Selective formation of trans and cis(CH3CN) isomers of [Ru(bpy)(CO)2(CH3CN)2] (bpy=2,2-bipyridine) from [Ru(CO)2(CH3CN)3]2(PF6)2 using an electrochemical oxidation step

The selective in situ synthesis of trans and cis(CH₃CN)-[Ru(bpy)(CO)₂ (CH₃CN)₂]²⁺ isomers from the same [Ru(CO)₂ (CH₃CN)₃]₂²⁺ dimer precursor but using either an electrochemical-chemical or chemical-electrochemical process is described.     

Synthesis and crystal structure of Ru-supported tungstoantimonate [Sb2W20Ru2(H2O)2(dmso)6O68]

The first Ru^III-supported tungstoantimonate [Ru^II(bpy)₃]₂[Sb₂W₂₀Ru^III₂(H₂O)₂(dmso)₆O₆₈]·3dmso (bpy=bi-pyridine) (1a) has been successfully isolated as [Ru(bpy)₃]²⁺ (Rubpy) salt by routine synthetic reaction in mixed solutions with dmso and water. Single-crystal X-ray analysis was carried out on 1a, which crystallizes in the triclinic system space group P-1 with a=16.804 (6), b=16.988 (6), c=17.666 (6) Å, α=107.397 (13)°, β=106.883 (13)°, γ=103.616 (12)°. V=4309 (3) Å³, Z=1 with R1=0.0773. The compound 1a reveals the following features: (1) Rubpy is firstly used as an alternative ruthenium-source for the synthesis of Ru-substituted heteropolytungstate; (2) the structure of 1a consists of four Ru^III-O-S(CH₃)₂ and two W-O-S(CH₃)₂ bonds resulting in an assembly with C₂ symmetry; (3) the Ru^III ions are linked to two dmso groups via two Ru^III-O-S(CH₃)₂ bonds, which represents the other dmso-coordination mode to Ru^III in POM chemistry. The cyclic voltammetry studies of 1a in dmso/H₂SO₄ (3/1 v/v) at pH 2.5 medium using the glassy carbon electrode as a working electrode show the respective electrochemical behaviors of the W-centers and the Ru-centers within 1a, which could be separated clearly. In addition, the compound 1a exhibits photoluminescence arising from π*−t_2g ligand-to-metal transition of Rubpy.     

The reaction of manganese carbonyl with tert-butylisocyanide: Synthesis and characterization of cis- and trans-[Mn(BuNC)4(CN)(CO)]

The reaction of Mn₂(CO)₁₀ with tert-butyl isocyanide in the presence of 10 bar of carbon monoxide leads to the formation of cis- and trans-[Mn(^tBuNC)₄(CN)(CO)], 1a and 1b, in good yields together with [Mn(^tBuNC)₆]CN (2), as a minor product. Nevertheless, the reaction pathway highly depends on the reaction conditions. An interesting side-product is obtained, if chloroform is used during the workup procedure. Compound 3 is composed of cationic [Mn(^tBuNC)₅(CO)] units as well as dinuclear anionic [Mn(^tBuNC)₄(CO)(μ-CN)MnCl₃] moieties. If no additional CO pressure is applied to the system, the organic product N,N′-di-tert-butyl-3,5-bis-tert-butylimino-4-phenyl-cyclopent-1-ene-1,2-diamine (4), is formed in considerable amount. Compound 4 most probably is produced via a double benzylic C-H activation of the solvent toluene and the oligomerization of four isocyanide moieties. The reaction of 1b with Co(NO₃)₂ leads to the isolation of the trinuclear cyanide bridged coordination compound {[Mn(^tBuNC)₄) (CO) (μ-CN)]₂Co(NO₃)₂}, 5, in which the cobalt atoms are tetrahedrally surrounded by the two cyanide ligands and the η¹-coordinated nitro groups. In contrast to the reaction of 1b, treatment of the dicyano complexes cis- or trans-[Ru(^tBuNC)₄(CN)₂] with Co(NO₃)₂ results in the formation of the coordination polymers {[Ru(^tBuNC)₄(CN)₂]Co(NO₃)₂}_n, 7 (trans) and 9 (cis). All new compounds are characterized by X-ray diffraction experiments.     

