Reverse atom transfer radical polymerization of methyl methacrylate initiated by p‐chlorobenzenediazonium tetrafluoroborate

The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004     

Effect of phenol and derivatives on atom transfer radical polymerization in the presence of air

The various phenolic compounds in conjunction with Cu(II) or Cu(I)‐N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) complexes are used to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate, styrene, and methyl acrylate in the presence of a limited amount of air at temperatures in the range of 80–110 °C. Meanwhile, an effort is directed toward the elucidation of the role of phenol and derivatives in ATRP catalyzed by Cu(II)/PMDETA. The catalytic sequence involves the formation of Cu(I) by electron transfer from phenol to Cu(II); Cu(I) so formed can then react in two distinctly different ways: with organic halide to form a propagating radical or with oxygen to form copper salt in its higher oxidation state; and regeneration of Cu(I) by excess phenol. Such regeneration of Cu(I) would be expected to lead to polymerization as a result of the consumption of oxygen and phenol as well. The phenols with electron releasing groups tended to increase the conversion of the polymerization. In this respect, sodium phenoxide, a more effective additive was found, whereas p‐nitro phenol was the least effective. The obtained polymers displayed the common features of a controlled polymerization such as molecular weight control and low polydispersity index value (M_w/M_n < 1.5). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 351–359, 2004     

Efficient Synthesis of Triarylamines Catalyzed by Copper(I) Diazabutadiene Complexes

Cuprous chloride was coordinated by diazabutadiene (DAB‐R) ligands to form Cu(I)‐(DAB‐R) complexes, most of which have a 1:1 ratio of Cu to DAB‐R as reported. In the case of a special DAB‐ⁱPP, N,N′‐bis(2,6‐diisopropylphenyl)‐1,4‐diaza‐1,3‐butadiene, an unexpected composition of complex was found with the formula Cu(I)Cl(DAB)₂. When employed as catalyst for triarylamine synthesis from the coupling of aryl halides with primary and secondary arylamines, the new Cu(I)‐(DAB‐ⁱPP) complex displayed high efficiency.     

Copper(II) chloride and bromide complexes with 2‐methyl‐2H‐tetrazol‐5‐amine: an X‐ray powder diffraction study

The complex catena‐poly[[dibromidocopper(II)]‐bis(μ‐2‐methyl‐2H‐tetrazol‐5‐amine)‐κ²N⁴:N⁵;κ²N⁵:N⁴], [CuBr₂(C₂H₅N₅)₂]_n, (I), and the isotypic chloride complex catena‐poly[[dichloridocopper(II)]‐bis(μ‐2‐methyl‐2H‐tetrazol‐5‐amine)‐κ²N⁴:N⁵;κ²N⁵:N⁴], [CuCl₂(C₂H₅N₅)₂]_n, (II), were investigated by X‐ray powder diffraction at room temperature. The crystal structure of (I) was solved by direct methods, while the Rietveld refinement of (II) started from the atomic coordinates of (I). In both structures, the Cu atoms lie on inversion centres, adopting a distorted octahedral coordination of two halogen atoms, two tetrazole N atoms and two 5‐amine group N atoms. Rather long Cu—N_amine bonds allow consideration of the amine group as semi‐coordinated. The compounds are one‐dimensional coordination polymers, formed as a result of 2‐methyl‐2H‐tetrazol‐5‐amine ligands bridging via a tetrazole N atom and the amine N atom. In the polymeric chains, adjacent Cu atoms are connected by two such bridges.     

The determinatin of purines in fresh and sea water by cathodic stripping voltammetry after complexation with copper(I)

Nanomolar levels of the purines, guanine, hypoxanthine, xanthine and adenine, in aqueous solution can be determined by cathodic stripping voltammetry (CSV). After the sample has been brought to pH 8.5 and made 150 nM with respect to copper(II), the Cu(I) complex of purine is adsorbed on a hanging mercury drop electrode. After depositionfor 60 s, sthe complex is stripped from the electrode and the peak current corresponding with the reduction of Cu(I) to Cu(O) is measured. The limits of detection are 0.2 nM for guanine, 0.3 nM for hypoxanthine and adenine, and 1.0nM for xanthine; these can be lowered further by extending the adsorption time prior to the scan.     

