Ultrathin SnO2 Scaffolds for TiO2‐Based Heterojunction Photoanodes in Dye‐Sensitized Solar Cells: Oriented Charge Transport and Improved Light Scattering

In this paper, band‐structure matching strategy of a TiO₂‐based heterojunction within which electrons can be collected from TiO₂ nanoparticles and transported rapidly in the bulk structure is reported. On the basis of the band‐structure analysis of different TiO₂‐based heterostructures, focus was directed to the SnO₂ nanosheet because of its appropriate band position and high electrical conductivity. Through a systematic investigation of the incorporation of ultrathin SnO₂ nanosheet scaffolds for TiO₂‐based photoanodes in dye‐sensitized solar cells (DSCs), we propose an anisotropy “constrained random walk” model to describe the controlled electron transit process. In this system, electrons are transferred orientedly overall, as well as randomly locally, leading to a significant reduction in the charge diffusion route compared to the conventional isotropic “random walk” model. In brief, the 2D ultrathin nanosheets provide rapid transit pathways and improved light‐scattering centers, which can ensure a sufficient amount of dye loading and slow recombination. An overall light‐to‐electricity conversion efficiency as high as 8.25 % is achieved by embedding the appropriate amount of SnO₂ scaffold in a TiO₂‐based photoanode.     

Probing Second Harmonic Components of pH‐Sensitive Redox Processes in a Mesoporous TiO2‐Nafion Film Electrode with Fourier‐Transformed Large‐Amplitude Sinusoidally Modulated Voltammetry

Electrochemical processes in mesoporous TiO₂‐Nafion thin films deposited on indium tin oxide (ITO) electrodes are inherently complex and affected by capacitance, Ohmic iR‐drop, RC‐time constant phenomena, and by potential and pH‐dependent conductivity. In this study, large‐amplitude sinusoidally modulated voltammetry (LASMV) is employed to provide access to almost purely Faradaic‐based current data from second harmonic components, as well as capacitance and potential domain information from the fundamental harmonic for mesoporous TiO₂‐Nafion film electrodes. The LASMV response has been investigated with and without an immobilized one‐electron redox system, ferrocenylmethyltrimethylammonium⁺. Results clearly demonstrate that the electron transfer associated with the immobilized ferrocene derivative follows two independent pathways i) electron hopping within the Nafion network and ii) conduction through the TiO₂ backbone. The pH effect on the voltammetric response for the TiO₂ reduction pathway (ii) can be clearly identified in the 2^nd harmonic LASMV response with the diffusion controlled ferrocene response (i) acting as a pH independent reference. Application of second harmonic data derived from LASMV measurement, because of the minimal contribution from capacitance currents, may lead to reference‐free pH sensing with systems like that found for ferrocene derivatives.     

Investigation of Electron Behavior in Nano‐TiO2 Photocatalysis by Using In Situ Open‐Circuit Voltage and Photoconductivity Measurements

The in situ open‐circuit voltages (V_oc) and the in situ photoconductivities have been measured to study electron behavior in photocatalysis and its effect on the photocatalytic oxidation of methanol. It was observed that electron injection to the conduction band (CB) of TiO₂ under light illumination during photocatalysis includes two sources: from the valence band (VB) of TiO₂ and from the methanol molecule. The electron injection from methanol to TiO₂ is slower than that directly from the VB, which indicates that the adsorption mode of methanol on the TiO₂ surface can change between dark and illuminated states. The electron injection from methanol to the CB of TiO₂ leads to the upshift of the Fermi level of electrons in TiO₂, which is the thermodynamic driving force of photocatalytic oxidation. It was also found that the charge state of nano‐TiO₂ is continuously changing during photocatalysis as electrons are injected from methanol to TiO₂. Combined with the apparent Langmuir–Hinshelwood kinetic model, the relation between photocatalytic kinetics and electrons in the TiO₂ CB was developed and verified experimentally. The photocatalytic rate constant is the variation of the Fermi level with time, based on which a new method was developed to calculate the photocatalytic kinetic rate constant by monitoring the change of V_oc with time during photocatalysis.     

Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

Single‐Nanoparticle Photoelectrochemistry at a Nanoparticulate TiO2‐Filmed Ultramicroelectrode

An ultrasensitive photoelectrochemical method for achieving real‐time detection of single nanoparticle collision events is presented. Using a micrometer‐thick nanoparticulate TiO₂‐filmed Au ultra‐microelectrode (TiO₂@Au UME), a sub‐millisecond photocurrent transient was observed for an individual N719‐tagged TiO₂ (N719@TiO₂) nanoparticle and is due to the instantaneous collision process. Owing to a trap‐limited electron diffusion process as the rate‐limiting step, a random three‐dimensional diffusion model was developed to simulate electron transport dynamics in TiO₂ film. The combination of theoretical simulation and high‐resolution photocurrent measurement allow electron‐transfer information of a single N719@TiO₂ nanoparticle to be quantified at single‐molecule accuracy and the electron diffusivity and the electron‐collection efficiency of TiO₂@Au UME to be estimated. This method provides a test for studies of photoinduced electron transfer at the single‐nanoparticle level.     

Triphenylamine Groups Improve Blocking Behavior of Phenoxazine Dyes in Cobalt‐Electrolyte‐Based Dye‐Sensitized Solar Cells

Novel phenoxazine dyes are successfully introduced as sensitizers into dye‐sensitized solar cells (DSCs) with cobalt‐based electrolyte. In sensitizers with triphenylamine (TPA) groups recombination from electrons in the TiO₂ conduction band to the cobalt(III) species is suppressed. The effect of the steric properties of the phenoxazine sensitizers on the overall device performance and on recombination and regeneration processes is compared. Optimized DSCs sensitized with IB2 having two TPA groups in combination with tris(2,2′‐bipyridyl) cobalt(II/III) yield efficiencies of 6.3 %, similar to that of IB3 , which is equipped with mutiple alkoxy groups. TH310 with only one TPA group gives lower efficiency and open circuit voltage, while IB1 without TPA groups performs even worse. These results demonstrate that both TPA groups on the IB2 are needed for an efficient blocking effect. These results reveal a possible new role for TPA units in DSC sensitizer design.     

Extensive Reduction in Back Electron Transfer in Twisted Intramolecular Charge‐Transfer (TICT) Coumarin‐Dye‐Sensitized TiO2 Nanoparticles/Film: A Femtosecond Transient Absorption Study

We report the synthesis, characterization, and optical and electrochemical properties of two structurally similar coumarin dyes ( C1 and C2 ). These dyes have been deployed as sensitizers in TiO₂ nanoparticles and thin films, and the effect of molecular structure on interfacial electron‐transfer dynamics has been studied. Steady‐state optical absorption, emission, and time‐resolved emission studies on both C1 and C2 , varying the polarity of the solvent and the solution pH, suggest that both photoexcited dyes exist in a locally excited (LE) state in solvents of low polarity. In highly polar solvents, however, C1 exists in an intramolecular charge‐transfer (ICT) state, whereas C2 exists in both ICT and twisted intramolecular charge‐transfer (TICT) states, their populations depending on the degree of polarity of the solvent and the pH of the solution. We have employed femtosecond transient absorption spectroscopy to monitor the charge‐transfer dynamics in C1 ‐ and C2 ‐sensitized TiO₂ nanoparticles and thin films. Electron injection has been confirmed by direct detection of electrons in the conduction band of TiO₂ nanoparticles and of radical cations of the dyes in the visible and near‐IR regions of the transient absorption spectra. Electron injection in both the C1 /TiO₂ and C2 /TiO₂ systems has been found to be pulse‐width limited (<100 fs); however, back‐electron‐transfer (BET) dynamics has been found to be slower in the C2 /TiO₂ system than in the C1 /TiO₂ system. The involvement of TICT states in C2 is solely responsible for the higher electron injection yield as well as the slower BET process compared to those in the C1 /TiO₂ system. Further pH‐dependent experiments on C1 ‐ and C2 ‐sensitized TiO₂ thin films have corroborated the participation of the TICT state in the slower BET process in the C2 /TiO₂ system.     

Elementary Photoelectronic Processes at a Porphyrin Dye/Single‐Walled TiO2 Nanotube Hetero‐interface in Dye‐Sensitized Solar Cells: A First‐Principles Study

A unique one‐dimensional (1D) sandwich single‐walled TiO₂ nanotube (STNT) is proposed as a photoanode nanomaterial with perfect morphology and large specific surface area. We have thoroughly examined the elementary photoelectronic processes occurring at the porphyrin dye/STNT hetero‐interface in dye‐sensitized solar cells (DSSCs) by theoretical simulation. It is desirable to investigate the interfacial photoelectronic processes to elucidate the electron transfer and transport mechanism in 1D STNT‐based DSSCs. We have found that the photoexcitation and interfacial charge separation mechanism can be described as follows. A ground‐state electron of the dye molecule (localized around the electron donor) is first promoted to the excited state (distributed electron donor), and then undergoes ultrafast injection into the conduction band of the STNT, leaving a hole around the oxidized dye. Significantly, the injected electron in the conduction band is transported along the STNT by means of Ti 3d orbitals, offering a unidirectional electron pathway toward the electrode for massive collection without the observation of trap states. Our study not only provides theoretical guidelines for the modification of TiO₂ nanotubes as a photoanode material, but also opens a new perspective for the development of a novel class of TiO₂ nanotubes with high power‐generation efficiency.     