Synthesis,characterization, DNA-binding and DNA-photocleavage studies of [Ru(bpy)2(BPIP)] and [Ru(phen)2(BPIP)] (BPIP = 2-(4′-biphenyl)imidazo[4,5-f][1,10]phenanthroline)

New ligand 2-(4′-biphenyl)imidazo[4,5-f][1,10]phenanthroline (BPIP) and its complexes [Ru(bpy)₂(BPIP)]²⁺ (1) (bpy = 2,2′-bipyridine) and [Ru(phen)₂(BPIP)]²⁺ (2) (phen = 1,10-phenanthroline) have been synthesized and characterized by mass spectroscopy, ¹H NMR and cyclic voltammetry. The interaction of two Ru(II) complexes with calf thymus DNA (CT-DNA) was investigated by spectroscopic and viscosity measurements. Results indicate that both complexes bind to DNA via an intercalative mode and the DNA-binding affinity of complex 2 is much greater than that of complex 1. Furthermore, when irradiated at 365 nm, both complexes have also been found to promote the photocleavage of plasmid pBR 322 DNA.     

Polymorphism in [Co(SCN)4(ppz-H)2] (ppz,piperazine)

A one-pot reaction of [Co(NO₃)₂ · 6H₂O and piperazine] with NH₄SCN/NaSCN in water–methanol (1:1) solvent leads to two polymorphs of [Co(SCN)₄(ppz-H)₂] (ppz, piperazine) (I and II). X-ray crystal structure reveals both have same space group but the differences in the alignment of pendant SCN⁻ leads to two polymorphs. In I, trifurcated N–H?S hydrogen bonding plays a prominent role in crystal packing leading to S?S interactions between SCN fragments but in II, no such trifurcation arises and thereby the crystal packing occurs through hydrogen bonding interactions only leading to a distinctly different network topology. TG/DSC and FT-IR study reveal they are enantiotropically related.     

Electrochemical behaviour of [Ru(L)(CO)2Cl2] [Ru(L)(CO)Cl3][Me4N] and [Ru(L)(CO)2(CH3CN)2][CF3SO3]2 complexes (L = 2,2′- bipyridine or 4,4′-isopropoxycarbonyl-2,2′-bipyridine)

The clectrochemical behaviour of the complexes [Ru^II(L)(CO)₂Cl₂], [Ru^II(L)(CO)Cl₃][Me₄N] and [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ (L = 2,2′-bipyridine or 4,4′-isopropoxycarbonyl-2,2′-bipyridine) has been investigated in CH₃CN. The oxidation of [Ru(L)(CO)₂Cl₂] produces new complexes [Ru^III(L)(CO)(CH₃CN)₂Cl]²⁺ as a consequence of the instability of the electrogenerated transient Ru^III species [Ru^III(L)(CO)₂Cl₂]⁺. In contrast, the oxidation of [Ru^II(L)(CO)Cl₃][Me₄N] produces the stable [Ru^III(L)(CO)Cl₃] complex. In contrast [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ is not oxidized in the range up to the most positive potentials achievable. The reduction of [Ru^II(L)(CO)₂Cl₂] and [Ru^II(L)(CO)₂(CH₃CN)₂][CF₃SO₃]₂ results in the formation of identical dark blue strongly adherent electroactive films. These films exhibit the characteristics of a metal-metal bond dimer structure. No films are obtained on reduction of [Ru^II(L)(CO)Cl₃][Me₄N]. The effect of the substitution of the bipyridine ligand by electron-withdrawing carboxy ester groups on the electrochemical behaviour of all these complexes has also been investigated.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

An easy electrochemical procedure for tailoring thin films containing the [Fe(bpy)2(CH3CN)2] and/or [Fe(bpy)3]-like cores (bpy=2,2-bipyridine). Application to the design of a modified electrode with a supramolecular structure

A simple electrochemical procedure to tailor thin polymeric films containing the [Fe^II(bpy)₂(CH₃CN)₂]²⁺ and/or [Fe^II(bpy)₃]²⁺-like cores have been described (bpy=2,2^′-bipyridine). The procedure is based on the electroreductive precipitation of soluble polymers prepared in situ in CH₃CN by mixing Fe³⁺ ions and a bis bipyridyl ligand, (chiragen: chir). In the resulting [Fe^II(chir)(CH₃CN)₂]_n²⁺ films, the two labile S ligands can be easily replaced by a bidentate ligand. This method has been applied with success to design a modified electrode with a supramolecular structure.     

