Cadmium sulfide quantum dots stabilized by castor oil and ricinoleic acid

Castor oil and ricinoleic acid (an isolate of castor oil) are environmentally friendly bio-based organic surfactants that have been used as capping agents to prepare nearly spherical cadmium sulfide quantum dots (QDs) at 230, 250 and 280 °C. The prepared quantum dots were characterized by Ultra violet–visible (UV–vis), Photoluminescence (PL), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM) and X-ray diffraction (XRD) giving an overall CdS QDs average size of 5.14±0.39 nm. The broad XRD pattern and crystal lattice fringes in the HRTEM images showed a hexagonal phase composition of the CdS QDs. The calculated/estimated average size of the prepared castor oil capped CdS QDs for various techniques were 4.64 nm (TEM), 4.65 nm (EMA), 5.35 nm (UV–vis) and 6.46 nm (XRD). For ricinoleic acid capped CdS QDs, the average sizes were 5.56 nm (TEM), 4.78 nm (EMA), 5.52 nm (UV–vis) and 8.21 nm (XRD). Optical properties of CdS QDs showed a change of band gap energy from its bulk band gap of 2.42–2.82 eV due to quantum size confinement effect for temperature range of 230–280 °C. Similarly, a blue shift was observed in the photoluminescence spectra. Scanning electron microscope (SEM) observations show that the as-synthesized CdS QDs structures are spherical in shape. Fourier transform infra-red (FTIR) studies confirms the formation of castor oil and ricinoleic acid capped CdS QDs.     

Photocatalytic degradation of ciprofloxacin drug in water using ZnO nanoparticles

We report the synthesis of nanostructure ZnO semiconductor with ～2.1 nm diameter using a chemical precipitation method. The resulting nanoparticles were characterized by X-ray diffraction analysis (XRD), Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The optical properties were investigated by UV–vis and fluorescence techniques. The absorption spectra exhibit a sharp absorption edge at ～334 nm corresponding to band gap of ～3.7 eV. The fluorescence spectra displayed a near-band-edge ultraviolet excitonic emission at ～410 nm and a green emission peak at ～525 nm, due to a transition of a photo-generated electron from the conduction band to a deeply trapped hole. The photocatalytic activity of the prepared ZnO nanoparticles has been investigated for the degradation of ciprofloxacin drug under UV light irradiation in aqueous solutions of different pH values. The results showed that the photocatalytic degradation process is effective at pH 7 and 10, but it is rather slow at pH 4. Higher degradation efficiency (～50%) of the drug was observed at pH 10 after 60 min. Photodegradation of the drug follows a pseudo-first-order kinetics.     

Synthesis and characterization of monodisperse copper nanoparticles using gum acacia

A simple method was put forward in this paper for preparing colloidal copper nanoparticles in aqueous solutions using copper sulfate, gum acacia and hydrazine hydrate as copper precursor, capping agents and reducing agents, respectively, without any inert gas. The formation of nanosized copper was confirmed by its characteristic surface plasmon absorption peak at 604 nm in UV–vis spectra. The transmission electron microscopic (TEM) and scanning electron microscope (SEM) images show that the as-synthesized copper fine spherical particles are distributed uniformly with a narrow distribution from 3 nm to 9 nm. The X-ray diffraction (XRD) and high resolution transmission electron microscopic (HRTEM) demonstrated that the obtained metallic nanoparticles are single crystalline copper nanoparticles. Fourier transform infra-red (FT-IR) spectroscopic data suggested that the copper nanoparticles are coated with gum acacia. The effects of the quantity of gum acacia on the particle size were investigated by the UV–vis spectra and TEM images. The growth process of the nanoparticles was monitored by the UV–vis spectra. The mechanism of the formation copper nanoparticles was discussed. The process raised in this study can be served as an excellent candidate for the preparation of copper nanoparticles in a large scale production.     

