Dispersion behavior and thermal conductivity characteristics of Al2O3–H2O nanofluids

Nanofluid is a kind of new engineering material consisting of solid nanoparticles with sizes typically of 1–100 nm suspended in base fluids. In this study, Al₂O₃–H₂O nanofluids were synthesized, their dispersion behaviors and thermal conductivity in water were investigated under different pH values and different sodium dodecylbenzenesulfonate (SDBS) concentration. The sedimentation kinetics was determined by examining the absorbency of particle in solution. The zeta potential and particle size of the particles were measured and the Derjaguin–Landau–Verwey–Overbeek (DLVO) theory was used to calculate attractive and repulsive potentials. The thermal conductivity was measured by a hot disk thermal constants analyser. The results showed that the stability and thermal conductivity enhancements of Al₂O₃–H₂O nanofluids are highly dependent on pH values and different SDBS dispersant concentration of nano-suspensions, with an optimal pH value and SDBS concentration for the best dispersion behavior and the highest thermal conductivity. The absolute value of zeta potential and the absorbency of nano-Al₂O₃ suspensions with SDBS dispersant are higher at pH 8.0. The calculated DLVO interparticle interaction potentials verified the experimental results of the pH effect on the stability behavior. The Al₂O₃–H₂O nanofluids with an ounce of Al₂O₃ have noticeably higher thermal conductivity than the base fluid without nanoparticles, for Al₂O₃ nanoparticles at a weight fraction of 0.0015 (0.15 wt%), thermal conductivity was enhanced by up to 10.1%.     

Advanced oxidation of Reactive Blue 181 solution: A comparison between Fenton and Sono-Fenton Process

In this work, the decolorization of C.I. Reactive Blue 181 (RB181), an anthraquinone dye, by Ultrasound and Fe²⁺ H₂O₂ processes was investigated. The effects of operating parameters, such as Fe²⁺ dosage, H₂O₂ dosage, pH value, reaction time and temperature were examined. Process optimisation [pH, ferrous ion (Fe²⁺), hydrogen peroxide (H₂O₂), and reaction time], kinetic studies and their comparison were carried out for both of the processes. The Sono-Fenton process was performed by indirect sonication in an ultrasonic water bath, which was operated at a fixed 35-kHz frequency. The optimum conditions were determined as [Fe²⁺] = 30 mg/L, [H₂O₂] = 50 mg/L and pH = 3 for the Fenton process and [Fe²⁺] = 10 mg/L, [H₂O₂] = 40 mg/L and pH = 3 for the Sono-Fenton process. The colour removals were 88% and 93.5% by the Fenton and Sono-Fenton processes, respectively. The highest decolorization was achieved by the Sono-Fenton process because of the production of some oxidising agents as a result of sonication. The paper also discussed kinetic parameters. The decolorization kinetic of RB181 followed pseudo-second-order reaction (Fenton study) and Behnajady kinetics (Sono-Fenton study).     

Reprint of: Decomposition of PPCPs by ultrasound-assisted advanced Fenton reaction: A case study with salicylic acid

The study is about the degradation of a widely used pharmaceutical and personal care product-salicylic acid by sonocatalysis, and the experimental design of the reaction system. The first part of the study consists of sonication (572 kHz) in the presence of zero-valent iron (ZVI) with or without H₂O₂ to select and optimize the operational parameters as frequency, time, initial solute concentration, dose of reagents and pH. The second part consists of the use of response surface methodology and multiple regression to develop an experimental design modeland to assess the individual and interactive effects of pH, power (P_o), ZVI dose and H₂O₂. The results showed that the optimal conditions predicted by the model without defining any restrictions are: pH = 2.0, P_o = 120 W, ZVI = 24 mg L⁻¹, which provide total salicyclic acid and 48% TOC decay. However, the prediction implies intensive consumption of energy and reagents, and must therefore be modified by restricting the value of TOC decay to a lower value and that of pH to a higher one. Cross-validation tests showed that the prediction accuracy of the model was considerably high with 5.0–9.4% deviation from the experimental data.     

