2:3 are broader than those in Y 1:2:3. This result suggests that the Pr substitution on Ba sites occurred even in a very small value of x. In x(yy) geometry the relative intensity of the Ba and O(4) modes in Nd 1:2:3 is greater than those in Pr 1:2:3. The difference between Nd 1:2:3 and Pr 1:2:3 in the relative intensity of the Ba and O(4) modes may be produced by the chains.     

Effect of Pr and Ca substitution on superconductivity in Y(1−x−yPrxCay)Ba2Cu3O7−δ

Pr substituted at constant Ca concentration for Y in (Y_1−x−yPr_xCa_y)Ba₂Cu₃O_7−δ superconductors have been prepared under identical conditions and the temperature dependence of the electrical resistivity of these samples are measured. The resistively determined values of T_c decrease linearly with increasing x (0 ≤ x ≤ 0.2) for constant y = 0.10 and 0.15 which provides convincing evidence that the suppression of superconductivity by Pr is mainly due to magnetic pair breaking. The suppression of superconductivity can also be correlated to the observed changes in oxygen content determined by iodometric analysis and to the average Cu-valences. However, it is found that the observed suppression of T_c cannot be compensated by appropriate hole doping with Ca.     

Properties of nonstoichiometric Pr0.6−xSr0.4MnO3 as the cathodes of SOFCs

A series of samples Pr_0.6−xSr_0.4MnO₃ (x=0, 0.01, 0.05, 0.1, 0.15, 0.2) were synthesized by a solid state reaction method. Pr deficiency at the A site has a great effect on the properties of Pr_0.6−xSr_0.4MnO₃ as the cathode of SOFCs (solid oxide fuel cells). Compared to the commonly used La_0.6Sr_0.4MnO₃ and La_0.55Sr_0.4MnO₃ cathode, Pr_0.6−xSr_0.4MnO₃ is better in the properties of conductivity, overpotential and impedance. In all the samples, the one with x=0.05, Pr_0.55Sr_0.4MnO₃, revealed the best performance in the measured temperature range.     

The relationship between crystal structure and electrical conductivity in the LaY1−xInxO3 (x=0.0–0.7) system

The electrical conductivity of the LaY_1−xIn_xO₃ (x=0.0–0.7) system has been studied from the viewpoint of crystal chemistry. The high temperature form of LaYO₃ (x=0.0) was ascertained to be the Sm₂O₃-type (B-type rare earth) structure, not perovskite-type one. The X-ray diffraction (XRD) experiments revealed that the samples with x=0.05 and 0.10 were the mixed phase of Sm₂O₃-type and perovskite-type structure, and changed to perovskite phase in the range of x0.20. From oxygen partial pressure dependence of the electrical conductivity, it was found that both the Sm₂O₃-type and the perovskite-type single phases showed hole conduction, but the mixed phase did oxide-ion one. The electrical conductivity of the LaY_1−xIn_xO₃ (x=0.0–0.7) system increased with increasing x, and showed the maximum value in the range of x=0.05–0.10, and then decreased with increasing x. The occurrence of oxide-ion conduction was discussed from the viewpoint of lattice distortion in the mixed phase.     

Origin of the metal-insulator transition in the superconducting series Bi2Sr2Ca1−xYxCu2O8+δ

The metal-insulator transition in the solid solution Bi₂Sr₂Ca_1−xY_xCu₂O_8+δ (0≤x≤1) has been investigated by TGA (oxygen content) and by X-ray absorption spectroscopy (Bi and Cu valence states). Resistivity and AC magnetic susceptibility measurements have shown that the superconducting properties and the metallic behavior vanish for x>0.55. The oxygen content δ is larger than x/2 for x≤0.3 and smaller than x/2 for x≥0.6. For x=0, the Cu K edge shows a shift towards high energy with respect to the Cu(II) oxide La₂CuO₄; this shift decreases with increasing x in agreement with the decrease of the doping hole density and the variations of the physical properties. For 0≤x≤0.3, the Bi L₃ edge shows a shift of 1 eV towards low energy with respect to the Bi(III) oxide Bi₂O₃ in agreement with the charge transfer between [CuO₂]_∞ and [BiO]_∞ planes. This shift also decreases with increasing x, but is still present for the x=0.6 composition for which δ is smaller than x/2. A model of the metal-insulator transition in this series is proposed based on the fact that the intercalation of excess oxygen raises the bottom of the Bi-O band with respect to the Fermi level and decreases the contribution of the Bi-O electron pocket to the hole density.     

