Catalytic C?C,C?N,and C?O Ullmann‐Type Coupling Reactions

Copper‐catalyzed Ullmann condensations are key reactions for the formation of carbon–heteroatom and carbon–carbon bonds in organic synthesis. These reactions can lead to structural moieties that are prevalent in building blocks of active molecules in the life sciences and in many material precursors. An increasing number of publications have appeared concerning Ullmann‐type intermolecular reactions for the coupling of aryl and vinyl halides with N, O, and C nucleophiles, and this Minireview highlights recent and major developments in this topic since 2004.     

Amide‐Directed Tandem C?C/C?N Bond Formation through C?H Activation

The transformation of C? H bonds into other chemical bonds is of great significance in synthetic chemistry. C? H bond‐activation processes provide a straightforward and atom‐economic strategy for the construction of complex structures; as such, they have attracted widespread interest over the past decade. As a prevalent directing group in the field of C? H activation, the amide group not only offers excellent regiodirecting ability, but is also a potential C? N bond precursor. As a consequence, a variety of nitrogen‐containing heterocycles have been obtained by using these reactions. This Focus Review addresses the recent research into the amide‐directed tandem C? C/C? N bond‐formation process through C? H activation. The large body of research in this field over the past three years has established it as one of the most‐important topics in organic chemistry.     

Ethylenedithio?Tetrathiafulvalene?Helicenes: Electroactive Helical Precursors with Switchable Chiroptical Properties

Electroactive fused ethylenedithio? tetrathiafulvalene? [4]helicene and ‐[6]helicenes have been synthesized through a strategy that involved the preparation of 2,3‐dibromo‐helicene derivatives as intermediates. The dihedral angles between the terminal helicenes, as determined by single‐crystal X‐ray analysis, are 22.7° and 50.7° for the [4]helicene and [6]helicene, respectively. Their solid‐state architectures show interplay between S???S and π???π intermolecular interactions. The chiroptical properties of the enantiopure EDT? TTF? [6]helicene derivatives have been investigated and supported by TDDFT calculations. Remarkable redox switching of the circular dichroism (CD) signal between the neutral and radical‐cation species has been achieved.     

B?H,C?H,and B?C Bond Activation: The Role of Two Adjacent Agostic Interactions

Tuning the nature of the linker in a L∼BHR phosphinoborane compound led to the isolation of a ruthenium complex stabilized by two adjacent, δ‐C H and ε‐B_sp2 H, agostic interactions. Such a unique coordination mode stabilizes a 14‐electron “RuH₂P₂” fragment through connected σ‐bonds of different polarity, and affords selective B H, C H, and B C bond activation as illustrated by reactivity studies with H₂ and boranes.     

Oxindole Synthesis by Direct Coupling of C?H and C?H Centers

An sp ² /sp ³ get‐together : A novel and efficient method can be used to synthesize 3,3‐disubstitued oxindoles by the direct intramolecular oxidative coupling of an aryl C? H and a C? H center (see scheme; DMF=N,N‐dimethylformamide).

     

A theoretical investigation of Zn?Zn and Be?Be one electron bond

Attachment of one electron to 1,2-diBeX-benzene and 1,2-diZnX-benzene derivatives leads to the formation of stronger Be Be and Zn Zn interaction compared to the neutral one. This is reflected in the dramatic shortening of the Be Be and Zn Zn distance. The formation of these 2-center-1-electron bonds have also been confirmed by topological survey of electron density using quantum theory of atoms in molecules and electron localization function. The formation of these bonds is expected to render stability to these radical anions. These radical anions are stable toward electron detachment and computed bond dissociation energy values are also significant.     

Kinetics and modeling of the H2?O2?NOx system

The addition of NO (0 to 400ppm) to mixtures of H₂ (ca. 1%) and O₂ (0.7 to 22%) has been studied over the temperature range 700 to 825 K, in a flow reactor at atmospheric pressure. The overall effect of NO is to promote the oxidation of H₂ but high concentrations of O₂ actually inhibit the NO-promoted oxidation of H₂. A detailed kinetic mechanism has been constructed and found to describe the experimental observations. The promotion of the oxidation of H₂ arises through the catalytic cycle The ability of R.34 to reactivate chains normally terminated by the formation of HO₂ is a key feature of this system. The predictions are highly sensitive to the rate of the reaction R.5 and the rate constants for this reaction is the only adjustable parameter required in the model. The value of k_5,N2 found to describe all the results has an absolute uncertainty <35%. The uncertainty relative to other important rate constants in the H₂? O₂ system is less than 10%. © 1995 John Wiley & Sons, Inc.     

