Flow microcalorimetry and competitive liquid sorption II. Liquid sorption and wetting on macroreticular hydrophilic/hydrophobic networks

Three different types of polymer networks (polymer resins) were investigated by flow microcalorimetry and selective liquid sorption from 1-propanol(1)-water(2) mixtures. Type 1 network structure is formed by non-polar, non-swelling, macroporous resins (Amberlite XAD-2, Amberlite XAD-4). The composite isotherms for alcohol sorption were S-shaped. 1-Propanol is preferentially sorbed up to x₁≈0.5. Macroreticular non-ionic resins, Amberlite XAD-7 and XAD-8, represent the second type of polymer structure. These particles have a considerable extent of swelling in the binary liquid mixture and 1-propanol was preferentially sorbed by the polymer. The composite isotherms were U-shaped and exhibit maxima and minima. The third type of network structure is attached to macroreticular polar, hydrophilic ion-exchange resins (Chelite-S, Amberlyste A-21). Depending on the composition range of the binary liquid mixture, the resins may swell to a different extent and water is preferentially embeded in the porous polymer network. The swelling of the polymer networks was monitored by the gravimetric technique in separate experiments. The sorption capacity determined from the liquid uptake of the resins was related to the sorption capacity derived from the reduced surface excess. The enthalpy effect accompanying the sorption process was determined by flow and immersion microcalorimetry. The enthalpy of displacement isotherms reveals differences in polarity and swelling ability of the polymer network fairly well. Structural changes in the adsorption layers and formation of alcohol-water clusters on the surfaces play an important role.     

Pure hydrocarbon sorption properties of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and PTMSP/PPP blends

Propane and n-butane sorption in blends of poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-phenyl-1-propyne) (PPP) have been determined. Solubilities of propane and n-butane increased as the PTMSP content in the blends increased. This result is consistent with the higher free volume of PTMSP-rich blends and the better thermodynamic compatibility between PTMSP and these hydrocarbons. Propane and n-butane sorption isotherms were well described by the dual-mode model for sorption in glassy polymers. PTMSP/PPP blends are strongly phase-separated, heterogeneous materials. A noninteracting domain model developed for sorption in phase-separated glassy polymer blends suggests that sorption in the Henry's law regions (i.e., the equilibrium, dense phase of the blends) is consistent with the model. However, Langmuir capacity parameters in the blends are lower than predicted from the domain model, suggesting that the amount of nonequilibrium excess free volume associated with the Langmuir sites depends on blend composition. © 1996 John Wiley & Sons, Inc.     

Thermodynamics of water sorption in acrylic homonetworks and IPNs

The equilibrium thermodynamic properties of poly(hydroxyethyl acrylate) and poly(ethyl acrylate)-i-poly(hydroxyethyl acrylate) hydrogels are investigated starting from the water sorption isotherms of the systems. Partial enthalpy and entropy of the sorbed water in the gel differ markedly from the values of pure water at the lowest water contents, and tend to those of liquid water as saturation is approached. The residual mixing free energy is calculated, as a means of assessing the intensity of the water-polymer interaction. Its small positive magnitude shows that water-polymer hydrogen bonds are labile compared to water-water and polymer-polymer hydrogen bonds, and thus the stability of the gel state is still mainly due to the combinatorial entropic contribution to the mixing free energy. An equation correctly describing the sorption isotherms, when combined with the thermodynamic equations, can deliver the true water-polymer interaction parameter and its dependence on the polymer volume fraction in the gel.     

Sorption and diffusion of water in poly(vinylpyrrolidone)

The effect of molecular mass, thermal prehistory, physical state, and three-dimensional chemical crosslinked structure of a polymer on dissolution and diffusion in the PVP-water system has been studied. The kinetic dependences of sorption that correspond to the Fickian or pseudonormal type have been measured. In a certain concentration range, sorption is accompanied by transition of the system to the rubbery state. In the glassy state, the negative concentration dependence of the diffusion coefficient related to the nonequilibrium state of the polymer sorbent is observed. Sorption isotherms are described by S-shaped curves. It has been shown that the thermal prehistory of the polymer sorbent has the most pronounced effect on its sorption behavior. The effect of molecular mass is insignificant, while three-dimensional chemical crosslinks in PVP manifest themselves only in the region of the rubbery state. In accordance with the double sorption model, the experimental isotherms are represented as the superposition of two isotherms described by the Langmuir and Flory-Huggins equations. For the glassy state of the polymer sorbent, the degree of the nonequilibrium state has been estimated. With due regard for the excess free volume, the detailed thermodynamic analysis of isotherms has been performed; namely, the pair interaction parameters and the free energy of mixing have been calculated. The state of water in the polymer has been examined within the framework of hydrate contributions and clusterization theory.     