Atom transfer radical polymerization of methyl methacrylate at ambient temperature using soluble Cu(I) complex catalysts formed with mixed ligands of multidentate amines and halide ions

An Erratum has been published for this article in J Polym Sci Part A: Polym Chem (2004) 42(19) 5030 . The addition of soluble quaternaryammonium halides (QX) in catalytic amounts takes into solution CuX/pentamethyldiethylenetriamine (PMDETA) complex (X = Cl, Br) in methyl methacrylate (MMA). The soluble catalyst complex provided much better control of the polymerization of MMA at ambient temperature than did the insoluble catalyst formed in the absence of QX, with CuCl/PMDETA/Aliquat® 336 (AQCl) proving to be superior to the CuBr/PMDETA/Bu₄NBr catalyst system. The effect was independent of the size of the quaternaryammonium ion. Also, the presence of Cl in the catalyst–QX combination either as CuCl or as QCl was enough to give much better control than that provided by a wholly Br‐based system. Among the various initiators used, that is, ethyl 2‐bromoisobutyrate (EBiB), methyl 2‐bromopropionate (MBP), 1‐phenylethyl bromide (PEBr), and p‐toluenesulfonyl chloride (pTsCl), only EBiB gave a satisfactory result. With MBP and PEBr the initiation was slower than the propagation, whereas with pTsCl the initiation was very fast, so that instantaneous termination occurred. The living nature of the polymers was shown by block copolymer preparation. It has been suggested that some of the added halide ions entered into the coordination spheres of Cu(I) and Cu(II), leading to their improved solubility and stronger deactivation by the Cu(II) complex. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4132–4142, 2004     

High‐throughput experimentation in atom transfer radical polymerization: A general approach toward a directed design and understanding of optimal catalytic systems

High‐throughput experimentation (HTE) was successfully applied in atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) for the rapid screening and optimization of different reaction conditions. A library of 108 different reactions was designed for this purpose, which used four different initiators [ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, (1‐bromoethyl)benzene, and p‐toluenesulfonyl chloride], five metal salts (CuBr, CuCl, CuSCN, FeBr₂, and FeCl₂), and nine ligands (2,2′‐bipyridine and its derivatives). The optimal reaction conditions for Cu(I) halide, CuSCN, and Fe(II) halide‐mediated ATRP systems with 2,2′‐bipyridine and its 4,4′‐dialkyl‐substituted derivatives as ligands were determined. Cu(I)‐mediated systems were better controlled than Fe(II)‐mediated ones under the examined conditions. A bipyridine‐type ligand with a critical length of the substituted alkyl group (i.e., 4,4′‐dihexyl 2,2′‐bipyridine) exhibited the best performance in Cu(I)‐mediated systems, and p‐toluenesulfonyl chloride and ethyl 2‐bromoisobutyrate could effectively initiate Cu(I)‐mediated ATRP of MMA, resulting in polymers with low polydispersities in most cases. Besides, Cu(I) halide‐mediated ATRP with 4,5′‐dimethyl 2,2′‐bipyridine as the ligand and p‐toluenesulfonyl chloride as the initiator proved to be better controlled than those with 4,4′‐dimethyl 2,2′‐bipyridine as the ligand, and polymers with much lower polydispersities were obtained in the former cases. This successful HTE example opens up a way to significantly accelerate the development of new catalytic systems for ATRP and to improve the understanding of structure–property relationships of the reaction systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1876–1885, 2004     

Spontaneous Cu(I)Br–PMDETA‐mediated polymerization of isobornyl methacrylate in heterogeneous aqueous medium at ambient temperature

Isobornyl methacrylate (IBMA), a bulky hydrophobic methacrylate, undergoes very fast polymerization, in bulk, with Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/ethyl‐2‐bromoisobutyrate system, at ambient temperature. IBMA also undergoes a spontaneous initiator‐free polymerization, at ambient temperature, with Cu(I)Br/PMDETA catalytic system in dimethyl sulfoxide–water mixtures. The rate of the polymerization is seen to increase with the water content up to 80 mol % of water. A possible intervention of air in initiation is proposed. The active Cu(0) formed by the disproportionation of Cu(I) species in aqueous medium probably plays a vital role for a possible air‐initiation of IBMA via single electron transfer‐living radical polymerization (SET‐LRP) mechanism. A high tolerance level to water under SET‐LRP conditions is demonstrated. The poly(IBMA) samples obtained exhibit low molecular weight distributions (1.1–1.3). Similar behavior was not observed with other common methacrylates such as methyl methacrylate, t‐butyl methacrylate, cyclohexyl methacrylate, and benzyl methacrylate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Optimization of the synthesis of poly(octadecyl acrylate) by atom transfer radical polymerization and the preparation of all comblike amphiphilic diblock copolymers