Revealing Unexpected Mechanisms for Nucleophilic Attack on S?S and Se?Se Bridges

The reactivity of disulfide and diselenide derivatives towards F^? and CN^? nucleophiles has been investigated by means of B3PW91/6‐311+G(2df,p) calculations. This theoretical survey shows that these processes, in contrast with the generally accepted view of disulfide and diselenide linkages, do not always lead to S? S or Se? Se bond cleavage. In fact, S? S or Se? Se bond fission is the most favorable process only when the substituents attached to the S or the Se atoms are not very electronegative. Highly electronegative substituents (X) strongly favor S? X bond fission. This significant difference in the observed reactivity patterns is directly related to the change in the nature of the LUMO orbital of the disulfide or diselenide derivative as the electronegativity of the substituents increases. For weakly electronegative substituents, the LUMO is a σ‐type S? S (or Se? Se) antibonding orbital, but as the electronegativity of the substituents increases the π‐type S? X antibonding orbital stabilizes and becomes the LUMO. The observed reactivity also changes with the nature of the nucleophile and with the S or Se atom that undergoes the nucleophilic attack in asymmetric disulfides and diselenides. The activation strain model provides interesting insights into these processes. There are significant similarities between the reactivity of disulfides and diselenides, although some dissimilarities are also observed, usually related to the different interaction energies between the fragments produced in the fragmentation process.     

Synthesis of Phospholipid?Ribavirin Conjugates

New conjugates of antiviral nucleoside Ribavirin (=1‐(β‐D ‐ribofuranosyl)‐1H‐1,2,4‐triazole‐3‐carboxamide; 1 ) with 1,2‐ and 1,3‐diacyl glycerophosphates have been synthesized by the phosphoramidite method. A combination of 2′,3′‐phenylboronate protecting group for the sugar moiety of the ribonucleoside 1 and 2‐cyanoethyl protection for the phosphate fragment ensured the preparation of the desired compounds with reasonable yields via a small number of synthetic steps.     

Modeling the H bond donor strength of ?OH, ?NH,and ?CH sites by local molecular parameters

A quantum chemical model is introduced to predict the H‐bond donor strength of monofunctional organic compounds from their ground‐state electronic properties. The model covers ? OH, ? NH, and ? CH as H‐bond donor sites and was calibrated with experimental values for the Abraham H‐bond donor strength parameter A using the ab initio and density functional theory levels HF/6‐31G** and B3LYP/6‐31G**. Starting with the Morokuma analysis of hydrogen bonding, the electrostatic (ES), polarizability (PL), and charge transfer (CT) components were quantified employing local molecular parameters. With hydrogen net atomic charges calculated from both natural population analysis and the ES potential scheme, the ES term turned out to provide only marginal contributions to the Abraham parameter A, except for weak hydrogen bonds associated with acidic ? CH sites. Accordingly, A is governed by PL and CT contributions. The PL component was characterized through a new measure of the local molecular hardness at hydrogen, η(H), which in turn was quantified through empirically defined site‐specific effective donor and acceptor energies, EE_occ and EE_vac. The latter parameter was also used to address the CT contribution to A. With an initial training set of 77 compounds, HF/6‐31G** yielded a squared correlation coefficient, r², of 0.91. Essentially identical statistics were achieved for a separate test set of 429 compounds and for the recalibrated model when using all 506 compounds. B3LYP/6‐31G** yielded slightly inferior statistics. The discussion includes subset statistics for compounds containing ? OH, ? NH, and active ? CH sites and a nonlinear model extension with slightly improved statistics (r² = 0.92). © 2008 Wiley Periodicals, Inc. J Comput Chem 2009     