Effects of morphology on photocatalytic performance of Zinc oxide nanostructures synthesized by rapid microwave irradiation methods

In this study, two different chemical solution methods were used to synthesize Zinc oxide nanostructures via a simple and fast microwave assisted method. Afterwards, the photocatalytic performances of the produced ZnO powders were investigated using methylene blue (MB) photodegradation with UV lamp irradiation. The obtained ZnO nanostructures showed spherical and flower-like morphologies. The average crystallite size of the flower-like and spherical nanostructures were determined to be about 55 nm and 28 nm, respectively. X-ray diffraction (XRD), scanning electronic microscopy (SEM), Brunauer–Emmett–Teller (BET), room temperature photoluminescence (RT-PL) and UV–vis analysis were used for characterization of the synthesized ZnO powders. Using BET N₂-adsorption technique, the specific surface area of the flower-like and spherical ZnO nanostructures were found to be 22.9 m²/gr and 98 m²/gr, respectively. Both morphologies show similar band gap values. Finally, our results depict that the efficiency of photocatalytic performance in the Zinc oxide nanostructures with spherical morphology is greater than that found in the flower-like Zinc oxide nanostructures as well as bulk ZnO.     

Fabrication of Fe-doped TiO2 nanoparticles and investigation of photocatalytic decolorization of reactive red 198 under visible light irradiation

In this research, Fe-doped TiO₂ nanoparticles with various Fe concentrations (0. 0.1, 1, 5 and 10 wt%) were prepared by a sol–gel method. Then, nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray analysis (EDX), BET surface area, photoluminescence (PL) spectroscopy and UV–vis diffuse reflectance spectroscopy (DRS). The photocatalytic activity of the nano-particles was evaluated through degradation of reactive red 198 (RR 198) under UV and visible light irradiations. XRD results revealed that all samples contained only anatase phase. DRS showed that the Fe doping in the titania induced a significant red shift of the absorption edge and then the band gap energy decreased from 3 to 2.1 eV. Photocatalytic results indicated that TiO₂ had a highest photocatalytic decolorization of the RR 198 under UV irradiation whereas photocatalytic decolorization of the RR 198 under visible irradiation increased in the presence of Fe-doped TiO₂ nanoparticles. Among the samples, Fe-1 wt% doped TiO₂ nanoparticles showed the highest photocatalytic decolorization of RR198 under visible light irradiation.     

Effect of calcination temperature on phase transformation,structural and optical properties of sol–gel derived ZrO2 nanostructures

Zirconia (ZrO₂) nanostructures of various sizes have been synthesized using sol–gel method followed by calcination of the samples from 500 to 700 °C. The calcined ZrO₂ powder samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infra-red spectroscopy (FT-IR), UV–visible spectroscopy (UV–vis.), Raman spectroscopy (RS) and thermogravimetric analysis (TGA). The phase transformation from tetragonal (t) to monoclinic (m) was observed. The average diameter of the ZrO₂ nanostructures calcined at 500, 600 and 700 °C was calculated to be 8, 17 and 10 nm, respectively. The ZrO₂ sample calcined at 500 °C with tetragonal phase shows a direct optical band gap of 5.1 eV. The value of optical band gap is decreased to 4.3 eV for the ZrO₂ calcined at 600 °C, which contains both tetragonal (73%) and monoclinic (27%) phases. On further calcination at 700 °C, where the ZrO₂ nanostructures have 36% tetragonal and 64% monoclinic phases, the optical band gap is calculated to be 4.8 eV. The enhancement in optical band gap for ZrO₂ calcined at 700 °C may be due to the rod like shape of ZrO₂ nanostructures. The tetragonal to monoclinic phase transformation was also confirmed by analyzing Raman spectroscopic data. The TG analysis revealed that the ZrO₂ nanostructure with dominance of monoclinic phase is found to be more stable over the tetragonal phase. In order to confirm the phase stability of the two phases of ZrO₂, single point energy is calculated corresponding to its monoclinic and tetragonal structures using density functional theory (DFT) calculations. The results obtained by theoretical calculations are in good agreement with the experimental findings.     

A facile hydrothermal route to synthesize novel PbI2 nanorods

We report the synthesis of PbI₂ nanorods by reacting lead acetate with elemental iodine at room temperature by virtue of a wet chemical method at mild reactions. The diameters of the obtained PbI₂ nanorods are about 54 nm. The present technique may open a new doorway to one-dimensional nanosized rods from the same kind of materials with irregular shape or large size. X-ray powder diffraction (XRD), Fourier transform infrared analysis (FTIR), ultraviolet–visible–near infrared analysis (UV–vis–NIR), photoluminescence measurements (PL) and scanning electron microscopy (SEM) were used to characterize PbI₂ nanorods. The as obtained products were analyzed by X-ray powder diffraction, which confirms the formation of solid PbI₂ nanorods. From the UV–vis–NIR studies the band gap of PbI₂ nanorod was estimated. The various functional groups present in the PbI₂ nanorods were identified by FTIR analysis. Intense photoluminescence was also observed with some spectral tuning possibly giving a range of emission photon energies approximately spanning from 2.1 to 3.5 eV.     