A Computational and Experimental Study of Thieno[3,4‐b]thiophene as a Proaromatic π‐Bridge in Dye‐Sensitized Solar Cells

Four D ‐π‐A dyes (D=donor, A=accpetor) based on a 3,4‐thienothiophene π‐bridge were synthesized for use in dye‐sensitized solar cells (DSCs). The proaromatic building block 3,4‐thienothiophene is incorporated to stabilize dye excited‐state oxidation potentials. This lowering of the excited‐state energy levels allows for deeper absorption into the NIR region with relatively low molecular weight dyes. The influence of proaromatic functionality is probed through a computational analysis of optimized bond lengths and nucleus independent chemical shifts (NICS) for both the ground‐ and excited‐ states. To avoid a necessary lowering of the TiO₂ semiconductor conduction band (CB) to promote efficient dye–TiO₂ electron injection, strong donor functionalities based on triaryl‐ and diarylamines are employed in the dye designs to raise both the ground‐ and excited‐state oxidation potentials of the dyes. Solubility, aggregation, and TiO₂ surface protection are addressed by examining an ethylhexyl alkyl chain in comparison to a simple ethyl chain on the 3,4‐thienothiophene bridge. Power conversion efficiencies of up to 7.8 % are observed.     

BiVO4‐TiO2 Composite Photocatalysts for Dye Degradation Formed Using the SILAR Method

Composite photocatalyst films have been fabricated by depositing BiVO₄ upon TiO₂ via a sequential ionic layer adsorption reaction (SILAR) method. The photocatalytic materials were investigated by XRD, TEM, UV/Vis diffuse reflectance, inductively coupled plasma optical emission spectrometry (ICP‐OES), XPS, photoluminescence and Mott–Schottky analyses. SILAR processing was found to deposit monoclinic‐scheelite BiVO₄ nanoparticles onto the surface, giving successive improvements in the films′ visible light harvesting. Electrochemical and valence band XPS studies revealed that the prepared heterojunctions have a type II band structure, with the BiVO₄ conduction band and valence band lying cathodically shifted from those of TiO₂. The photocatalytic activity of the films was measured by the decolourisation of the dye rhodamine 6G using λ>400 nm visible light. It was found that five SILAR cycles was optimal, with a pseudo‐first‐order rate constant of 0.004 min^?1. As a reference material, the same SILAR modification has been made to an inactive wide‐band‐gap ZrO₂ film, where the mismatch of conduction and valence band energies disallows charge separation. The photocatalytic activity of the BiVO₄–ZrO₂ system was found to be significantly reduced, highlighting the importance of charge separation across the interface. The mechanism of action of the photocatalysts has also been investigated, in particular the effect of self‐sensitisation by the model organic dye and the ability of the dye to inject electrons into the photocatalyst′s conduction band.     

Electron Transfer in Dye‐Sensitised Semiconductors Modified with Molecular Cobalt Catalysts: Photoreduction of Aqueous Protons

A visible‐light driven H₂ evolution system comprising of a Ru^II dye ( RuP ) and Co^III proton reduction catalysts ( CoP ) immobilised on TiO₂ nanoparticles and mesoporous films is presented. The heterogeneous system evolves H₂ efficiently during visible‐light irradiation in a pH‐neutral aqueous solution at 25 °C in the presence of a hole scavenger. Photodegradation of the self‐assembled system occurs at the ligand framework of CoP , which can be readily repaired by addition of fresh ligand, resulting in turnover numbers above 300 mol H₂ (mol CoP )^?1 and above 200,000 mol H₂ (mol TiO₂ nanoparticles)^?1 in water. Our studies support that a molecular Co species, rather than metallic Co or a Co‐oxide precipitate, is responsible for H₂ formation on TiO₂. Electron transfer in this system was studied by transient absorption spectroscopy and time‐correlated single photon counting techniques. Essentially quantitative electron injection takes place from RuP into TiO₂ in approximately 180 ps. Thereby, upon dye regeneration by the sacrificial electron donor, a long‐lived TiO₂ conduction band electron is formed with a half‐lifetime of approximately 0.8 s. Electron transfer from the TiO₂ conduction band to the CoP catalysts occurs quantitatively on a 10 μs timescale and is about a hundred times faster than charge‐recombination with the oxidised RuP . This study provides a benchmark for future investigations in photocatalytic fuel generation with molecular catalysts integrated in semiconductors.     

