角谱衍射公式的快速傅里叶变换计算及在数字全息波面重建中的应用

从取样定理出发,对角谱衍射公式及逆运算的快速傅里叶变换(FFT)进行了研究.基于研究结果.讨论数字全息研究中物光通过一个光学系统到达CCD探测器的波面重建问题.提出物光场的逆运算追迹重建及像空间波面重建两种方法.最后,通过数字全息实验及波面重建计算,对两种波面重建方法的可行性作出证明.     

无零级衍射干扰的彩色数字全息研究

彩色数字全息研究中,用球面波为重建波及角谱衍射公式进行波前重建是一种有效的方法.然而,重建图像上通常伴有强烈的零级衍射干扰.本文通过理论分析,对波前重建过程作了重要改进.用改进后的方法进行彩色数字全息的实验研究表明,重建彩色图像的质量获得显著改善. 关键词： 彩色数字全息 波前重建 零级衍射干扰     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

高质量数字全息波面重建系统研究

基于阿贝成像理论对数字全息波面重建系统进行研究. 结果表明,利用成像系统对物光场进行变换,可以让物光场的高频角谱分量到达电荷耦合器件（CCD）探测器.为研究重建物光场质量,导出了CCD在光学系统后任意位置波面重建的计算公式,研究了物光通过傍轴光学系统到达CCD时波面重建系统的脉冲响应. 理论及实验研究表明,将CCD平面置于物光场像平面附近可以对物光场进行高质量重建. 关键词： 信息光学 数字全息 波面重建     

菲涅耳数字全息成像系统的脉冲响应分析

数字全息成像由CCD记录数字全息图后经过计算机数值重建物光波场,这个过程从傅里叶变换角度看等同于数字全息图的频谱分析。讨论了数字成像系统的脉冲响应函数,并分别推导了其实像、虚像、零级像在平面波和球面波照射下的波前复振幅分布。结果表明,实像和虚像是移位的夫琅和费衍射分布,而零级像是CCD光瞳的菲涅耳衍射分布,且与参考光波前分布无关。     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

菲涅尔数字全息的脉冲响应

数字全息是用CCD记录全息图并用计算机数值重建全息像的一种全息新方法.在数字全息中,通过对不同记录参数下记录的全息图的数值处理,可以消除零级光和共轭光,从而将数字全息系统看作是一个线性系统.本文依据全息理论和付里叶频谱分析,对菲涅尔数字全息系统的脉冲响应和分辨本领进行了理论分析.结果表明,在矩形等间隔抽样的情形下,菲涅尔数字全息的脉冲响应是由CCD有限大小的孔径衍射斑调制的矩形函数;菲涅尔数字全息的分辨率由CCD的孔径尺寸决定;由于CCD像素具有一定的大小,使得点光源的像发生弥散.     

两步相移数字全息物光重建误差分析与校正

系统研究了两步相移数字全息干涉术中相移误差引起的波前再现误差的计算和校正方法. 基于衍射物光相位分布的随机性和振幅相位的相互独立性原理,介绍了相移数字全息中物光波前再现误差的表达形式,推导出步长为π/2的两步算法中物光重建误差的表达式. 通过进一步分析这一重建误差的结构和特点,结合物光表达式,给出了自动校正相移误差引起的波前重建误差的校正方法. 该方法无需增加测量,在未知相移误差大小的情况下,只对标准两步相移算法恢复的物光复振幅进行处理就可以实现对物光振幅和相位的同时校正. 计算机模拟结果表明,校正后可将 关键词： 相移干涉术 数字全息 物光重建 误差校正     

彩色数字全息的非插值波面重建算法研究

彩色数字全息及多波长照明的数字全息检测研究中,避免插值误差的可变放大率波面重建是一个重要的研究内容.由于Fresnel衍射积分可以表示成Fourier变换及卷积两种形式,对应地存在两种波面重建算法：其一,将重建距离分为两段的衍射“接力”算法;其二,用球面波为重建波的卷积算法.文中对这两种算法进行理论分析及实验研究,讨论让重建计算满足取样定理的条件.结果表明,卷积算法较容易满足取样定理,能够获得较好的重建物光场. 关键词： 彩色数字全息 波面重建 衍射计算     

数字全息周期像的产生机理及在抑制零级衍射上的应用

在数字全息成像中, 利用CCD的RGB模式采样全息图时, 全息重构像会出现特定的周期性分布. 本文从理论和实验上详细研究了这种周期像产生的机理、分布特性和应用. 研究结果显示, 由于CCD的光谱滤镜会使全息图的RGB三个单色采样阵列出现部分像素信号的缺失, 因此, 需要通过特定的demosaicing数学算法对缺失的像素信号进行重建以形成完整的单色采样阵列, 这是数字全息再现像周期分布产生的根源. 而基于demosaicing算法的采样阵列重建会在全息图频谱中引入调制函数, 导致物体再现像和零级衍射斑的周期分布差异. 本文揭示了全息图的RGB采样、demosaicing算法与全息重构像周期性之间的内在关联. 最后, 讨论了结合空间移位和图像形态学技术, 利用重构像的周期性抑制零级衍射斑的应用. 所有理论与实验研究结果完全一致. 关键词： 数字全息 图像周期性 零级斑抑制     

球面参考光波数字全息的一些特点分析及实验

对以球面波作为参考光记录数字全息图的采样和再现分离条件进行了详细的分析。推导出了同时满足采样和再现分离条件时,CCD及物体的横向尺寸、物体及参考光源至CCD的距离之间需要满足的关系式,证明了完全散射物体上复振幅在记录面上的叠加可以等效为一个点光源在记录面上产生的效果,进行了相应的实验研究。结果表明：数字全息术中采用球面参考光波可以比采用平面参考光波更容易满足采样和分离条件,并可以记录到更多的物体信息;在物体至CCD的距离固定的情况下,无透镜傅里叶变换全息术是优化的记录光路结构;散射物体比衍射物体的数字全息图更容易满足采样和分离条件。     