Anodic film formation on binary Al?Mg and Al?Ti alloys in nitric acid

Nitric acid is commonly used for surface treatments of aluminium alloys. It is used to clean the surfaces after alkaline etching; it has application in chemical polishing and is also used for electrograining. The majority of these treatments undergo the application of anodic polarisation that results in formation of anodic oxide film. However, little is known about the behaviour of aluminium containing magnesium or titanium in solid solution under such conditions. To reveal the effects of magnesium and titanium alloying additions on anodic film formation in nitric acid, Al‐1800 ppm Mg and Al‐800 ppm Ti alloys were investigated. It was found that porous alumina film developed on the surfaces with reduced efficiency of 40%, due to the reactive nature of nitric acid to alumina. The presence of magnesium and titanium in aluminium had little influence on the efficiency of film growth, as confirmed by the relatively similar thicknesses of oxide formed on binary alloys and aluminium. However, incorporation of magnesium ions into the alumina film led to development of a high‐population density of localised voids near the alloy/film interface. An increased titanium content was found in the film regions close to the alloy/film interface, indicating its oxidation. Copyright © 2009 John Wiley & Sons, Ltd.     

P?N ligands in lanthanide chemistry

The coordination chemistry of inorganic amides in Group 3 and lanthanide chemistry is discussed. Three different ligand systems (phosphino‐amides, bis(phosphino)amides, and bis(phosphinimino)methanides) that consist of one or more P N units were used. In this series the steric demand of the ligands is increased in a stepwise fashion and the negative charge is delocalized over more atoms. These properties were used in the design of new lanthanide complexes. For all three compounds the synthesis of the alkali metal derivatives is reported first, followed by the reaction of the alkali metal salts with various lanthanide trichlorides. Further reactions of the obtained lanthanide complexes as well as their application as catalysts are discussed. Most of the reported complexes show a dynamic behavior in solution. In phosphinoamide and bis(phosphino)amide complexes, in which the phosphorus atom is in oxidation state +3, there is always a weak coordination of the phosphorus atom to the lanthanide atom observed. In bis(phosphinimino)methanide complexes, in which the phosphorus atom is in oxidation state +5, no such interaction is noticeable. Instead a weak coordination of the methine atom to the center metal can be seen in the solid state. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:514–520, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10096     

Luminescent Cyanoruthenate(II)?Diimine and Cyanoruthenium(II)?Diimine Complexes

To improve the emission and excited‐state properties of luminescent cyanometalates, new classes of highly solvatochromic luminescent cyanoruthenium(II) and cyanoruthenate(II) complexes of the general formulae [Ru(PR₃)₂(CN)₂($\widehat{NN}$ )] and K[Ru(PR₃)(CN)₃($\widehat{NN}$ )], respectively, were developed. These complexes could be readily synthesized through the ligand‐substitution reaction of K₂[Ru(CN)₄(PR₃)₂] with a diimine ligand. The geometrical isomerism of these complexes was characterized by using various spectroscopic techniques. Their photophysical properties, solvatochromism, and electrochemistry have also been investigated. Our detailed study showed that many of these complexes exhibited extremely environmentally sensitive emissions and significantly improved emission quantum efficiencies and lifetimes compared with the well‐studied tetracyanoruthenate systems.     

Visible light-mediated photocatalyzed synthesis of oxazole via intermolecular C?N and C?O bond formation

An efficient visible light-mediated, eosin Y-catalyzed synthesis of oxazole has been developed from benzil with primary amines, that providing a straightforward, green, and environmentally benign access to a wide variety of substituted oxazole-2-amines under mild reaction conditions.     

Manganese‐Catalyzed Dehydrogenative [4+2] Annulation of N?H Imines and Alkynes by C?H/N?H Activation

Described herein is a manganese‐catalyzed dehydrogenative [4+2] annulation of N H imines and alkynes, a reaction providing highly atom‐economical access to diverse isoquinolines. This transformation represents the first example of manganese‐catalyzed C H activation of imines; the stoichiometric variant of the cyclomanganation was reported in 1971. The redox neutral reaction produces H₂ as the major byproduct and eliminates the need for any oxidants, external ligands, or additives, thus standing out from known isoquinoline synthesis by transition‐metal‐catalyzed C H activation. Mechanistic studies revealed the five‐membered manganacycle and manganese hydride species as key reaction intermediates in the catalytic cycle.