Synthesis and characterization of sulfur-containing polyacetylene derivative: Synthesis of poly(phenyl propargyl sulfide) and its electro-optical properties

Sulfur-containing conjugated polymer was synthesized by the polymerization of phenyl propargyl sulfide by transition metal catalysts such as PdCl₂, RuCl₃, (NBD)PdCl₂, WCl₆, and MoCl₅. The polymerization proceeded well in homogeneous manner to give a moderate yield of polymer. The chemical structure of poly(phenyl propargyl sulfide) was characterized by NMR (¹H–, ¹³C–), IR, and UV–visible spectroscopy, and elemental analysis to have the conjugated polymer backbone with the designed moieties. The FT-IR spectra of the polymer did not show the acetylenic CC bond stretching (2119 cm⁻¹) and acetylenic C–H bond stretching (3293 cm⁻¹) frequencies of the monomer. The thin polymer film exhibited reversible electrochemical behaviors between the doping and undoping peaks. Poly(phenyl propargyl sulfide) showed the characteristic UV–visible absorption band at 360 nm and blue PL spectrum at 460 nm, corresponding to the photon energy of 2.70 eV. The energy band gap of poly(PPS) was estimated to be 2.77 eV from the analysis of the absorption edge.     

Microwave synthesis of nitrogen doped Ti4O7 for photocatalytic applications

The nitrogen (N) doped Ti₄O₇ photocatalyst was prepared from urea as a nitrogen source by a microwave method. The resulting photocatalyst was characterized by X-ray diffraction (XRD), Field Emission Scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS) and UV–vis spectroscopy (UV–Vis). 0.1 M N doped Ti₄O₇ photocatalyst exhibited methylene blue decomposition efficiency of 100% which was prepared by microwave treatment for above 30 min. Rate constant was found to be 0.028910 min⁻¹ in the first order kinetic.     

Template-free sonochemical synthesis of hierarchically porous NiO microsphere

A novel template-free sonochemical synthesis technique was used to prepare NiO microspheres combined with calcination of NiO_2.45C_0.74N_0.25H_2.90 precursor at 500 °C. The NiO microspheres samples were systematically investigated by the thermograviometric/differential scanning calorimetry (TG/DSC), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier-transformed infrared spectroscopy (FT-IR), Brunnauer–Emmett–Teller (BET) nitrogen adsorption–desorption isotherms, laser particle size analyzer, and ultraviolet–visible spectroscopy (UV–Vis). The morphology of the precursor was retained even after the calcination process, and exhibited hierarchically porous sphericity. The morphology changed over the ultrasonic radiation time, and the shortest reaction time was 70 min, which was much less than 4 h for the mechanical stirring process. The mechanical stirring was difficult to form the complete hierarchically porous microsphere structure. The BET specific surface area and the median diameter of the hierarchically porous NiO microspheres were 103.20 m²/g and 3.436 μm, respectively. The synthesized NiO microspheres were mesoporous materials with a high fraction of macropores. The pores were resulted from the intergranular accumulation. The ultraviolet absorption spectrum showed a broad emission at the center of 475 nm, and the band gap energy was estimated to be 3.63 eV.     

Structural evolution,growth mechanism and photoluminescence properties of CuWO4 nanocrystals

Copper tungstate (CuWO₄) crystals were synthesized by the sonochemistry (SC) method, and then, heat treated in a conventional furnace at different temperatures for 1 h. The structural evolution, growth mechanism and photoluminescence (PL) properties of these crystals were thoroughly investigated. X-ray diffraction patterns, micro-Raman spectra and Fourier transformed infrared spectra indicated that crystals heat treated and 100 °C and 200 °C have water molecules in their lattice (copper tungstate dihydrate (CuWO₄·2H₂O) with monoclinic structure), when the crystals are calcinated at 300 °C have the presence of two phase (CuWO₄·2H₂O and CuWO₄), while the others heat treated at 400 °C and 500 °C have a single CuWO₄ triclinic structure. Field emission scanning electron microscopy revealed a change in the morphological features of these crystals with the increase of the heat treatment temperature. Transmission electron microscopy (TEM), high resolution-TEM images and selected area electron diffraction were employed to examine the shape, size and structure of these crystals. Ultraviolet–Visible spectra evidenced a decrease of band gap values with the increase of the temperature, which were correlated with the reduction of intermediary energy levels within the band gap. The intense photoluminescence (PL) emission was detected for the sample heat treat at 300 °C for 1 h, which have a mixture of CuWO₄·2H₂O and CuWO₄ phases. Therefore, there is a synergic effect between the intermediary energy levels arising from these two phases during the electronic transitions responsible for PL emissions.     

