Metabolic viability of Escherichia coli trapped by dielectrophoresis in microfluidics

The spatial and temporal control of biological species is essential in complex microfluidic biosystems. In addition, if the biological species is a cell, microfluidic handling must ensure that the cell's metabolic viability is maintained. The use of DEP for cell manipulation in microfluidics has many advantages because it is remote and fast, and the voltages required for cell trapping scale well with miniaturization. In this paper, the conditions for bacterial cell (Escherichia coli) trapping using a quadrupole electrode configuration in a PDMS microfluidic channel were developed both for stagnant and for in‐flow fluidic situations. The effect of the electrical conductivity of the fluid, the applied electric field and frequency, and the fluid‐flow velocity were studied. A dynamic exchange between captured and free‐flowing cells during DEP trapping was demonstrated. The metabolic activity of trapped cells was confirmed by using E. coli cells genetically engineered to express green fluorescent protein under the control of an inducible promoter. Noninduced cells trapped by negative DEP and positive DEP were able to express green fluorescent protein minutes after the inducer was inserted in the microchannel system immediately after DEP trapping. Longer times of trapping prior to exposure to the inducer indicated first a degradation of the cell metabolic activity and finally cell death.     

High-throughput dielectrophoretic manipulation of bioparticles within fluids through biocompatible three-dimensional microelectrode array

Dielectrophoresis (DEP) has been deemed as a potential and ideal solution for bioparticle manipulation. A 3-D carbon micro-electro-mechanical system (MEMS) fabricated from the latest developed carbon-MEMS approach has advantages of offering low-cost, biocompatible and high-throughput DEP manipulation for bioparticles. In this paper, a typical process for fabrication of various 3-D microelectrode configurations was demonstrated; accurate numerical analysis was presented on electric field gradient distribution and DEP force based on various microelectrode array configurations. The effects of electrode edge angle, electrode edge-to-edge spacing and electrode height on the electric field distributions were investigated, and optimal design considerations and rules were concluded through analysis of results. The outcomes demonstrate that the sharp edge electrode is more effective in DEP manipulation and both electrode edge-to-edge spacing and electrode height are critical design parameters for seeking optimal DEP manipulation. The gradient magnitude increases exponentially as the electrode spacing is reduced and the electric field extends significantly as the electrode height increases, both of which contribute to a higher throughput for DEP manipulation. These findings are consistent with experimental observations in the literature and will provide critical guidelines for optimal design of DEP devices with 3-D carbon-MEMS.     

Mapping alternating current electroosmotic flow at the dielectrophoresis crossover frequency of a colloidal probe

AC electroosmotic (ACEO) flow above the gap between coplanar electrodes is mapped by the measurement of Stokes forces on an optically trapped polystyrene colloidal particle. E²‐dependent forces on the probe particle are selected by amplitude modulation (AM) of the ACEO electric field (E) and lock‐in detection at twice the AM frequency. E²‐dependent DEP of the probe is eliminated by driving the ACEO at the probe's DEP crossover frequency. The location‐independent DEP crossover frequency is determined, in a separate experiment, as the limiting frequency of zero horizontal force as the probe is moved toward the midpoint between the electrodes. The ACEO velocity field, uncoupled from probe DEP effects, was mapped in the region 1–9 μm above a 28 μm gap between the electrodes. By use of variously sized probes, each at its DEP crossover frequency, the frequency dependence of the ACEO flow was determined at a point 3 μm above the electrode gap and 4 μm from an electrode tip. At this location the ACEO flow was maximal at ～117 kHz for a low salt solution. This optical trapping method, by eliminating DEP forces on the probe, provides unambiguous mapping of the ACEO velocity field.     

Multistep manipulations of poly(methyl‐methacrylate) submicron particles using dielectrophoresis

A microfluidic chip for multistep manipulations of PMMA submicron particles (PMMA‐SMPs) based on dielectrophoresis (DEP) has been developed that includes four main functions of focusing, guiding, trapping, and releasing the SMPs. The structure of the DEP chip consists of a top electrode made of indium tin oxide, a flow chamber formed by optically clear adhesive tape and bottom electrodes with different patterns for different purposes. The bottom electrodes can be divided into three parts: a fish‐bone‐type electrode array that provides the positive DEP force for focusing the suspended nanoparticles (NPs) near the inlet in the flow chamber; the second is for switching and guiding the focused NPs along the electrode surface to the target area, like a flow passing along a virtual channel; and a trapping electrode in the downstream for trapping and releasing the guided NPs. According to the simulation and experimental results, NPs can be aligned along the electrode of the focusing electrode and guided toward the target electrode by means of a positive DEP force between the top and bottom electrodes, with the effects of Brownian motion and Stokes force. In order to demonstrate the sequence of DEP manipulations, a PMMA‐NP suspension is introduced to the DEP chip; the size of the PMMA‐SMPs is about 300 nm. Furthermore, a LabVIEW program developed for sequence control of the AC signals for the multistep manipulations. Consequently, the DEP chip provides an excellent platform technology for the multistep manipulation of SMPs.     

Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet.     

Dielectrophoretic manipulation and separation of microparticles using curved microelectrodes

This paper presents the development and experimental analysis of a dielectrophoresis (DEP) system, which is used for the manipulation and separation of microparticles in liquid flow. The system is composed of arrays of microelectrodes integrated to a microchannel. Novel curved microelectrodes are symmetrically placed with respect to the centre of the microchannel with a minimum gap of 40 μm. Computational fluid dynamics method is utilised to characterise the DEP field and predict the dynamics of particles. The performance of the system is assessed with microspheres of 1, 5 and 12 μm diameters. When a high‐frequency potential is applied to microelectrodes a spatially varying electric field is induced in the microchannel, which creates the DEP force. Negative‐DEP behaviour is observed with particles being repelled from the microelectrodes. The particles of different dimensions experience different DEP forces and thus settle to separate equilibrium zones across the microchannel. Experiments demonstrate the capability of the system as a field flow fraction tool for sorting microparticles according to their dimensions and dielectric properties.     

Dielectrophoresis induced clustering regimes of viable yeast cells

We experimentally study the transient clustering behavior of viable yeast cells in a dilute suspension suddenly subjected to a nonuniform alternating current (AC) electric field of a microelectrode device. The frequency of the applied electric field is varied to identify two distinct regimes of positive dielectrophoresis. In both regimes, the yeast cells eventually cluster at electrodes' edges, but their transient behavior as well as their final arrangement is quite different. Specifically, when the frequency is much smaller than the cross-over frequency, the nearby yeast cells quickly rearrange in well-defined chains which then move toward the electrodes' edges and remain aligned as elongated chains at their final location. However, when the frequency is close to the cross-over frequency, cells move individually toward the regions of collection and simply agglomerate along the electrodes' edges. Our analysis shows that in the first regime both the dielectrophoretic (DEP) force and the mutual DEP force, which arises due to the electrostatic particle-particle interactions, are important. In the second regime, on the other hand, the DEP force dominates.     

Polarization behavior of polystyrene particles under direct current and low‐frequency (<1 kHz) electric fields in dielectrophoretic systems

The relative polarization behavior of micron and submicron polystyrene particles was investigated under direct current and very low frequency (<1 kHz) alternating current electric fields. Relative polarization of particles with respect to the suspending medium is expressed in terms of the Clausius–Mossotti factor, a parameter of crucial importance in dielectrophoretic‐based operations. Particle relative polarization was studied by employing insulator‐based dielectrophoretic (iDEP) devices. The effects of particle size, medium conductivity, and frequency (10–1000 Hz) of the applied electric potential on particle response were assessed through experiments and mathematical modeling with COMSOL Multiphysics^®. Particles of different sizes (100–1000 nm diameters) were introduced into iDEP devices fabricated from polydimethylsiloxane (PDMS) and their dielectrophoretic responses under direct and alternating current electric fields were recorded and analyzed in the form of images and videos. The results illustrated that particle polarizability and dielectrophoretic response depend greatly on particle size and the frequency of the electric field. Small particles tend to exhibit positive DEP at higher frequencies (200–1000 Hz), while large particles exhibit negative DEP at lower frequencies (20–200 Hz). These differences in relative polarization can be used for the design of iDEP‐based separations and analysis of particle mixtures.     

Rapid microparticle patterning by enhanced dielectrophoresis effect on a double-layer electrode substrate

We present a feasible dielectrophoresis (DEP) approach for rapid patterning of microparticles on a reusable double-layer electrode substrate in microfluidics. Simulation analysis demonstrated that the DEP force was dramatically enhanced by the induced electric field on top interdigitated electrodes. By adjusting electric field intensity through the bottom electrodes on thin glass substrate (100 μm), polystyrene particles (10 μm) were effectively patterned by top electrodes within several seconds (<5 s). The particle average velocity can reach a maximum value of about 20.0±3.0 μm/s at 1 MHz with the strongest DEP force of 1.68 pN. This approach implements integration of functional electrodes into one substrate and avoids direct electrical connection to biological objects, providing a potential lab-on-chip system for biological applications.     

