The role of substitution-induced micro-structural defects on the redox behavior and catalytic activity of LaxTh1−x(VO3−δ)4 mixed oxide catalysts

The catalytic properties and reduction behavior of mixed metal oxides with nominal compositions of La_xTh_1−x(VO_3−δ)₄, where 0.0 ≤ x ≤ 1.0, have been investigated as a function of the value of x. These compositions were synthesized by ceramic route and characterized using powder X-ray diffraction, differential thermal analysis, and temperature-programmed reduction/oxidation/desorption techniques. The substituted samples were comprised of two distinct phases, one corresponding to tetragonal thorium metavanadate with partial substitution at A-sites, i.e. La_xTh_1−x(VO_3−δ)₄, and the other a new phase identified as LaV₄O_11+δ. Both these phases exhibited considerable oxygen non-stoichiometry, depending upon the extent of substitution. Nevertheless, no significant change was observed in their respective crystal symmetry. Further, the substituted samples showed more reproducible redox behavior and also an improved catalytic activity for CO oxidation reaction. A definite correlation is found to exist between the micro-structural defects generated in the above-mentioned two phases because of the oxygen ion vacancies, resultant enhancement in thermal diffusitivity of lattice oxygen, and finally the catalytic activity of the substituted mixed oxides. It is envisaged that a kind of synergism between the micro-structural defects existing in the two inter-grown phases generated simultaneously during the synthesis may control the catalytic properties of composite metal oxide systems.     

The suppression of structural phase transformation in LaVO3 and La1−xSrxVO3 thin films fabricated by pulsed laser deposition

Highly oriented (100) thin films of LaVO₃ and La_1−xSr_xVO₃ have been fabricated by pulsed laser deposition in a reducing atmosphere. The films show a transition from insulating to metallic behaviour in the composition region of x, 0.175<x<0.200. In the single crystals of the antiferromagnetic insulating phase, a first-order structural phase transition is observed few degrees below the magnetic transition, which manifests itself as a kink in the temperature dependence of resistivity. In the highly oriented thin films of LaVO₃ and La_1−xSr_xVO₃ fabricated on lattice matched substrates in this study, the structural phase transformation in the insulating phase has been suppressed. The electrical conduction is found to take place via hopping through localized states at low temperatures. The metallic compositions show a non-linear (T^1.5) behaviour in the temperature dependence of resistivity. V (2p) core level spectra of these films show a gradual change in the relative intensities of V³⁺ and V⁴⁺ ions as the value of x increases.     

Electroresistance effect in La1−xCaxMnO3 (0<x<1) ceramics

Electroresistance (ER) effects were investigated for a full series of manganite ceramics La_1−xCa_xMnO₃ (0<x<1), synthesized by solid state reaction. The results indicate that while the ER effects are large only in the presence of electrically active, high E-field boundaries, the equilibrium or metastable electronic-magnetic states in the adjoining domains are also significant, as a large ER occurs only at x=0.51 and x=0.17; those compositions are both near a two-phase coexistence region, i.e. close to a compositional regime where equilibrium insulating/metallic phase domains and interfaces would occur spontaneously.     

Electronic excitations in hole-doped La1−xSrxMnO3 studied by resonant inelastic X-ray scattering

We report a resonant inelastic X-ray scattering (RIXS) study on perovskite manganese oxides La_1−xSr_xMnO₃ (x=0, 0.2, and 0.4) at Mn K-absorption edge. Hole-doping effect on the electronic excitations in the strongly correlated electron systems is elucidated by comparing with undoped LaMnO₃. The scattering spectra of metallic La_0.6Sr_0.4MnO₃ show that a salient peak appears in low energies indicating the persistence of the Mott gap. At the same time, the energy gap is partly filled by doping holes and the spectral weight shifts toward lower energies. Though the peak position of the excitations shows weak dispersion in momentum dependence, RIXS intensity changes as a function of the scattering angle (2θ), which is related to the anisotropy. Furthermore, anisotropic temperature dependence is observed in La_0.8Sr_0.2MnO₃ which shows a metal-insulator transition associated with a ferromagnetic transition. We consider that the anisotropy in the RIXS spectra is possibly attributed to the correlation of the orbital degrees of freedom. The anisotropy is large in LaMnO₃ with long-range orbital order, while it is small but finite in hole-doped La_1−xSr_xMnO₃ which indicates persistence of short-range orbital correlation.     

