Gaussian basis sets for transition metals of the second series

A Gaussian basis set consisting of (15s, 9p, 8d) Gaussian functions has been optimized for the transition metal atoms of the second series (fourth-row atoms).     

Basis sets for geometry optimizations of second-row transition metal inorganic and organometallic complexes

Modest-sized basis sets for the second-row transition metal atoms are developed for use in geometry optimization calculations. Our method is patterned after previous work on basis sets for first-row transition metal atoms. The basis sets are constructed from the minimal basis sets of Huzinaga and are augmented with a set of diffuse p and d functions. The exponents of these diffuse functions are chosen to minimize both the difference between the calculated and experimental equilibrium geometries and the total molecular energies for several second-row transition metal inorganic and organon etallic complexes. Slightly smaller basis sets, based on the same Huzinaga minimal sets but augmented with a set of diffuse s and p functions rather than diffuse p and d functions, are also presented. The performance of these basis sets is tested on a wide variety of second-row transition metal inorganic and organometallic complexes and is compared to pseudopotential basis sets incorporating effective core potentials.     

Gaussian basis sets for the fourth-row main group elements,In–Xe

Gaussian basis sets, consisting of 15 s-type, 11 p-type, and 6 d-type functions, for the fourth-row main group elements, In-Xe, are presented. In order to compare these basis sets with larger ones, calculations have been performed in I₂ and TeO₂.     

The hyperfine coupling constants of 19F: An ab initio MRD-CI basis set study

The isotropic (a_iso) and dipolar (A_dip) hyperfine coupling constants of ¹⁹F were obtained from MRD -CI wave functions using a variety of basis sets. In series I, increasing numbers of d functions were added to a 5s4p contracted Huzinaga/Dunning basis. In series II, the 5s3p basis set was uncontracted in several steps until 9s5p was reached, to which were added from one to three d-polarization functions. CI parameters (selection thresholds and the number of reference configurations) were also varied. A study of the R dependence of a_iso and A_dip was performed. The best values obtained at R_e are 260 G for a_iso and 308 G for A_dip, compared with experimental values of about 280 G for a_iso and 320 G for A_dip.     

Accurate atomic Gaussian basis functions for second-row atoms: Small split-valence 3-21SP and 4-22SP basis sets

Small split-valence Gaussian 3-21SP and 4-22SP basis sets, previously reported for the first-row atoms [Chem. Phys. Lett., 229 , 151 (1996)], have been extended for the second-row elements of the Periodic Table. The total energies of the ground states of the second-row atoms calculated with the new basis sets are significantly lower than those obtained with the well-known 3-21G (J. Am. Chem. Soc., 104 , 2797 (1982)] and 4-31G [J. Chem. Phys., 56 , 5255 (1972)] basis sets. This is because, as first noted in our previous work for first-row atoms, that the 3-21G and 4-31G basis sets only correspond to a local minimum of the Hartree–Fock energy functional, which is relatively far from its global minimum. The proposed basis sets have been tested by performing geometry optimizations and calculations of normal frequencies in the harmonic approximation of some diatomic and polyatomic molecules at the Hartree–Fock level. © 1997 John Wiley & Sons, Inc. J Comput Chem 18: 1200–1210     

Density matrix averaged atomic natural orbital (ANO) basis sets for correlated molecular wave functions

Generally contracted basis sets for the first row transition metal atoms Sc-Zn have been constructed using the atomic natural orbital (ANO) approach, with modifications for allowing symmetry breaking and state averaging. The ANOs are constructed by averaging over the three electronic configurationsd ⁿ ,d ^n–1 s, andd ^n–2 s ² for the neutral atom as well as the ground state for the cation and the ground state atom in an external electric field. The primitive sets are 21s15p10d6f4g. Contraction to 6s5p4d3f2g yields results that are virtually identical to those obtained with the corresponding uncontracted basis sets for the atomic properties, which they have been designed to reproduce. Slightly larger deviations are obtained with the 5s4p3d2f1g for the polarizability, while energetic properties still have only small errors. The design objective has been to describe the ionization potential, the polarizability and the valence spectrum as accurately as possible. The result is a set of well-balanced basis sets for molecular calculations, which can be used together with basis sets of the same quality for the first and second row atoms.     

Compact basis sets for LCAO-LSD calculations. Part I: Method and bases for Sc to Zn

A method for preparing compact orbital and auxiliary basis sets for LCAO-LSD calculations has been developed. The method has been applied to construct basis sets for first row transition metal atoms from Sc to Zn for the 3d^n?14s¹ and 3d^n?24s² configurations. The properties of different expansion patterns have been tested in atomic calculations for the chromium atom.     

Energy-adjustedab initio pseudopotentials for the second and third row transition elements

Summary Nonrelativistic and quasirelativisticab initio pseudopotentials substituting the M^(Z–28)+-core orbitals of the second row transition elements and the M^(Z–60)+-core orbitals of the third row transition elements, respectively, and optimized (8s7p6d)/[6s5p3d]-GTO valence basis sets for use in molecular calculations have been generated. Additionally, corresponding spin-orbit operators have also been derived. Atomic excitation and ionization energies from numerical HF as well as from SCF pseudopotential calculations using the derived basis sets differ in most cases by less than 0.1 eV from corresponding numerical all-electron results. Spin-orbit splittings for lowlying states are in reasonable agreement with corresponding all-electron Dirac-Fock (DF) results.     