Synthesis of MnO2 nanoparticles from sonochemical reduction of MnO4− in water under different pH conditions

MnO₂ was synthesized by sonochemical reduction of MnO₄⁻ in water under Ar atmosphere at 20 °C, where the effects of solution pH on the reduction of MnO₄⁻ were investigated. The obtained XRD results showed that poor crystallinity δ-MnO₂ was formed at pH 2.2, 6.0 and 9.3. When solution pH was increased from 2.2 to 9.3, the morphologies of δ-MnO₂ changed from aggregated sheet-like or needle-like structures to spherical nanoparticles and finally to cubic or polyhedron nanoparticles. After further irradiation, MnO₂ was readily reduced to Mn²⁺. It was confirmed that H₂O₂ and H atoms formed in the sonolysis of water acted as reductants for both reduction for MnO₄⁻ to MnO₂ and MnO₂ to Mn²⁺. The optimum irradiation time for the effective synthesis of MnO₂ was 13 min at pH 2.2, 9 min at pH 6.0, 8 min at pH 9.3, respectively.     

Evaluation of Sr- and Mn-substituted LaAlO3 as potential SOFC anode materials

Lanthanum–aluminate-based oxides, (La_0.8Sr_0.2)_1−yAl_1−xMn_xO_3−δ (x = 0, 0.3, 0.5; y = 0 or 0.06) (LSAM), were synthesized and evaluated in detail as potential anode materials for solid oxide fuel cells (SOFCs). The electrical conductivity of LSAM (Mn ≥ 30 mol%) is dominated by p-type electronic conduction and can be treated as a diluted system of lanthanum manganites, (La,Sr)MnO₃. At 810 °C, the electrical conductivity of (La_0.8Sr_0.2)_0.94Al_0.5Mn_0.5O_3−δ (LSAM8255b) reaches 12 S/cm in air and 2.7 S/cm in humidified Ar/4% H₂ (p(O₂) ≈ 10^− 18 bar). The thermal expansion coefficients of LSAM8255a and LSAM8255b match YSZ very well and no chemical reaction was observed between these two perovskite materials and YSZ up to at least 1400 °C. Fairly good electrochemical performance was observed for an LSAM8255b–YSZ composite anode. At 850 °C, the polarization resistances are only 0.34 and 0.50 Ω cm² in wet (∼3% H₂O) Ar/20% H₂ and wet Ar/20% CH₄, respectively. In addition, an exposure to Ar/20% CH₄/3% H₂O for 35 h did not cause any apparent carbon deposition on the electrode. However, the chemical stability of LSAM8255a and LSAM8255b in a typical anode environment under open circuit conditions does not seem sufficient, leading to performance degradation with time in wet Ar/20% H₂ or wet Ar/20% CH₄. Furthermore, relatively large chemical expansion (0.3–0.5%) was observed when the atmosphere was switched from air to wet Ar/4% H₂, which might cause intolerable stress on the thin film electrolyte layer for a large-area anode-supported planar SOFC, but which might be tolerable for small geometries or electrolyte-supported SOFCs.     

Optimization of ultrasonication period for better dispersion and stability of TiO2–water nanofluid

Nanofluids are promising in many fields, including engineering and medicine. Stability deterioration may be a critical constraint for potential applications of nanofluids. Proper ultrasonication can improve the stability, and possibility of the safe use of nanofluids in different applications. In this study, stability properties of TiO₂–H₂O nanofluid for varying ultrasonication durations were tested. The nanofluids were prepared through two-step method; and electron microscopies, with particle size distribution and zeta potential analyses were conducted for the evaluation of their stability. Results showed the positive impact of ultrasonication on nanofluid dispersion properties up to some extent. Ultrasonication longer than 150 min resulted in re-agglomeration of nanoparticles. Therefore, ultrasonication for 150 min was the optimum period yielding highest stability. A regression analysis was also done in order to relate the average cluster size and ultrasonication time to zeta potential. It can be concluded that performing analytical imaging and colloidal property evaluation during and after the sample preparation leads to reliable insights.     