Dielectric and ferroelectric properties of the mixed crystals system (CH3NH3)5Bi2(1 − x)Sb2xCl11

Dielectric and pyroelectric properties of the mixed crystals system, (CH₃NH₃)₅Bi_{2(1 − x)}Sb_2xCl₁₁ (0 < x < 0.25) were systematically investigated. Temperature dependencies of ′_c in the vicinity of ferro-paraelectric phase transition were measured for the mixed crystals with x = 0.05, 0.07, 0.11, 0.13 and 0.25 in the frequency region 1 kHz–1 MHz. The substitution of bismuth atoms by antimony drastically reduces the magnitude of ′_c and shifts the ferro-paraelectric phase transition towards higher temperatures. The dielectric dispersion of the complex electric permittivity, _c^*, in x = 0.05 crystals was studied in the frequency range from 30 to 1000 MHz. Around 321 K phase transition, two dielectric relaxators are postulated; a low-frequency one in the megahertz region showing a critical slowing down and a high-frequency one in the gigahertz region.     

Dielectric behavior of hexaferrites BaCo2−xZnxFe16O27

The dielectric constant (′) and dielectric loss (tan δ) for hexaferrites BaCo_2−xZn_xFe₁₆O₂₇ have been studied as a function of frequency (f), temperature (T) and composition (x). The experimental results indicate that ′ and tan δ above the relaxation frequency only decrease as the frequency increases and as the temperature decreases. Tan δ shows the dielectric relaxation at certain critical frequencies which rise as temperature increases. The activation energy for the dielectric relaxation (E_D), ′, and tan δ are found to be minimum for x = 0.8.     

Ca1−xYxMnO3 manganites: synthesis and ESR characterization

Ceramic samples of Ca_1−xY_xMnO₃ were synthesized by a liquid-mix method obtaining single phase materials, for 0.1x1, with orthorhombic structure. The cell volume increases with x indicating that changes in the Mn electronic state overcomes the progressive diminishing of the (Ca, Y) cationic radius, r_Ca>r_Y. We observed a continuous broadening of the electronic spin resonance line width with x. This is explained in terms of the increasing orthorhombic distortions. We have measured the DC magnetization for the x=1 compound YMnO₃. Our results are compatible with a G-type antiferromagnet with T_N=44 K.     

Effective Ru moment in RuSr2Eu2−xCexCu2O10 from high-temperature magnetic susceptibility

We have made high-temperature (250 K<T<800 K) DC susceptibility measurements in the compounds RuSr₂Eu_2−xCe_xCu₂O₁₀ for x=0.6,0.8, and 1.0 in order to determine the Ru effective magnetic moment. After carefully subtracting all contributions to the magnetic susceptibility except that of the Ru ions, we have been able to fit the Ru susceptibility with a law χ_Ru=χ₀+C_Ru/(T−Θ_Ru). We have found that the Ru effective moment falls between the values expected for Ru⁵⁺ in spin states and . We have also found a dependence of μ_eff(Ru) and Θ_Ru with the Ce content x.     