The atom transfer radical polymerization of octadecyl acrylate (ODA) has been investigated and optimized to produce polymers with predetermined molecular weights and narrow polydispersities (<1.2). The poor solubility of the catalytic system formed with conventional ligands such as the N‐(n‐propyl)‐2‐pyridylmethanimine and 2,2′‐bipyridine with Cu(I)Br in nonpolar reaction conditions gave poor control over molecular weight characteristics in ODA polymerizations. The use of N‐(n‐octyl)‐2‐pyridylmethanimine in combination with Cu(I)Br yielded a more soluble catalyst that improved control over the polymerization. The products from the polymerizations were further improved when an initiator, octadecyl 2‐bromo‐2‐methyl‐propanoate, similar in structure to the monomer, was used. Together, these modifications produced polymerizations that showed true controlled character as well as products with predetermined molecular weights and narrow polydispersities. Diblock copolymers of PODA were prepared with methyl methacrylate (MMA) and olig(oethylene glycol) methyl ether methacrylate (OEGMA). The PODA‐block‐POEGMA copolymers are the first examples of all comblike amphiphilic block copolymers. One of PODA‐block‐POEGMA copolymer samples has been shown to self‐assemble as micelles in a dilute aqueous solution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1129–1143, 2005     

Ultrafast SET‐LRP of methyl acrylate at 25 °C in alcohols

Alcohols are known to promote the disproportionation of Cu(I)X species into nascent Cu(0) and Cu(II)X. Therefore, alcohols are expected to be excellent solvents that facilitate the single‐electron transfer mediated living radical polymerization (SET‐LRP) mediated by nascent Cu(0) species. This publication demonstrates the ultrafast SET‐LRP of methyl acrylate initiated with bis(2‐bromopropionyloxy)ethane and catalyzed by Cu(0)/Me₆‐TREN in methanol, ethanol, 1‐propanol, and tert‐butanol and in their mixture with water at 25 °C. The structural analysis of the resulting polymers by a combination of ¹H NMR and MALDI‐TOF MS demonstrates the synthesis of perfectly bifunctional α,ω‐dibromo poly(methyl acrylate)s by SET‐LRP in alcohols. Moreover, this work provides an expansion of the list of solvents available for SET‐LRP. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2745–2754, 2008     

Poly(acrylate‐b‐styrene‐b‐isobutylene‐b‐styrene‐b‐acrylate) Block Copolymers via Carbocationic and Atom Transfer Radical Polymerizations

A series of polyacrylate‐polystyrene‐polyisobutylene‐polystyrene‐polyacrylate (X‐PS‐PIB‐PS‐X) pentablock terpolymers (X=poly(methyl acrylate) (PMA), poly(butyl acrylate) (PBA), or poly(methyl methacrylate) (PMMA)) was prepared from poly (styrene‐b‐isobutylene‐b‐styrene) (PS‐PIB‐PS) block copolymers (BCPs) using either a Cu(I)Cl/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. The PS‐PIB‐PS BCPs were prepared by quasiliving carbocationic polymerization of isobutylene using a difunctional initiator, followed by the sequential addition of styrene, and were used as macroinitiators for the atom transfer radical polymerization (ATRP) of methyl acrylate (MA), n‐butyl acrylate (BA), or methyl methacrylate (MMA). The ATRP of MA and BA proceeded in a controlled fashion using either a Cu(I)Cl/PMDETA or Cu(I)Cl/Me₆TREN catalyst system, as evidenced by a linear increase in molecular weight with conversion and low PDIs. The polymerization of MMA was less controlled. ¹H‐NMR spectroscopy was used to elucidate pentablock copolymer structure and composition. The thermal stabilities of the pentablock copolymers were slightly less than the PS‐PIB‐PS macroinitiators due to the presence of polyacrylate or polymethacrylate outer block segments. DSC analysis of the pentablock copolymers showed a plurality of glass transition temperatures, indicating a phase separated material.     

Effect of variation of [PMDETA]0/[Cu(I)Br]0 ratio on atom transfer radical polymerization of n‐butyl acrylate

A kinetic study was conducted to examine the effect of varying the ratio of ligand to transition metal in a Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) catalyst system for atom transfer radical polymerization (ATRP) of n‐butyl acrylate (nBA) using methyl 2‐bromopropionate as the initiator. Experimental molecular weights were higher than theoretical when low molecular weight polymers were targeted at low ratios of [PMDETA]₀/[Cu(I)Br]₀ (< 1), indicating inefficient initiation/deactivation. A downward curvature in the plot of M_n versus conversion was observed at high monomer conversion when targeting high molecular weight polymers. This deviation became more significant when an excess of ligand was used, indicating a contribution of chain transfer to ligand. The maximum rate of polymerization was obtained at [PMDETA]₀/[Cu(I)Br]₀ ≈ 0.5 for bulk ATRP of nBA; however for polymerization in the presence of 10 vol% DMF, the maximum appeared at the ratio ≈ 1:1. Addition of acetone or DMF improved solubility of Cu(II) complex, which consequently improved the level of control over the polymerization at low ratios of [PMDETA]₀/[Cu(I)Br]₀, but also reduced the reaction rate. The polymerization rate increased with temperature, but at the expense of increased polydispersities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3285–3292, 2004     

