以球面波为参考光的体全息图衍射特性研究

研究以球面波为参考光时体全息图的相对衍射效率问题，从理论计算中发现，当以球面波为参考光时，体全息图的串扰（ｃｒｏｓｓ－ｔａｌｋ）性能比用平面波时要略好一些，文章对此进行了分析解释并给出了实验验证。根据分析及实际读出的存储图像，发现球面参考光相对于平面参考光也不引起像质退化。这些特性表明了体全息存储器对于参考光平行度调节的要求并不十分严格。此外，文章还给出了以球面波为参考光时体全息图相对衍射效率的近似解析计算公式。     

Shift multiplexing by planar waveguide referencing

We present a new method with which to implement shift multiplexing by planar waveguide referencing. In this method, a planar waveguide is used to steer the reference beam, and we implement shift multiplexing by shifting the recording medium. A spatial selectivity as high as 1.1 microm is obtained. By using waveguide referencing we can make a compact and simple holographic system.     

Multilayer volume holographic optical memory

We demonstrate a scheme for volume holographic storage based on the features of shift selectivity of a speckle reference-wave hologram. The proposed recording method permits more-efficient use of the recording medium and yields greater storage density than spherical or plane-wave reference beams. Experimental results of multiple hologram storage and replay in a photorefractive crystal of iron-doped lithium niobate are presented. The mechanisms of lateral and longitudinal shift selectivity are described theoretically and shown to agree with experimental measurements.     

A simple statistical modeling of random phase reference in holographic memory

We present a simple modeling of random phase reference in holographic memory. The proposed model is analyzed by a statistical approach. Improvement on selectivity using random phase reference is shown in comparison with uniform phase plane wave reference and Gaussian beam reference. This simple and efficient model provides a physical insight and is verified by some experiments.     

低噪音光折变体全息存储

光折变全息存储中,透过晶体的散射光会影响再现象的信噪比,本文基于两波耦合理论,对光折变存储中的散射噪音随光斑尺寸的变化作了简化计算和分析,结果表明减小辐照在晶体上的光斑尺寸能降低散射噪音,提高衍射效率和信噪比,采用球面参考波小光斑尺寸入射,在KNSBN光折变晶体中存储了傅里叶全息图,并得到了低噪音的再现象.     

Enhanced angular selectivity in volume holograms with speckle reference waves

A speckle-multiplexing scheme with enhanced angular selectivity for holographic storage is proposed. Angular selectivity in the proposed holographic storage system is theoretically and experimentally investigated. We find the effect of speckle reference wave on angular selectivity strongly depends on the techniques to perform multiplexing for holographic storage. Angular selectivity of a holographic storage system can be effectively enhanced as long as angular deviation of reading wave induces a lateral displacement of the speckle pattern on the hologram plane. When angular deviation of reading wave only induces a speckle wavefront tilt on the hologram plane, the speckle wave is not helpful to enhance the angular selectivity and the angular selectivity becomes to depend on material thickness (Bragg condition) only.     

衍射光学器件光线追迹公式的实验验证

本文介绍了一种衍射光学器件光线追迹的方法，并给出了计算公式。作为验证，在实验室里制作了具有连续相位的体全息器件，将其实际再现光斑与计算点列图进行比较。构造透射体全息片的物光为离轴的球面波，始于轴外点Ａ（０，１３２ｓｉｎ８°，－１３２ｃｏｓ８°），参考光为平面光束，其与Ｚ轴夹角为１７°。激光器采用氩离子激光器（Ｓｐｅｃｔｒａ－ｐｈｙｓｉｃｓＭｏｄｅｌ２０２０），波长４８８ｎｍ；干板感光胶为重铬酸明胶（ＤＣＧ），胶层厚为１５μｍ；通光口径３０ｎｍ。测试时把全息片放在干板的位置。挡住物光，让再现光以和参考光路相同的路径平行入射到全息片上，在全息片后垂直光轴放置毛玻璃片，平行光轴移动毛玻璃片，可观察到－１级衍射光的变化。在距离原点的距离分别为（ａ）４０ｍｍ，（ｂ）７０ｍｍ，（ｃ）８７ｍｍ，（ｄ）９５ｍｍ的地方用ＣＣＤ拍摄了衍射光的形状，与程序计算的点列图在形状和大小上都吻合     

Shift multiplexing with a two-dimensional lens array

We propose a new shift multiplexing method to reduce the cross-talk noise and increase the holographic storage density. We use spherical waves emerging from a two-dimensional lens array as reference beams to multiple holograms. The theoretical results indicate that the sidelobes of the diffraction intensity can sharply be reduced to near-zero and the spatial separation of adjacent holograms can also be reduced, resulting in higher holographic storage density than conventional shift multiplexing methods.     