Sorption of methanol/MTBE and diffusion of methanol in 6FDA–ODA polyimide

This article discusses the diffusion and solubility behavior of methanol/methyl tert‐butyl ether (MTBE) in glassy 6FDA–ODA polyimide prepared from hexafluoroisopropylidene 2,2‐bis(phthalic anhydride) (6FDA) and oxydianiline (ODA). The diffusion coefficients and sorption isotherm of methanol vapor in 6FDA–ODA polyimide at various pressures and film thicknesses were obtained with a McBain‐type vapor sorption apparatus. Methanol/MTBE mixed‐liquid sorption isotherms were obtained by head‐space chromatography and compared with a pure methanol sorption isotherm obtained with a quartz spring balance. Methanol sorption isotherms obtained with the two methods were almost identical. Both methanol sorption isotherms obeyed the dual‐mode model at a lower activity, which is typical for glassy polymer behavior. The MTBE was readily sorbed into the polymer in the presence of methanol, but the MTBE sorption isotherm exhibited a highly nonideal behavior. The MTBE sorption levels were a strong function of the methanol sorption level. Methanol diffusion in the polymer was analyzed in terms of the partial immobilization model with model parameters obtained from average diffusion coefficients and the dual‐mode sorption parameters. Simple average diffusion coefficients were obtained from sorption kinetics experiments, whereas the dual‐mode sorption parameters were obtained from equilibrium methanol sorption experiments. An analysis of the mobility and solubility data for methanol indicated that methanol tends to form clusters at higher sorption levels. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2254–2267, 2000     

Gas permeability and hydrocarbon solubility of poly[1‐phenyl‐2‐[p‐(triisopropylsilyl)phenyl]acetylene]

The effects of film thickness, physical aging, and methanol conditioning on the solubility and transport properties of glassy poly[1‐phenyl‐2‐[p‐(triisopropylsilyl) phenyl]acetylene] are reported at 35 °C. In general, the gas permeability coefficients are very high, and this polymer is more permeable to larger hydrocarbons (e.g., C₃H₈ and C₄H₁₀) than to light gases such as H₂. The gas permeability and solubility coefficients are higher in as‐cast, unaged films than in as‐cast films aged at ambient conditions and increase to a maximum in both unaged and aged as‐cast films after methanol conditioning. For example, the oxygen permeability of a 20‐μm‐thick as‐cast film is initially 100 barrer and decreases to 40 barrer after aging for 1 week at ambient conditions. After methanol treatment, the oxygen permeabilities of unaged and aged films increase to 430 and 460 barrer, respectively. Thicker as‐cast films have higher gas permeabilities than thinner as‐cast films. Propane and n‐butane sorption isotherms suggest significant changes in the nonequilibrium excess free volume in these glassy polymer films due to processing history. For example, the nonequilibrium excess free volume estimated from the sorption data is similar for as‐cast, unaged samples and methanol‐conditioned samples; it is 100% higher in methanol‐conditioned films than in aged, as‐cast films. The sensitivity of permeability to processing history may be due in large measure to the influence of processing history on nonequilibrium excess free volume and free volume distribution. The propane and n‐butane diffusion coefficients are also sensitive to film processing history, presumably because of the dependence of diffusivity on free volume and free volume distribution. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1474–1484, 2000     

Sorption of small molecules in various polycarbonates and Kapton-H

Pressure-composition isotherms were determined at 20°C for CO₂ in Kapton and various substituted polycarbonates and for H₂O, Ar, N₂, CH₄, and acetone in bisphenol-A-polycarbonate. The isotherms are described by two parameters an average free energy of sorption and a width of a Gaussian distribution of free sorption energies. Within the framework of a recent model these parameters can be calculated assuming an elastic distortion of the polymer caused by the incorporation of solute atoms in preexisting holes. By comparing experimental values with predictions of the model the experimental width of the free energy distribution is only 30% smaller than the theoretical one. Functional relationships are obeyed between the sorption parameters on the one hand and glass transition temperature, average hole volume, and molecular volume of the solute on the other hand. Deviations occur for larger molecules like acetone and ethylene which are attributed to a viscoelastic distortion of the polymer. Comparing free energies of solution for the rubbery and glassy state of the polymer reveals more negative values for the glassy polymers despite their extra elastic distortion energy. This discrepancy is overcome by taking into account that the occupied volume has to be re-formed in the case of the rubbery or liquid polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 483–494, 1998     