Crystal structure and magnetic property of spin crossover complex Fe(3-phenylpyridine)2[Au(CN)2]2

A novel two-dimensional network bimetallic Fe Au spin crossover coordination polymer based on 3-phenylpyridine-coordinated iron centers and linear gold cyanide bridges {Fe(3-phenylpyridine)₂[Au(CN)₂]₂}_n (1), has been synthesized. The compound is characterized by elemental analysis, IR, single-crystal X-ray analysis at 300 and 90 K and magnetic measurements. The Fe^II ions in 1 have octahedral Fe^IIN₆ coordination geometries, which are linked by [Au(CN)₂]⁻ units at the equatorial plane to form a polymeric 2D sheet architecture. The two pyridine rings coordinate in axial position. Variable-temperature (2-300 K) magnetic susceptibility measurements of 1 were performed to determine the spin transition behavior. SQUID data show that high and low spin states exist in a 1:1 ratio at 90 K. However, only one kind of Fe^II atom is apparent crystallographically at 90 K, indicating that the high and low spin sites are disordered in the polymeric 2D framework.     

Synthesis,characterization, DNA-binding and DNA-photocleavage studies of [Ru(bpy)2(pmip)] and [Ru(phen)2(pmip)] (pmip = 2-(2′-pyrimidyl)imidazo[4,5-f][1,10]phenanthroline

Two new Ru(II) complexes, [Ru(bpy)₂(pmip)]²⁺ (1) and [Ru(phen)₂(pmip)]²⁺ (2), have been synthesized and characterized by elemental analysis, ESI-MS and ¹H NMR spectra. Their DNA-binding properties were studied by means of UV–VIS, emission and CD spectra, thermal denaturation and viscosity measurements as well as their DNA-photocleavage properties. The experimental results show that both 1 and 2 can bind to DNA in an intercalative mode; the DNA-binding affinity of 2 is greater than that of 1, which suggests that the ancillary ligands have a significant effect on the spectroscopic properties and DNA-binding behavior of the Ru(II) complexes. Under irradiation with UV light, the Ru(II) complexes show excellent efficiency of cleaving DNA. This research may provide valuable insight into the interactions of metal complexes with DNA, knowledge that is an excellent backdrop for the rational design of promising drugs.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

New bipyridyl/phenanthroline ruthenium(II) and ruthenium(III) complexes possessing acetate appended thioether. Evidence for oxidative linkage isomerization

The acetate bearing dithioether, sodium di(2-carboxymethylsufanyl)maleonitrile, L¹ upon reaction with [Ru^II(bpy)₂Cl₂]·2H₂O, [Ru^II(phen)₂Cl₂]·2H₂O, [Ru^III(bpy)₂Cl₂]⁺ or [Ru^III(phen)₂Cl₂]⁺ in methanol formed complexes of the type [(bpy)₂Ru{S₂(CH₂COO)₂C₂(CN)₂}], (1), [(phen)₂Ru{S₂(CH₂COO)₂C₂(CN)₂}], (2), [(bpy)₂Ru{(OOCCH₂)₂S₂C₂(CN)₂}]⁺, (5) and [(phen)₂Ru{(OOCCH₂)₂S₂C₂(CN)₂}]⁺, (6) respectively. Four other Ru(III) complexes with di(benzylsulfanyl)maleonitrile, L², [(bpy)₂Ru{S₂(PhCH₂)C₂(CN)₂}]³⁺, (7) and [(phen)₂Ru{S₂(PhCH₂)₂C₂(CN)₂}]³⁺, (8), and with acetate, [(bpy)₂Ru(OOCCH₃)₂]⁺, (9) and [(phen)₂Ru(OOCCH₃)₂]⁺, (10) were also synthesized. In the cyclic voltammetry, complexes (1) and (2) exhibited quasireversible oxidation waves at 1.01 and 1.02 V vs. Ag/AgCl over GC electrode in DMF, while the corresponding Ru(III) L¹ complexes (5) and (6) exhibit reversible oxidation at E_1/2 0.59 and 0.58 V, respectively, under identical conditions. This is unlike the voltammetric behavior of the Ru(II) and Ru(III) L² complexes, wherein the complex pairs (3), (7) and (4), (8) exhibited identical voltammograms with single reversible one electron waves at E_1/2 0.98 and 0.92 V, respectively under identical conditions. The voltammograms of Ru(II)-L² complexes (3) and (4) also became irreversible in presence of nearly four molar equivalent of sodium acetate. Hence, the irreversible redox behavior of complexes (1) and (2) has been interpreted in terms of rapid linkage isomerization, i.e. shift in κ²-S,S′ to κ²-O,O′ coordination, following the Ru(II)/Ru(III) electrode process. The electronic spectra of Ru(III)-L¹ complexes (5) and (6) resemble closely with that of (9) and (10) instead of Ru(III)-L² complexes (7) and (8), further supports proposed linkage isomerization. The cationic complexes were obtained as [PF₆]⁻ salts and all compounds were characterized using analytical and spectral (IR, ¹H NMR, UV-vis and mass) data.     