Generation of optical vortex light beams by volume holograms with embedded phase singularity

Special features of the optical-vortex (OV) beams generated by thick holographic elements (HE) with embedded phase singularity are considered theoretically. The volume HE structure is based on the 3D pattern of interference between an OV beam and a standard reference wave with regular wavefront. The incident beam diffraction is described within the framework of a linear single-scattering model in which the volume HE is represented by a set of parallel thin layers with the “fork” holographic structure. An explicit integral expression is derived for the complex amplitude distribution of the diffracted paraxial beam with OV. The numerical analysis demonstrates that the HE thickness may essentially influence not only selectivity and efficiency of the OV beam generation but also the amplitude and phase profile of the diffracted beam as well as regularities of its propagation. We have studied the generated OV morphology and laws of its evolution; in particular, the possibility of obtaining a circularly symmetric OV beam regardless of the diffraction angle is revealed.     

体全息成像系统中非周期体光栅的深度选择性研究

由一束球面波和一束平面波或者两束球面波干涉所形成的体全息光栅,由于其光栅矢量在全息图体积内是随位置的变化而变化的,所以被称为非周期型的体光栅。主要研究了用于体全息三维成像系统的非周期体光栅的深度选择特性。根据叠加的原理,将非周期体光栅看作多个固定周期的基元体光栅的叠加,结合耦合波理论分析非周期体光栅的衍射特性。采用这一方法,利用Matlab软件模拟,研究了两束记录光夹角对所记录的非周期体光栅深度选择性的影响和在两束记录光夹角相同时,球面参考光体全息成像系统及平面参考光体全息成像系统深度选择性的差别,最后在光折变晶体材料中进行非周期型和周期型体光栅的记录和再现,对模拟结果进行了实验验证。     

Design of the spatial filter window for digital holographic convolution reconstruction of object beam field

In the convolution reconstruction process of digital holographic object beam field, the object beam fields with different magnifications can be obtained when the reconstructing beams are spherical waves with different wave curvature radii. This paper presents a theoretical and experimental discussion on the useful spatial frequency spectrum of the hologram numerically illuminated by the spherical wave. The result shows that there would be an image in the spatial frequency spectrum of digital hologram, which is completely the same as the object, if the wave surface radius of the spherical wave is equal to the distance from the object to the CCD sensor. Taking this image as a reference and designing a filter, the position of the reconstructed images with different magnifications can be predicted correctly in the reconstructed plane. Additionally, since the spectrum distribution of zero-order diffraction can be forecasted accurately in theory, its contribution can be effectively eliminated through changing the spatial filter shape; then a reconstructed object field containing more high-frequency information can be obtained.     

全息光学元件递推制作的数学模型

用递推制作方法可制作出像质优良的全息光学元件。首先用球面光路系统产生球面参考波,制作一块中间全息元件,然后用这块中间全息元件产生非球面参考波,制作出最终全息元件。本文阐述全息光学元件递推制作的数学摸型。     

Holography with local reference beam obtained by spatial frequency separation

The holographic method disclosed in this paper allows holographic recording with a very high reference-to-object wave energy ratio without attenuating the rays diffracted by the object. In those holographic methods permitting local generation of the reference beam, which have been proposed so far, the reference beams are obtained by either wavefront or amplitude division of the wave of coherent radiation impinging onto the optical apparatus. It is readily seen that most of the incident energy is used to process the reference beam reducing drastically the energy of the object bearing wave. In the novel method proposed here the reference wave is obtained by separation of the low spatial frequency components from the high-order spatial frequency components which bear the object information. As a result of the removal of the low frequency components, a dark-field image is recorded and later reconstructed by the holographic plate. Even though the configuration is of the off-axis type, proper design may reduce the coherence requirements of the source of radiation to those for in-line holography. The paper discusses the basic properties of the method and experimental results are presented. This work forms part of a dissertation to be submitted by M. L. A. Gassend in partial fulfillment of the requirements for the Ph.D. degree. It has been supported by the National Research Council of Canada under Grants Nos. A 7240 and T 0409, and by the Department of External Affairs (Award No. 759193 administered by the Canada Council).     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

