Mean‐field theoretical analysis of brush‐coated nanoparticle dispersion in polymer matrices

The equilibrium dispersion of nanoparticles with grafted polymer chains into polymer matrices, of the same chemical structure as the brush, is studied through the device of mean‐field theory. Our results show that the disperion of brush‐coated nanoparticles into a matrix polymer is improved with (i) decreasing particle radius and (ii) increasing brush chain length. Both of these aspects can be understood based on the fact that, unlike the case of planar surfaces, homopolymer chains end‐grafted to spherical nanoparticle surfaces tangentially spread away from the surface thus alleviating the packing frustration that is created by the relatively high grafting densities. This permits significant brush/matrix overlap, even at high grafting densities, a regime that has only recently become experimentally available due to advances in polymer synthesis (i.e., the “grafting‐to” methods). © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 351–358, 2008     

High‐Density Liquid‐Crystalline Polymer Brushes Formed by Surface Segregation and Self‐Assembly

High‐density polymer brushes on substrates exhibit unique properties and functions stemming from the extended conformations due to the surface constraint. To date, such chain organizations have been mostly attained by synthetic strategies of surface‐initiated living polymerization. We show herein a new method to prepare a high‐density polymer brush architecture using surface segregation and self‐assembly of diblock copolymers containing a side‐chain liquid‐crystalline polymer (SCLCP). The surface segregation is attained from a film of an amorphous base polymer (polystyrene, PS) containing a minor amount of a SCLCP‐PS diblock copolymer upon annealing above the glass‐transition temperature. The polystyrene portion of the diblock copolymer can work as a laterally mobile anchor for the favorable self‐assembly on the polystyrene base film.     

Multiple levels hydrophobic modification of polymeric substrates by UV‐grafting polymerization with TFEMA as monomer

The hydrophobic solid surface modification with fluorine‐containing monomers has received tremendous attention because of its unique structure and excellent property. However, these hydrophobic films normally suffer from two major problems: one is weak interface interaction between fluoropolymers and substrates, and the other is the high cost of fluorine‐containing monomers. Herein, with the aim of feasible industrial application, a facile in situ UV photo‐grafting method is reported, which could ensure the formation of chemical bonds between fluoropolymer‐grafted layer and substrate with a low cost commercial 2,2,2‐trifluoroethyl methacrylate (TFEMA) as monomer. With low‐density polyethylene (LDPE) film as a model substrate, four kinds of poly‐TFEMA‐grafted layer are fabricated on LDPE films with different surface morphologies: polymer brush, polymer network, crosslinked nanoparticles, and a micro‐ and nanoscale hierarchical structure. The experimental results showed that the water contact angles (CAs) of the LDPE films grafted with polymer brush, polymer network, and crosslinked nanoparticles were (103 ± 2)°, (95 ± 2)°, and (122 ± 2)°, respectively, which were much higher than that of LDPE film. The introduction of micro‐ and nanoscale hierarchical structures can dramatically improve the surface roughness, which will further enhance the film hydrophobicity, and the water CA can reach as high as (140 ± 1)°. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1059–1067     

Investigating the chain conformations of spin‐coated polymer thin films by ToF‐SIMS depth profiling

Thin films of bromine‐terminated poly(bisphenol A octane ether) (BA‐C10) were prepared using 1,2‐dichlorobenzene (ODCB) as the solvent. The organization of the chains in these amorphous polymer films was evaluated using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) depth profiling. For the thin films, the bifunctional polymer chains were folded and anchored to the substrate via their two Br end groups and a polymer brush of chain loops was formed on the substrate. As the film thickness increased, polymer chains in a random coil conformation were found to reside on the top of the polymer brush. Depth profiling revealed that the polymer chains were densely packed at the interface. Moreover, the polymer films showed thermal stability, implying strong interactions between the end groups and the substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication of Chemically Tethered Binary Polymer‐Brush Pattern through Two‐Step Surface‐Initiated Atomic‐Transfer Radical Polymerization

Summary: The communication provides a novel and alternative route to generate chemically tethered binary polymer‐brush pattern through two‐step surface‐initiated atomic‐transfer radical polymerization (SI‐ATRP). Polymer brush‐1 was prepared by SI‐ATRP, passivated by a reaction with NaN₃, and etched with UV irradiation through a transmission electron microscopy grid to create exposed sites for the subsequently attached initiator on which polymer brush‐2 was grown.