Production of pyrite nanoparticles using high energy planetary ball milling for sonocatalytic degradation of sulfasalazine

Sonocatalytic performance of pyrite nanoparticles was evaluated by the degradation of sulfasalazine (SSZ). Pyrite nanoparticles were produced via a high energy mechanical ball milling (MBM) in different processing time from 2 h to 6 h, in the constant milling speed of 320 rpm. X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FT-IR) analysis and Brunauer–Emmett–Teller (BET) confirmed the production of pyrite nanoparticles during 6 h of ball milling with the average size distribution of 20–80 nm. The effects of various operational parameters including pH value, catalyst amount (mg/L), SSZ concentration (mg/L), ultrasonic frequency (kHz) and reaction time on the SSZ removal efficiency were examined. The obtained results showed that the maximum removal efficiency of 97.00% was obtained at pH value of 4, catalyst dosage of 0.5 g/L, SSZ concentration of 10 mg/L and reaction time of 30 min. Experimental results demonstrated that the kinetic of the degradation process can be demonstrated using Langmuir–Hinshelwood (L-H) kinetic model. The effect of different inorganic ions such as Cl⁻, CO₃²⁻ and SO₄²⁻ was investigated on the L-H reaction rate (k_r) and adsorption (K_s) constants. Results showed that the presence of the mentioned ions significantly influenced the L-H constants. The impact of ethanol as a OH radical scavenger and some enhancers including H₂O₂ and K₂S₂O₈ was investigated on the SSZ removal efficiency. Accordingly, the presence of ethanol suppressed SSZ degradation due to the quenching of OH radicals and the addition of K₂S₂O₈ and H₂O₂ increased the SSZ removal efficiency, due to the formation of SO₄⁻ and additional OH radicals, respectively. Under the identical conditions of operating parameters, pyrite nanoparticles maintained their catalytic activity during four consecutive runs.     

Characteristic stability of bare Au-water nanofluids fabricated by pulsed laser ablation in liquids

Gold nanoparticles (Au-NPs) suspended in water where the suspension is a kind of nanofluid, were produced by pulsed laser ablation in liquids. Under the laser irradiation conditions up to 18 h, the average size of the Au-NPs ranged from 7.1 to 12.1 nm while their size-distribution tended to become narrower with effects of laser-induced fragmentation. Interestingly, the nanofluid showed an outstanding colloidal stability even after 1 month although no dispersants were used. The characteristic stability of bare Au-NPs suspension in water was found to be due to a large negative zeta potential of Au-NPs in water. The thermal conductivity of the Au-NPs (0.018 vol%)/water suspension increased by 9.3±5.4% compared to that of pure water.     

Sonochemical synthesis of Dy2(CO3)3 nanoparticles,Dy(OH)3 nanotubes and their conversion to Dy2O3 nanoparticles

Dysprosium carbonates nanoparticles were synthesized by the reaction of dysprosium acetate and NaHCO₃ by a sonochemical method. Dysprosium oxide nanoparticles with average size about 17 nm were prepared from calcination of Dy₂(CO₃)₃·1.7H₂O nanoparticles. Dy(OH)₃ nanotubes were synthesized by sonication of Dy(OAC)₃·6H₂O and N₂H₄. The as-synthesized nanostructures were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR). Photoluminescence measurement shows that the nanoparticles have two emission peaks around 17,540 cm^?1 and 20,700 cm^?1, which should come from the electron transition from ⁴F_9/2 → ⁶H_15/2 levels and ⁴F_9/2 → ⁶H_13/2 levels, respectively. The effect of calcination temperature and sonication time was investigated on the morphology and particle size of the products. The sizes could be controlled by the feeding rate of the precipitating agent (NaHCO₃ and N₂H₄) and slower feeding rate lead to smaller nanoparticles.     