Ab initio calculations on sulfur-containing compounds. I. Uniform quality basis sets for sulfur: Total energies and geometries of H2S

Uniform quality basis sets (UQ-NG ; N=3, 4, 5), with s = p and s ≠ p, and a 6-31 G^* basis set have been optimized for the sulfur atom. These uniform quality basis sets in their uncontracted and contracted forms were used, together with other basis sets reported in the literature (a total of 40 basis sets), to study their accuracy in predicting the bond length and bond angle of H₂S.     

Basis set quality versus size II. Approximate GTO wave functions for second row transition metal atoms

Basis sets ranging in size from (16, 10, 7) to (20, 14, 11) have been derived for the atoms Y–Cd. Separate sets represent the energy optimized wave functions for each of the s²dⁿ, s¹dⁿ⁺¹, and s⁰dⁿ⁺² configurations. The energies from the largest sets are within 3 mhartrees of the values obtained in numerical Hartree–Fock calculations. Reasonable Hartree–Fock s²dⁿ– s¹dⁿ⁺¹ and s²dⁿ– s⁰dⁿ⁺² excitation energies may be obtained either using the largest basis sets, or using d-orbitals optimized for the s⁰dⁿ⁺² configurations. The basis sets are slightly unbalanced in favor of the s-functions and in disfavor of the d-functions, but various alternative basis sets may be derived by combining parts of the five parent sets. The convergence of radial expectation values is discussed.     

On the additivity of basis set effects in some simple fluorine containing systems

The reactions F + H₂ → HF + H, HF → H + F, F → F⁺ + e^? and F + e^? → F^? were used as simple test cases to assess the additivity of basis set effects on reaction energetics computed at the MP4 level. The 6-31G and 6-311G basis sets were augmented with 1, 2, and 3 sets of polarization functions, higher angular momentum polarization functions, and diffuse functions (27 basis sets from 6-31Gd, p) to 6-31 ++ G(3df, 3pd) and likewise for the 6-311G series). For both series substantial nonadditivity was found between diffuse functions on the heavy atom and multiple polarization functions (e.g., 6-31 + G(3d, 3p) vs. 6-31 + G(d, p) and 6-31G(3d, 3p)). For the 6-311G series there is an extra nonadditivity between d functions on hydrogen and multiple polarization functions. Provided that these interactions are taken into account, the remaining basis set effects are additive to within ±0.5 kcal/mol for the reactions considered. Large basis set MP4 calculations can also be estimated to within ±0.5 kcal/mol using MP2 calculations, est. E_MP4(6-31 ++ G(3df, 3pd)) ≈ E_MP4(6-31G(d, p)) + E_MP2(6-31 ++ G(3df, 3pd)) – E_MP2(6-31G(d, p)) or E_MP4(6-31 + G(d, p) + E_MP2(6-31 ++ G(3df, 3pd)) – E_MP2(6-31 + G(d, p)) and likewise for the 6-311G series.     

Bond critical points in the electronic structures of binary hydrides

The bond critical points of the binary hydrides formed by the elements of the first two rows of the periodic table have been calculated. Particular attention has been paid to the basis-set dependence of the bond critical points at the experimental equilibrium geometries, or where necessary at model geometries. With the exception of H₂S, stepwise extension of the basis set leads to a smooth convergence of the bond critical points to a set of values which appear to converge to the Hartree–Fock limit. For H₂S it is shownb that the position of the bodn critical point is not only more sensitive to the presence of polarization functions in the basis set, but depends strongly on the orbital exponents of the polarization functions. Extensive optimizations of the exponents of the polarization functions have been carried out with the (12s9p/5s) basis set for second-row hydrides. The effects of contracting the Huzinaga basis sets have been examined.     

Spherically symmetric axial Gaussian lobe 3d and 4f orbitals

The axial Gaussian lobe orbital (AGLO ) representations of 3d and 4f orbitals proposed by LeRouzo and Silvi have been angularly optimized to ensure spherical symmetry of filled 3d and 4f shells. The functions have been tested on the hydrogen atom in the presence of high quality s and p basis sets and found to provide excellent minimal Gaussian representations of polarization functions. Exact orbital degeneracy is not obtained within each shell, however. Tabulated values are given to allow arbitrary scaling of the 3d and 4f lobe mimic orbitals.     

Ab initio studies on several species of the formula X3YO and X3YOH

Ab initio molecular orbital calculations using both minimal and extended basis sets have been applied to two isoelectronic sets of molecules. One set corresponds to the 18 electron species H₃NO, H₃CO^– and H₃COH while the second set contains the 42 electron fluorinated molecules F₃NO, F₃CO^– and F₃COH. The geometries of these molecules have been optimized, using both the minimal STO-3G and the extended 4-31G basis sets. These comparative calculations reveal that the 4-31G basis produced structural parameters in much better agreement with experiment. The effect of includingd-orbitals in the basis set was also investigated. For the fluorinated oxides it has been found that the optimized 4-31G structures were only slightly altered by the addition ofd-orbitals. For H₃NO, on the other hand, the inclusion ofd-orbitals considerably shortens the N-O bond distance. Both H₃NO and CF₃OH, which are unknown experimentally, are theoretically predicted to be capable of existence. The electronic structures of these molecules have also been examined using electronic partitioning according to the Mulliken scheme.