Schematic representation of the resultant binary polymer brush patterns.     

Copper nanoparticles seeded functionalized‐PVC plastic surface for electroless nickel deposition

A novel and facile activation process for electroless nickel deposition was developed. The semi‐interpenetrating polymer network hydrogel biofilm was used to functionalize the inert poly(vinyl chloride) (PVC) surface, and then Cu nanoparticles, which can initial the subsequent electroless nickel deposition successfully seeded on the functionalized‐PVC surface. The samples were characterized by scanning electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and transmission electron microscopy. The results show that the hydrogel film provided the PVC surface with amino groups and Cu nanoparticles of 20–50 nm in size could be functioned as the catalytic nuclei for the subsequent electroless metal deposition on PVC plastic. It can be concluded that the novel Cu activation was effective for the nickel deposition on PVC surface, because of more chemisorption sites for Cu nanoparticles generated on PVC surface. Copyright © 2013 John Wiley & Sons, Ltd.     

A Cascade‐Reaction Nanoreactor Composed of a Bifunctional Molecularly Imprinted Polymer that Contains Pt Nanoparticles

This study was aimed at addressing the present challenge of cascade reactions, namely, how to furnish the catalysts with desired and hierarchical catalytic ability. This issue was addressed by constructing a cascade‐reaction nanoreactor made of a bifunctional molecularly imprinted polymer containing acidic catalytic sites and Pt nanoparticles. The acidic catalytic sites within the imprinted polymer allowed one specified reaction, whereas the encapsulated Pt nanoparticles were responsible for another coupled reaction. To that end, the unique imprinted polymer was fabricated by using two well‐coupled templates, that is, 4‐nitrophenyl acetate and 4‐nitrophenol. The catalytic hydrolysis of the former compound at the acidic catalytic sites led to the formation of the latter compound, which was further reduced by the encapsulated Pt nanoparticles to 4‐aminophenol. Therefore, this nanoreactor demonstrated a catalytic‐cascade ability. This protocol opens up the opportunity to develop functional catalysts for complicated chemical processes.     

Macroscale Chemotaxis from a Swarm of Bacteria‐Mimicking Nanoswimmers

Inspired by the dynamics of bacterial swarming, we report a swarm of polymer‐brush‐grafted, glucose‐oxidase‐powered Janus gold nanoswimmers with a positive, macroscale chemotactic behavior. These nanoswimmers are prepared through the grafting of polymer brushes onto one side of gold nanoparticles, followed by functionalization with glucose oxidase on the other side. The resulting polymer‐brush‐functionalized Janus gold nanoswimmers exhibit efficient propulsion with a velocity of up to approximately 120 body lengths s^?1 in the presence of glucose. The comparative analysis of their kinematic behavior reveals that the grafted polymer brushes significantly improve the translational diffusion of Janus gold nanoswimmers. Particularly, these bacteria‐mimicking Janus gold nanoswimmers display a collectively chemotactic motion along the concentration gradient of a glucose resource, which could be observed at the macroscale.     

Highly Stable,Water‐Dispersible Metal‐Nanoparticle‐Decorated Polymer Nanocapsules and Their Catalytic Applications

A facile synthesis of highly stable, water‐dispersible metal‐nanoparticle‐decorated polymer nanocapsules (M@CB‐PNs: M=Pd, Au, and Pt) was achieved by a simple two‐step process employing a polymer nanocapsule (CB‐PN) made of cucurbit[6]uril (CB[6]) and metal salts. The CB‐PN serves as a versatile platform where various metal nanoparticles with a controlled size can be introduced on the surface and stabilized to prepare new water‐dispersible nanostructures useful for many applications. The Pd nanoparticles on CB‐PN exhibit high stability and dispersibility in water as well as excellent catalytic activity and recyclability in carbon–carbon and carbon–nitrogen bond‐forming reactions in aqueous medium suggesting potential applications as a green catalyst.     

Highly Stable,Water‐Dispersible Metal‐Nanoparticle‐Decorated Polymer Nanocapsules and Their Catalytic Applications

A facile synthesis of highly stable, water‐dispersible metal‐nanoparticle‐decorated polymer nanocapsules (M@CB‐PNs: M=Pd, Au, and Pt) was achieved by a simple two‐step process employing a polymer nanocapsule (CB‐PN) made of cucurbit[6]uril (CB[6]) and metal salts. The CB‐PN serves as a versatile platform where various metal nanoparticles with a controlled size can be introduced on the surface and stabilized to prepare new water‐dispersible nanostructures useful for many applications. The Pd nanoparticles on CB‐PN exhibit high stability and dispersibility in water as well as excellent catalytic activity and recyclability in carbon–carbon and carbon–nitrogen bond‐forming reactions in aqueous medium suggesting potential applications as a green catalyst.     