Controlling the electronic density of the [Ru2(DPhF)3(O2CR)] core to obtain one-dimensional compounds

The substitution of the acetate ligand in [Ru₂Cl(DPhF)₃(O₂CMe)] (DPhF⁻ = N,N′-diphenylformamidinate) by the pentafluorobenzoate group gives the complex [Ru₂Cl(DPhF)₃(O₂CC₆F₅)(OH₂)] (1), and the reaction of 1 with AgSO₃CF₃ leads to the compound [Ru₂(DPhF)₃(O₂CC₆F₅)(OH₂)₂]SO₃CF₃ (2). The low donor character of the pentafluorobenzoate ligand compared to the acetate group decreases the electron density of the Ru₂⁵⁺ unit which permits ligands to bond at both axial positions of the diruthenium moiety. The use of the [Au(CN)₂]⁻ group yields the new complex {[Ru₂(DPhF)₃(O₂CC₆F₅)][Au(CN)₂]} (3). Complexes 1–3 are characterized by elemental analysis, ¹⁹F{¹H} NMR, IR and electronic spectroscopy, mass spectrometry and variable-temperature magnetic measurements. The crystal structure of 2·H₂O is also reported. The magnetic properties of complex 1 is in accordance with the ground-state configuration σ²π⁴δ²(π*δ*)³. In contrast, the slope of representation of the magnetic moment towards temperature in complex 2 indicates a gradual transition from essentially high spin (S = 3/2) to low spin (S = 1/2) configuration.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Chemistry of Ruthenium Polypyridine Complexes: IX. Nitro-Nitrosyl Equilibrium in cis-[Ru(2,2'-bpy)2(L)NO2]+ Complexes

Ruthenium(II) bisbipyridyl complexes cis-[Ru(bpy)₂(L)NO₂](BF₄) (bpy is 2,2'-bipyridyl) with 4-substituted pyridine ligands L = 4-(Y)py (Y = NH₂, Me, Ph, and CN) were obtained. The equilibrium constants of the reversible nitro-nitrosyl transition [Ru(bpy)₂(L)NO₂]⁺ + 2H⁺ [Ru(bpy)₂(L)NO]^{3 +} + H₂O were measured in solutions with pH 1.5-8.5 (ionic strength 0.4). The constants correlate with the protonation constants of free ligands 4-(Y)py.     

Structural characterization of [Fe(NO)(mnt)2] salts

The iron dithiolene compounds [Fe₂(mnt)₄]²⁻ [1]²⁻ and [Fe(NO)(mnt)₂]ⁿ (n = 1−, [2]¹⁻; n = 2−, [2]²⁻) ([mnt]²⁻ = maleonitriledithiolate = [(NC)₂C₂S₂]²⁻) have been characterized structurally by X-ray diffraction as their [Et₄N]⁺ salts at 100 K. Dianion [2]²⁻ is prepared from [2]¹⁻ by reduction with Na[Et₃BH] and is observed to have a bent Fe-NO angle at 149.9(5)° in contrast to the linear configuration of Fe-NO in [2]¹⁻ (180.0°). The change from linear to bent binding mode for NO, an increase of more than 0.1 Å in the Fe-N bond length, and the relative invariance of the Fe-S distances for [2]²⁻ versus [2]¹⁻ indicate that the NO ligand is the site of reduction. The [Et₃NH]⁺ complex of [2]¹⁻ was also identified by crystallography and found to have hydrogen bonding contacts between [Et₃NH]⁺ and the cyano nitrogen atom of an [mnt]²⁻ ligand. Furthermore, relatively close S?S contacts (3.602-3.615 Å) occur between [2]¹⁻ anions, which pack together in an offset, head-to-head fashion. These S?S contacts are absent in the structure of [Et₄N][2]. Infrared spectra show an energy decrease for, and a significant broadening of, the NO bond stretching absorption peak in [2]²⁻, which is consistent with a bent NO ligand sampling a range of conformations both by facile pivoting about the Fe-N axis and by a breathing of the Fe-NO angle.     