Interval kinetic gravimetric sorption of acetone in random copolymers of poly(ethylene terephthalate) and poly(ethylene 2,6-naphthalate)

Interval sorption kinetics of acetone in solvent cast films of random poly(ethylene terephthalate)-co-(ethylene 2,6-naphthalate) (PET-co-PEN) are reported at 35°C and at acetone pressures ranging from 0 to 7.3 cm Hg. Polymer composition is varied systematically from 0% to 50% poly(ethylene 2,6-naphthalate). Equilibrium sorption is well described by the dual-mode sorption model. Interval sorption kinetics are described using a two-stage model that incorporates both Fickian diffusion and protracted polymer structural relaxation. The incorporation of low levels of PEN into PET significantly reduces the excess free volume associated with the glassy state and, for these interval acetone sorption experiments in ∼ 5 μm-thick films, decreases the fraction of acetone uptake controlled by penetrant-induced polymer structural relaxation. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2973–2984, 1999     

Network structure and plasticization of epoxy-based resins

The sorption behaviour of water molecules in epoxy-based thermosetting networks is discussed and related to the modifications of their properties. The hypothesized sorption modes and the corresponding mechanisms of plasticization are discussed on the basis of experimental vapor and liquid sorption tests, differential scanning calorimetry (DSC), thermomechanical analysis (TMA) studies, and dynamic mechanical analyses. Three modes of moisture sorption are assumed: increase in the free volume of the system, hydrogen bonding onto hydrophilic groups present in the network and adsorption onto the surfaces of “holes” which define the excess free volume of the glassy structure. The less stiff Diglycidyl ether of bisphenol-A (DGEBA) systems have no appreciable sorption via hydrogen bonding, but rather most of the moisture absorbed is due to the free volume increase and adsorption in the “holes”. On the other hand, the stiffer Tetraglycidyl Diaminodiphenyl Methane (TGDDM) systems absorb more moisture through significant hydrogen bonding rather than by the free volume increase. High plasticizations, evident as T_g depressions by 30 to 80°C, are possible being experimentally observed for the stiffer TGDDM resins. Relationships derived from the free volume theory or the classical thermodynamic treatment may be used to describe the dependence of T_g on the composition of miscible blends.     

Argon sorption and partial molar volume in poly(ethyl methacrylate) above and below the glass transition temperature

Sorption and dilation isotherms for argon in poly(ethyl methacrylate) (PEMA) are reported for pressures up to 50 atm over the temperature range 5–85°C. At temperatures below the glass transition (T_g=61°C), sorption isotherms are well described by the dual-mode sorption model; and isotherms above T_g follow Henry's law. However, isotherms for dilation due to sorption are linear in pressure at all temperatures over the range investigated. Partial molar volumes of Ar in PEMA are obtained from these isotherms. The volumes are approximately constant above T_g (about 40 cm³/mol), whereas the volumes below T_g are smaller and dependent on both temperature and concentration (19–26 cm³/mol). By analyzing the experimental data according to the dual-mode sorption and dilation model, the volume occupied by a dissolved Ar molecule and the mean size of microvoid in the glass are estimated to be 67 129 ų, respectively. The cohesive energy density of the polymer is also estimated as 61 cal/cm³ from the temperature dependence of the dual-mode parameters.     

Selective liquid sorption properties of hydrophobized graphite oxide nanostructures

 Hydrophilic graphite oxide (GO) of lamellar structure was prepared by oxidation of graphite; the thickness of the individual lamellae was 6.1 Å. GO was hydrophobized by n-alkylammonium cations, and the GO-organocomplex nanocomposites were swollen in organic solvents of various polarities (ethanol, toluene, cyclohexane, n-heptane) and their binary mixtures. The binary liquid composition determined the size (15–45 Å) of the lamellar GO nanostructures. Interlamellar swelling was quantitatively characterized by XRD experiments, determination of liquid sorption excess isotherms and flow microcalorimetry. Received: 12 November 1997 Accepted: 12 February 1998     

Solubility and diffusivity of methylmethacrylate and butylacrylate monomers in a MMA–BA copolymer