Tea‐Bag‐Like Polymer Nanoreactors Filled with Gold Nanoparticles

Gold‐containing polymer nanotubes, which showed both catalytic activity and resistance to leaching, were prepared by the “tubes by fiber templates” (TUFT) process. For this purpose, electrospun polymer nonwovens with incorporated poly(L ‐lactide)‐stabilized gold nanoparticles were coated with poly(p‐xylylene) by the chemical vapor deposition process, and then the inner fiber templates were removed. The resulting polymer tubes carried encapsulated gold nanoparticles which were shown to be immobilized and featured pronounced catalytic activity towards the hydrolytic oxidation of dimethylphenylsilane and the alcoholysis of dimethylphenylsilane with n‐butanol. The macroscopic nonwovens could be used as tea‐bag‐like catalyst systems and showed excellent reusability.     

Preparation of an Electrode That Immobilizes NAD‐Dependent Alcohol Dehydrogenase by Using a Redox Polymer Containing 1,10‐Phenanthroline‐5,6‐dione

A redox polymer (PAHA‐Ru), modified electrode exhibited excellent catalytic activity for the electrochemical oxidation of β‐nicotinamide adenine dinucleotide (NADH). PAHA‐Ru was composed of carboxyl groups and ruthenium complexes containing 1,10‐phenanthroline‐5,6‐dione (phen‐dione). The stability of the PAHA‐Ru film was increased by incorporating poly(diallyldimethylammonium chloride) (PDDA) owing to the formation of a polyelectrolyte complex between the PAHA‐Ru and PDDA. The catalytic efficiency of the oxidation of NADH using the PAHA‐Ru/PDDA‐modified electrode was also greater than that using a PAHA‐Ru‐modified electrode. NAD‐dependent alcohol dehydrogenase (ADH) was entrapped in the PAHA‐Ru/PDDA film on the surface of the glassy carbon electrode. Electrochemical oxidation of ethanol using the ADH‐entrapped electrode was also observed.     

Catalytic reduction of 4‐nitrophenol using silver nanoparticles‐engineered poly(N‐isopropylacrylamide‐co‐acrylamide) hybrid microgels

Nearly monodisperse poly(N ‐isopropylacrylamide‐co ‐acrylamide) [P(NIPAM‐co‐AAm)] microgels were synthesized using precipitation polymerization in aqueous medium. These microgels were used as microreactors to fabricate silver nanoparticles by chemical reduction of silver ions inside the polymer network. The pure and hybrid microgels were characterized using Fourier transform infrared and UV–visible spectroscopies, dynamic light scattering, X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry and transmission electron microscopy. Results revealed that spherical silver nanoparticles having diameter of 10–20 nm were successfully fabricated in the poly(N ‐isopropylacrylamide‐co ‐acrylamide) microgels with hydrodynamic diameter of 250 ± 50 nm. The uniformly loaded silver nanoparticles were found to be stable for long time due to donor–acceptor interaction between amide groups of polymer network and silver nanoparticles. Catalytic activity of the hybrid system was tested by choosing the catalytic reduction of 4‐nitrophenol as a model reaction under various conditions of catalyst dose and concentration of NaBH₄ at room temperature in aqueous medium to explore the catalytic process. The progress of the reaction was monitored using UV–visible spectrophotometry. The pseudo first‐order kinetic model was employed to evaluate the apparent rate constant of the reaction. It was found that the apparent rate constant increased with increasing catalyst dose due to an increase of surface area as a result of an increase in the number of nanoparticles.     

Palladium magnetic nanoparticle‐polyethersulfone composite membrane as an efficient and versatile catalytic membrane reactor

Developing polymer catalytic membrane reactors is an aim due to its outstanding advantages. In this paper, a novel catalytic membrane containing palladium‐supported magnetic nanoparticles is introduced. Silica‐iron oxide core shell nanoparticles were first prepared and functionalized by phosphine ionic liquid functionalized poly(ethylene glycol). The modified magnetic nanoparticles were used as support for immobilization of palladium. The final palladium‐immobilized nanoparticles were used as active filler for the preparation of membrane reactor. The prepared membranes were characterized, and their activities were tested in carbon‐carbon bond formation and catalytic reduction. The catalytic membrane showed good performance in the mentioned reactions.     

