Fabrication of DNA microarrays on nanoengineered polymeric ultrathin film prepared by self-assembly of polyelectrolyte multilayers

Microarray-based technology is in need of flexible and cost-effective chemistry for fabrication of oligonucleotide microarrays. We have developed a novel method for the fabrication of oligonucleotide microarrays with unmodified oligonucleotide probes on nanoengineered three-dimensional thin films that are deposited on glass slides by consecutive layer-to-layer adsorption of polyelectrolytes. Unmodified oligonucleotide probes were spotted and immobilized on these multilayered polyelectrolyte thin films (PET) by electrostatic adsorption and entrapment on the porous structure of the PET film. The PET provides higher probe binding capacity and thus higher hybridization signal than that of the traditional two-dimensional aminosilane and poly-L-lysine coated slides. Immobilized probe densities of 3.4 x 10(12)/cm2 were observed for microarray spots on PET with unmodified 50-mer oligonucleotide probes, which is comparable to the immobilized probe densities of alkyamine-modified 50-mer probes end-tethered on an aldehyde-functionalized slide. The study of hybridization efficiency showed that 90% of immobilized probes on PET film are accessible to target DNA to form duplex format in hybridization. The DNA microarray fabricated on PET film has wider dynamic range (about 3 orders of magnitude) and lower detection limit (0.5 nM) than the conventional amino- and aldehyde-functionalized slides. Oligonucleotide microarrays fabricated on these PET-coated slides also had consistent spot morphology. In addition, discrimination of single nucleotide polymorphism of 16S rRNA genes was achieved with the PET-based oligonucleotide microarrays. The PET microarrays constructed by our self-assembly process is cost-effective, versatile, and well suited for immobilizing many types of biological active molecules so that a wide variety of microarray formats can be developed.     

A novel approach for analysis of oligonucleotide-cisplatin interactions by continuous elution gel electrophoresis coupled to isotope dilution inductively coupled plasma mass spectrometry and matrix-assisted laser desorption/ionization mass spectrometry

In this work we present a novel approach for in vitro studies of cisplatin interactions with 8-mer oligonucleotides. The approach is based on the recently developed coupling of continuous elution gel electrophoresis (GE) to an inductively coupled plasma-sector field mass spectrometer (ICP-SFMS) with the aim of monitoring the interaction process between this cytostatic drug and the nucleotides. In contrast to existing methods, the electrophoretic separation conditions used here allow both the determination of the reaction kinetics in more detail as well as the observation of dominant intermediates. Two different nucleotides sequences have been investigated for comparison purposes, one containing two adjacent guanines (5'-TCCGGTCC-3') and one with a combination of thymine and guanine (5'-TCCTGTCC-3'), respectively. In order to gain further structural information, MALDI-TOF MS measurements have been performed after fraction collection. This allows for identification of the intermediates and the final products and confirms the stepwise coordination of cisplatin via monoadduct to bisadduct formation. Furthermore, the ICP-MS results were quantitatively evaluated in order to calculate the kinetics of the entire process.     

Direct selective detection of genomic DNA from coliform using a fiber optic biosensor

Fiber optic biosensors operated in a total internal reflection format were prepared based on covalent immobilization of 25mer lacZ single-stranded nucleic acid probe. Genomic DNA from Escherichia coli was extracted and then sheared by sonication to prepare fragments of approximately 300mer length. Other targets included a 25mer fully complementary lacZ sequence, 100mer polymerase chain reaction (PCR) products containing the lacZ sequence at various locations, and non-complementary DNA including genomic samples from salmon sperm. Non-selective adsorption of non-complementary oligonucleotides (ncDNA) was found to occur at a significantly faster rate than hybridization of complementary oligomers (cDNA) in all cases. The presence of ncDNA oligonucleotides did not inhibit selective interactions between immobilized DNA and cDNA in solution. The presence of high concentrations of non-complementary genomic DNA had little effect on extent or speed of hybridization of complementary oligonucleotides. Detection of genomic fragments containing the lacZ sequence was possible in as little as 20 s by observation of the steady-state fluorescence intensity increase or by time-dependent rate of fluorescence intensity changes.     