Superconductivity and magnetism of La2Cu1−xZnxO4+δ chemically oxidized by NaClO

The structural, superconducting and magnetic properties of La₂Cu_1−xZn_xO_4+δ (0≤x≤0.1) chemically oxidized by NaClO at room temperature were studied. All the samples before and after oxidation are single phase with orthorhombic structure, as indicated by their powder X-ray diffraction analysis. The iodometric titration results indicate that Zn-substituted La₂Cu_1−xZn_xO₄ is more favorable for the insertion of the excess oxygen, as compared to the Zn-free La₂CuO₄. The T_c suppression rate resulting from Zn substitution in La₂Cu_1−xZn_xO_4+δ is −12.4 K/%. The effective magnetic moment induced by the non-magnetic Zn ion is the order of one Bohr magneton, which decreases with increasing the Zn concentrations in the range examined. The latter two results are qualitatively well consistent with those obtained in La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping. This reveals that the non-magnetic Zn ions play the same role in both of the La₂Cu_1−xZn_xO_4+δ with the excess oxygen content of about 0.1 and the La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping.     

Highly cation-deficient manganese perovskite, La1−xMn1−yO3 with x=y

Oxidative (δ>0) nonstoichiometry in the perovskite ‘LaMnO_3+δ’ has been known to be manifested not with O interstitials but rather with cation vacancies of equal amounts at the two cation sites, La and Mn, i.e. La_1−xMn_1−yO₃ with x=y. Here, we report the fabrication of samples with record-high cation-vacancy concentrations (x>0.12 or δ>0.4) by means of a variety of high-pressure oxygenation techniques. Linear (negative) dependence of the cell volume on x was observed within the whole x range investigated, down to 56.9 Å³ (per formula unit) for a sample oxygenated at 5 GPa and 1100 °C using Ag₂O₂ as an excess oxygen source. With increasing degree of cation deficiency in La_1−xMn_1−xO₃, the ferromagnetic transition temperature was found to follow a bell shape with respect to x exhibiting a maximum of ∼250 K about x≈0.1. For moderately oxygenated samples large magnetoresistance effect was evidenced.     

EPR investigations of oxidation effects in (V1−xMox)2−δO3

Electron paramagnetic resonance (EPR) investigations has been carried out on the new family of molybdenum doped vanadium sesquioxides (V_1−xMo_x)_2−δO₃. The oxidation effects were monitored from the rate of paramagnetic V⁴⁺ created when the sample is exposed to the air. The effects of the oxidation time, sample temperature, and annealing at 1000 °C under a diluted hydrogen atmosphere on the EPR signal features are analyzed. The V⁴⁺ concentration in the oxidized samples is determined and the relaxation effects driven by the conduction electrons are pointed out from the thermal behaviour of the EPR line features. EPR spectra of all the oxidized samples also reveal a small ferromagnetic contribution strongly correlated with the V⁴⁺ content.     