Crystal structure, electrical and magnetic properties of La1 − xSrxCoO3 − y

The crystal structure and properties of La_{1 − x}Sr_xCoO_{3 − y} with strontium contents ranging from x = 0.1 to x = 0.7 have been studied. The lattice parameters were measured as a function of temperature (4.2–400 K) and the crystal structure was found to change from rhombohedral (at low temperatures and values of x) to cubic. While LaCoO₃ is paramagnetic the oxides in the composition range 0.2 < x < 0.6 are soft ferromagnets. The strontium additions are compensated by the formation of Co⁴⁺ (cobalt ions with one positive effective charge, Co_Co^.) and oxygen vacancies (V_o^..). From the results it is concluded that the relative importance of oxygen vacancies increases with increasing temperature and decreasing oxygen activity. As a result the concentration of electronic charge carriers — and the resultant electrical conductivity — decrease with increasing temperature. The defect structure is discussed and it is concluded that defect associations — probably between oxygen vacancies and strontium ions — and formation of microdomains of perovskite-related phases are important aspects of the overall structure of these perovskite phases.     

Ionic conduction properties of layer-type oxides NaxMx/2Ti1−x/2O2 (M=Ni, Co; 0.60≤x≤1.0)

Layer-type oxide Na_xM_x/2^IITi_1−x/2^IVO₂ (M=Co, Ni; 0.60≤x≤1.0) has been prepared by solid state reactions. In both series, two structural variants of type -NaFeO₂ (O3) and β-RbScO₂ (P2) have been obtained consecutively as x decreases with a borderline composition around x_c0.7. With the decrease of x, the ionic conductivity has been found to increase up to 8.4×10⁻² S cm⁻¹ at 770 K (Na_0.67Co_0.33Ti_0.67O₂). Compositions of P2 have been found to exhibit the conductivity values two to five times greater than those of O3, primarily due to the larger rectangular threshold available for the diffusion of Na⁺ ions. Such a structural effect has also been considered to depend on the polarizability of alkali ion. HT-XRD and ²³Na-NMR data of Na_0.67Co_0.33Ti_0.67O₂ strongly suggest that the diffusion of Na⁺ ion is deeply related with the local distortion of trigonal prismatic sites, leading to the change of activation energy around 430 K.     

Thermodynamic analysis of BaxK1 − xBiO3 using the Eliashberg theory

In order to understand the mechanism that gives rise to superconductivity in the ceramic superconductors of the type Ba_xK_{1 − x}BiO₃, we analyze the thermodynamic properties with the use of the Eliashberg equations. For these calculations we used the electron-phonon spectral density function ²(ω)F(ω), calculated by Shirai et al. [1] from first principles for two different K concentrations, x=0.5 and x=0.7.     

Perovskite-like system (Sr,La)(Fe,Ga)O3−δ: structure and ionic transport under oxidizing conditions

The maximum solid solubility of gallium in the perovskite-type La_1−xSr_xFe_1−yGa_yO_3−δ (x=0.40–0.80; y=0–0.60) was found to vary in the approximate range y=0.25–0.45, decreasing when x increases. Crystal lattice of the perovskite phases, formed in atmospheric air, was studied by X-ray diffraction (XRD) and neutron diffraction and identified as cubic. Doping with Ga results in increasing unit cell volume, while the thermal expansion and total conductivity of (La,Sr)(Fe,Ga)O_3−δ in air decrease with gallium additions. The average thermal expansion coefficients (TECs) are in the range (11.7–16.0)×10⁻⁶ K⁻¹ at 300–800 K and (19.3–26.7)×10⁻⁶ K⁻¹ at 800–1100 K. At oxygen partial pressures close to atmospheric air, the oxygen permeation fluxes through La_1−xSr_xFe_1−yGa_yO_3−δ (x=0.7–0.8; y=0.2–0.4) membranes are determined by the bulk ambipolar conductivity; the limiting effect of the oxygen surface exchange was found negligible. Decreasing strontium and gallium concentrations leads to a greater role of the exchange processes. As for many other perovskite systems, the oxygen ionic conductivity of La_1−xSr_xFe_1−yGa_yO_3−δ increases with strontium content up to x=0.70 and decreases on further doping, probably due to association of oxygen vacancies. Incorporation of moderate amounts of gallium into the B sublattice results in increasing structural disorder, higher ionic conductivity at temperatures below 1170 K, and lower activation energy for the ionic transport.