Sonochemical fabrication of Fe3O4 nanoparticles on reduced graphene oxide for biosensors

This study synthesized Fe₃O₄ nanoparticles of 30–40 nm by a sonochemical method, and these particles were uniformly dispersed on the reduced graphene oxide sheets (Fe₃O₄/RGO). The superparamagnetic property of Fe₃O₄/RGO was evidenced from a saturated magnetization of 30 emu/g tested by a sample-vibrating magnetometer. Based on the testing results, we proposed a mechanism of ultrasonic waves to explain the formation and dispersion of Fe₃O₄ nanoparticles on RGO. A biosensor was fabricated by modifying a glassy carbon electrode with the combination of Fe₃O₄/RGO and hemoglobin. The biosensor showed an excellent electrocatalytic reduction toward H₂O₂ at a wide, linear range from 4 × 10^?6 to 1 × 10^?3 M (R² = 0.994) as examined by amperometry, and with a detection limit of 2 × 10^?6 M. The high performance of H₂O₂ detection is attributed to the synergistic effect of the combination of Fe₃O₄ nanoparticles and RGO, promoting the electron transfer between the peroxide and electrode surface.     

Preparation of monodisperse magnetite nanoparticles under mild conditions

In this paper, we reported a method to prepare monodisperse magnetite nanoparticles at mild temperature using cheap and non-toxic precursors. It overcomes the shortages of chemical co-precipitation method and thermal decomposition method and combines the advantages of facile, cheap, large-scale, monodisperse, nanosize, and low synthesis temperature and low toxic. In this method, FeCl₃ · 6H₂O, FeCl₂ · 4H₂O and sodium oleate were mixed in toluene/ethanol/water mixture solvent and refluxed at 74 °C to prepare magnetite nanoparticles directly. The nanoparticles were characterized by transmission electron microscopy, dynamic light scattering, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer and thermogravimetric analysis. The magnetic properties of nanoparticles were measured by superconducting quantum interference device. The results showed that the nanoparticles are well-monodisperse with about 4–5 nm of average diameter. The nanoparticles were proved to be superparamagnetic with saturated magnetization 23.6 emu/g and blocking temperature 24.4 K. A possible formation mechanism of monodisperse magnetite nanoparticles was presented at the same time.     

Homogeneous sonophotolysis of food processing industry wastewater: Study of synergistic effects,mineralization and toxicity removal

The mineralization of industrial wastewater coming from food industry using an emerging homogeneous sonophotolytic oxidation process was evaluated as an alternative to or a rapid pretreatment step for conventional anaerobic digestion with the aim of considerably reducing the total treatment time. At the selected operation conditions ([H₂O₂] = 11,750 ppm, pH = 8, amplitude = 50%, pulse length (cycles) = 1), 60% of TOC is removed after 60 min and 98% after 180 min when treating an industrial effluent with 2114 ppm of total organic carbon (TOC). This process removed completely the toxicity generated during storing or due to intermediate compounds.An important synergistic effect between sonolysis and photolysis (H₂O₂/UV) was observed. Thus the sonophotolysis (ultrasound/H₂O₂/UV) technique significantly increases TOC removal when compared with each individual process.Finally, a preliminary economical analysis confirms that the sono-photolysis with H₂O₂ and pretreated water is a profitable system when compared with the same process without using ultrasound waves and with no pretreatment.     

Improved synthesis of aluminium nanoparticles using ultrasound assisted approach and subsequent dispersion studies in di-octyl adipate