Preparation of REFeAsO1−xFx (RE=Sm and Gd) superconductors at a relatively low temperature

A series of the SmFeAsO_1−xF_x and GdFeAsO_1−xF_x (x=0.05, 0.1, 0.15, 0.2, 0.25) samples have been prepared using nano-scaled ReF₃ as the fluorine resource at a relatively low temperature. The samples have been sintered at 1100 and 1120 °C for SmFeAsO_1−xF_x and GdFeAsO_1−xF_x, respectively. These temperatures are at least 50-60° lower than other previous reports. All of the so-prepared samples possess a tetragonal ZrCuSiAs-type structure. Dramatically supression of the lattice parameters and increase in T_c proved that this low temperature process was more effective to introduce fluorine into R_EFeAsO. Superconducting transition appeared at 39.5 K for SmFeAsO_1−xF_x with x=0.05 and at 22 K for GdFeAsO_1−xF_x with x=0.1. The highest T_c was detected to be 54 K in SmFeAsO_0.8F_0.2 and 40.2 K in GdFeAsO_0.75F_0.25. The use of the nano-scaled ReF₃ compounds has improved the efficiency of the present low temperature method in synthesizing the fluorine-doped iron-based superconductors.     

Magnetic phase diagram of double-layered La2−2xCa1+2xMn2O7 manganite

Double-layered manganite La_2−2xCa_1+2xMn₂O₇ have been synthesized for compositions ‘x’=0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 by solid state reaction method. From X-ray diffraction study, their crystal structures were found to be tetragonal perovskite with lattice parameters decreasing with increasing ‘x’. The decreasing lattice parameters affect the balance between in-plane, intra-bilayer and inter-bilayer exchange interactions, which is reflected on magnetotransport properties. The metal-to-insulator transition temperature is found to vary with composition and peaked around ‘x’=0.3. From ac-susceptibility study, 2D-ferromagnetic ordering was observed at higher temperatures for all compositions whereas 3D-ferromagnetic ordering was observed at quite low temperatures. In low-temperature region, decreasing susceptibility shows antiferromagnetic state for all compositions. On the basis of electrical and magnetic properties, a magnetic phase diagram is given.     

Electronic transport and magnetic studies of La1−xCax−0.08Sr0.04Ba0.04MnO3

Lanthanum based mixed valence manganite system La_1−xCa_x−0.08Sr_0.04Ba_0.04MnO₃ (LCSBMO; x=0.15, 0.24 and 0.33) synthesized through the sol-gel route is systematically investigated in this paper. The electronic transport and magnetic susceptibility properties are analyzed and compared, apart from the study of unit cell structure, microstructure and composition. Second order phase transition is observed in all the samples and significant difference is observed between the insulator to metal transition temperature (T_MI) and paramagnetic (PM) to ferromagnetic (FM) transition temperature (T_C). In contrast to the insulating FM behaviour usually observed in La_1−xCa_xMnO₃ (LCMO) for x=0.15, a clear insulator to metal transition is observed for LCSBMO for the same percentage of lanthanum. The temperature dependent resistivity of polycrystalline pellets, when obeying the well studied law ρ=ρ_o+ρ₂T² for T<T_MI, is observed to differ significantly in the values of ρ_o and ρ₂, with the electrical conductivity increasing with x. The variable range hopping model has been found to fit resistivity data better than the small polaron model for T>T_MI. AC magnetic susceptibility study of the polycrystalline powders of the manganite system shows the highest PM to FM transition of 285 K for x=0.33.     

La1−xCaxCoO3 perovskite-type oxides: Identification of the surface oxygen species by XPS

A detailed study of the La_1−xCa_xCoO₃ perovskites surface by XPS was carried out since this is a potentially useful tool to identify the oxygen species involved in the catalytic reaction and discriminate them. Mainly, the concentration of surface oxygen vacancies (λ′) can be estimated from the XPS atomic ratio.     

Structure and magnetic properties of Ca1−x−yMgxCu2+yO3 influenced by isoelectronic substitution x

Phases of the composition Ca_1−x−yMg_xCu_2+yO₃ have been prepared for the first time. The compounds are isostructural with the known end-members CaCu₂O₃ and MgCu₂O₃ showing a two-leg spin-ladder-like connection of copper and oxygen atoms within the Cu₂O₃-layer. Opposite the spin ladders this layer is folded, which results in a long-range antiferromagnetic ordering of these phases. The Néel temperature can be adapted by variation of x in Ca_1−x−yMg_xCu_2+yO₃ between 24 and 80 K. Several structural features, which influence the magnetic ordering, are discussed.     