Hybridization and enzymatic extension of au nanoparticle-bound oligonucleotides

We have investigated the impact of steric effects on the hybridization and enzymatic extension of oligonucleotides bound to 12-nm colloidal Au particles. In these experiments, a nanoparticle-bound 12-mer sequence is hybridized either to its solution phase 12-mer complement or to an 88-mer template sequence. The particle-bound oligonucleotide serves as a primer for enzymatic extension reactions, in which covalent incorporation of nucleotides to form the complement of the template is achieved by the action of DNA polymerase. Primers were attached via-C(6)H(12)SH, -C(12)H(24)SH, and -TTACAATC(6)H(12)SH linkers attached at the 5' end. Primer coverage on the nanoparticles was varied by dilution with (5')HSC(6)H(12)AAA AAA(3'). Hybridization efficiencies were determined as a function of linker length, primer coverage, complement length (12-mer vs 88-mer), and primer:complement concentration ratio. In all cases, hybridization for the 88-mer was less efficient than for the 12-mer. Low primer surface coverage, greater particle-primer separation, and higher primer:complement ratios led to optimal hybridization. Hybridization efficiencies as high as 98% and 75% were observed for the 12-mer and 88-mer, respectively. Enzymatic extension of particle-bound primers was observed under all conditions tested; however, the efficiency of the reaction was strongly affected by linker length and primer coverage. Extension of primers attached by the longest linker was as efficient as the solution-phase reaction.     

Nucleic acid microarrays created in the double-spiral format on a circular microfluidic disk

A microfluidic microarray that is created in the double spiral format has produced a greater density of probes than in our previous report. Using this double-spiral format together with centrifugal pumping for liquid delivery, 384 x 384 hybridization assays have been performed on one circular disk at one time, at the intersections between the spiral channels and spiral probe lines. Each sample was introduced into each inlet reservoir leading to 4 spiral channels and was analyzed independently, and so the hybridization results were self-corrected among the 4 spiral channels. In this work, fast microarray hybridizations have been successfully achieved by using both complementary oligonucleotides as well as PCR products prepared from plant fungal pathogen cultures.     

Influences of non-selective interactions of nucleic acids on response rates of nucleic acid fiber optic biosensors

The immobilization of oligonucleotides to solid surfaces can provide a platform of chemistry that is suitable for the development of biosensor and microarray technologies. Experiments were performed using a fiber optic nucleic acid biosensor based on total internal reflection fluorescence to examine the effects of the presence of non-complementary DNA on the detection of hybridization of complementary target DNA. The work has focused on the rates and extent of hybridization in the presence and absence of non-selective adsorption using fluorescein-labeled DNA. A stop-flow system of 137 μL volume permitted rapid introduction and mixing of each sample. Response times measured were on the order of seconds to minutes. Non-selective adsorption of non-complementary oligonucleotides (ncDNA) was found to occur at a significantly faster rate than hybridization of complementary oligomers (cDNA) in all cases. The presence of ncDNA oligonucleotides did not inhibit selective interactions between immobilized DNA and cDNA in solution. The presence of high concentrations of non-complementary genomic DNA had little effect on the extent of hybridization of complementary oligonucleotides, but actually reduced the response times of sensors to cDNA oligonucleotides. Received: 26 September 2000 / Revised: 24 November 2000 / Accepted: 30 November 2000     

Hybridization of DNA at the surface of phospholipid monolayers. Effect of orientation of oligonucleotide chains

We studied the properties of lipid monolayers formed at the air-water interface composed of dioleoylphosphatidylcholine (DOPC) with incorporated short (19-mer) oligonucleotides. These oligonucleotides were modified by oleylamine at both (3' and 5') terminals or only at one (3') terminal. Interaction of single-stranded (19-mer) oligonucleotides without oleylamine with DOPC monolayers resulted only in slight increase of surface pressure and the area per phospholipid molecule, while more substantial and significant increase of these values were observed following incorporation of oligonucelotides modified by oleylamine. This influence is similar for both types of oligonucleotide modifications. However, considerable differences in changes of monolayer properties took place after hybridization with complementary oligonucleotides. The hybridization of oligonucleotides with the DNA modified by oleic acid at both 3' and 5' terminals at the surface of lipid monolayer resulted in further increase of surface pressure and in the increase of the area per phospholipid molecule, while decrease of both the surface pressure and the area per phospholipid molecules were observed for hybridization with DNA modified by oleic acid at 3' terminal. It is possible that in latter case, the hybridization caused the loss of hybridized molecules from monolayers. Interaction of noncomplementary chains with DOPC monolayers with incorporated oleyl acid-modified DNA also influenced the properties of monolayers, but the effect was weaker in comparison with that observed for complementary chains.     