Mutual diffusion coefficients and sorption isotherms of methyl methacrylate (MMA) and butyl acrylate (BA) monomers in methyl methacrylate‐butyl acrylate copolymer (MMA‐BA) have been measured by gravimetric sorption. MMA is found to have higher solubility and diffusion rates in the copolymer than BA. Sorption data for MMA were interpreted using classical Flory‐Huggins thermodynamic theory with a constant interaction parameter (χ). A modified version of this theory has been applied to correlate the sorption data of BA, which exhibit a temperature and concentration‐dependent χ parameter. For MMA, the isotherm data reveal enhanced polymer‐solvent interactions with increasing temperature, while for BA the data indicate a drive toward phase separation with increasing temperature. Despite the difference in thermodynamic behavior, both monomers are found to exhibit Fickian diffusion and the diffusivity data are correlated reasonably well with the Vrentas‐Duda free volume theory. Some deviation between the free‐volume correlation and the experimental data is observed at the lowest temperature and BA concentration examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1996–2006, 2007     

Thermodynamics of Swelling of Poly(N-vinylpyrrolidone)-Poly(ethylene glycol) Complex Due to Water Sorption

The deformation of sorbent caused by the sorption is new method of quantitative investigation “in situ” of interaction in system host-quest. The deformation of PVP-PEG complex, ϕ_PEG=0.36 and ϕ_PEG=0.20 due to water sorption has been studied by the measuring of the relative elongation of the polymer samples and the isotherms of water sorption simultaneously. The investigation of the sorption deformation gives the possibility of direct estimation of polymer sample free volume and it's variation during sorption, also the variation of Gibbs energy of system due to sorption according to the vacancy solution theory. The glassy-plastic state transition of polymer during water sorption has been observed.     

High‐pressure sorption of carbon dioxide and methane in all‐aromatic poly(etherimide)‐based membranes

The sorption of compressed carbon dioxide and methane in a series of all‐aromatic poly(etherimide) (PEI) thin films is presented. The polymer films are derived from the reactions between an arylether diamine (P1) and four different dianhydrides [3,3′,4,4′‐oxydiphthalic dianhydride (ODPA), 3,3′,4,4′ biphenyltetra‐carboxylic dianhydride (BPDA), 3,3′,4,4′‐benzo‐phenonetetracarboxylic dianhydride (BTDA), and pyromellitic dianhydride (PMDA)] that have been selected to systematically change the flexibility of the polymer backbone, the segmental mobility, and the nonequilibrium excess free volume (EFV) of the polymer. The EFV, gas sorption capacities, and sorption‐ and temperature‐induced dynamic changes in film thickness and refractive index have been investigated by spectroscopic ellipsometry. The sorption capacity depends to a great extent on the PEI backbone composition. PMDA‐P1 shows the highest carbon dioxide sorption, combined with the lowest sorption selectivity because of the predominant sorption of methane in the EFV. For ODPA‐P1, the highest sorption selectivity is obtained, while it shows little long‐term relaxations at carbon dioxide pressures up to 25 bar. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 986–993     

Analysis of gas sorption in glassy polymers with the GAB model: An alternative to the dual mode sorption model

The suitability of the Guggenheim–Anderson–De Boer (GAB) model for the parameterization of gas sorption isotherms and their dependences on temperature is explored. The GAB model implies that molecules adsorb on inner surfaces of the polymer in multilayers, which contrasts with the assumptions of the classical Dual Mode Sorption (DMS) model which implies the simultaneous occurrence of Henry‐like dissolution and Langmuir's case I adsorption. The GAB model shows similar efficacy of the parameterization of the gas sorption isotherms in polymers as the DMS model. The isosteric heat of adsorption shows clear dependence on relative surface coverage for carbon dioxide sorption in cellulose acetate, polyethylene terephthalate, and the first polymer of intrinsic microporosity (PIM‐1), thus allowing for the occurrence of adsorption multilayers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1490–1495     

Gold sorption on weak base anion exchangers with aminoguanidyl groups

Two resins with different matrices, both bearing aminoguanidyl ligands, were obtained and used for gold sorption from hydrochloric acidic and from alkali solutions. Resin 1 was a aminoguanidine derivative of poly(acrylonitril-co-vinyl acetat-co-divinyl benzene) terpolymer (AN/VA/DVB), (67:27:10 wt.%), and Resin 2 the same derivative of gel expanded poly(vinylbenzyl chloride-co-divinylbenzene) copolymer (VBC/DVB). The resins sorption capacity and sorption isotherms of both resins were determined for AuCl₄⁻ and Au(CN)₂⁻ anions. Resin 2 revealed the best sorption of gold from acidic and alkali solutions: 68 and 23 mg/g, respectively. The effect of the HCl concentration on AuCl₄⁻ removal from solution was investigated. Gold was recovered quantitatively from both resins using a 5% thiourea solution in 0.1 HCl. Both resins remained ability of multiple gold sorption and desorption under acidic conditions.     