Magneto-optical properties of α-Fe2O3@ZnO nanocomposites prepared by the high energy ball-milling technique

Magnetic–fluorescent nanocomposites (NCs) with 10 wt% of α-Fe₂O₃ in ZnO have been prepared by the high energy ball-milling. The crystallite sizes of α-Fe₂O₃ and ZnO in the NCs are found to vary from 65 nm to 20 nm and 47 nm to 15 nm respectively as milling time is increased from 2 to 30 h. XRD analysis confirms presence of α-Fe₂O₃ and ZnO in pure form in all the NCs. UV–vis study of the NCs shows a continuous blue-shift of the absorption peak and a steady increase of band gap of ZnO with increasing milling duration that are assigned to decreasing particle size of ZnO in the NCs. Photoluminescence (PL) spectra of the NCs reveal three weak emission bands in the visible region at 421, 445 and 485 nm along with the strong near band edge emission at 391 nm. These weak emission bands are attributed to different defect – related energy levels e.g. Zn-vacancy, Zn interstitial and oxygen vacancy. Dc and ac magnetization measurements show presence of weakly interacting superparamagnetic (SPM) α-Fe₂O₃ particles in the NCs. ⁵⁷Fe-Mössbauer study confirms presence of SPM hematite in the sample milled for 30 h. Positron annihilation lifetime measurements indicate presence of cation vacancies in ZnO nanostructures confirming results of PL studies.     

Temperature dependent structural and optical properties of tin oxide nanoparticles

Nanocrystalline tin oxide (SnO₂) powders were synthesized through wet chemical route using tin metal as precursor. The morphology and optical properties, as well as the effect of sintering on the structural attributes of SnO₂ particles were analyzed using Transmission electron microscopy (TEM), UV–visible spectrophotometry (UV–vis) and X-ray diffraction (XRD), respectively. The data revealed that the lattice strain plays a significant role in determining the structural properties of sintered nanoparticles. The particle size was found to be 5.8 nm, 19.1 nm and 21.7 nm for samples sintered at 300 °C, 500 °C, and 700 °C, respectively. Also, the band gaps were substantially reduced from 4.1 eV to 3.8 eV with increasing sintering temperatures. The results elucidated that the structural and optical properties of the SnO₂ nanoparticles can be easily modulated by altering sintering temperature during de novo synthesis.     

A facile thermal evaporation route for large-area synthesis of tin oxide nanowires: Characterizations and their use for liquid petroleum gas sensor

In this paper, a very simple procedure was presented for the reproducible synthesis of large-area SnO₂ nanowires (NWs) on a silicon substrate by evaporating Sn powders at temperatures of 700, 750, and 800 °C. As-obtained SnO₂ NWs were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. They revealed that the morphology of the NWs is affected by growth temperature and the SnO₂ NWs are single-crystalline tetragonal. The band gap of the NWs is in the range of 4.2–4.3 eV as determined from UV/visible absorption. The NWs show stable photoluminescence with an emission peak centered at around 620 nm at room-temperature. The sensors fabricated from the SnO₂ NWs synthesized at 700 °C exhibited good response to LPG (liquefied petroleum gas) at an operating temperature of 400 °C.     

Compositional modification of Se-Ge-Sb chalcogenide glasses by addition of arsenic element

The modification of structural, thermal and optical properties of Se-Ge-Sb glasses by addition of arsenic element was the goal of this study. In this regards, six different glasses of Se₆₀Ge_40-xSb₅As_x (0 ≤ x ≤ 15) were prepared by conventional melt quenching technique in quartz ampoule. The produced samples were characterized using X-ray diffraction (XRD), differential scanning calorimetry (DSC), UV–Vis–NIR spectrophotometer, Fourier transform infrared (FTIR) and Raman spectroscopy. The fundamental absorption edge for of the glasses was analyzed in terms of the theory proposed by Davis and Mott. Based on the obtained results, the glass transition temperature, optical energy gap and Urbach energy of prepared glasses in this alloying system were in the range of 325–380 °C, 1.43–1.64 eV and 0.03–0.3547 eV, respectively. The as prepared glasses show anomalous behavior at 5–7.5 mole% of arsenic for the glass transition temperature, transmittance, absorption edge, optical energy gap and Urbach energy. Based on the Raman spectra, the structural analysis indicates that, increasing the network connectivity upon increasing the arsenic content up to 7.5 mole% is the main reason of anomalous behavior in Se₆₀Ge_40-xSb₅As_x (0 ≤ x ≤ 15) system.     

