PREPARATION AND CHARACTERIZATION OF SCHIFF BASE POLYMERS DERIVED FROM 4,4′-METHYLENEBIS(CINNAMALDEHYDE)

New Schiff base polymers poly[4,4＇-methylenebis（cinnamaldehyde）ethylenediimine] （PMBCen）, poly[4,4＇- methylenebis（cinnamaldehyde）1,2-propylenediimine] （PMBCPn）, poly[4,4＇-methylenebis（cinnamaldehyde）1,3-propylenediimine] （PMBCPR）, poly[4,4＇-methylenebis（cinnamaldehyde） 1,2-phenylenediimine] （PMBCPh）, poly[4,4＇-methylenebis（cinnamaldehyde）meso-stilbenediimine] （PMBCS）, poly[4,4＇-methylenebis（cinnamaldehyde）urea] （PMBCUR）, poly[4,4＇- methylenebis（cinnamaldehyde）semicarbazone] （PMBCSc）, poly[4,4＇-methylenebis（cinnamaldehyde）thiosemicarbazone] （PMBCTSc） and poly[4,4＇-methylenebis（cinnamaldehyde）hydrazone] （PMBCH） were formed by polycondensation of 4,4＇- methylenebis（cinnamaldehyde） with ethylenediamine, 1,2-propylenediamine, 1,3-propylenediamine, 1,2-phenylenediamine, meso-stilbenediamine, urea, semicarbazide, thiosemicarbazide and hydrazine, respectively. The dialdehyde and polymers have been characterized through elemental micro-analysis, IR, UV-Vis and ^1H-NMR spectroscopic techniques. Thermoanalytical studies and viscous flow of dilute solutions of dialdehyde and its polymers have been examined and compared.     

Synthesis of monomeric and oligomeric 1,1′-methylenebis-(1H-pyrazoles) contaning ethynyl fragments

1,1′-Methylenebis(1H-pyrazole) and 1,1′-methylenebis(3,5-dimethyl-1H-pyrazole) reacted with iodine in the presence of iodic acid to give the corresponding 4,4′-diiodo derivatives. Polycondensation of the latter with p-diethynylbenzene led to the formation of oligomeric compounds. 1,1′-Methylenebis(4-iodo-1H-pyrazoles) were converted into 4,4′-diethynyl derivatives by the Sonogashira and reverse Favorskii reactions, and their oxidative polycondensation in the presence of copper(I) chloride in pyridine also gave oligomeric products with a molecular weight exceeding 9000.     

Unsymmetrical N and/or O-bridged calixarene derivatives: synthesis,structure and encapsulation of solvent molecules in the solid state

Eight unsymmetrical N and/or O-bridged calixarene derivatives were obtained by 1 (naphthalene-2,7-diol), 2 (bis(4-hydroxyphenyl)methanone), 3 (4,4′-methylenedianiline), 4 (3,3′-methylenedianiline), 5 (4,4′-oxydianiline) and 6 (4,4′-(perfluoropropane-2,2-diyl)dianiline) reacting with fragment a (4,4′-bis(dichloro-s-triazinyloxy)propane-2,2-diyldibenzene) and b (N,N′-bis(dichloro-s-triazinyl)-4,4′-methylenedianiline) under very mild reaction conditions via efficient fragment coupling strategy. We also obtained the crystal structure of 1a (tetraoxocalix[2](propane-2,2-diyldibenzene,naphthalene)[2]triazine) which can form a molecular capsule by two dimers with C–H?N and C–H?O quadruple hydrogen bonds, and it has the encapsulation ability toward solvent molecules.     

New organosoluble polyimides with low dielectric constants derived from bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl] diphenylmethylene

A new kink diamine with trifluoromethyl group on either side, bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl]diphenylmethane (BTFAPDM) , was reacted with various aromatic dianhydrides to prepare polyimides via poly (amic acid) precursors followed by thermal or chemical imidization. Polyimides were prepared using 3,3′, 4,4′-biphenyltetracarboxylic dianhydride(1), 4,4′-oxydiphthalic anhydride(2), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (3), 4,4′-sulfonyldiphthalic anhydride(4), and 4,4′-hexafluoroisopropylidene-diphathalic anhydride(5). The fluoro-polyimides exhibited low dielectric constants between 2.46 and 2.98, light color, and excellent high solubility. They exhibited glass transition temperatures between 227 and 253°C, and possessed a coefficient of thermal expansion (CTE) of 60-88 ppm/°C. Polymers PI-2, PI-3, PI-4, PI-5 showed excellent solubility in the organic solvents: N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridkie and tetrahydrofuran (THF). Inherent viscosity of the polyimides were found to range between 0.58 and 0.72 dLg-1. Thermogravimetric analysis of the polyimides revealed a high thermal stability decomposition temperature in excess of 500°C in nitrogen. Temperature at 10 % weight loss was found to be in the range 506-563°C and 498-557°C in nitrogen and air, respectively. The polyimide films had a tensile strength in the range 75-87 MPa; tensile modulus, 1.5-2.2 GPa; and elongation at break, 6-7%.     

