Preparation, Thermal Behaviour, and Crystal Structure of MgAl2F8(H2O)2

 Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂.     

The Thermal Dehydration of Magnesium Aluminum Pentafluoride Dihydrate: Crystal Structures of MgAlF5(H2O)2 and MgAlF5

Summary.  Small plate-like single crystals of MgAlF₅(H₂O)₂ have been obtained during hydrothermal treatment (270°C) of microcrystalline material prepared by precipitation of stoichiometric solutions of Al₂(SO₄)₃ ·  18H₂O and Mg(NO₃)₂ · 6H₂O with diluted hydrofluoric acid. The crystal structure of MgAlF₅(H₂O)₂ has been refined from single crystal data (Imma (# 74), Z = 4, a = 7.0637(7), b = 10.1308(10), c = 6.7745(7) ?, 398 structure factors, 33 parameters, R(F² > σ(F ²)) = 0.0245, wR(F² all) = 0.0525). Main features of the inverse weberite type structure are infinite chains of trans-bridged [AlF₆] octahedra which are connected via common fluorine atoms by isolated [MgF₄(H₂O)₂] octahedra. MgAlF₅(H₂O)₂ dehydrates at temperatures above 300°C to give MgAlF₅. XRPD analysis of this phase has revealed isotypism with FeAlF₅. The crystal structure of MgAlF₅ (Immm (# 71), Z = 2, a = 7.268(1), b = 6.123(2), c = 3.543(1) ?) is built of infinite chains of edge-sharing [MgF₆] octahedra and chains of corner-sharing [AlF₆] octahedra along [001]. Upon further heating to temperatures above 500°C, MgAlF₅ decomposes to MgF₂ and α − AlF₃. Received January 15, 2001. Accepted February 12, 2001     

The Thermal Dehydration of Magnesium Aluminum Pentafluoride Dihydrate: Crystal Structures of MgAlF5(H2O)2 and MgAlF5

 Small plate-like single crystals of MgAlF₅(H₂O)₂ have been obtained during hydrothermal treatment (270°C) of microcrystalline material prepared by precipitation of stoichiometric solutions of Al₂(SO₄)₃ ·  18H₂O and Mg(NO₃)₂ · 6H₂O with diluted hydrofluoric acid. The crystal structure of MgAlF₅(H₂O)₂ has been refined from single crystal data (Imma (# 74), Z = 4, a = 7.0637(7), b = 10.1308(10), c = 6.7745(7) ?, 398 structure factors, 33 parameters, R(F² > σ(F ²)) = 0.0245, wR(F² all) = 0.0525). Main features of the inverse weberite type structure are infinite chains of trans-bridged [AlF₆] octahedra which are connected via common fluorine atoms by isolated [MgF₄(H₂O)₂] octahedra. MgAlF₅(H₂O)₂ dehydrates at temperatures above 300°C to give MgAlF₅. XRPD analysis of this phase has revealed isotypism with FeAlF₅. The crystal structure of MgAlF₅ (Immm (# 71), Z = 2, a = 7.268(1), b = 6.123(2), c = 3.543(1) ?) is built of infinite chains of edge-sharing [MgF₆] octahedra and chains of corner-sharing [AlF₆] octahedra along [001]. Upon further heating to temperatures above 500°C, MgAlF₅ decomposes to MgF₂ and α − AlF₃.     

Synthesis,Crystal Structure and Raman Spectrum of Hydrazinium(+2) Fluoroarsenate(III) Fluoride,N<Subscript>2</Subscript>H<Subscript>6</Subscript>AsF<Subscript>4</Subscript>F

Summary.  Hydrazinium(+2) fluoroarsenate(III) fluoride was prepared by the reaction of hydrazinium(+2) fluoride and liquid arsenic trifluoride. N₂H₆AsF₄F is stable at 273 K, but decomposes slowly at room temperature. N₂H₆AsF₄F crystallizes in the orthorhombic space group Pnn2 with a = 774.0(2) pm, b = 1629.2(4) pm and c = 436.6(1) pm; V = 0.5506(3) nm³, Z = 4 and d _c  = 2.461 g cm⁻³. The structure consists of N₂H₆ ²⁺ cations, AsF₄ ⁻ anions, and F⁻ anions and is interconnected by a hydrogen bonding network. Distorted trigonal-bipyramidal AsF₄ ⁻ units are very weakly interconnected and form chains along the b axis. Bands in the Raman spectrum are assigned to the vibrations of N₂H₆ ⁺² cations and AsF₄ ⁻ anions. Corresponding author. E-mail: adolf.jesih@ijs.si Received April 18, 2002; accepted July 15, 2002     