Facile Synthesis of Free‐Standing Polymer Brush Films Based on a Colorless Polydopamine Thin Layer

A free‐standing polymer brush film with tailored thicknesses based on a colorless polydopamine (PDA) thin layer is prepared and characterized. The surface‐initiated atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) is performed on a PDA layer with thickness of ca. 6 nm, which generated an optically transparent and colorless free‐standing PHEMA brush film (1.5 cm × 1.5 cm). Because the cross‐linked PDA layer is used as the base for the polymer brushes, the reported method does not require cross‐linking the polymer brushes. The free‐standing film thicknesses of ≈16–75 nm are controlled by simply changing the ATRP reaction time. The results show that the free‐standing PHEMA brush film transferred onto a plate exhibits a relatively smooth surface and is stable in any solvent.

     

Copper immobilized onto polymer‐coated magnetic nanoparticles as recoverable catalyst for ‘click’ reaction

Copper supported on polymer‐coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, scanning and transmission electron microscopies, X‐ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer‐coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4‐disubstituted 1,2,3‐triazoles from corresponding halides, alkynes and sodium azide. The catalyst can be easily isolated from the reaction solution by applying an external magnet and reused for nine runs without any significant loss of catalytic activity.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Preparation and evaluation of open‐tubular capillary column combining a metal–organic framework and a brush‐shaped polymer for liquid chromatography

In this work, an open‐tubular capillary liquid‐phase column was prepared by modifying chain polymer on the inner surface of capillary and chemical bonding of metal organic frameworks, NH₂‐UiO‐66, to the brushes of chain polymer (poly(glycidyl methacrylate)). Besides advantages of facial preparation and good permeability, the chain polymer effectively increases the modification amount of NH₂‐UiO‐66 nanoparticles to increase the phase ratio of open‐tubular capillary column and enhance the interactions with analytes. The results of scanning electron microscope energy‐dispersive X‐ray spectra indicated that NH₂‐UiO‐66 nanoparticles were successfully bonded to the chain polymer. Because of the hydrophobic interaction and hydrogen bonding interaction between the analytes and the ligand of NH₂‐UiO‐66, different analytes were well separated on the NH₂‐UiO‐66‐modified poly(glycidyl methacrylate) capillary (1.12 m × 25 μm id × 365 μm od) with the high absolute column efficiency reaching 121 477 plates, benefiting from an open‐tubular column and low mass transfer resistance provided by polymer brush and metal–organic framework crystal. The relative standard deviations of the retention time for run‐to‐run, day‐to‐day, and column‐to‐column (n = 3) runs are below 4.28%, exhibiting good repeatability. Finally, the column was successfully applied to separation of flavonoids in licorice.     

Molecular Recognition‐Mediated Transformation of Single‐Chain Polymer Nanoparticles into Crosslinked Polymer Films

We describe single‐chain polymer nanoparticles (SCNPs) possessing intramolecular dynamic covalent crosslinks that can transform into polymer films through a molecular recognition‐mediated crosslinking process. The SCNPs utilise molecular recognition with surface‐immobilised proteins to concentrate upon a substrate, bringing the SCNPs into close spatial proximity with one another and allowing their dynamic covalent crosslinkers to undergo intra‐ to interpolymer chain crosslinking leading to the formation of polymeric film. SCNPs must possess both the capacity for specific molecular recognition and a dynamic nature to their intramolecular crosslinkers to form polymer films, and an investigation of the initial phase of film formation indicates it proceeds from features which form upon the surface then grow predominantly in the xy directions. This approach to polymer film formation presents a potential method to “wrap” surfaces displaying molecular recognition motifs—which could potentially include viral, cellular and bacterial surfaces or artificial surfaces displaying multivalent recognition motifs—within a layer of polymer film.     

Environment‐Adopting Surfaces with Reversibly Switchable Morphology

Two‐component polymer brushes (polystyrene and poly(2‐vinylpyridine)) were synthesized by grafting from the surface of Si‐wafers. The brushes are sensitive to the surrounding medium, and their morphology and composition of the top of a brush can be switched upon exposure to different solvents. Thus surface energetic states and roughness of the film can be precisely tuned.