Synthesis of new charge-compensated cobalt bis(1,2-dicarbollide) derivatives

New hetero-substituted charge-compensated cobalt bis(1,2-dicarbollide) derivatives were synthesized by the reaction of 8,8′-μ-iodo-3-commo-3-cobalta-bis(1,2-dicarba-closo-dodecaborane) [8,8′-μ-I-3,3′-Co(1,2-C₂B₉H₁₀)₂] with 1,4-thioxane, pyridine N-oxide, and tetrahydropyran. X-ray diffraction studies showed that the 8′-iodo-8-(pyridiniumoxy)eucosahydro-1,1′,2,2′-tetracarba-3-commo-cobalta-closo-tricosaborate molecule has the gauche-conformation (the substituents are turned with respect to each other by 69.2°). The positive charge is predominantly localized on the N(Py) atom.     

Synthesis,structure, and complexing ability of fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-dicarbonyl) compounds

New fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-diketones) and 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(3-oxopropionates) were synthesized by azo coupling of the corresponding 1,3-dicarbonyl compounds with biphenyl-4,4′-bis(diazonium) dichloride. Complexing ability of the obtained bis-hydrazones was studied, and new coordination compounds of the general formula M₂L₂ [where M = Ni(II), Cu(II); L = fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-diketone)] were obtained.     

Coordination Adducts of Niobium(V) and Tantalum(V) Azide M(N3)5 (M=Nb,Ta) with Nitrogen Donor Ligands and their Self‐Ionization

Several new donor–acceptor adducts of niobium and tantalum pentaazide with N‐donor ligands have been prepared from the pentafluorides by fluoride–azide exchange with Me₃SiN₃ in the presence of the corresponding donor ligand. With 2,2′‐bipyridine and 1,10‐phenanthroline, the self‐ionization products [MF₄(2,2′‐bipy)₂]⁺[M(N₃)₆]⁻, [M(N₃)₄(2,2′‐bipy)₂]⁺[M(N₃)₆]⁻ and [M(N₃)₄(1,10‐phen)₂]⁺[M(N₃)₆]⁻ were obtained. With the donor ligands 3,3′‐bipyridine and 4,4′‐bipyridine the neutral pentaazide adducts (M(N₃)₅)₂⋅L (M=Nb, Ta; L=3,3′‐bipy, 4,4′‐bipy) were formed.     

Synthesis of Schiff bases by aromatic amine condensation with 3,3′-bithiophenes-2,2′ and 4,4′-dicarbaldehydes

Reactions of aromatic amines with 3,3′-bithiophene-2,2′-dicarbaldehyde 1 and 3,3′-bithiophene-4,4′-dicarbaldehyde 2 gave the 2,2′-(N-(aryl)diimino)-3,3′-bithiophene 3 and 4,4′-(N-(aryl)diimino)-3,3′-bithiophene 4 in good yields. Orthophenylenediamine reacted with 1 and 2 to give dithieno[3,4-c;4′,3′-e]azepino[1,2-a]benzimidazole 5 and dithieno[2,3-c;3′,2′-e]azepino[1,2-a]benzimidazole 6. All these original products have been characterized by spectroscopic techniques and elemental analysis.     

Coordination Adducts of Niobium(V) and Tantalum(V) Azide M(N3)5 (M=Nb,Ta) with Nitrogen Donor Ligands and their Self‐Ionization

Several new donor–acceptor adducts of niobium and tantalum pentaazide with N‐donor ligands have been prepared from the pentafluorides by fluoride–azide exchange with Me₃SiN₃ in the presence of the corresponding donor ligand. With 2,2′‐bipyridine and 1,10‐phenanthroline, the self‐ionization products [MF₄(2,2′‐bipy)₂]⁺[M(N₃)₆]^?, [M(N₃)₄(2,2′‐bipy)₂]⁺[M(N₃)₆]^? and [M(N₃)₄(1,10‐phen)₂]⁺[M(N₃)₆]^? were obtained. With the donor ligands 3,3′‐bipyridine and 4,4′‐bipyridine the neutral pentaazide adducts (M(N₃)₅)₂?L (M=Nb, Ta; L=3,3′‐bipy, 4,4′‐bipy) were formed.     