Recirculating flow accelerates DNA microarray hybridization in a microfluidic device

A recirculating microfluidic device fabricated by laminating Mylar and glass was developed for the analysis of hybridization of oligonucleotides to DNA microarrays. The device is part of a system that provides controlled hybridization to DNA probes immobilized in a microarray of polyacrylamide gel pads using recirculation and temperature control. The system was used to obtain real-time kinetics of DNA hybridization and more accurate melting profiles of target-probe duplexes than possible using a static hybridization format. Recirculation shortened the time of perfect match target-probe hybridization from 6 hours to 2 hours and shifted the Td by 1.54 degrees C, relative to static conditions. The experimental results were consistent with a three-dimensional simulation of hybridization using a recirculating buffer system.     

Cationic polymer coatings for design of electroosmotic flow and control of DNA adsorption

A difficulty with the design and operation of an electrokinetically operated DNA hybridization microfluidic chip is the opposite direction of the electroosmotic flow and electrophoretic mobility of the oligonucleotides. This makes it difficult to simultaneously deliver targets and an appropriate hybridization buffer simultaneously to the probe sites. In this work we investigate the possibility of coating the inner walls of the microfluidic system with hexadimentrine bromide (polybrene, PB) and other cationic polymers in order to reverse the direction of electroosmotic flow so that it acts in the same direction as the electrophoretic transport of the oligonucleotides. The results indicated that the electroosmotic flow (EOF) in channels that were coated with the polymer could be reversed in 1× TBE buffer or 1× SSC buffer. Under these conditions, the DNA and EOF move in the same direction, and the flow can be used to deliver DNA to an area for selective hybridization within the channel. The effects of coating the surface of a nucleic acid microarray with polybrene were also studied to assess non-selective adsorption and stability. The polybrene coating significantly reduced the extent of non-selective adsorption of oligonucleotides in comparison to adsorption onto a glass surface, and the coating did not alter the extent of hybridization. The results suggest that use of the coating makes it possible to achieve semi-quantitative manipulation of nucleic acid oligomers for delivery to an integrated microarray or biosensor.     

A competitive displacement assay with quantum dots as fluorescence resonance energy transfer donors

The unique optoelectronic properties of semiconductor quantum dots (QDs) make them well-suited as fluorescent bioprobes for use in various biological applications. Modification of CdSe/ZnS QDs with biologically relevant molecules provides for multipotent probes that can be used for cellular labeling, bioassays, and localized optical interrogation by means of fluorescence resonance energy transfer (FRET). Herein, we demonstrate the use of red-emitting streptavidin-coated QDs (QD₆₀₅) as donors in FRET to introduce a competitive displacement-based assay for the detection of oligonucleotides. Various QD–DNA bioconjugates featuring 25-mer probe sequences diagnostic of Hsp23 were prepared. The single-stranded oligonucleotide probes were hybridized to dye-labeled (Alexa Fluor 647) reporter sequences, which were provided for a FRET-sensitized emission signal due to proximity of the QD and dye. The dye-labeled sequence was designed to be partially complementary and include base-pair mismatches to facilitate displacement by a more energetically favorable, fully complementary recognition motif embedded within a 98-mer displacer sequence. Overall, this study demonstrates proof-of-concept at the nM level for competitive displacement hybridization assays in vitro by reduction of fluorescence intensity that directly correlates to the presence of oligonucleotides of interest. This work demonstrates an analytical method that could potentially be implemented for monitoring of intracellular gene expression in the future.     

Oligonucleotide fingerprinting of plant and fungal genomes: a comparison of radioactive, colorigenic and chemiluminescent detection methods.