参考光波面质量对全息存储质量影响的数值模拟研究

采用数值模拟方法研究了不同种类参考光波面质量对再现图像质量的影响.针对全息实验实际情况,对二值图像建立了傅里叶变换全息图记录和读出的物理模型,分别考察采用一般平面波参考光、高斯光束球面波参考光和散斑参考光时的读出图像质量,并以信噪比损失作为衡量图像质量的定量工具.模拟结果表明,在理想平面波参考光和球面波参考光的情形,全息读出图像质量非常好,与输入图像相比信噪比损失在0.6dB以下.但是对于散斑参考光,尽管其极优的位移选择性提供了高密度存储的可能性,但再现图像质量明显变差,信噪比损失在5dB以上,实现有效的数据存储位密度将是十分困难的.为了兼顾存储密度和再现质量,应该考虑优化参考光的途径.     

物光参考光同光轴的体全息存储光学系统设计

将两块漫射板分别置于输入面的两侧,使物光和参考光同光轴,可以使体全息存储傅里叶变换光学系统更为紧凑。然而,在这种全息存储光学系统中,物光和参考光的总数值孔径较物光数值孔径大很多。分析这种体全息存储光学系统物光和参考光光路的设计要求和光学参量的确定;采用多重结构方法对物光正向光路、逆向光路和参考光光路同时优化设计,实现对物光光路二对物像共扼位置控制像差,并满足参考光光路的要求;给出前后组焦距分别为33 mm和30 mm的物光和参考光同光轴,前工作距为30 mm,物光和参考光总数值孔径为0.53的全息存储光学系统的设计结果。系统的波像差小于0.071λ,达到衍射极限。     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

Orthogonal-reference-pattern-modulated shift multiplexing for collinear holographic data storage

A novel hybrid shift multiplexing method for collinear holographic data storage (CHDS) by using orthogonal reference patterns (RPs) is proposed, analyzed, and demonstrated. For this method, holograms are multiplexed by not only shifting the media but also using different RPs. Compared with the traditional method, the shift pitch for the hybrid method is substantially reduced because of the selectivity introduced by different RPs. The interpage cross talk due to Bragg mismatch and degeneracy for multiplexing holograms in the same volume by using orthogonal RPs is also attenuated by utilizing the shift selectivity of the hologram. A 1.5 μm shift pitch is experimentally achieved by using three amplitude RPs in a system that would be 4.5 μm with only one RP. This new method offers an alternative to significantly increase the data density and transfer rate of the CHDS system given that the media has ideal properties.     

一种单色全息平板波导显示系统的研究

设计了一种由耦出线性全息光栅和耦入体全息光栅组成的单色全息平板波导显示系统。该系统的工作原理是微型显示器发出的单色图像光波信息经过准直透镜后,通过耦入体全息光栅和耦出线性光栅把图像光波信息从平板玻璃的一端耦入,另外一端耦出,最终在出瞳位置进入人眼。介绍了全息光栅的特点,利用耦合波理论与K矢量闭合法理论推导全息光栅的视场角,同时介绍了全息光栅的设计方法,该方法是通过分束镜将激光分为物光波和参考光波,且按照一定的入射角度在全息干板上发生干涉来实现。模拟仿真结果表明:该系统显示视场角为18°×14°,出瞳距离为30 mm,传递函数MTF在30 lp/mm时均在0.3以上,满足目视系统的使用要求,可以应用于新一代头盔显示系统中。     

On the holographic simulation of non-circular zone plates

New methods involving the manipulation of fundamental wavefronts (e.g., plane and spherical) with simple optical components such as pinholes and spherical lenses have been developed for the fabrication of elliptic, hyperbolic and conical holographic zone plates. Also parabolic zone plates by holographic techniques have been obtained for the first time. The performance behaviour of these zone plates has been studied. Further a phenomenological explanation is offered for the observed improved fringe contrast obtained with a spherical reference wave. An erratum to this article is available at .