Metal ion complexation in acetonitrile by upper-rim allyl-substituted, di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺ on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes is investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, L, L1, and L2, which differ in having no, two and four allyl groups, respectively, on the upper rim of the calix[4]arene scaffold, are utilized for the spectrofluorimetric titration experiments in MeCN. On complexation by alkaline earth metal cations, the emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations and Pb²⁺ interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 99% quenching of the dansyl fluorescence.     

Metal ion complexation in acetonitrile by cone,di-ionised calix[4]arene-1,2-crown ethers with two pendant dansyl fluorophores

Four cone calix[4]arene-1,2-crown ethers each with two ionisable side arms containing dansyl groups are synthesised. The crown ether ring on the lower rim is varied from crown-4 to crown-5 with hydrogen or tert-butyl groups on the para position of the upper rim. Di(tetramethylammonium) salts of the di-ionised ligands are utilised for spectrofluorimetric titration experiments in MeCN. The influence of alkali metal, alkaline earth metal and selected transition and heavy metal (Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) cations on the spectroscopic properties of the two dansyl groups linked to the lower rim of the conformationally locked, di-ionised calix[4]arene-1,2-crown ether frameworks is investigated by emission spectrophotometry. All of the metal cations induce red shifts in the emission spectra of the di-ionised ligands. The metal cations produce enhancement or quenching of the fluorescence emissions. Changes in the fluorescence emission as a function of the metal cation identity, the lower rim crown ether ring size and the absence or presence of upper rim tert-butyl groups are investigated.     

Comparison of upper and lower rim-functionalized,di-ionizable calix[4]arene-crown-6 structural isomers in divalent metal ion extraction

Upper rim-functionalized, di-ionizable calix[4]arene-crown-6 ligands are synthesized and compared with structural isomers having the two acidic side arms attached to the lower rim. Solvent extractions of selected divalent metal cations (alkaline earth metal cations, Pb²⁺, and Hg²⁺) from aqueous solutions into chloroform by the upper and lower rim-functionalized, di-ionizable calix[4]arene-crown-6 isomers are utilized to assess the effects of this structural modification on metal ion complexation abilities of the ligands. The observed effects are compared with those reported for analogous di-ionizable calix[4]arene-crown-5 structural isomers.     

A New Fluorescent Chemosensor for Metal Ions Based upon 1,8‐Naphthalimide and 8‐Hydroxyquinoline

A new fluorescent chemosensor based upon 1,8‐naphthalimide and 8‐hydroxyquinoline was synthesized, and its fluorescent properties in the presence of different metal cations (Hg²⁺, Ag⁺, Zn²⁺, Fe²⁺, Cd²⁺, Pb²⁺, Ca²⁺, Cu²⁺, Mg²⁺, and Ba²⁺) were investigated. It displayed fluorescence quenching with some heavy and transition metal (HTM) ions, and the quenching strongly depended on the nature of HTM ions.     

Synthesis of calix[4]arene(amido)monocrowns and their photoresponsive derivatives

A series of new calix[4]arene(amido)mono-crown compounds have been synthesized through aminolysis of calix[4]arene esters and intramolecular cyclization of the intermediates. The title compounds were converted into their nitro and azo substituted derivatives to provide novel photoresponsive molecular receptors for transition metal ions. Single crystal X-ray analysis of calix[4]arene(ethyleneamido)mono-crown (2a) revealed that the compound is present in a cone conformation with an amido loop that caps the lower rim of calix[4]arene cavity to result in stacking along axis a and axis c to provide supramolecular aggregates in the solid state. Evaluation of synthesized macrocycles in the solution phase for recognition of transition metal cations (Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Pb²⁺, Hg⁺, Hg²⁺, Pd²⁺, and Pt²⁺) by UV-visible spectroscopy revealed that p-tert-butyl-calix[4]arene mono-(amidocrown) 1c selectively shows a blue shift at 38 nm on interaction with Hg⁺ ions.     

Selective and Sensitive Two New Macroacyclic Schiff base Fluorescent Turn-Off Receptors for Fe3+, DFT Calculation and Their Antibacterial Activity

Two new Macroacyclic Schiff base chemosensors (L₁ and L₂) were synthesized by the one pot condensation reaction of 2-[3-(2-formyl phenoxy)propoxy]benzaldehyde and aminophenol in a 1:2 molar ratio and were characterized by IR, NMR spectroscopy. Both Schiff bases displayed high selectivity and sensitivity towards Fe³⁺ over other metal ions in H₂O-DMF solution (Ag⁺,Cu²⁺, Ni²⁺, Zn²⁺, Mg⁺², Mn⁺², Pb⁺², Co⁺², Hg⁺², Cr⁺³, Na⁺, Ba⁺² and Cd²⁺) due to their structure including oxygen donor atoms. The test results showed fluorescence quenching of the fluorophores when Fe³⁺ was bound to the recognition units. From test results, a high selectivity for Fe³⁺ were discovered in this type of sensors, especially, the probe based on 2-aminophenol exhibited more significant quenching in fluorescence intensity compared with 4-aminophenol-based due to its rigidity structure. In addition, the structure of ligands and their antibacterial properties was investigated.     