Syntheses,Structures, and Properties of the Complexes [Ag(N∧S)n](X), N∧S = 1‐Methyl‐2‐(alkylthiomethyl)‐1H‐benzimidazoles,X = PF6 (n = 2) or PO2F2 (n = 1)

The complexes [Ag(η²‐N∧S)₂](PF₆), N∧S = 1‐methyl‐2‐(methylthiomethyl)‐1H‐benzimidazole, mmb (complex 1 ) or 1‐methyl‐2‐(tert‐butylthiomethyl)‐1H‐benzimidazole, mtb (complex 2 ), and [Ag(μ,η²‐mmb)(μ,η²‐O₂PF₂)] (complex 3 ) were synthesized and characterized by X‐ray crystallography. Long Ag–S (ca. 2.70 Å) and shorter Ag–N bonds (ca. 2.23 Å) are part of characteristically distorted tetrahedral coordination arrangements at the silver(I) ions in 1 and 2 . Unexpectedly, the comparison with the copper analogue [Cu(η²‐mmb)₂](PF₆) reveals a more tetrahedral and less linear coordination arrangement for the corresponding silver species. Compound 3 as obtained by hydrolysis of the PF₆ ion or by the use of AgPO₂F₂ exhibits bridging mmb and η²‐difluorophosphate ligands in a chain‐type structure.     

A Novel Self‐assembled Supramolecular Complex {[Cu(n) (en)2·H2O] [Cu(I)2(CN)4]}n with Honeycomb‐like Structure and Its Adsorption Properties

A novel supramolecular complex {[Cu(n)(en)₂·H₂O]·[Cu(I)₂(CN)₄]}_n (en = ethylenediamine), in which the cyanide‐bridged Cu(I) forms the honeycomb‐like skeleton host and the Cu(n) complex ion [Cu(en)₂·H₂O]²⁺ is encapsulated in the center of the channel cavity of the skeleton, was synthesized by two different methods. The complex was also characterized by elemental analysis, ICP analysis, IR spectra and thermal analysis. The adsorption and desorption studies of the complex indicate that H₂O and NH₃ can be desorbed and re‐adsorbed without collapse of the channel structure of the supramolecule.     

Synthesis of poly(2‐hydroxyethyl methacrylate) in protic media through atom transfer radical polymerization using activators generated by electron transfer

Atom transfer radical polymerization (ATRP) using activators generated by electron transfer (AGET) was investigated for the controlled polymerization of 2‐hydroxyethyl methacrylate (HEMA) in a protic solvent, a 3/2 (v/v) mixture of methyl ethyl ketone and methanol. The AGET process enabled ATRP to be started with an air‐stable Cu(II) complex that was reduced in situ by tin(II) 2‐ethylhexanoate. The reaction temperature, Cu catalysts with different ligands, and variation of the initial concentration ratio of HEMA to the initiator were examined for the synthesis of well‐controlled poly(2‐hydroxyethyl methacrylate) and a poly(methyl methacrylate)‐b‐poly(2‐hydroxyethyl methacrylate) block copolymer. The level of control in AGET ATRP was similar to that in normal ATRP in protic solvents, and this resulted in a linear increase in the molecular weight with the conversion and a narrow molecular weight distribution (weight‐average molecular weight/number‐average molecular weight < 1.3). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3787–3796, 2006     

Novel Benzyl‐ or 4‐Cyanobenzyl‐Substituted N‐Heterocyclic (Bromo)(carbene)silver(I) and (Carbene)(chloro)gold(I) Complexes: Synthesis and Preliminary Cytotoxicity Studies