Water sorption and transport in a series of polysulfones

Water sorption and transport properties for a series of polysulfones are presented and interpreted in terms of the changes in the structure of the repeat unit compared to that of bisphenol A polysulfone. The differences between the sorption and diffusion of water and of permanent gases in these materials are also discussed. Water has the ability to interact with the polymer and with itself through hydrogen bonding in a way that permanent gases cannot. The equilibrium solubility of water in the polymer, unlike permanent gases, does not have a simple dependence on free volume but correlates more strongly with the frequency of hydrogen bonding sites on the polymer. Analysis of the sorption isotherms using the method of Zimm and Lundberg suggests that water molecules cluster in these polysulfones to various extents. For each polysulfone except polyethersulfone, the water diffusion coefficient decreases with increasing activity, which also suggests water clustering. For most of these materials, the water diffusion coefficient is larger than that of bisphenol A polysulfone and is directly related to the polymer free volume. Water permeability in these materials broadly correlates with the polymer free volume, but a favorable water-polymer interaction can be an overriding factor. © 1996 John Wiley & Sons, Inc.     

Dilation and plasticization of polystyrene by carbon dioxide

We have used an optical interference technique to measure the dilation of polystyrene films in the presence of carbon dioxide or helium at pressures up to 20 atm. Dilation isotherms (plots of dilation versus gas pressure at constant temperature) were obtained for three samples of polystyrene which had widely differing molecular weights. The dilation isotherms have the same general shape as sorption isotherms, which means that all of the sorbed gas molecules contribute to volume dilation and non can be thought of as occupying molecular-sized voids in the polymer. Using sorption results from the literature we show that the partial molar volume of CO₂ at 35°C is about 39 cm³ mol^?1 and appears to be independent of polystyrene molecular weight. For a polystyrene sample with M_n = 3600, the partial molar volume of sorbed CO₂ increases to 44 and 50 cm³ mol^?1 at 45 and 55°C, respectively. The sorption of CO₂ in polystyrene is shown to depress the glass transition temperature of the mixture, consistent with theoretical predictions. The shape of the dilation and sorption isotherms are consistent with the depression of the glass transition temperature.     

Application of thermodynamics in a specific force field to the adsorption of Al ions on the chelating resins Ostsorb Oxin, Ostsorb Salicyl, Spheron Oxin, and Spheron Salicyl: Mathematical analysis of sorption isotherms using nonlinear mean square software

The sorption mechanism of Al³⁺ on chelating resins by means of mathematical analysis of sorption isotherms using nonlinear mean square software was studied. This method should yield more detailed information than classical thermodynamics and should be more flexible than the statistical-mechanical method, so that it would make it possible to obtain fairly easily relations directly applicable in practice. This model defined the specific potential Φ_Al^R for the ion in a resin (which depends on properties of resin and ion). On the basis of this model, N and PO isotherms were derived. To study the sorption mechanism, the Freundlich, Langmuir, N and PO equations (models) of isotherms were used. It was estimated that the functional groups (8-hydroxyquinoline and salicylate) in the studied chelating resins influence Φ_Al^R and thus their mechanism and sorption capacity.     

Water sorption and transport in blends of poly(vinyl pyrrolidone) and polysulfone

Water sorption and transport properties for a series of miscible blends of hydrophobic bisphenol A polysulfone and hydrophilic poly(vinyl pyrrolidone) are reported. Study was restricted to blends that remained homogeneous after exposure to liquid water. The solubility of water in the blend films increased with increasing hydrophilic polymer content. Equilibrium sorption isotherms show dual-mode behavior at low activities and swelling behavior at high activities. The sorption kinetics are generally Fickian for blends containing 20% poly(vinyl pyrrolidone) or less, but exhibit two-stage behavior in blends containing 40% poly(vinyl pyrrolidone). Diffusion coefficients extrapolated to zero concentration decrease with increasing poly(vinyl pyrrolidone) content, owing to a decrease in the fractional free volume. However, the diffusion coefficient becomes a greater function of activity as the composition of hydrophilic polymer in the blend is increased, due to plasticization of the material by large levels of sorbed water. Permeability coefficients generally decrease with increasing poly(vinyl pyrrolidone) content for blends containing 20% poly(vinyl pyrrolidone) or less because the decrease in the diffusion coefficient is greater than the increase in the solubility coefficient. Blends containing 40% poly(vinyl pyrrolidone) have permeability coefficients greater than those of polysulfone due to high water solubility. The permeability coefficients depend on water concentration in approximately the same way for all blends. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 655–674, 1997