Selective detection of phosphaphenanthrenecontaining luminophors with aggregation-induced emission enhancement to transition metal ions

Transition metal ions (Pb²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Ag⁺, Fe³⁺) in water are used to quench emission of 2-(6-oxido-6H-dibenz 〈c,e〉 〈1,2〉 oxaphosphorin-6-yl)-1,4-phenylene-bis(p-pentyloxylbenzoate)s (MD5) with aggregation-induced emission enhancement (AIEE) in water-acetonitrile (AN) mixture (80:20 by volume). Among all metal ions, Fe³⁺ exhibits the highest quenching efficiency on AIEE of MD5 even when the concentration of Fe³⁺ is lower than 1×10⁻⁶ mol/L. The quenching efficiency of Hg²⁺ is lower than that of Fe³⁺ at the same concentration, though MD5 is used to detect Hg²⁺ efficiently, too. To other metal ions, low quenching efficiency has few relations with a wider concentration range. The UV absorbance spectra show only red shift of absorbance wavelength in the presence of Hg²⁺ and Fe³⁺, which indicates a salt-induced Jaggregation. SEM photos reveal larger aggregation and morphological change of nanoparticles of MD5 in water containing Hg²⁺ and Fe³⁺, which reduce the surface area of MD5 emission for further aggregation. The selective quenching effect of transition metal ions to emission of MD5 has a potential application in chemical sensors of some metal ions.     

Synthesis, IR and NMR characterization and ion extraction properties of tetranonylcalix[4]resorcinol bearing acetylhydrazone groups

A series of new calix[4]resorcinarenes (rccc-isomer) and resorcinols functionalized by acetylhydrazone binding fragments have been synthesized. The IR and NMR data and stereochemical behaviour of hydrazones are reported and compared with the results of earlier investigations. The barriers of rotation of hydrazone fragments for some octahydrazone derivatives of calix[4]resorcinarenes and their resorcinol analogues have been determined by NMR-measurements. The complexing behaviour of bis- and octahydrazones has been studied by liquid-liquid extraction towards the s-metal ions (Li⁺, Na⁺, K⁺, Cs⁺ and Ca²⁺), p-metal ions (Pb²⁺), d-metal ions (Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺) and f-metal ions (La³⁺, Gd³⁺ and Lu³⁺). The stoichiometry of complexes and the extraction constants have been determined. It has been established that octahydrazones do not extract alkali metal cations but show excellent selectivity towards transition and soft heavy metal cations (especially Hg²⁺ or Pb²⁺).     

基于四丹磺酰胺杯[4]芳烃的汞离子荧光化学传感器

我们方便地合成了上沿修饰四丹磺酰胺基团的杯[4]芳烃衍生物1,发现该化合物在含50％水的乙腈中显示出对汞离子高选择性和灵敏性的识别作用,竞争实验表明多数金属离子对其检测干扰较小。机理研究结果表明荧光萃灭源于由丹磺酰胺基团到汞离子的光致电子转移过程。另外,通过研究1和1-Hg2+的荧光衰减实验,以及对比双丹磺酰胺杯[4]芳烃2和单丹磺酰胺杯[4]芳烃3对汞离子的识别作用,发现化合物1的四丹磺酰胺基团具有很好的预组织和协同作用。化合物1对汞离子的检测限为3.41×10-6 mol·L-1,这可以使1成为一个潜在的汞离子荧光化学传感器。     

A new fluorescent sensor bearing three dansyl fluorophores for highly sensitive and selective detection of mercury(II) ions

A novel fluorometric sensor bearing three dansyl moieties based on tris[2-(2-aminoethylthio)ethyl]amine was prepared by a simple approach using a conventional two-step synthesis. The sensor exhibits highly Hg²⁺-selective ON-OFF fluorescence quenching behavior in aqueous acetonitrile solutions and is shown to discriminate various competing metal ions, particularly Cu²⁺, Ag⁺, and Pb²⁺ as well as Ca²⁺, Cd²⁺, Co²⁺, Fe³⁺, Mn²⁺, Na⁺, Ni²⁺, and Zn²⁺, with a detection limit of 1.15 × 10⁻⁷ M or 23 ppb.     

新型经由三氮唑连接的含芘基团的杯[4]芳烃：对锌离子的比率荧光识别及其在组合逻辑门中的应用

通过“click”反应合成了两个新的由三氮唑连接的含芘的杯[4]芳烃。 化合物1含有两个芘单元,对Zn2+表现出比率荧光响应,且对Cu2+, Hg2+ 和 Pb2+表现出选择性的荧光淬灭;而化合物2只含一个芘单元,对铜离子有显著的荧光淬灭,对汞离子有中等程度的荧光淬灭。利用化合物1对锌离子和铜离子不同的荧光响应,设计了INH和NOR逻辑门。     

New fluorescent chemosensor for Zn2+ ions on the basis of 3,3′-bis(dipyrrolylmethene)

Luminescence study of the reaction of 3,3′-methanediylbis(2,4,7,8,9-pentamethyldipyrrolylmethene) (H₂L) with a number of metal salts showed that this compound is an efficient fluorescent chemosensor for Zn²⁺ ions in organic solvents. The selectivity and sensitivity of H2L were estimated in various solvents in the presence of other metal cations (Na⁺, Mg²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Hg²⁺, Pb²⁺).     