Particle digital in-line holography with spherical wave recording

In this paper, we propose a method of digital in-line holography of particle. A diverging spherical beam is used for illumination in recording hologram, the complex amplitude distribution generated by particle field at a single plane located in the Fresnel diffraction region is recorded by CCD, and a plane beam for reconstructing hologram, then, the magnified image can be obtained by numerical reconstruction in computer. This procedure can be interpreted by Fourier optical theory and the theoretical analysis have been done in detail, the experimental results, the air freshener being subject, are also given.     

Design of the spatial filter window for digital holographic convolution reconstruction of object beam field

In the convolution reconstruction process of digital holographic object beam field, the object beam fields with different magnifications can be obtained when the reconstructing beams are spherical waves with different wave curvature radii. This paper presents a theoretical and experimental discussion on the useful spatial frequency spectrum of the hologram numerically illuminated by the spherical wave. The result shows that there would be an image in the spatial frequency spectrum of digital hologram, which is completely the same as the object, if the wave surface radius of the spherical wave is equal to the distance from the object to the CCD sensor. Taking this image as a reference and designing a filter, the position of the reconstructed images with different magnifications can be predicted correctly in the reconstructed plane. Additionally, since the spectrum distribution of zero-order diffraction can be forecasted accurately in theory, its contribution can be effectively eliminated through changing the spatial filter shape; then a reconstructed object field containing more high-frequency information can be obtained.     

一种消除数字离轴全息零级像的实验方法

提出一种消除数字离轴全息零级像的实验方法.这种方法是将全息衍射光栅作为分光元件,形成数字离轴全息记录系统,通过调节记录光路系统中平面镜,改变物光波到达CCD的入射方向而引入相移,从而得到不同记录参数的全息图.再通过对不同记录参数全息图的数字处理,即可达到零级像消除的目的,并对这种方法进行了理论分析和实验验证.给出了利用这种方法获得的实验结果.实验结果证明了该方案的可行性,并且具有光路系统简单、操作和处理容易等特点.     

Elimination of zero-order diffraction in digital off-axis holography

A simple experimental method of eliminating zero-order diffraction in the reconstructed image of off-axis digital holography is presented. Holographic diffraction grating acting as a beam splitter, an off-axis holography system is formed. The holograms of object with different recording parameters are obtained by adjusting the reflecting mirror in the recording optical system to vary the incidence orientation of the object beam in CCD to introduce a phase shift. The zero-order image can be eliminated by numerically processing the holograms of object with different recording parameters. The theoretical analyses have been done in detail and the experimental results are also given. The zero-order image eliminated, the area of reconstructed image increases remarkably, the image quality can then be significantly improved and the better resolution obtained. The experimental results show that the method presented in this paper is feasible, simple in optical system and easy in operation and data processing.     

Methods of Fourier optics in digital holographic microscopy

In this paper, processing methods of Fourier optics implemented in a digital holographic microscopy system are presented. The proposed methodology is based on the possibility of the digital holography in carrying out the whole reconstruction of the recorded wave front and consequently, the determination of the phase and intensity distribution in any arbitrary plane located between the object and the recording plane. In this way, in digital holographic microscopy the field produced by the objective lens can be reconstructed along its propagation, allowing the reconstruction of the back focal plane of the lens, so that the complex amplitudes of the Fraunhofer diffraction, or equivalently the Fourier transform, of the light distribution across the object can be known. The manipulation of Fourier transform plane makes possible the design of digital methods of optical processing and image analysis. The proposed method has a great practical utility and represents a powerful tool in image analysis and data processing. The theoretical aspects of the method are presented, and its validity has been demonstrated using computer generated holograms and images simulations of microscopic objects.     

点源参考光数字全息的频谱和记录能力分析

基于最高空间频率分析法,对点源参考光数字全息的空间频谱进行了分析,得出了使空间频谱分离的条件。结合全息成像系统的分辨率,推导出了同时满足采样和再现像分离的记录条件以及CCD对被记录物体的数据记录能力。结果表明,对给定的物体和CCD来说,采用点源参考光比采用平面参考光更容易满足采样和分离的条件,并可以记录到更多的物体信息,从而可使再现像获得更高的分辨率。     

Fresnel diffraction method with object wave rotation for numerical reconstruction of digital hologram on tilted plane

We present a new method for numerically reconstructing holography image on tilted planes within the Fresnel domain. The method is based on the Fresnel diffraction algorithm and object wave rotation transform. By suitable rotation the object wave on recording plane and once fast Fourier transformation this method can be implemented. The proposed method can render the real image of the hologram not only on parallel plane but also on the tilted. Experimental results are presented to demonstrate the method for a single axis rotation.     

A new method of aperture synthetizing in digital holography

This paper proposes a new method of aperture synthetizing in digital holography based on the principle of holography. In the new method aperture synthetizing is achieved by reconstructing each sub-hologram respectively, firstly, moving each reconstructed wave field referred to the benchmark reconstructed wave field according to the relationship between spacial motion and frequency shift, and finally splicing them by using superposition. Two different recording ways, using plane wave to record and using spherical wave to record, are analyzed, and their moving formula is deduced, too. Simulation and experiment are done. The results show that in comparison with the traditional method of aperture synthetizing in digital holography, the new method can decrease calculation and save reconstructed time obviously which has better applicability.