Nonlinear Antiplane Deformation of an Elastic Body

The antiplane elastic deformation of a homogeneous isotropic prestretched cylindrical body is studied in a nonlinear formulation in actual–state variables under incompressibility conditions, the absence of volume forces, and under constant lateral loading along the generatrix. The boundary–value problem of axial displacement is obtained in Cartesian and complex variables and sufficient ellipticity conditions for this problem are indicated in terms of the elastic potential. The similarity to a plane vortex–free gas flow is established. The problem is solved for Mooney and Rivlin—Sonders materials simulating strong elastic deformations of rubber–like materials. Axisymmetric solutions are considered.     

Development of finite-amplitude two-dimensional and three-dimensional disturbances in jet flows

The laminar-turbulent transition zone is investigated for a broad class of jet flows. The problem is considered in terms of the inviscid model. The solution of the initial-boundary value problem for three-dimensional unsteady Euler equations is found by the Bubnov-Galerkin method using the generalized Rayleigh approach [1–4]. The occurrence, subsequent nonlinear evolution and interaction of two-dimensional wave disturbances are studied, together with their secondary instability with respect to three-dimensional disturbances.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 8–19, September–October, 1985.     

Quasi-three-dimensional calculation of flow in blade passages of turbines

The flow in turbomachines is currently calculated either on the basis of a single successive solution of an axisymmetric problem (see, for example, [1-A]) and the problem of flow past cascades of blades in a layer of variable thickness [1, 5], or by solution of a quasi-three-dimensional problem [6–8], or on the basis of three-dimensional models of the motion [9–11]. In this paper, we derive equations of a three-dimensional model of the flow of an ideal incompressible fluid for an arbitrary curvilinear system of coordinates based on averaging the equations of motion in the Gromek–Lamb form in the azimuthal direction; the pulsation terms are taken into account in the equations of the quasi-three-dimensional motion. An algorithm for numerical solution of the problem is described. The results of calculations are given and compared with experimental data for flows in the blade passages of an axial pump and a rotating-blade turbine. The obtained results are analyzed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 69–76, March–April, 1991.I thank A. I. Kuzin and A. V. Gol'din for supplying the results of the experimental investigations.     

Development of a two-dimensional turbulent jet in an infinite space

The second and third terms in the asymptotic expansion of the stream function in the nonsimilar problem of the development of a two-dimensional turbulent jet in an unbounded space are found in final form. Results of experimental investigations of free turbulent jets are cited, and the effect of the initial velocity profile on the aerodynamic characteristics of the jet is considered. The problem of the development of a two-dimensional turbulent jet in an unbounded space has been considered in [1–3]. The existing solution is similar, and is valid only at a sufficiently large distance from the slit. Allowance for the finite dimensions of the slit leads to a nonsimilar problem. The papers [4–6] are devoted to the experimental investigation of the free two-dimensional turbulent jet.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 137–142, July–August, 1971.     

Rolling of a Rigid Cylinder over a Half-Plane with Initial Stresses (Harmonic and Bartenev–Khazanovich Potentials)

An asymmetric quasistationary problem for a prestressed half-plane with harmonic and Bartenev–Khazanovich potentials is solved based of the linearized theory of elasticity. The Mehler–Fock integral transform is used to solve the differential equations that describe the stress–strain state of the half-plane. The dependences of the normal and tangential stresses and stress intensity factors on the elongation are plotted     

Mass transfer between bubbles and the continuous phase in a pseudofluidized layer

The problem of mass transfer between an isolated bubble and the continuous phase in a pseudofluidized layer is considered, when the rising velocity of the bubble exceeds the pseudofluidization rate. In this case the bubble with the surrounding region, a so-called two-phase system, is surrounded by a surface current impermeable to the liquid [1–3], and the problem reduces to determining the concentration field and the total flow on the material surface. The problem is solved for large and small Peclet numbers by a boundary layer diffusion method and by asymptotic expansion matching.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 42–49, July–August, 1973.     