Hydrothermal synthesis and crystal structure of [Ni(Bptc)<Subscript>2</Subscript>(Bimb)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

In the compound [Ni(Bptc)₂(Bimb)₂(H₂O)₂] (I), where H₄Bptc is 3,3′,4,4′-biphenyltetracarboxylic acid; Bimb is 4,4′-bis(1-imidazolyl)biphenyl), Ni(II) has a distorted octahedral coordination geometry, which was bonded with two N atoms from two Bimb ligands, two O atoms from two H₂Bptc²⁻ ligands and two water O atoms. The crystal structure of compound I is stabilized by the π-π-stacking and hydrogen bonds interaction.     

Solvothermal Syntheses,Crystal Structures,and Properties of New [Mn(<Emphasis Type="BoldItalic">dien</Emphasis>)<Subscript>2</Subscript>]<Superscript>2+</Superscript> Complexes

Summary.  The two new compounds Mn(dien)₂[MoS₄] (1) and Mn(dien)₂[Mo₂O₂S₆] (2) (dien = diethylenetriamine) were prepared under solvothermal conditions. Both compounds were obtained as phase-pure products. The structures consist of new [Mn(dien)₂]²⁺ cations and isolated tetrahedral [MoS₄]²⁻ (1) or [Mo₂O₂S₆]²⁻ (2) anions. Between the anions and the cations, hydrogen bonding is observed. Compound 1 crystallizes in the tetragonal space group I (a = 10.219(2), c = 9.259(2) ?, Z = 2), whereas 2 crystallizes in the monoclinic space group P2₁/c (a = 8.703(2), b = 18.390(4), c = 14.603(3) ?, β = 103.18(3)°, Z = 4). The thermal behaviour of the thiomolybdates was investigated using difference thermoanalysis (DTA) and thermogravimetry (TG). Both compounds decompose under argon with a single endothermic signal in the DTA curve (peak maximum: 252 (1) and 242°C (2)). Received November 5, 2001. Accepted December 27, 2001     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Structure and lithium mobility of Li<Subscript>4</Subscript>Pt<Subscript>3</Subscript>Si

The lithium-rich silicide Li₄Pt₃Si was synthesised from the elements by high-temperature synthesis in a sealed niobium ampoule. Its structure was refined on the basis of single-crystal X-ray diffraction data: R32, a = 693.7(2), c = 1627.1(4) pm, wR2 = 0.0762, 525 F² values and 21 variables. The striking structural motifs of the Li₄Pt₃Si structure are silicon atoms with a slightly distorted trigonal prismatic platinum coordination with short Si–Pt distances (238–246 pm). Always two trigonal prisms are condensed via a common Pt₃ triangle, and these double units built up a three-dimensional network by condensation via common corners. The channels left by this prismatic network are filled by two crystallographically independent lithium sites in a 3:1 ratio. The single crystal X-ray data were fully confirmed by neutron powder diffraction and ⁷Li magic-angle spinning (MAS)–nuclear magnetic resonance (NMR) results. The two distinct lithium sites are well differentiated by their ⁷Li isotropic chemical shift and nuclear electric quadrupolar interaction parameters. MAS-NMR spectra reveal signal coalescence effects above 300 K, indicating chemical exchange between the lithium sites on the millisecond timescale. The spectra can be simulated with a simple two-site exchange model. From the resulting temperature-dependent correlation times, an activation energy of 50 kJ/mol is extracted.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Al,B, and F doped LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as cathode material of lithium-ion batteries

A series of the mixed transition metal compounds, Li[(Ni_1/3Co_1/3Mn_1/3)_1–x-y Al _x B _y ]O_2-z F _z (x = 0, 0.02, y = 0, 0.02, z = 0, 0.02), were synthesized via coprecipitation followed by a high-temperature heat-treatment. XRD patterns revealed that this material has a typical α-NaFeO₂ type layered structure with R3^- m space group. Rietveld refinement explained that cation mixing within the Li(Ni_1/3Co_1/3Mn_1/3)O₂ could be absolutely diminished by Al-doping. Al, B and F doped compounds showed both improved physical and electrochemical properties, high tap-density, and delivered a reversible capacity of 190 mAh/g with excellent capacity retention even when the electrodes were cycled between 3.0 and 4.7 V.     

Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Hydrothermal Syntheses and Crystal Structures of Two New Heteropolyoxovanadoborates Containing {(VO)<Subscript>12</Subscript>O<Subscript>6</Subscript>[B<Subscript>3</Subscript>O<Subscript>6</Subscript>(OH)]<Subscript>6</Subscript>(H<Subscript>2</Subscript>O)} Cluster

Two new heteropolyoxovanadoborates (H₂dap)₂H₆{(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}·13H₂O (1, dap = 1,2-diaminopropane) and {[Zn(dien)]₂[Zn(dien)(H₂O)]₄(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}₂·15H₂O (2, dien = diethylenetriamine) have been hydrothermally synthesized and structurally characterized. Both 1 and 2 contain {(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)} cluster (denoted on V₁₂B₁₈), which is constructed by a puckered B₁₈O₃₆(OH)₆ ring sandwiched between two triangles of six alternating cis and trans edge-sharing vanadium atoms, and a central water molecule. 1 consists of discrete [V₁₂B₁₈]¹⁰⁻ cluster anions with H₂dap²⁺ as counterions, while 2 consists of discrete neutral {[Zn(dien)]₂[Zn(dien)(H₂O)]₄[V₁₂B₁₈]} clusters, which are built from two types of zinc(II) complex fragments connecting with V₁₂B₁₈ cluster through two Zn-(μ ₃-O)-B bonds. Interestingly, 2 is the only example of the V₁₂B₁₈ cluster decorated by two types of zinc(II) complex fragments.     

Synthesis and characterization of the [Ru<Subscript>3</Subscript>O(CH<Subscript>3</Subscript>COO)<Subscript>6</Subscript>(py)<Subscript>2</Subscript>(BPE)Ru(bpy)<Subscript>2</Subscript>Cl](PF<Subscript>6</Subscript>)<Subscript>2</Subscript> dimer

The polymetallic [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl](PF₆)₂ complex (bpy = 2,2′-bipyridine, BPE = trans-1,2-bis(4-pyridil)ethylene and py = pyridine) was assembled by the combination of an electroactive [Ru₃O] moiety with a [Ru(bpy)₂(BPE)Cl] photoactive centre, and its structure was determined using positive ion electrospray (ESI-MS) and tandem mass (ESI-MS/MS) spectrometry. The [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl]²⁺ doubly charged ion of m/z 732 was mass-selected and subject to 15 eV collision-induced dissociation, leading to a specific dissociation pattern, diagnostic of the complex structure. The electronic spectra display broad bands at 409, 491 and 692 nm ascribed to the [Ru(bpy)₂(BPE)] charge-transfer bands and to the [Ru₃O] internal cluster transitions. The cyclic voltammetry shows five reversible waves at −1.07 V, 0.13 V, 1.17 V, 2.91 V and −1.29 V (vs SHE) assigned to the [Ru₃O]^{−1/0/+1/+2/+3} and to the bpy^0/−1 redox processes; also a wave is observed at 0.96 V, assigned to the Ru^+2/+3 pair. Despite the conjugated BPE bridge, the electrochemical and spectroelectrochemical results indicate only a weak coupling through the π-system, and preliminary photophysical essays showed the compound decomposes under visible light irradiation.     

Two Novel Er-Cr Ion-Pair Complexeswith Hydrogen Bonding Network: Syntheses, Crystal Structures, and Magnetic Properties

Summary.  Two novel Er-Cr ion-pair complexes ([Er(DMA)₃(H₂O)₄][Cr(CN)₆] and [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O; DMA = dimethylacetamide, MPL = 1-methyl-2-pyrrolidinone) have been synthesized. [Er(DMA)₃(H₂O)₄][Cr(CN)₆] crystallizes in the monoclinic system (space group P _c ) with a = 9.789(2), b = 11.263(2), c = 13.997(3)?, β = 105.66(3)°, V = 1485.9(5)?³, Z = 2; [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O crystallizes in the monoclinic system (space group P2₁) with a = 9.447(2), b = 13.881(3), c = 14.673(3)?, β = 101.85(3), V = 1883.1(7)?³, Z = 2. X-Ray crystal diffraction analyses reveal that the two complexes form a hydrogen bonding network structure through the CN group and H₂O molecules. Variable temperature susceptibilities for the two complexes indicate that weak antiferromagnetic interactions exist between cation and anion pairs through this hydrogen bonding network.     