The present work reports on an efficient and simple one pot synthetic approach for aluminium nanoflakes and nanoparticles based on the intensification using ultrasound and provides a comparison with the conventional approach to establish the cutting edge process benefits. In situ passivation of aluminium particles with oleic acid was used as the method of synthesis in both the conventional and ultrasound assisted approaches. The aluminium nanoflakes prepared using the ultrasound assisted approach were subsequently dispersed in di-octyl adipate (DOA) and it was demonstrated that a stable dispersion of aluminium nanoflakes into di-octyl adipate (DOA) is achieved. The morphology of the synthesized material was established using the transmission electron microscopy (TEM) analysis and energy dispersive X-ray analysis (EDX) and the obtained results confirmed the metal state and nano size range of the obtained aluminium nanoflakes and particles. The stability of the aluminium nanoflakes obtained using ultrasound assisted approach and nanoparticles using conventional approach were characterized using the zeta potential analysis and the obtained values were in the range of −50 to +50 mV and −100 to +30 mV respectively. The obtained samples from both the approaches were also characterized using X-ray diffraction (XRD) and particle size analysis (PSA) to establish the crystallite size and particle distribution. It was observed that the particle size of the aluminium nanoflakes obtained using ultrasound assisted approach was in the range of 7–11 nm whereas the size of aluminium nanoparticles obtained using conventional approach was much higher in the range of 1000–3000 nm. Overall it was demonstrated that the aluminium nanoflakes obtained using the ultrasound assisted approach showed excellent morphological characteristics and dispersion stability in DOA showing promise for the high energy applications.     

Sonochemical synthesis,structural, magnetic and grain size dependent electrical properties of NdVO4 nanoparticles

NdVO₄ nanoparticles are successfully synthesized by efficient sonochemical method using two different structural directing agents like CTAB and P123. The phase formation and functional group analysis are carried out using X-ray diffraction (XRD) and fourier transform infra red (FT-IR) spectra, respectively. Using Scherrer equation the calculated grain sizes are 27 nm, 24 nm and 20 nm corresponding to NdVO₄ synthesized by without surfactant, with CTAB and P123, respectively. The TEM images revealed that the shape of NdVO₄ particles is rice-like and rod shaped particles while using CTAB and P123 as surfactants. The growth mechanism of NdVO₄ nanoparticles is elucidated with the aid of TEM analysis. From electrical analysis, the conductivity of NdVO₄ nanoparticles synthesized without surfactant showed a higher conductivity of 5.5703 × 10⁻⁶ S cm⁻¹. The conductivity of the material depends on grain size and increased with increase in grain size due to the grain size effect. The magnetic measurements indicated the paramagnetic behavior of NdVO₄ nanoparticles.     

Formation of nickel and nickel,zinc-bearing ferrite in aqueous suspension by air oxidation

Stoichiometric Ni-bearing ferrite was formed by air oxidation of an iron(II) hydroxide suspension at an initial Ni : Fe_tot mol ratio (r_Ni) of 0.20 : 2.80 at pH 10.0 and 65°C. Most of products formed at r_Ni=0.40 : 2.60 and 0.60 : 2.40 were Ni-bearing ferrites, of which vacancies of Fe³⁺ ion on the lattice points may be considered. Only Ni, Zn-bearing ferrites were formed in the suspensions at initial (Ni + Zn)  : Fe_tot mol ratios (r_{Ni + Zn}) of 0.20 : 2.80–0.60 : 2.40 at pH 10.0 and 65°C. At higher r_Ni or r_{Ni + Zn} by-products containing Ni, Fe and O₄²⁻ were formed. The formation of the by-products was depressed in the suspensions containing chloride ions in the place of sulfate ions.     

Magnetic properties of iron nanoparticles in a polymer film

We systematically synthesized self-aggregated iron nanoparticles in the perfluorinated sulfo-cation membrane (MF-4SK) by ion-exchange method. Our experimental results show that iron nanoparticles in MF-4SK exhibit superparamagnetic properties above the blocking temperature. Field-cooled and zero-field-cooled magnetization data show the blocking temperature, T_B≅120 K for the iron concentration of 5×10¹⁹ atoms per 1 g of polymer film at 500 Oe applied field. This result is well matched with the calculation based on the temperature dependence of the coercivity, which shows T_B≅110 K, with the zero temperature coercivity (H_C0) ≅ 420 Oe. The radius of the typical iron particle is determined to be ∼2 nm from transmission electron microscopy (TEM), showing good agreement with the value acquired by Langevin function fit. These experimental evidences suggest that iron nanoparticles in the polymer film obey a single-domain theory.     