The Influence of Charge Transport and Recombination on the Performance of Dye‐Sensitized Solar Cells

Electrochemical impedance spectroscopy (EIS) and transient voltage decay measurements are applied to compare the performance of dye sensitized solar cells (DSCs) using organic electrolytes, ionic liquids and organic‐hole conductors as hole transport materials (HTM). Nano‐crystalline titania films sensitized by the same heteroleptic ruthenium complex NaRu(4‐carboxylic acid‐4′‐carboxylate) (4,4′‐dinonyl‐2,2′‐bipyridyl)(NCS)₂ , coded Z‐907Na are employed as working electrodes. The influence of the nature of the HTM on the photovoltaic figures of merit, that is, the open circuit voltage, short circuit photocurrent and fill factor is evaluated. In order to derive the electron lifetime, as well as the electron diffusion coefficient and charge collection efficiency, EIS measurements are performed in the dark and under illumination corresponding to realistic photovoltaic operating conditions of these mesoscopic solar cells. A theoretical model is established to interpret the frequency response off the impedance under open circuit conditions, which is conceptually similar to photovoltage transient decay measurements. Important information on factors that govern the dynamics of electron transport within the nanocrystalline TiO₂ film and charge recombination across the dye sensitized heterojunction is obtained.     

Highly efficient dye-sensitized SnO2 solar cells having sufficient electron diffusion length

Dye-sensitized solar cells (DSCs) were fabricated from mesoporous SnO₂ electrodes, which were prepared from nano-sized SnO₂ particles. Current–voltage characteristics of the DSCs were compared with DSCs prepared from conventional TiO₂ electrodes, which have similar amount of adsorbed dye with the SnO₂. As a result, short-circuit current of the SnO₂DSC were comparable with that of the TiO₂DSCs, and more than 15 mA/cm² was obtained with the SnO₂ at the thickness of 10 μm under one sun conditions. Electron diffusion coefficients and lifetimes in the SnO₂ and TiO₂ electrodes were measured, showing slower diffusion and longer lifetime in the SnO₂DSC than in the TiO₂. The results imply that the electron transport and transfer dynamics in such electrodes is dominated by the influence of intra-band charge traps, and the control of the trap conditions would be the key strategy to employ various metal oxides for such solar cells.     

Gold particles supported on self-organized nanotubular TiO2 matrix as highly active catalysts for electrochemical oxidation of glucose

Au/TiO₂/Ti electrode was prepared by a two-step process of anodic oxidation of titanium followed by cathodic electrodeposition of gold on resulted TiO₂. The morphology and surface analysis of Au/TiO₂/Ti electrodes was investigated using scanning electron microscopy and EDAX, respectively. The results indicated that gold particles were homogeneously deposited on the surface of TiO₂ nanotubes. The nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm in diameter, and the electrode surface was covered by gold particles with a diameter of about 100–200 nm which are distributed evenly on the titanium dioxide nanotubes. This nanotubular TiO₂ support provides a high surface area and therefore enhances the electrocatalytic activity of Au/TiO₂/Ti electrode. The electrocatalytic behavior of Au/TiO₂/Ti electrodes in the glucose electro-oxidation was studied by cyclic voltammetry. The results showed that Au/TiO₂/Ti electrodes exhibit a considerably higher electrocatalytic activity toward the glucose oxidation than that of gold electrode.     

Effect of Substituents in Catechol Dye Sensitizers on Photovoltaic Performance of Type II Dye‐Sensitized Solar Cells

In order to provide a direction in molecular design of catechol (Cat) dyes for type II dye‐sensitized solar cells (DSSCs), the dye‐to‐TiO₂ charge‐transfer (DTCT) characteristics of Cat dyes with various substituents and their photovoltaic performance in DSSCs are investigated. The Cat dyes with electron‐donating or moderately electron‐withdrawing substituents exhibit a broad absorption band corresponding to DTCT upon binding to TiO₂ films, whereas those with strongly electron‐withdrawing substituents exhibit weak DTCT. This study indicates that the introduction of a moderately electron‐withdrawing substituent on the Cat moiety leads to not only an increase in the DTCT efficiency, but also the retardation of back electron transfer. This results in favorable conditions for the type II electron‐injection pathway from the ground state of the Cat dye to the conduction band of the TiO₂ electrode by the photoexcitation of DTCT bands.     