Strain-induced passivity breakdown in corrosion crack initiation

Corrosion crack nucleation and growth are modelled as a moving boundary problem. The model incorporates three physical processes––dissolution, passivation and straining––into a continuum mechanical framework. The dissolution triggers surface advance; the passivation restrains the access of the environment to bare metal; the deformation causes for passivity breakdown. Plane cracks nucleating from surface pits in an elastic–plastic material body under fatigue load are considered. The problem is solved using a FEM program and a moving boundary tracking procedure. The model simulates how cracks form and grow in a single continuous course. The geometry of the developed cracks is found independent of the initial pit size. Plasticity is found to influence the curvature at the tip of the nucleated corrosion cracks. The most important evolution length parameter, the width of the corrosion crack, is found to depend on the size constraints of the tracking procedure. It is concluded that the model is deficient for determining all length scales observed in reality. Physical processes to be considered in an advanced model are proposed and discussed.     

The application of the projection method for constructing the shape of a body with minimum drag

The problem is considered of constructing a semi-infinite axisymmetric body with minimum drag in subsonic flow of an ideal gas. This problem is formulated as the problem of finite-dimensional minimization by prescribing the shape of the body in parametric form and applying the projection method for solving a flow problem.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 108–113, March–April, 1985.     

Supersonic gas flow over a semi-infinite plate with small harmonic spanwise disturbances

The method of matched asymptotic expansions is used to investigate the problem of supersonic perfect-gas flow over a semi-infinite surface with longitudinal ribbing formed by imposing small transverse harmonic perturbations on a flat plate. The ratio of the maximum amplitude of the surface perturbations to the thickness of the boundary layer is of the order of Re^–1/4. The problem is solved with allowance for four terms of the expansion.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.1, pp. 146–156, January–February, 1993.     

Determination of relative permeabilities in a three-phase flow in a porous medium

A study is made of the problem of determining the parameters of flow described by the Buckley-Leverett system of equations by using functions that admit direct measurement. The well-known solution to the analogous problem for two-phase flow [1–3] is generalized. In contrast to [4], the general case is considered, when the fractions of the phases in the flow and the phase permeabilities depend on two variables.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 187–189, September–October, 1984.The author wishes to thank B. V. Shalimov for his helpful advice.     

Plane problem of uniform flow of a two-layer fluid past a circular cylinder

An explicit solution is found for the problem of uniform horizontal flow of a two-layer fluid of infinite depth past a circular cylinder. The cylinder axis is perpendicular to the flow. The problem is solved within a linear formulation. The solution of the problem is expressed in the form of rapidly converging series with coefficients determined from a recurrence relation. The first seven terms of the series yield the values of the hydrodynamic loads with a relative accuracy of 10^–6. The results are in good agreement with the known values for similar problems in a homogeneous fluid. Tables of the lift and wave drag are given for homogeneous and two-layer fluids.Novosibirsk. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 91–97, January–February, 1996.     

Hydrodynamics in weak gravitational fields small oscillations of an ideal liquid in a cylindrical vessel

The problem of determining the frequencies and forms of small natural oscillations of an ideal liquid in a cylindrical vessel under conditions close to weightlessness is examined. It is assumed that a weak homogeneous gravitational field acts parallel to the vertical generatrix forming the cylinder. In contrast to [1], where only the first antisymmetric oscillation frequency is found for a semiinfinite cylindrical vessel, the frequencies of several axiosymmetric, antisymmetric, etc. oscillations are obtained as functions of the gravitational-field intensity and other parameters of the problem. The Ritz method is employed for two different variations of the problem, equivalent to that of oscillations of an ideal liquid under conditions of weightlessness [1–5].Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 3–13, March–April, 1973.     

Nonisothermal viscoplastic fluid flow through porous media

The Alishaev model [1] is extended to the case of nonisothermal flow. Neglecting conductive heat transfer, it is shown that for the model in question in the plane of the complex potential not only are the problems linear but the decoupling of the thermal and hydrodynamic problems is also allowed. The latter is reduced to a mixed problem for an analytic function. This makes it possible to use the wellknown methods and results of the theory of limiting equilibrium pillars for isothermal flow [2–5]. It is also established that the solutions of the unsteady problems tend asymptotically to the solutions of the corresponding steady-state problems and can be obtained from the latter by simpler conversion. The effectiveness of the approach proposed is illustrated with reference to the problem of a source-sink system [1–4].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 117–122, July–August, 1990.     