Digoxigenated oligonucleotide probes complementary to simple repetitive DNA sequences were introduced into nonradioactive fingerprint analysis of plant and fungal DNA. The fragment patterns, obtained by blot hybridization of TaqI-restricted DNA from chickpea (Cicer arietinum) and its fungal pathogen Ascochyta rabiei with digoxigenated probes and either a colorigenic or a chemiluminescent detection method, were compared to those obtained with 32P-labeled probes. In combination with alkaline phosphatase and its chemiluminescent substrate 3-(2'-spiroadamantane)-4-methoxy-4-(3"-phosphoryloxy)phenyl- 1,2-dioxetane (AMPPD) digoxigenated oligonucleotides yielded clear-cut fingerprints with high signal-to-background ratios within several minutes of exposure to X-ray films. The chemiluminescence reaction remained stable for at least two weeks. A comparison of banding patterns obtained by radioactive versus digoxigenin-based hybridization and detection techniques revealed substantial differences in the relative signal intensities of bands. Both nonradioactive techniques show a tendency to "equalize" band intensity differences. Whereas 32P-labeled oligonucleotides are also applicable to in situ hybridization with DNA immobilized in dried agarose gels, gel hybridization did not work efficiently with digoxigenated probes and either substrate.     

Introducing curcumin as an electrochemical DNA hybridization indicator and its application for detection of human interleukin-2 gene

In this paper, the application of curcumin (CU) as a non-toxic electrochemical DNA hybridization indicator was described. Hybridization investigations on a pencil graphite electrode surface as a transducer using oligonucleotides containing only one base type, including poly A, poly T, poly C, and poly G as probe and as related complementary/non-complementary sequences, showed that CU has no specific interaction with each of the oligonucleotides of DNA. Furthermore, results showed good interaction between CU and the hybridized form of oligonucleotides; thus, the extent of hybridization was evaluated based on the difference between differential pulse voltammetry (DPV) signals of CU accumulated on the probe-pencil graphite electrode (PGE) and CU accumulated on the probe-target-PGE. Then, the developed biosensor was successfully applied for the detection of short sequences of human interleukin-2 (hIL-2) gene as a model. A hybridization experiment with non-complementary oligonucleotide showed that the suggested DNA sensor responds selectively to the target. At optimized conditions, two linear ranges were obtained for hIL-2 gene, first from 50 to 1000 pM and second from 0.01 to 1 μM with a detection limit of 12 pM. 7.0) containing 20 mM NaCl.     

Matrix effect on the analysis of oligonucleotides by using a mass spectrometer with a sonic spray ionization source.

Matrix or impurities remaining in a DNA sample solution after various sample treatment procedures may influence a subsequent DNA analysis. In this work, several matrices were investigated concerning their effects on the analysis of oligonucleotide by using an ion-trap mass spectrometer equipped with a sonic spray ionization source. Inorganic salts of sodium chloride and magnesium chloride depressed the signal intensity by about 50% when the content of the salts was about 10 microM. dNTPs and Taq showed more severe depression on the oligonucleotide. However, Tris, or (hydroxymethyl)aminomethane, intensified the signal intensity, if its content was within an appropriate range. When the content of Tris was about 500 microM, the signal intensity was enhanced by factors of 3 and 5 for the 6-mer and the 20-mer oligonucleotides, respectively. With the existence of Tris, matrix effects from the inorganic salts, dNTPs and Taq were reduced.     

Electrochemical DNA biosensor for the detection of TT and Hepatitis B virus from PCR amplified real samples by using methylene blue

DNA biosensors based on nucleic acid hybridization processes are rapidly being developed towards the goal of rapid and inexpensive diagnosis of genetic and infectious diseases. Electrochemical transducers are often being used for detecting the DNA hybridization event, due to their high sensitivity, small dimensions, low cost, and compatibility with microfabrication technology. In this study, an electrochemical biosensor for the voltammetric detection of DNA sequences related to the Hepatitis B virus (HBV) and TT virus (TTV) from polymerase chain reaction (PCR) amplified real samples is described for the first time. The biosensor relies on the immobilization of the 21- or 24-mer single stranded oligonucleotides (probe) related to the HBV and TTV sequences and hybridization of these oligonucleotides with their complementary sequences (target) at carbon paste electrode (CPE). The extent of hybridization between the probe and target sequences was determined by using square wave voltammetry (SWV) with moving average baseline correction and methylene blue (MB) as the hybridization indicator. As a result of the interaction between MB and the bound guanine bases of hybrid at CPE surface, the MB signal decreased, when it was compared with the MB signal, which was observed with probe modified CPE. The difference between the MB signals, obtained from the hybrid modified and the probe modified CPE is used to detect the DNA sequences of the infectious diseases from PCR amplified real samples. Numerous factors affecting the target hybridization and indicator binding reactions are optimized to maximize the sensitivity.     