Front Cover: Enhancement of dielectrophoresis-based particle collection from high conducting fluids due to partial electrode insulation

Dielectrophoresis (DEP) is a successful method to recover nanoparticles from different types of fluid. The DEP force acting on these particles is created by an electrode microarray that produces a nonuniform electric field. To apply DEP to a highly conducting biological fluid, a protective hydrogel coating over the metal electrodes is required to create a barrier between the electrode and the fluid. This protects the electrodes, reduces the electrolysis of water, and allows the electric field to penetrate into the fluid sample. We observed that the protective hydrogel layer can separate from the electrode and form a closed domed structure and that collection of 100 nm polystyrene beads increased when this occurred. To better understand this collection increase, we used COMSOL Multiphysics software to model the electric field in the presence of the dome filled with different materials ranging from low-conducting gas to high conducting phosphate-buffered saline fluids. The results suggest that as the electrical conductivity of the material inside the dome is reduced, the whole dome acts as an insulator which increases electric field intensity at the electrode edge. This increased intensity widens the high-intensity electric field factor zone resulting in increased collection. This informs how dome formation results in increased particle collection and provides insight into how the electric field can be intensified to the increase collection of particles. These results have important applications for increasing the recovery of biologically-derived nanoparticles from undiluted physiological fluids that have high conductance, including the collection of cancer-derived extracellular vesicles from plasma for liquid biopsy applications.     

AC dielectrophoretic deformable particle-particle interactions and their relative motions

This paper develops a numerical simulation model to research the deformable particle-particle interactions caused by dielectrophoresis (DEP) under AC electric fields. The DEP force is calculated by using Maxwell stress tensor method, and the hydrodynamic force is obtained by calculating the hydrodynamic stress tensor. Simulation results show that the DEP interactive motion will facilitate the particles forming particle chains that are parallel to the electric field, and the particles with low shear modulus present a lower x-component velocity. Also, the electric field intensity and particles radius have some effects on the DEP motions, and for different particles, smaller particles with larger electric field intensity easily reach a larger velocity. The numerical research may provide universal guidance for biological cells manipulation and assembly.     

Dielectrophoretic field‐flow fractionation of electroporated cells

We describe the development and testing of a setup that allows for DEP field‐flow fractionation (DEP‐FFF) of irreversibly electroporated, reversibly electroporated, and nonelectroporated cells based on their different polarizabilities. We first optimized the channel and electrode dimensions, flow rate, and electric field parameters for efficient DEP‐FFF separation of moderately heat‐treated CHO cells (50°C for 15 min) from untreated ones, with the former used as a uniform and stable model of electroporated cells. We then used CHO cells exposed to electric field pulses with amplitudes from 1200 to 2800 V/cm, yielding six groups containing various fractions of nonporated, reversibly porated, and irreversibly porated cells, testing their fractionation in the chamber. DEP‐FFF at 65 kHz resulted in distinctive flow rates for nonporated and each of the porated cell groups. At lower frequencies, the efficiency of fractionation deteriorated, while at higher frequencies the separation of individual elution profiles was further improved, but at the cost of cell flow rate slowdown in all the cell groups, implying undesired transition from negative into positive DEP, where the cells are pulled toward the electrodes. Our results demonstrate that fractionation of irreversibly electroporated, reversibly electroporated, and nonelectroporated cells is feasible at a properly selected frequency.     

Characterization of a hybrid dielectrophoresis and immunocapture microfluidic system for cancer cell capture

The capture of circulating tumor cells (CTCs) from cancer patient blood enables early clinical assessment as well as genetic and pharmacological evaluation of cancer and metastasis. Although there have been many microfluidic immunocapture and electrokinetic techniques developed for isolating rare cancer cells, these techniques are often limited by a capture performance tradeoff between high efficiency and high purity. We present the characterization of shear‐dependent cancer cell capture in a novel hybrid DEP–immunocapture system consisting of interdigitated electrodes fabricated in a Hele‐Shaw flow cell that was functionalized with a monoclonal antibody, J591, which is highly specific to prostate‐specific membrane antigen expressing prostate cancer cells. We measured the positive and negative DEP response of a prostate cancer cell line, LNCaP, as a function of applied electric field frequency, and showed that DEP can control capture performance by promoting or preventing cell interactions with immunocapture surfaces, depending on the sign and magnitude of the applied DEP force, as well as on the local shear stress experienced by cells flowing in the device. This work demonstrates that DEP and immunocapture techniques can work synergistically to improve cell capture performance, and it will aid in the design of future hybrid DEP–immunocapture systems for high‐efficiency CTC capture with enhanced purity.     