Superior performance characteristics for the poly(2,5-dimethoxyaniline)–poly(styrene sulfonic acid)-based electrochromic device

We have fabricated an electrochromic (EC) device with poly(2,5-dimethoxyaniline), PDMA, entrapped in poly(styrene sulfonic acid) (PSS) as an electrochromic layer. The device showed improved performances like stability, optical contrast, etc., over the device with a PDMA layer doped by H₂SO₄. In the process of fabrication of the EC device with a sandwich configuration, indium tin oxide (ITO)/PDMA–PSS||poly(ethyleneimine) (PEI)/orthophosphoric acid (H₃PO₄)/WO₃/ITO, electrochemical polymerization of 2,5-dimethoxyaniline (DMA) was performed with PSS as electrolyte and ITO coated glass as working electrode. The performance characteristics of EC device, like optical contrast, stability, switching time, etc., were followed by cyclic voltammetry, double potential step chronoamperometry and in-situ spectroelectrochemistry. The device was operated in between − 1 V and + 1 V, and absorption characteristics were followed by in-situ UV–visible spectroscopy. A visible contrast in color upon switching the potential from − 1 V to + 1 V was noticed for the device. The device was pale yellow at − 1 V and dark green at + 1 V. Incorporation of PSS into PDMA resulted enhancement in the performance of the complementary electrochromic device. The optical contrast of the device was improved by incorporating PSS into PDMA matrix. The device retained nearly 50% of their optical contrast after 10,000 double steps informing the superior performance of PDMA–PSS in the EC device.     

Study of size dependent photoluminescence properties of copper doped sodium hexametaphosphate capped ZnS nanoparticles

Copper doped ZnS nanoparticles stabilized by sodium hexametaphosphate (SHMP) have been prepared via the wet chemical method using thiourea and sodium sulphide as chalcogenide sources. The XRD pattern showed that ZnS nanoparticles had zinc blende structure and line broadening suggests the formation of an amorphous compound. Absorption measurements were done for three different concentrations of dopant concentrations. The PL spectrum for the sample synthesized using Na₂S·9H₂O showed a sharp emission peak around 510 nm with full width at half maximum (FWHM)<10 nm. The role of the capping agent and sulphide source on optical properties of as synthesized nanoparticles by steady-state photoluminescence (PL) spectroscopy has been studied.     

Electric property of mixed conductor BaIn1−xCoxO3−δ

We synthesized BaIn_1−xCo_xO_3−δ (x = 0–0.8) with a defective perovskite structure by partly replacing In with Co in Ba₂In₂O₅. Based on XRD measurements, the synthesized compound was found to have cubic perovskite and orthorhombic brownmillerite structures depending on the amount of Co. BaIn_1−xCo_xO_3−δ (x = 0.2 and 0.3) showed high total electrical conductivities without undergoing the structural transformation that the original Ba₂In₂O₅ undergoes. Some of the samples showed both electronic and oxide ionic conductivities. At the same time, the oxide ionic conductivity was comparable with that of Ba₂In₂O₅. For example, the sample with x = 0.1 had a total electrical conductivity of 4.7 × 10^− 1 S cm^− 1 and an oxide ion transport number of 0.52 at 850 °C.     

Sonochemical fabrication of gold nanoparticles–boron nitride sheets nanocomposites for enzymeless hydrogen peroxide detection

A simple sonochemical route was developed for the preparation of gold nanoparticles/boron nitride sheets (AuNPs/BNS) nanocomposites without using reducing or stabilizing agents. Transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and UV–vis absorption spectra were used to characterize the structure and morphology of the nanocomposites. The experimental results showed that AuNPs with approximately 20 nm were uniformly attached onto the BNS surface. It was found that the AuNPs/BNS nanocomposites exhibited good catalytic activity for the reduction of H₂O₂. The modified electrochemical sensor showed a linear range from 0.04 to 50 mM with a detection limit of 8.3 μM at a signal-to-noise ratio of 3. The findings provide a low-cost approach to the production of stable aqueous dispersions of nanoparticles/BNS nanocomposites.