4H‐1‐Benzopyrans by a tandem SN2‐SNAr reaction

Treatment of 2‐fluoro‐5‐nitrobenzyl bromide with active methylene compounds in the presence of excess potassium carbonate in acetone leads to the formation of highly functionalized 4H‐1‐benzopyrans by a tandem S_N2‐S_NAr reaction sequence. The reaction works well with β‐keto esters, β‐keto sulfones, β‐keto phosphine oxides, β‐keto phosphonates and β‐keto nitriles. The reaction is simple to perform and affords products in 50‐92% yields.     

Simulation of Styrene Polymerization by Monomolecular and Bimolecular Nitroxide‐Mediated Radical Processes over a Range of Reaction Conditions

Simulations of polymerization rate, molecular weight development and evolution of the concentrations of species participating in the reaction mechanism over a range of operating conditions, and a parameter sensitivity analysis showing the effects of temperature, activation/deactivation equilibrium constant and initial concentrations of controller and initiator (if present) on these variables are presented for the nitroxide‐mediated radical polymerization of styrene. The simulations were performed with a computer program based on a detailed reaction mechanism. The simulated profiles of conversion, number average molecular weight ( ), and polydispersity agree well with experimental data. Previously unknown activation energies for reactions involved in the mechanism are estimated. The temperature dependence of the kinetic rate constants obtained in this study will be useful for future modeling and optimization studies.

     

Electron impact studies. CVII—Negative ion mass spectra of the oxime group. Monoximes derived from α-dicarbonyl systems

Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures.     

A Lipase‐Responsive Vehicle Using Amphipathic Polymer Synthesized with the Lipase as Catalyst

We describe an enzyme‐responsive polymeric vehicle, which is of great interest in controlled drug delivery, biosensing, and other related areas. The polymer synthesized using lipase as catalyst in DMSO has a favorable molecular structure that is quickly hydrolyzed by lipase in aqueous phase, and allows a fast release of encapsulated molecules.

     

Correlation between Conformational Parameters and Rheological Properties of Molten Syndiotactic Polypropylenes

Summary: New rheological results with molten polypropylenes of different degrees of syndiotacticity are presented. The temperature dependence of their dynamic viscoelastic functions is correlated with the characteristic ratio. Relaxation time and Newtonian viscosity values are plotted as a function of molecular weight. The very high values of both rheological parameters found for the most syndiotactic polypropylenes are explained considering the reptation model, which links conformational parameters with the viscoelastic response in the molten state.

Disengagement or reptation time as a function of molecular weight.     

Polymer/Laponite Composite Latexes: Particle Morphology,Film Microstructure,and Properties

Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.

     

Thermal decomposition of 3-chloro-3-trichloromethyldiazirine in solution

The thermal decomposition of 3-chloro-3-trichloromethyldizairine in carbon tetrachloride and iso-octane has been investigated over the temperature range 75–115°C. The products, tetrachloroethylene and nitrogen, are formed quantitatively by a first-order reaction which is probably unimolecular: The results yielded the following Arrhenius equations: .     

The loss of CH3⋅ from some unsaturated dithioesters

The mechanism for the loss of CH₃? (and C₂H₅?) from the molecular ions of some unsaturated dithioesters of the type with n=0, 1, 2, has been studied. Based on first field free region metastable ion characteristics it is proposed that 1,3-dithiolium type product ions are generated. Deuterium labelling experiments indicated that the molecular ions of the 2-alkenyl alkanedithioates undergo a rearrangement prior to fragmentation which resembles the [3,3]sigmatropic rearrangement in solution chemistry.     

Adapting Visual‐Analytical Tools for the Exploration of Structural and Dynamical Features of Polymer Conformations

Conformational analysis of macromolecular structures reveals interesting higher‐order spatial arrangements. Analyzing these features as a function of time provides insights into the dynamical behavior of these systems and the identification of relevant subdomains. We present some visual‐analytic methods that we devised to explore the spatial‐temporal properties from molecular dynamics simulation data. These methods automatically detect common features and connect them to properties of interest. These methods yield physical insights that are not easily obtainable with existing methods for particle simulation data, as illustrated for polyacetylene interacting with a carbon nanotube.

     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

A novel one‐pot oxidative deformylation of N‐formyldihydroquinolines employing ferric chloride hexahydrate. Synthesis of 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines

A novel versatile one‐pot oxidative deformylation approach has been developed to synthesize 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines from the corresponding N‐formyldihydroquinolines.     