Phase formation in the ZrO(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>-CsF-H<Subscript>2</Subscript>O system at low concentration of the phosphorus-containing component

The ZrO(NO₃)₂-H₃PO₄-CsF-H₂O system was studied at 20°C along the section at a molar ratio of PO₄³⁻/Zr = 0.5 (which is of the greatest interest in the context of phase formation) at ZrO₂ concentrations in the initial solutions of 2–14 wt % and molar ratios of CsF: Zr = 1−6. The following compounds were isolated for the first time: crystalline fluorophosphates CsZrF₂PO₄ · H₂O, amorphous oxofluorophosphate Cs₂Zr₃O₂F₄(PO₄)₂ · 3H₂O, and amorphous oxofluorophosphate nitrate CsZr₃O_1.25F₄(PO₄)₂(NO₃)_0.5 · 4.5H₂O. The compound Cs₃Zr₃O_1.5F₆(PO₄)₂ · 3H₂O was also isolated, which forms in a crystalline or glassy form, depending on conditions. The formation of the following new compounds was established: Cs₂Zr₃O_1.5F₅(PO₄)₂ · 2H₂O, Cs₂Zr₃F₂(PO₄)₄ · 4.5H₂O, and Zr₃O₄(PO₄)_1.33 · 6H₂O, which crystallize only in a mixture with known phases. All the compounds were studied by X-ray powder diffraction, crystal-optical, thermal, and IR spectroscopic analyses.     

Rare Earth-Rich Indides <Emphasis Type="Italic">RE</Emphasis><Subscript>5</Subscript>Pt<Subscript>2</Subscript>In<Subscript>4</Subscript> (<Emphasis Type="Italic">RE</Emphasis> = Sc,Y, La–Nd,Sm, Gd–Tm,Lu)

Summary. The isotypic indides RE ₅Pt₂In₄ (RE = Sc, Y, La–Nd, Sm, Gd–Tm, Lu) were synthesized by arc-melting of the elements and subsequent annealing. They were investigated via X-ray powder diffraction. Small single crystals of Gd₅Pt₂In₄ were grown via slow cooling and the structure was refined from X-ray single crystal diffractometer data: Pbam, a = 1819.2(9), b = 803.2(3), c = 367.6(2) pm, wR ² = 0.089, 893 F ² values and 36 parameters. The structure is an intergrowth variant of distorted trigonal and square prismatic slabs of compositions GdPt and GdIn. Together the platinum and indium atoms build up one-dimensional [Pt₂In₄] networks (292–333 pm Pt–In and 328–368 pm In–In) in an AA stacking sequence along the c axis. The gadolinium atoms fill distorted square and pentagonal prismatic cages between these networks with strong bonding to the platinum atoms.     

Novel large heteropolymetalate complexes formed from Ni(II) and cryptate [As<Subscript>4</Subscript>W<Subscript>40</Subscript>O<Subscript>140</Subscript><Superscript>28-</Superscript>

The heteropolytungstate (NH4)₂₀[Na2(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀] · 61H₂O is obtained by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀] · 60H₂O with NiCl₂ · 6H₂O and NH₄Cl in pH≈4.0. The structure and chemical composition are determined by X-ray diffraction analysis and element analysis. The crystal data and main structure refinement are: a = 1.33135(18) nm, b = 1.9722(3) nm, c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)δ, γ = 74.385(2)°, V = 8.978(2) nm³, triclinic crystal system, space group: P1, Z = 2, R1 = 0.0512, and wR2 = 0.0684(I >2σ). The four S2 sites of the big cyclic ligand [As₄W₄₀O₁₄₀]^28- are occupied by two Na⁺ and two Ni²⁺ respectively, and each site supplies four O_d coordinating to metal ion. The coordination number of Ni²⁺ is six, and that of two Na⁺ is five and six respectively. The third Ni²⁺ locates outside the cyclic [As₄W₄₀O₁₄₀]^28- and connects with one O_d, and its coordination number is six.     

Calorimetric investigations of luminescent films polycarbonate (PC) doped with europium complex [Eu(TTA)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

Polymers doped with rare earth complexes are advantaged in film production for many applications in the luminescent field. In this luminescent polycarbonate (PC) films doped with diaquatris(thenoyltrifluoroacetonate)europium(III) complex [Eu(TTA)₃(H₂O)₂] were prepared and their calorimetric and luminescent properties in the solid state are reported. The thermal behavior was investigated by utilization of differential scanning calorimetry (DSC) and thermogravimetry (TG). Due of the addition of rare earth [Eu(TTA)₃(H₂O)₂] into PC matrix, changes were observed in the thermal behavior concerning the glass transition and thermal stability. Characteristic broadened narrow bands arising from the ⁵D₀ → ⁷F_J transitions (J = 4−0) of Eu³⁺ ion indicate the incorporation of the Eu³⁺ ions in the polymer. The luminescent films show enhancement emission intensity with an increase of rare earth concentration in polymeric matrix accompanied by decrease in thermal stability.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.