Synthesis,measurements, and theoretical analysis of carbazole derivatives with high-triplet-energy

In order to obtain the blue light-emitting organic materials with high triplet state energy, two 3,5-diphenyl-4H-1,2,4-triazole (Tz) containing carbazole (Cz) derivatives of 9-(4-(3,5-diphenyl-4H-1,2,4-triazol-4-yl)phenyl)-9H-carbazole (TzCz1) and 3,6-di-tert-butyl-9-(4-(3,5-diphenyl-4H-1,2,4-triazol-4-yl)phenyl)-9H-carbazole (TzCz2) are synthesized using Cz acting as the starting material, as well as characterized by the ¹H NMR spectra, ultraviolet–visible (UV–vis) absorption spectra, and the IR absorption spectra. The luminescence quantum yields (LQYs) of TzCz1 and TzCz2 are measured in CH₂Cl₂ solution to be 32.1% and 47.5%, respectively. The electrochemical analysis and the photophysical measurements suggest that the triplet energy levels and the energy gaps of the highest-occupied orbital and the lowest-unoccupied orbital are 2.83 eV and 3.59 eV for TzCz1, and 2.80 eV and 3.43 eV for TzCz2. At last, the theoretical analyses of their ground state geometries and the simulated UV–vis absorption spectra are carried out at B3LYP1/6-31G? level. The studies mentioned above indicate that both TzCz1 and TzCz2 are suitable for the host materials of blue light-emitting diodes.     

Influence of electron beam irradiation on structural and optical properties of α-Ag2WO4 nanoparticles

The influence of 8 MeV electron beam irradiation on the structural and optical properties of silver tungstate (α-Ag₂WO₄) nanoparticles synthesized by chemical precipitation method was investigated. The dose dependent effect of electron irradiation was investigated by various characterization techniques such as, X-ray diffraction, scanning electron microscopy, UV–vis absorption spectroscopy, photoluminescence and Raman spectroscopy. Systematic studies confirm that electron beam irradiation induces non-stoichiometry, defects and particle size variation on α-Ag₂WO₄, which in turn results changes in optical band gap, photoluminescence spectra and Raman bands.     

Synthesis and characterization of nanostructural CuS–ZnS binary compound thin films prepared by spray pyrolysis

We have investigated the effect of zinc concentration ([Zn]/[Cu]=0–100 at%) on nanostructural, optical and electrical properties of CuS–ZnS binary thin films grown on glass substrate by the spray pyrolysis technique. X-ray diffraction analysis showed that the films were crystallized with mixed structures of CuS hexagonal and ZnS cubic structure. UV–vis optical measurements analysis showed that these binary films have a relatively high absorption coefficient (～10⁵ cm^?1) in the visible spectrum with a direct band gap in the range of 2.57–2.45 eV in agreement with the corresponding room temperature PL spectra. The electrical studies showed that all these samples have a p-type conductivity and the free hole density decreases with increasing [Zn]/[Cu] molar ratio, in agreement with the reflectance spectra of the layers, originating from plasma oscillations.     

Photocatalytic water splitting of La2AlTaO7 and the effect of aluminum on the electronic structure

A new photocatalyst La₂AlTaO₇ with orthorhombic structure was synthesized by the solid-state reaction method. The formation rate of H₂ evolution from CH₃OH/H₂O solution under the irradiation of a 350 W high-pressure Hg lamp is about 108.9 μmol h^?1 for La₂AlTaO₇ (0.1 g). It also showed activity leading to the decomposition of pure water into H₂ and O₂ even in the absence of co-catalysts under UV light irradiation. The photocatalyst loaded with 0.2 wt% NiO co-catalyst was found to have the highest activity. It was found from the electronic band structure study, using the density functional theory (DFT) with plane-wave basis, that the valence band top mainly consists of O 2p orbitals and the conduction band bottom is mainly constructed of Al 3s3p. The effect of aluminum on electronic structure was discussed in close connection with the UV–vis absorption spectrum.