Chemically induced hairpin formation in DNA monolayers

A naphthyridine dimer that binds specifically to G-G mismatches has been used to induce hairpin formation in oligonucleotides immobilized onto chemically modified gold surfaces. Surface plasmon resonance (SPR) imaging measurements of DNA microarrays were used to demonstrate that binding of the naphthyridine dimer to G-G mismatches within the stem portion of an immobilized 42-mer oligonucleotide could be used to induce hairpin formation that prevented hybridization of DNA complementary to the loop sequence. In addition, the selectivity of the naphthyridine dimer for G-G mismatches was verified through SPR imaging measurements of the hybridization adsorption of an 11-mer oligonucleotide to a four-component DNA array of zero- and single-base mismatch sequences.     

Detection of short oligonucleotide sequences using an electrochemical DNA hybridization biosensor

An electrochemical DNA hybridization biosensor was developed for the detection of DNA hybridization using MDB and proflavine as electrochemical labels. The biosensor was based on the interaction of 7-dimethyl-amino-1,2-benzophenoxazi-nium Meldola’s Blue (MDB) and proflavine with double stranded DNA (dsDNA) The electrochemical behaviour of MDB and proflavine as well as its interaction with double stranded (dsDNA) were investigated by cyclic (CV) and square wave voltammetry (SWV) and screen printed electrodes (ScPE). Furthermore, DNA-hybridization biosensors were developed for the detection of hybridization between oligonucleotides, which was detected by studying changes in the voltammetric peaks of MDB (reduction peak at −0.251 V) and proflavine (reduction peak at 0.075 V). MDB and proflavine were found to intercalate between the base pairs of dsDNA and oligonucleotides. Several factors affecting the dsDNA or oligonucleotides immobilization, hybridization and indicator preconcentration and interaction time, were investigated. As a result of the interaction of MDB with dsDNA and hybridized oligonucleotides, the voltammetric signals of MDB increased. Furthermore, guanine’s oxidation peak (at 0.901 V) was decreased as MDB’s concentration was increased. As a result of the interaction of proflavine with dsDNA and hybridized oligonucleotides, the voltammetric signals of proflavine decreased. These results were similar for carbon paste and screen printed electrodes. A comparison of the performance between CPE and ScPE was done. Our results showed that lower concentrations of MDB and proflavine were detected using screen printed electrodes. Moreover, reproducibility was better using screen printed electrodes and the detection was faster (regarding the experimental steps), but they are more cost effective.      

Peculiarities of the DNA hybridization on the surface of bilayer lipid membranes

The method of electrostriction was applied to study the peculiarities of interaction of short oligonucleotides with free standing (BLM) and supported lipid membranes (sBLM) and of the duplex formation between complementary oligonucleotides on a membrane surface. The 15-mer single stranded DNA (pentadecathymidylate-(dT)(15)) was modified either with cholesterol (CH(dT)(15)) or by palmitoyl chain (C16(dT)(15)). The interaction of CH(dT)(15) with free standing BLM or with BLM formed on an agar or gold support was accompanied by sharp increase of elasticity modulus in direction perpendicular to the membrane plane ,E( perpendicular), and by increase of surface potential. In contrast, C16(dT)(15) did not induce substantial changes of elasticity modulus, however, the surface potential was changed in a similar manner as for CH(dT)(15). Hybridization of DNA following addition of complementary chain (dA)(15) has been accompanied by a small decrease of elasticity modulus and by a slight increase of surface potential. Both the incorporation of chemically modified oligonucleotides into the lipid bilayer as well as hybridization of DNA are not cooperative processes as has been demonstrated by analysis using Scatchard plot of corresponding values.