Dielectrophoresis microsystem with integrated flow cytometers for on-line monitoring of sorting efficiency

Dielectrophoresis (DEP) and flow cytometry are powerful technologies and widely applied in microfluidic systems for handling and measuring cells and particles. Here, we present a novel microchip with a DEP selective filter integrated with two microchip flow cytometers (FCs) for on-line monitoring of cell sorting processes. On the microchip, the DEP filter is integrated in a microfluidic channel network to sort yeast cells by positive DEP. The two FCs detection windows are set upstream and downstream of the DEP filter. When a cell passes through the detection windows, the light scattered by the cell is measured by integrated polymer optical elements (waveguide, lens, and fiber coupler). By comparing the cell counting rates measured by the two FCs, the collection efficiency of the DEP filter can be determined. The chips were used for quantitative determination of the effect of flow rate, applied voltage, conductivity of the sample, and frequency of the electric field on the sorting efficiency. A theoretical model for the capture efficiency was developed and a reasonable agreement with the experimental results observed. Viable and non-viable yeast cells showed different frequency dependencies and were sorted with high efficiency. At 2 MHz, more than 90% of the viable and less than 10% of the non-viable cells were captured on the DEP filter. The presented approach provides quantitative real-time data for sorting a large number of cells and will allow optimization of the conditions for, e.g., collecting cancer cells on a DEP filter while normal cells pass through the system. Furthermore, the microstructure is simple to fabricate and can easily be integrated with other microstructures for lab-on-a-chip applications.     

Size and medium conductivity dependence on dielectrophoretic behaviors of gas core poly‐l‐lysine shell nanoparticles

Dynamic (dis)assembly of biocompatible nanoparticles into 3D, packed structures would benefit drug delivery, films, and diagnostics. Dielectrophoretic (DEP) microdevices can rapidly assemble and manipulate polarizable particles within nonuniform electric fields. DEP has primarily discerned micrometer particles since nanoparticles experience smaller forces. This work examines conductivity and size DEP dependencies of previously unexplored spherical core‐shell nanoparticle (CSnp) into 3D particle assemblies. Poly‐l ‐lysine shell material was custom synthesized around a gas core to form CSnps. DEP frequencies from 1 kHz to 80 MHz at fixed 5 volts peak‐to‐peak and medium conductivities of 10^?5 and 10^?3 S/m were tested. DEP responses of ～220 and ～400 nm poly‐l ‐lysine CSnps were quantified via video intensity densitometry at the microdevice's quadrapole electrode center for negative DEP (nDEP) and adjacent to electrodes for positive DEP. Intensity densitometry was then translated into a relative DEP response curve. An unusual nDEP peak occurred at ～57 MHz with 25–80 times greater apparent nDEP force. All electrical circuit components were then impedance matched, which changed the observed response to weak positive DEP at low frequencies and consistently weak nDEP from ～100 kHz to 80 MHz. This impedance‐matched behavior agrees with conventional Clausius–Mossotti DEP signatures taking into account the gas core's contributions to the polarization mechanisms. This work describes a potential pitfall when conducting DEP at higher frequencies in microdevices and concurrently demonstrates nDEP behavior for a chemically and structurally distinct particle system. This work provides insight into organic shell material properties in nanostructures and strategies to facilitate dynamic nanoparticle assemblies.     

Breast cancer cell obatoclax response characterization using passivated‐electrode insulator‐based dielectrophoresis

Inherent electrical properties of cells can be beneficial to characterize different cell lines and their response to experimental drugs. This paper presents a novel method to characterize the response of breast cancer cells to drug stimuli through use of off‐chip passivated‐electrode insulator‐based dielectrophoresis (OπDEP) and the application of AC electric fields. This work is the first to demonstrate the ability of OπDEP to differentiate between two closely related breast cancer cell lines, LCC1 and LCC9 while assessing their drug sensitivity to an experimental anti‐cancer agent, Obatoclax. Although both cell lines are derivatives of estrogen‐responsive MCF‐7 breast cancer cells, growth of LCC1 is estrogen independent and anti‐estrogen responsive, while LCC9 is both estrogen‐independent and anti‐estrogen resistant. Under the same operating conditions, LCC1 and LCC9 had different DEP profiles. LCC1 cells had a trapping onset (crossover) frequency of 700 kHz and trapping efficiencies between 30–40%, while LCC9 cells had a lower crossover frequency (100 kHz) and showed higher trapping efficiencies of 40–60%. When exposed to the Obatoclax, both cell lines exhibited dose‐dependent shifts in DEP crossover frequency and trapping efficiency. Here, DEP results supplemented with cell morphology and proliferation assays help us to understand the response of these breast cancer cells to Obatoclax.     