Mass spectrometric studies of organophosphorus compounds: III—Remarkable migration of chalcogen on electron impact of organophosphorus compounds

The mass spectra of several dibenzo (d.f)-1,3,2,-dioxaphosphorepines of the type where X=0, S, Se and R=2,2′-biphenylylene, have been studied. Dibenzochalcogen ions [RX]⁺˙ stemming directly from [M]⁺˙ were observed with high intensities, indicating specific migration of X from phosphorus to carbon with simultaneous destruction of the dioxaphosphorepine ring. Simple cleavage of P? Y as usually observed in similar organophosphorus compounds is not a common process here.     

Prediction of Polymer Properties from their Structure by Recursive Neural Networks

Summary: We propose a new approach for predicting polymer properties from structured molecular representations based on recursive neural networks. To this aim, a structured representation is designed for the modeling of polymer structures. This representation can also account for average macromolecule characteristics. Preliminarily, this model is applied to the calculation of the T_g of (meth)acrylic polymers with different stereoregularity.

Representation of poly(methyl methacrylate) as a chemical tree and unfolding of the encoding process through its structure.     

Frozen‐In Magnetic Order in Uniaxial Magnetic Gels: Preparation and Physical Properties

We describe the preparation and characterization of uniaxial magnetic gels. Fibril formation of the embedded magnetic particles generates easily detectable magnetic and optical anisotropies. A finite magnetization is frozen‐in and leads to a ferromagnetic‐like response in small homogeneous external magnetic fields. We present, for the first time, frequency dependent measurements of the shear modulus G′. Despite their optical and magnetic anisotropy, the gels are mechanically isotropic.

The time‐dependent G′ for a ferrogel in the parallel orientation in a homogeneous field of 200 mT.     

Thermal decomposition of 1,1,2,2-tetramethylcyclopropane in a single-pulse shock tube

1,1,2,2-Tetramethylcyclopropane (TTMC) has been decomposed in a single-pulse shock tube. The main reaction process is Side reactions are unimportant. From comparative rate experiments (with cyclohexene decomposition as standard) the rate expression for these reactions are These numbers are consistent with a «best» value for cyclohexene decomposition of      

Reinforcement Efficiency of Carbon Nanotubes – Myth and Reality

Different micromechanical models for the prediction of mechanical properties of CNT/polymer composites, taking into consideration filler percolation throughout the matrix, are considered. It is demonstrated that the critical filler volume fraction, where a percolating network of CNTs is forming, marks a “turning point” in the reinforcement efficiency. Expectations for the reinforcing effect of CNTs at concentrations above a percolating threshold with the current technology are in general unrealistic.

     

Preparation of Hybrid Microgels Functionalized by Silver Nanoparticles

Summary: Hybrid microgels functionalized with silver nanoparticles (AgNP) have been prepared and their physico‐chemical properties examined. Composite particles have been obtained by formation of AgNP in presence of poly[vinylcaprolactam‐co‐(acetoacetoxyethyl methacrylate)] (VCL/AAEM) microgel particles. It has been demonstrated that hybrid particles with different AgNP amounts can be prepared. Hybrid particles are sensitive to temperature and swelling, and collapse processes are reversible. Incorporation of AgNP leads to shrinkage of microgel template due to the partial immobilization of polymer chains on the microgel surface. As a consequence, gradual loss of temperature sensitivity is observed. Hybrid microgels form highly transparent well‐organized films on solid substrates, providing homogeneous distribution of AgNP in bulk material. Presence of AgNP increases considerably the thermal stability of composite films.

Schematic representation (left) and TEM image (right) of hybrid microgels containing silver nanoparticles (AgNP).     

Absorption spectra of thin film of polyaniline

The absorption spectra of thin film of polyaniline (PANI) on slide glass coated by a spin coater were measured as a function of the protonation state of PANI, the concentration of solution of PANI in NMP, drying temperature, and atmosphere. The absorbance value of the 950 nm peak and the ratio of the absorbance value at 950 nm to that of the 630 nm peak increases with increasing the protonation state of PANI. This is consistent with the observation of varying the conductivity with the protonation state. A modified molecular structure of PANI is proposed: where y and x are defined as the oxidation and the protonation states of PANI, respectively.     

Recent Development of Durable and Self‐Healing Surfaces with Special Wettability

Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.