Synthesis of N-doped TiO2 particles from aquaethylenediaminetitanium(IV) hydroxide complex and their optical properties on dye-sensitized solar cells

To promote the photoelectric conversion efficiency of solar cell, N-doped TiO₂ particles are introduced as working electrodes in dye-sensitized solar cells. The N-doped TiO₂ particles (N–en–TiO₂) are easily synthesized from [Ti(NH₂CH₂CH₂NH₂) _x (H₂O) _y ]zOH (aquaethylenediaminetitanium(IV) hydroxide) complex using a modified sol–gel process. The produced N–en–TiO₂ particles show rice-shapes of 25–50 nm and their band-gaps become to be shorter than that of TiO₂. The N–en–TiO₂ particles are applied to working electrode layers in dye-sensitized solar cells, and on comparing the performances of pure TiO₂ and N–en₂–TiO₂–DSCs, the latter shows good performance with a solar energy conversion efficiency of ~5.54 % versus the former of 4.21 % respectively with a notable photocurrent enhancement. Particularly, the N–en₂–TiO₂–DSCs exhibit relatively low charge transfer resistance at counter electrode and electron transfer resistance from dye/TiO₂/photoanode, slower recombination times, faster electron transport times, and higher electron diffusion coefficients than non-doped TiO₂–DSCs.     

Bi‐anchoring Organic Dyes that Contain Benzimidazole Branches for Dye‐Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole‐branched bi‐anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2‐cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye‐sensitized solar cells. The structure–activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more‐heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λ_max) was red‐shifted on changing the π linker from phenyl to 2,2′‐bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (?) than their analogous phenothiazine‐based triphenylamine dyes, which led to good light‐harvesting properties in the triphenylamine‐based dyes. Electrochemical data for the dyes indicated that the triphenylamine‐based dyes possessed relatively low‐lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO₂ to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2′‐bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2′‐bithiophene as the π linkers was beneficial for disrupting the dark current and charge‐recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO₂.     

Single‐Walled TiO2 Nanotubes: Enhanced Carrier‐Transport Properties by TiCl4 Treatment

In the present work we report significant enhancement of the photoelectrochemical properties of self‐ organized TiO₂ nanotubes by a combined “de‐coring” of classic nanotubes followed by an appropiate TiCl4 treatment. We show that, except for the expected particle decoration, a key effect of the TiCl4 treatment is that the electron transport characteristics in TiO₂ nanotubes can be drastically improved, for example, we observe an enhancement of up to 70 % in electron‐transport times.     

Enhancing the electrochromic characteristics of conjugated polymer with TiO2 nano‐rods

Organic soluble, oleic acid capped TiO₂ nano‐rod was well‐mixed with the electrochromic polymer: Poly‐(4,4‐dioctylcyclopenta[2,1‐b:3,4‐b′]‐dithiophene (PDOCPDT) to form TiO₂/PDOCPDT nanocompsoite. TiO₂/PDOCPDT film showed high electrochemical stability and its coloration efficiency is 1.5 times of that for pure PDOCPDT. The function of TiO₂ nano‐rods can be regarded as a dispersion agent. PDOCPDT chains in TiO₂/PDOCPDT may have a less aggregated structure and more open morphology, therefore has higher coloration efficiency. TiO₂ may also act as electron transport or temporary electron storage centers, electrons can be transferred reversibly between PDOCPDT and TiO₂ nano‐rods. TiO₂/PDOCPDT is well‐soluble in CHCl₃, large area thin films can be fabricated reproducibly simply by spin coating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1121–1130, 2008     

Dye degradation studies of Mo‐doped TiO2 thin films developed by reactive sputtering

TiO₂ thin films with various Mo concentrations have been deposited on glass and n‐type silicon (100) substrates by this radio‐frequency (RF) reactive magnetron sputtering at 400°C substrate temperature. The crystal structure, surface morphology, composition, and elemental oxidation states of the films have been analyzed by using X‐ray diffraction, field emission scanning electron microscopy, atomic force microscopy, and X‐ray photoelectron spectroscopy, respectively. Ultraviolet‐visible spectroscopy has been used to investigate the degradation, transmittance, and absorption properties of doped and undoped TiO₂ films. The photocatalytic degradation activity of the films was evaluated by using methylene blue under a light intensity of 100 mW cm⁻². The X‐ray diffraction patterns show the presence of anatase phase of TiO₂ in the developed films. X‐ray photoelectron spectroscopy studies have confirmed that Mo is present only as Mo⁶⁺ ions in all films. The Mo/TiO₂ band gap decreases from ~3.3 to 3.1 eV with increasing Mo dopant concentrations. Dye degradation of ~60% is observed in Mo/TiO₂ samples, which is much higher than that of pure TiO₂.