Combined AC‐electrokinetic effects: Theoretical considerations on a three‐axial ellipsoidal model

AC fields induce charges at the structural interfaces of particles or biological cells. The interaction of these charges with the field generates frequency‐dependent forces that are the basis for AC‐electrokinetic effects such as dielectrophoresis (DEP), electrorotation (ROT), electro‐orientation, and electro‐deformation. The effects can be used for the manipulation or dielectric single‐particle spectroscopy. The observation of a particular effect depends on the spatial and temporal field distributions, as well as on the shape and the dielectric and viscoelastic properties of the object. Because the effects are not mutually independent, combined frequency spectra are obtained, for example, discontinuous DEP and ROT spectra with ranges separated by the reorientation of nonspherical objects in the linearly and circularly polarized DEP and ROT fields, respectively. As an example, the AC electrokinetic behavior of a three‐axial ellipsoidal single‐shell model with the geometry of chicken‐red blood cells is considered. The geometric and electric problems were separated using the influential‐radius approach. The obtained finite‐element model can be electrically interpreted by an RC model leading to an expression for the Clausius–Mossotti factor, which permits the derivation of force, torque, and orientation spectra, as well as of equations for the critical frequencies and force plateaus in DEP and of the characteristic frequencies and peak heights in ROT. Expressions for the orientation in linearly and circularly polarized fields, as well as for the reorientation frequencies were also derived. The considerations suggested that the simultaneous registration of various AC‐electrokinetic spectra is a step towards the dielectric fingerprinting of single objects.     

Parasitic trap cancellation using multiple frequency dielectrophoresis, demonstrated by loading cells into cages

This paper presents a method of using multiple frequencies to counteract electric field distortions that interfere with the dielectrophoretic (DEP) manipulation of particles or cells. To demonstrate the technique, simulations were performed for a scenario in which cells were to be loaded into a cage whose walls created parasitic trapping sites that prevented cells from entering it. By employing negative DEP on one electrode in conjunction with positive DEP on another, these traps could be almost completely cancelled. The model predictions were validated experimentally: multiple frequency DEP was used to load many cells into a cage in a matter of seconds in fluid flows of up to 300 microm s(-1), which could not be done with single frequency DEP. Actively cancelling field distortions permits the presence of features that would otherwise be prohibited near regions of dielectrophoretic manipulation, significantly expanding the environments in which dielectrophoresis can be used.     

阵列叉指式芯片研究细胞介电电泳富集过程

采用阵列叉指电极介电电泳(Dielectrophoresis,DEP)芯片,构建了集成DEP芯片分析和操控系统,应用Coventorware有限元分析软件模拟分析了芯片表面的电场分布情况;以红细胞和结肠癌细胞样品为分析对象,实现了两种细胞样品在芯片上的正负介电电泳定位富集.实验发现,交流信号幅值Vp-p是决定DEP富集效率的主因,交流信号频率f和缓冲溶液是改变细胞介电电泳类型的参量;在0.9% NaCl中,施加频率为10和3 MHz、电压5 V的交流频率,结肠癌细胞的正介电电泳(Positive-dielectrophoresis, pDEP)和负介电电泳(Nagetive-dielectrophoresis, nDEP)富集效率分别为87.2%和84.8%.     

Dielectrophoretic assembly of grain-boundary-free 2D colloidal single crystals

Dielectrophoresis (DEP) force-assisted assembly of a colloidal single photonic-crystal monolayer in a microfluidic chamber was demonstrated. Negative DEP force with a high-frequency AC electric field induced the compression of colloidal microspheres to form a colloidal crystal domain at the center of a hexapolar-shaped electrode. While typical assembly by monotonic DEP force forms multicrystalline domains containing crystal defects, repetitions of the DEP/relaxation cycle significantly facilitated crystal growth of 10μm monodispersed polystyrene microspheres, allowing a grain-boundary-free single-crystal monolayer domain of ca. 200μm in size. Microsphere size as well as size distribution affected the formation of the single-crystal domain. A simple method was used to immobilize the single-crystal domain on the glass substrate without losing its crystallinity.