Synthesis of endo,exo-7,8,9,10-tetrachlorobicyclo[4.4.0]deca-7,9-diene-3,4-dicarboxylic acid N,N′-bisimides

A one-stage synthesis was developed of N,N′-(3,3′-dimethoxy-4,4′-diphenylmethane)- and N,N′-(1,2-ethane)-endo,exo-7,8,9,10-tetrachlorobicyclo[4.4.0]deca-7,9-diene-3,4-dicarboxylic acids bisimides by reaction of a bisadduct of 1,8,9,10,11,11-hexachlorotricyclo[6.2.1.0^5,10]-undec-9-ene-4,5-dicarboxylic acid N,N′-R-bisimide with pyridine in DMF. The spatial structure of compounds obtained was established.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Ein neuer borheterocyclus mit transannularer bor-stickstoff-koordination

Reactions of phenylboronic acid with N-alkylhydroxylamines and formaldehyde give bis-phenylboronates of N,N′-methylenebis(N-alkylhydroxylamines). The pyroboronate function is incorporated in a bicyclo [3.3.0]octane ring system, the structure of which results from transannular N-B coordination and is spectroscopically determined.     

The reaction of bis(phenyldimethylphosphine)bis(diphenylsilyl)platinum(II) with acetylenes

The synthesis and the reactions of cationic complexes of rhodium(I) and iridium(I) of the type [M(NN′)(COD)]⁺ and [M(NN′)(CO)₂]⁺ (NN′  Schiff bases of pyridine-2-aldehyde; COD  cis,cis-1,5-cyclooctadiene) are reported.     

Di­aqua­bis(4,4′-bi­pyridine-N)­bis­(di­hydrogenphosphato-O)copper(II): blocking of extended metal–ligand coordination by hydrogen bonding

The title compound, [Cu(H₂PO₄)₂(C₁₀H₈N₂)₂(H₂O)₂], is a mononuclear complex in which the Cu atom is square-planar coordinated by two di­hydrogenphosphate anions and two monodentate 4,4′-bi­pyridine (4,4′-bipy) groups, and by two more distant aqua ligands to complete a distorted octahedral coordination. Metal–metal bridging by 4,4′-bipy is blocked by inter­molecular hydrogen bonding from the di­hydrogen­phosphate to the second N atom of 4,4′-bipy. The crystal packing is controlled both by additional hydrogen bonding between the aqua and phosphate ligands and by π-stacking. These hydrogen-bonding interactions create two-dimensional networks which are connected by the bi­pyridine ligands.     

Reactions of 2′-oxo-1′,2′-dihydrospiro[cyclopropane-1,3′-indole]-2,2,3,3-tetracarbonitriles with nucleophiles

2′-Oxo-1′,2′-dihydrospiro[cyclopropane-1,3′-indole]-2,2,3,3-tetracarbonitriles reacted with oxygencentered nucleophiles to form addition products at the cyano groups with conservation of the three-membered ring. Reactions of the title compounds with alcohols required the presence of base catalyst, and the products, 2-amino-4,4-dialkoxy-2′-oxo-1′,2′-dihydrospiro[3-azabicyclo[3.1.0]hex-2-ene-6,3′-indole]-1,5-dicarbonitriles, were converted into the corresponding 2-imino-2′,4-dioxospiro[3-azabicyclo[3.1.0]hexane-6,3′-indole]-1,5-dicarbonitriles and 2,2′,4-trioxospiro[3-azabicyclo[3.1.0]hexane-6,3′-indole]-1,5-dicarbonitriles by the action of acetic and sulfuric acids, respectively. The reactions with ketone oximes occurred in the absence of a catalyst, yielding 2-amino-4,4-bis(alkylideneaminooxy)-2′-oxo-1′,2′-dihydrospiro[3-azabicyclo[3.1.0]hex-2-ene-6,3′-indole]-1,5-dicarbonitriles. The reactions with thiols, aliphatic amines, and anilines were accompanied by opening of the three-membered ring. In the reactions with triphenylphosphine and thiols 2-(2-oxo-2,3-dihydro-1H-indol-3-ylidene)malononitrile was obtained, while morpholine and N,N-dimethylaniline gave rise, respectively, to 3,3-diaryl-and 3,3-dimorpholino-1H-indol-2(3H)-ones and tri- and dicyanoethylene derivatives.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