Numerical results for the conservation of energy of Maxwell media for the Rayleigh–Stokes problem

This publication continues our studies of analytical solutions of the Rayleigh–Stokes problem for Maxwell fluids [J. Zierep, C. Fetecau, Energetic balance for the Rayleigh–Stokes problem of a Maxwell fluid, Int. J. Eng. Sci. 45 (2007) 617–627]. We start from the Fourier sine transform. The numerical result is given and discussed for the velocity u, the power of the wall shear stresses L, the dissipation Φand the boundary layer thickness δ. These new results are important for nature and technology.     

Numerical Modeling of Unsteady Radiative–Convective Heat Transfer on a Flat–Plate Boundary Layer in a Selectively Emitting and Scattering Medium

A conjugation problem for radiative–convective heat transfer in a turbulent flow of a high–temperature gas—particle medium around a thermally thin plate is considered. The plate experiences intense heating from an outside source that emits radiation in a restricted spectral range. Unsteady temperature fields and heat–flux distributions along the plate are calculated. The results permit prediction of the effect of the type and concentration of particles on the dynamics of the thermal state of both the medium in the boundary layer and the plate itself under conditions of its outside heating by a high–temperature source of radiation.     

Impact of a figure of revolution in a stream of incompressible fluid with separation of a jet

The impact interaction of bodies with a fluid in a flow with jet separation has been considered in [1–3], for example. This investigation was in the two-dimensional formulation. The present paper considers the three-dimensional problem of impact of a figure of revolution in a stream of an ideal incompressible fluid with separation of a jet in accordance with Kirchhoff's scheme. A boundary-value problem is formulated for the impact flow potential and solved by the Green's function method. A method for constructing the Green's function is described. Expressions are given for the coefficients of the apparent masses. The results are given of computer calculations of these coefficients in the case of a cone using the flow geometry of the corresponding two-dimensional problem.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 176–180, November–December, 1980.     

First-order approximation in a steady fluid flow problem with surface forces taken into account

The plane problem of finding the shape of the free surface of an ideal incompressible fluid is considered for a fully developed discharge from an infinite layer through a point sink. The gravitational and surface stress forces are taken into account.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 166–169, November–December, 1974.The author thanks G. V. Shcherbina for formulation of the problem and valuable advice.     

Cavitation flow around a plate in a channel by a stream of heavy liquid

The nonlinear problem of cavitation flow around a plate by a stream of heavy liquid is investigated in precise formulation; the plate is located on the horizontal floor of a channel when the gravity vector is directed perpendicular to the wall of the channel. Two flow systems are considered-Ryabushinskii's and Kuznetsov's system [1]. This problem was investigated in linear formulation in [2], Similar problems were considered earlier in [3–7] for unrestricted flow. Below, on the basis of a method proposed by Birkhoff [8, 9], all the principal hydrodynamic and geometric characteristics are calculated for the problem being considered.Translated from Ivestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 3, pp. 3–9, May–June, 1973.     

Heat transfer associated with viscous two-dimensional channel flow in a transverse acoustic field

An analytic solution is proposed for the problem of the effect of a transverse resonant acoustic field on the heat transfer process in laminar two-dimensional channel flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 41–49, May–June, 1985.The author wishes to thank V. E. Nakoryakov for formulating the problem and discussing the results.     

Drag of porous cylinders in a viscous fluid at low reynolds numbers

The problem of flow past a permeable cylinder at low Reynolds numbers is of interest for the solution of a number of problems in chemical technology in, for example, the design of porous electrodes and porous catalysts and in the calculation of nonstationary filtration of aerosols by fibrous filters. In the present paper, we solve the problem of transverse flow of a viscous fluid past a continuous cylinder in a porous shell and, in particular, in the case of a porous cylinder under conditions of constrained flow (system of cylinders) and an isolated cylinder at arbitrary permeability. The analogous problem of Stokes flow past permeable spheres has been solved in a number of papers [1–3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 122–124, November–December, 1979.