Hydrolytic cleavage of Schiff bases by [RuCl2(DMSO)4]

New hexa-coordinated Ru(II) complexes of the type [RuCl₂(DMSO)₂(diamine)] (diamine = o-phenylenediamine and ethylenediamine) have been prepared by reacting cis-[RuCl₂(DMSO)₄] with Schiff bases (H₂sal-en, 1; H₂nap-en, 2; H₂sal-o-pdn, 3; H₂nap-o-pdn, 4) in a 1:1 ratio. The ligands, which were expected to act as tetradentate (N₂O₂) chelates under the normal reaction conditions, were found to undergo hydrolytic cleavage to form the diamine and the corresponding aldehyde. All the complexes have been characterized by analytical and spectroscopic (IR, electronic and¹H NMR) data. Single-crystal X-ray analysis of the complex [RuCl₂(DMSO)₂(o-pndn)] revealed that the coordination environment around the ruthenium metal consists of a N₂S₂Cl₂ octahedron.     

X-ray crystal structures and solution dynamics of sodium organofluorotitanates [Na{Ti2(C5Me5)2F7}] and [NaTi6(C5Me5)5F20(H2O)]·(THF)

[Na{Ti₂(C₅Me₅)₂F₇}] (1) was prepared from sodium fluoride and [{Ti(C₅Me₅)F₃}₂] [H.W. Roesky, et al., Angew. Chem. Int. Ed. Engl. 31 (1992) 864-866]. The solid-state 1 consists of a polymeric chain of two rows of dititanate anions [Ti₂(C₅Me₅)₂F₇]⁻ connected by sodium ions in the middle of the chain. Each sodium ion is coordinated by five fluorine atoms from three [Ti₂(C₅Me₅)₂F₇]⁻ anions. The variable-temperature ¹⁹F NMR of CD₃CN solution of 1 revealed interconversions of monomeric species [Na(CD₃CN)_n{Ti₂(C₅Me₅)₂F₇}] (1solv) with different number of CD₃CN ligands on the sodium ion. The addition of HMPA to the CD₃CN solution of 1 allows ¹⁹F NMR observation of 1·HMPA (1a) and 1·HMPA·CD₃CN (1b) in the slow exchange. The solid-state structure of [NaTi₆(C₅Me₅)₅F₂₀(H₂O)]·(THF) (2·THF) reveals the sodium ion coordinated by four fluorine atoms from the anion [Ti₂(C₅Me₅)₂F₇]⁻ and by three fluorine atoms from the cluster [Ti₄(C₅Me₅)₃F₁₃(H₂O)].     

Ligand assisted homolytic cleavage of the Ru-Ru single bond in [Ru2(CO)4] core and the chemical consequence

The Ru-Ru single bond in [Ru₂(CO)₄(MeCN)₆][BF₄]₂ remains intact in the reaction with 2-i-propyl-1,8-naphthyridine (ⁱPrNP) and the isolated product is the cis-[Ru₂(ⁱPrNP)₂(CO)₄(OTf)₂] (1) obtained via crystallization in the presence of [n-Bu₄N][OTf]. The 2-t-butyl-1,8-naphthyridine (^tBuNP), on the contrary, leads to the oxidative cleavage of the Ru-Ru single bond resulting in the trans-[Ru(^tBuNP)₂(MeCN)₂][BF₄]₂[NC(Me)C(Me)N] (2). The anti-[NC(Me)C(Me)N]²⁻ is the product of the two-electron reductive coupling of two acetonitrile molecules. The phenoxo appendage in 2-(2-hydroxyphenyl)-1,8-naphthyridine (hpNP) brings the identical effect of the scission of the Ru-Ru bond but the process is non-oxidative and the product obtained is the cis-[Ru(hpNP)₂(CO)₂][BF₄] (3). The bis-(diphenylphosphino)methane (dppm) in dichloromethane oxidatively cleave the Ru-Ru bond leading to chloro bridged [Ru(μ-Cl)(dppm)(CO)(MeCN)]₂[BF₄]₂ (4). All the complexes have been characterized by the spectroscopic and electrochemical measurements and their structures have been established by X-ray diffraction study.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.