A new rhodamine-based fluorescent chemosensor for transition metal cations synthesized by one-step facile condensation

A new rhodamine-based fluorescent chemosensor (1) for transition metal cations was synthesized by one-step facile condensation of rhodamine B and 2-aminopyridine. Without metal cations, 1 is colorless and nonfluorescent, whereas addition of metal cations (Fe³⁺, Hg²⁺, Pb²⁺, and Fe²⁺) leads to an obvious color change to pink and an appearance of orange fluorescence.     

Synthesis and complexation study of calix[4]arene diamine derivative incorporated in a polymeric backbone with chiral monomers

The novel chiral polymeric compounds containing more than one calix[4]arene have been synthesized by reacting a new calix[4]arene diamine derivative with two chiral monomers. These newly prepared compounds were studied by extraction of toxic heavy metal (Cu²⁺, Co²⁺, Cd²⁺, Hg²⁺), silver and alkali metal (Na⁺, K⁺) cations from aqueous phase. It was observed that the resulting calixarene-based polymers have a good complexing ability towards silver, alkali metal and toxic heavy metal cations.     

Terpy(Pt–salphen)2 Switchable Luminescent Molecular Tweezers

The design and synthesis of switchable molecular tweezers based on a luminescent terpy(Pt‐salphen)₂ ( 1 ; terpy=terpyridine) complex is reported. Upon metal coordination, the tweezers can switch from an open “W”‐shaped conformation to a closed “U”‐shaped form that is adapted for selective recognition of cations. Closing of the tweezers by metal coordination (M=Zn²⁺, Cu²⁺, Pb²⁺, Fe²⁺, Hg²⁺) was monitored by ¹H NMR and/or UV/Vis titrations. During the titration, exclusive formation of the 1:1 complex [M( 1 )] was observed, without appearance of an intermediate 1:2 complex [M( 1 )₂]. The crystallographic structure of the 1:1 complex was obtained with Pb²⁺ and showed a distorted helical structure. Selective intercalation of Hg²⁺ cations by the closed “U” form was observed. The tweezers were reopened by selective metal decoordination of the terpyridine ligand by using tris(2‐aminoethyl)amine (tren) as a competitive ligand without modification of the Pt–salphen complex. Detailed photophysical studies were performed on the open and closed tweezers. Structured emission was observed in the open form from the Pt–salphen moieties, with a high quantum yield and a long lifetime. The emission is slightly modified upon closing with 1 equivalent of Zn²⁺ or Hg²⁺, whereas a dramatic quenching was obtained upon intercalation of additional Hg²⁺.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

Synthesis and applications of (5-substituted benzimidazolo)-benzo-15-crown-5 and 4,4′-bis-benzimidazolo-dibenzo-15-crown-5 for the colorimetric detection of Au3+

In the present work, we have reported the synthesis of benzimidazoles functionalized crown ether derivatives of 4-formyl benzo-15-crown-5/4,4′-diformyl dibenzo-15-crown-5 and substituted diamine pyridine using sulfamic acid as a catalyst in DMSO. These molecules are used for the colorimetric determination of Au³⁺ selectively among other metal cations such as Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Au³⁺ and Ag⁺ ions_.     

Lower-rim versus upper-rim functionalization in di-ionizable calix[4]arene-crown-5 isomers. Synthesis and divalent metal ion extraction

Two series of di-ionizable calix[4]arene-crown-5 isomers in the cone conformation are synthesized to probe the effect of the pendant acidic group location on their metal ion extraction properties. In one series, the ionizable groups are attached to the lower rim of the calix[4]arene scaffold, which orients them near the crown ether cavity. In the second series, the ionizable groups are connected to the upper rim positioning them away from the crown ether ring, but close to the hydrophobic pocket of the calix[4]arene unit. The metal ion extraction behaviors of the two series of ligands are compared in extractions of alkaline earth metal cations, Hg²⁺, and Pb²⁺.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Complexation of metal ions with the novel diazadithia crown ether carrying two anthryl pendants in acetonitrile–tetrahydrofuran

A new crown ether carrying two anthryl groups with nitrogen–sulfur donor atom was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–tetrahydofuran solution (1/1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺ and Hg²⁺. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cu²⁺and Hg²⁺cations. The presence of excess amounts of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. The ligand showed good sensitivity for Zn²⁺ with respect to other metal cations with linear range and detection limit of 1.4 × 10^?7 to 4.1 × 10^?6 M and 1.0 × 10^?8 M respectively.