The influence of microscopic parameters on the ionic conductivity of SrBi2(Nb1−xVx)2O9−δ(0≤x≤0.3) ceramics

Layered SrBi₂(Nb_1−xV_x)₂O_9−δ (SBVN) ceramics with x lying in the range 0-0.3 (30 mol%) were fabricated by the conventional sintering technique. The microstructural studies confirmed the truncating effect of V₂O₅ on the abnormal platy growth of SBN grains. The electrical conductivity studies were centred in the 573-823 K as the Curie temperature lies in this range. The concentration of mobile charge carriers (n), the diffusion constant (D₀) and the mean free path (a) were calculated by using Rice and Roth formalism. The conductivity parameters such as ion-hopping rate (ω_p) and the charge carrier concentration (K′) term have been calculated using Almond and West formalism. The aforementioned microscopic parameters were found to be V₂O₅ content dependent on SrBi₂(Nb_1−xV_x)₂O_9−δ ceramics.     

Evolution from relaxor-like dielectric to ferroelectric in Ba[(Fe0.5Nb0.5)1−xTix]O3 solid solutions

Ba[(Fe_0.5Nb_0.5)_1−xTi_x]O₃ (x=0.2,0.4,0.6,0.8,0.85,0.9 and 0.95) solid solutions were synthesized by a standard solid-state reaction technique. X-ray diffraction at room temperature and dielectric characteristics over a broad temperature and frequency range were evaluated systematically. The structure of Ba[(Fe_0.5Nb_0.5)_1−xTi_x]O₃ solid solutions changed from cubic to tetragonal with increasing x. A Debye-like dielectric relaxation following the Arrhenius law similar to that in Ba(Fe_0.5Nb_0.5)O₃ was observed at lower temperature in the composition range 0.2≤x≤0.8, while the relaxor ferroelectric, diffused ferroelectric and normal ferroelectric behavior were observed for x=0.85,0.9 and 0.95, respectively. The process of the evolution of relaxor-like dielectric to ferroelectric suggested the changing from dilute polar micro-domains to polar micro-domains, polar micro/macro-domains and then polar macro-domains in the present ceramics.     

Magnetic and transport properties of SmCoAsO1−xFx

A series of SmCoAsO_1−xF_x (with x=0, 0.05, 0.1, and 0.2) samples have been prepared by solid state reactions. X-ray powder diffraction proved that all samples can be indexed as a tetragonal ZrCuSiAs-type structure. A clear shrinkage of the lattice constants a and c with increasing F content indicated that F has been doped into the lattice. The magnetic and transport properties of the samples have been investigated. Parent SmCoAsO compound exhibited complicated magnetism including antiferromagnetism, ferromagnetism, and ferrimagnetism. For the fluorine doped samples, the antiferromagnetic Néel temperatures were almost independent of the F content and metamagnetic transitions were observed below antiferromagnetic Néel temperatures. With increasing F content, high temperature (below 142 K) ferrimagnetic state gradually changed to ferromagnetic state. In the resistivity result, metallic conduction in the region of 2-300 K and Fermi liquid behavior at low temperatures were shown in all samples. Transport properties at applied magnetic fields showed anomalies at low temperatures.     

Urbach rule and disordering processes in Cu6P(S1−xSex)5Br1−yIy superionic conductors

Compositional behavior of Urbach absorption edge is studied as well as the effect of compositional disordering on the parameters of exciton-phonon interaction, phase transition temperatures and electric conductivity in Cu₆P(S_1−xSe_x)₅Br_1−yI_y superionic solid solutions. The effect of different types of disordering on the optical absorption processes and specific features of compositional changes in the absorption edge spectra under S→Se and Br→I anion substitution in the mixed crystals are investigated. (x, T) phase diagrams for Cu₆P(S_1−xSe_x)₅X (X=I, Br) solid solutions are studied.     