Alkylation of aniline with methanol in the presence of FeCl3 · 6H2O in carbon tetrachloride

The reaction of aniline with methanol in the presence of FeCl₃ · 6 H₂O in carbon tetrachloride leads to the formation of N-methyl- and N,N-dimethylanilines and 4,4′-methylenebis(N,N-dimethylaniline).     

Mononuclear tungsten(VI) complexes with bis(phenolato) ligands: syntheses,characterisations and activity in ROMP reaction

The reaction of bulky ligand precursor 2,2′-methylenebis(4-methyl-6-tert-butylphenol) (H₂mbp) or 2,2′-ethylidenebis(4,6-di-tert-butylphenol) (H₂ebp) with trisdiolatotungsten(VI) complex [W(eg)₃] 1 (eg=ethanediolate dianion) provides heteroleptic complexes [W(mbp)(eg)₂] 2 or [W(ebp)(eg)₂] 3, respectively. Sterically less hindered 2,2′-dihydroxy-1,1′-dinaphtylmethane (H₂dinap) forms heteroleptic disubstituted complex [W(dinap)₂(eg)] 4. The X-ray crystal structure determinations confirmed that the isolated compounds are made of monomeric tris(diolato)tungsten(VI) molecules in which the central tungsten atom is bonded to six oxygen atoms forming a distorted octahedral coordination sphere around the metal ion. Complexes 2 and 3 catalyse the ring opening metathesis reaction of norbornene when activated by Et₂AlCl.     

Hydrazine‐based polyimides from isomeric bis(chlorophthalimide)s

3,3′‐Dichloro‐N,N′‐biphthalimide (3,3′‐DCBPI), 3,4′‐dichloro‐N,N′‐biphthalimide (3,4′‐DCBPI), and 4,4′‐dichloro‐N,N′‐biphthalimide (4,4′‐DCBPI) were synthesized from 3‐ or 4‐chlorophthalic anhydrides and hydrazine in glacial acetic acid. The yield of 3,3′‐DCBPI (90%) was much higher than that of 4,4′‐DCBPI (33%) because of the better stability of the intermediate, 3‐chloro‐N‐aminophthalimide, and 3,3′‐DCBPI. A series of hydrazine‐based polyimides were prepared from isomeric DCBPIs and 4,4′‐thiobisbenzenethiol (TBBT) in N,N‐dimethylacetamide in the presence of tributylamine. Inherent viscosity of these polymers was in the range of 0.51–0.69 dL/g in 1‐methyl‐2‐pyrrolidinone (NMP) at 30 °C. These polyimides were soluble in 1,1,2,2‐terachloroethane, NMP, and phenols. The 5% weight‐loss temperatures (T_5%s) of the polymers were near 450 °C in N₂. Their glass‐transition temperatures (T_gs) determined by dynamic mechanical thermal analysis and differential scanning calorimetry increased according to the order of polyimides based on 4,4′‐DCBPI, 3,4′‐DCBPI, and 3,3′‐DCBPI. The hydrolytic stability of these polymers was measured under acid, basic, and neutral conditions and the results indicated that the order was 3,3′‐DCBPI/TBBT > 3,4′‐DCBPI/TBBT > 4,4′‐DCBPI/TBBT. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4933–4940, 2007     

Formation and Crystal Structure of 4,4'-Oxybis(2,6-bis(dimethylamino)-4H-1,3,5,4-thiadiazaphosphinine 4-Oxide)

Abstract

The reaction of P₄S₁₀ with dimethyl cyanamide as solvent yields a complex mixture of products, from which the new compound 4,4′-oxybis(2,6-bis(dimethylamino)-4H-1,3,5,4-thiadiazaphosphinine 4-oxide) (1) was isolated. In this pyrophosphate derivative, the phosphorus atoms are part of the, otherwise rarely encountered, 1,3,5,4-thiadiaza-phosphinine ring. The molecular structure of the new compound was elucidated by single-crystal X-ray diffraction, showing an almost planar thiadiazaphosphinine ring and a cis-like arrangement of the heterocycles at the two phosphorus atoms.