N‐Heterocyclic carbene (NHC) complexes bromo(1,3‐dibenzyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene)silver(I) ( 2a ), bromo[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene]silver(I) ( 2b ), and bromo[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐benzimidazol‐2‐ylidene]silver(I) ( 2c ) were prepared by the reaction of 1,3‐dibenzyl‐1H‐imidazol‐3‐ium bromide ( 1a ), 3‐(4‐cyanobenzyl)‐1‐methyl‐1H‐imidazol‐3‐ium bromide ( 1b ), and 3‐(4‐cyanobenzyl)‐1‐methyl‐1H‐benzimidazol‐3‐ium bromide ( 1c ), respectively, with silver(I) oxide. NHC Complexes chloro(1,3‐dibenzyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene)gold(I) ( 3a ), chloro[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene]gold(I) ( 3b ), and chloro[1‐(4‐cyanobenzyl)‐3‐methyl‐1,3‐dihydro‐2H‐benzimidazol‐2‐ylidene]gold(I) ( 3c ) were prepared via transmetallation of corresponding (bromo)(NHC)silver(I) complexes with chloro(dimethylsulfido)gold(I). The complex 3a was characterized in two polymorphic forms by single‐crystal X‐ray diffraction showing two rotamers in the solid state. The cytotoxicities of all three bromo(NHC)silver(I) complexes and three (chloro)(NHC)gold(I) complexes were investigated through 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl‐2H‐tetrazolium bormide (MTT)‐based preliminary in vitro testing on the Caki‐1 cell line in order to determine their IC₅₀ values. (Bromo)(NHC)silver(I) complexes 2a – 2c and (chloro)(NHC)gold(I) complexes 3a – 3c were found to have IC₅₀ values of 27±2, 28±2, 34±6, 10±1, 12±5, and 12±3 μM , respectively, on the Caki‐1 cell line.     

The coordination chemistry of two symmetric double‐armed oxadiazole‐bridged organic ligands with copper salts

Two new symmetric double‐armed oxadiazole‐bridged ligands, 4‐methyl‐{5‐[5‐methyl‐2‐(pyridin‐3‐ylcarbonyloxy)phenyl]‐1,3,4‐oxadiazol‐2‐yl}phenyl pyridine‐3‐carboxylate (L1) and 4‐methyl‐{5‐[5‐methyl‐2‐(pyridin‐4‐ylcarbonyloxy)phenyl]‐1,3,4‐oxadiazol‐2‐yl}phenyl pyridine‐4‐carboxylate (L2), were prepared by the reaction of 2,5‐bis(2‐hydroxy‐5‐methylphenyl)‐1,3,4‐oxadiazole with nicotinoyl chloride and isonicotinoyl chloride, respectively. Ligand L1 can be used as an organic clip to bind Cu^II cations and generate a molecular complex, bis(4‐methyl‐{5‐[5‐methyl‐2‐(pyridin‐3‐ylcarbonyloxy)phenyl]‐1,3,4‐oxadiazol‐2‐yl}phenyl pyridine‐3‐carboxylate)bis(perchlorato)copper(II), [Cu(ClO₄)₂(C₂₈H₂₀N₄O₅)₂], (I). In compound (I), the Cu^II cation is located on an inversion centre and is hexacoordinated in a distorted octahedral geometry, with the pyridine N atoms of two L1 ligands in the equatorial positions and two weakly coordinating perchlorate counter‐ions in the axial positions. The two arms of the L1 ligands bend inward and converge at the Cu^II coordination point to give rise to a spirometallocycle. Ligand L2 binds Cu^I cations to generate a supramolecule, diacetonitriledi‐μ₃‐iodido‐di‐μ₂‐iodido‐bis(4‐methyl‐{5‐[5‐methyl‐2‐(pyridin‐4‐ylcarbonyloxy)phenyl]‐1,3,4‐oxadiazol‐2‐yl}phenyl pyridine‐4‐carboxylate)tetracopper(I), [Cu₄I₄(CH₃CN)₂(C₂₈H₂₀N₄O₅)₂], (II). The asymmetric unit of (II) indicates that it contains two Cu^I atoms, one L2 ligand, one acetonitrile ligand and two iodide ligands. Both of the Cu^I atoms are four‐coordinated in an approximately tetrahedral environment. The molecule is centrosymmetric and the four I atoms and four Cu^I atoms form a rope‐ladder‐type [Cu₄I₄] unit. Discrete units are linked into one‐dimensional chains through π–π interactions.     

The importance of the nature of initiator and solvent in atom transfer radical polymerization of methyl methacrylate catalyzed by copper(I) N‐alkyl‐2‐pyridylmethanimine complexes

The effect of the nature of initiator and solvent in atom transfer radical polymerization of methyl methacrylate (MMA) using N‐pentyl‐2‐pyridylmethanimine as the ligand in the presence of Cu(I)Br has been investigated. Under identical concentration and temperature conditions, p‐toluenesulfonyl chloride (p‐TsCl) in diphenyl ether gives polymerization rates identical to ethyl 2‐bromoisobutyrate in xylene. However, the former system induces better control of molecular weights and lower polydispersities.     

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.