Phase transformation behavior and dielectric characteristics of BaTi1−x(Al1/2Nb1/2)xO3 (0.01≤x≤0.40) ceramics

Microstructure, phase transformation behavior and dielectric properties of BaTi_1−x(Al_1/2Nb_1/2)_xO₃ (0.01≤x≤0.40) ceramics were investigated. A high level of (Al_1/2Nb_1/2)⁴⁺ substitution for Ti⁴⁺ ions was not conducive to the stability of the perovskite structure and resulted in the formation of BaAl₂O₄. As x was increased, lattice constants and unit cell volume decreased, reached a minimum at x=0.10 and then increased. The BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics at room temperature experienced a transformation from ferroelectric to paraelectric phase with increasing (Al_1/2Nb_1/2)⁴⁺ concentration. Meanwhile, permittivity of the BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics was markedly reduced, while Q value was slightly increased. Frequency dispersion of dielectric peak was obviously increased as x was increased from 0.01 to 0.10. It is of great interest that a dielectric abnormity represented by a broad dielectric peak at 200-400 K was observed for the composition with x=0.40.     

The magnetism for NN AFM ground state in Fe-based superconductor: Sr1−xKxFe2As2

The crystal structure, magnetism properties, and density of states for FeAs layered compound SrFe₂As₂ have been investigated by using the density functional theory (DFT) method. The magnetism under a checkerboard nearest neighbor anti-ferromagnetic (NN AFM) and ferromagnetic (FM) order ground-state have been analyzed with substitution for Sr with K ion in Sr_1−xK_xFe₂As₂. The results indicate that the distortion of FeAs tetrahedrons is sensitive to the electron doping concentration. The system magnetism was suppressed by K doping in NN-AFM ground state instead of FM. The density of states at Fermi level N(E_F) under NN AFM ground state would be regarded as a driving force for the increased T_c of Sr_1−xK_xFe₂As₂ system as observed experimentally. Our calculation reflects that NN AFM type spin fluctuation may still exist in the Sr_1−xK_xFe₂As₂ system and it may be an origin of strong spin fluctuation in this system besides the spin density wave (SDW) states.     

Effect of a LaSrCoO3 buffer layer on Pb1 − xLaxTi1 − x/4O3 films studied by polarized Raman spectroscopy

A confocal Raman investigation of Pb_1 − xLa_xTi_1 − x/4O₃ (PLT) thin films grown by RF magnetron sputtering on PbO_x/Pt/Ti/SiO₂/Si substrates with an intermediate LaSrCoO₃ (LSCO) layer was performed. The influence of the LaSrCoO₃ buffer layer was analyzed taking advantage of the observed Raman spectral band variation, which varied according to different manufacturing procedures. In the presence of a LSCO layer, the A1(1TO) Raman mode, which was indicative of tetragonal distortion, was pronouncedly enhanced, and a slight deviation from the (0 0 1) plane of the film was observed from the angular dependence of the polarized Raman spectral intensity. Furthermore, the spectral band variation as well as the residual stress along the in-depth direction was measured in the film from cross-sectional spectral line scans. This latter measurement showed a relaxation of the lattice mismatch in the presence of LSCO and PbO layers.     

Chiral optical absorption bands in [ ]Cd1−x Mnx Ga2S4 semiconducting compound

[ ]Cd_1−x Mn_x Ga₂S₄ is a semimagnetic semiconductor and it has revealed an exceptional property namely ‘optical activity‘. Therefore, a spectroscopic investigation of chiral absorption bands has been carried out with the view to examine the role of d*-d states of manganese atoms. It has been found that inner transitions of Mn⁺⁺ dominate the spectral region with a special feature, indicating that these transitions show the presence of a substantial contribution from the magnetic dipole moment which rotates the electric vector of the incident polarized radiation. The origin is associated to the lack of a symmetry center caused by the ordered vacancies in this defect compound.