Maxwell–Wagner relaxation and magnetodielectric properties of Bi<Subscript>0.5</Subscript>La<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> ceramics

The complex permittivity ε = ε′–iε″ of manganite bismuth–lanthanum Bi_0.5La_0.5MnO₃ ceramics has been measured at temperature T = 78 K in the frequency range f = 200–10⁵ Hz and in the magnetic induction range B = 0–5 T. Dielectric relaxation and the pronounced magnetodielectric effect have been detected. The explanation based on the superposition of Maxwell–Wagner relaxation and the magnetoresistance effect has been proposed.     

Electrical switching in the MoO<Subscript>3</Subscript>–WO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> and MoO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

High field electrical switching on blown films of MoO₃(60%)–P₂O₅(40%), MoO₃(50%)–WO₃(10%)–P₂O₅(40%), and MoO₃(45%)–WO₃(15%)–P₂O₅(40%) having different thicknesses was studied and compared. Switching was observed using two terminal samples. S-type current–voltage characteristic (current-controlled negative resistance—CCNR) with memory was observed in molybdenum–phosphate glasses, but N-type characteristic (voltage-controlled negative resistance—VCNR) with threshold in tungsten–molybdenum–phosphate glasses was observed. The important observation was that with the addition of WO₃ to binary MoO₃–P₂O5 led to a change of I–V characteristic from CCNR with memory to VCNR with threshold. The measurements of density and molar volume showed linear relation between MoO₃ content and density which decreased with the increase of MoO₃ content. The samples’ thickness had no significant effect on threshold voltage. The attained results also indicated that the electrode material had no effect on switching property of devices. The switching behavior of the devices did not show any dependence on the polarity of the applied voltage. In terms of the effect of heat on the switching behavior of molybdenum–phosphate glasses, it was found that threshold voltage decreases with increasing of temperature. Finally, the switching phenomenon was explained by thermal (formation of crystalline filaments) and electronic models.     

Successive structural phase transitions in Pr<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>CoO<Subscript>3</Subscript> in the range 10–1120 K

The crystal and magnetic structures of the Pr_0.5Sr_0.5CoO₃ metallic ferromagnet have been studied using neutron diffraction and synchrotron radiation. Successive structural transitions with the reduction of the crystal symmetry from cubic (space group Pm3m) to rhombohedral (\(R\bar 3c\), ～800 K), orthorhombic (Imma, ～300 K) and, then, to triclinic at ～120 K are detected during cooling from 1120 K. The transition from the orthorhombic system to a phase with a lower symmetry is characterized by a sharp change in the anisotropy of the unit cell, which indicates the partial ordering of the e _g orbitals of cobalt. The accompanying change in the interatomic distances and valence angles give rise to an anomaly in the temperature dependence of the magnetic susceptibility at T ≈ 120 K. The ordered magnetic moment μ_Co ≈ 2μ_B corresponds to the assumption of the intermediate spin state of Co³⁺ ions and the mixture of low- and intermediate-spin states of Co⁴⁺ ions.     

Phase formation in the BaCO<Subscript>3</Subscript>–PbO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Features of the formation of lead-ferroniobate compounds in the xBaCO₃–(1 – x)PbO–Fe₂O₃–Nb₂O₅ system by solid-phase synthesis are investigated. For perovskite-type lead-ferroniobate solid solution, a single-phase concentration region is revealed at 1233 K. The crystalline structures of the synthesized compounds are refined using Rietveld analysis and the Pm3?m and R3m space groups. Ceramic samples of lead ferroniobate are studied by scanning electron microscopy.     

Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

The low-temperature macroscopic phase separation in La<Subscript>0.5</Subscript>Ba<Subscript>0.5</Subscript>CoO<Subscript>3 − δ</Subscript> cobaltite

La_0.5Ba_0.5CoO_2.87 has been characterized with neutron and synchrotron powder diffraction and magnetization measurements. This compound was shown to have a cubic crystal structure at temperatures above 200 K whereas slightly above the Curie point T _c ∼ 170 K the structural separation into two different pseudocubic phases gradually develops upon cooling. The structural transformation is reversible. At 2 K the sample consists of G-type antiferromagnetic oxygen-poor and ferromagnetic oxygen-rich phases (approximately 33 and 66%, respectively).     

Microwave characterization of Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>O<Subscript>3</Subscript> multiferroics at X-band

The microwave characteristics of Pb_1?x Ca _x Fe_0.5Nb_0.5O₃ multiferroics (x = 0.0, 0.4, 0.45, 0.5, 0.55, 0.6), have been investigated as a function of frequency and substitution. The results depict ?13.99 dB reflection loss at 11.65 GHz in composition x = 0.6. Microwave absorption is enhanced with substitution of Ca²⁺ ions and undoped composition 0.0 behaves as electromagnetic shield. The model governing microwave absorption is discussed and different compositions for electromagnetic applications have been suggested.     

Elastic properties of TeO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Ag<Subscript>2</Subscript>O glasses

A series of glasses [(TeO₂) _x (B₂O₃)_1−x ]_1−y [Ag₂O] _y with x = 70 and y = 10, 15, 20, 25 and 30 mol% were synthesised by rapid quenching. Longitudinal and shear ultrasonic velocity were measured at room temperature and at 5 MHz frequency. Elastic properties, Poisson's ratio, microhardness, softening temperature and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses and the role of the Ag₂O inside the glass network is discussed. Estimated parameters based on Makishima–Mackenzie theory and bond compression model were calculated in order to analyse the experimental elastic moduli. Comparison between the experimental elastic moduli data obtained in the study and the calculated theoretically by the mentioned above models has been discussed.     

Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Orientation dependence of electrical properties of 0.96Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-0.04BaTiO<Subscript>3</Subscript> lead-free piezoelectric single crystal

In this paper, a single crystal of 0.96Na_0.5Bi_0.5TiO₃-0.04BaTiO₃ with dimensions of Φ 30×10 mm was grown by the top-seeded-solution growth method. X-ray powder diffraction results show that the as-grown crystal possesses the rhombohedral perovskite-type structure. The dielectric, piezoelectric and electrical conductivity properties were systematically investigated with 〈001〉, 〈110〉 and 〈111〉 oriented crystal samples. The room-temperature dielectric constants for the 〈001〉, 〈110〉 and 〈111〉 oriented crystal samples are found to be 650, 740 and 400 at 1 kHz. The (T _m, ε _m) values of the dielectric temperature spectra are almost independent of the crystal orientations; they are (306°C, 3718), (305°C, 3613) and (307°C, 3600) at 1 kHz for the 〈001〉, 〈110〉 and 〈111〉 oriented crystal. The optimum poling conditions were obtained by investigating the piezoelectric constants d ₃₃ as a function of poling temperature and poling electric field. For the 〈001〉 and 〈110〉 crystal samples, the maximum d ₃₃ values of 146 and 117 pC/N are obtained when a poling electric field of 3.5 kV/mm and a poling temperature of 80°C were applied during the poling process. The as-grown 0.96Na_0.5Bi_0.5TiO₃-0.04BaTiO₃ crystal possesses a relatively large dc electrical conductivity, especially at higher temperature, having a value of 1.98×10⁻¹¹ Ω⁻¹⋅m⁻¹ and 3.95×10⁻⁹ Ω⁻¹⋅m⁻¹ at 25°C and 150°C for the 〈001〉 oriented crystal sample.     

Sol–gel synthesis and characterization of Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite solid electrolytes

Composite solid electrolytes in the system (1???x)Li₂CO₃–xAl₂O₃, with x?=?0.0–0.5 (mole), were synthesized by a sol–gel method. The synthesis carried out at low temperature resulted in voluminous and fluffy products. The obtained materials were characterized by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy/energy-dispersive X-ray, Fourier transform infrared spectroscopy and AC impedance spectroscopy. Structural analysis of the samples showed an amorphous feature of Li₂CO₃ and traces of α-LiAlO₂, γ-LiAlO₂ and LiAl₅O₈. The prepared composite samples possess high ionic conductivities at 130–180 °C on account of the presence of lithium aluminates as well as the formation of a high concentration of an amorphous phase of Li₂CO₃ via this sol–gel preparative technique.     

Photoinduced phenomena in amorphous As<Subscript>4</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript>–Sn films

We investigate the kinetics of photodarkening and recording of holographic diffraction gratings in amorphous As₄S₃Se₃ thin-film structures doped with tin (Sn) in concentrations of 0–10 at %. It is established that an increase in the Sn concentration leads to a decrease in the photodarkening rate and degree. The photodarkening kinetics is approximated by a stretched exponential function. It is found that an increase in the Sn concentration leads to a decrease in the transmission (photodarkening) variation in the investigated As₄S₃Se₃–Sn films. It is determined that, in the recording of holographic diffraction gratings at a Sn concentration of 3–8 at %, the As₄S₃Se₃–Sn films exhibit the maximum sensitivity and diffraction efficiency of the recorded gratings. It is shown that the dependence of diffraction efficiency on the As₄S₃Se₃ film thickness has the maximum at a film thickness of 4 µm.     

Dielectric response of SrTiO<Subscript>3</Subscript>–SrMg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>O<Subscript>3</Subscript> solid solutions in the terahertz–infrared range

The reflection and transmission spectra of ceramic samples of SrTiO₃–SrMg_1/3Nb_2/3O₃ solid solutions have been measured in the frequency range of 5–5000 cm^–1 and in the temperature range of 5–370 K. Based on these spectra, the spectra of the real ε'(ν) and imaginary ε''(ν) parts of the complex permittivity ε*(ν) have been simulated by the method of dispersion analysis. It has been found that the temperature evolution of the dielectric constant is entirely determined by the behavior of the soft mode.     

High resolution diffraction and small angle scattering neutron investigations of LaCo<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>O<Subscript>3+</Subscript><Subscript>δ</Subscript>: effect of oxygen content

We have investigated LaCo_0.5Mn_0.5O_{3+ δ} compounds with different oxygen content by means of magnetization, high resolution and small-angle neutron diffraction measurements. Oxygen content decrease down to stoichiometric composition leads to an essential increase of T_C and magnetic moment while Co/Mn ionic ordering degree is kept almost constant. It is assumed that upon oxygen reduction Co³⁺ ions change their valence state down to 2+ one that leads to dominating of Co²⁺-Mn⁴⁺ ferromagnetic interactions as well as T_C increase. Magnetic properties can be explained in terms of coexistence of long-range ferromagnetic order and short-range clusters with antiferromagnetic interactions prevailing. Size distribution of the mentioned short-range magnetic inhomogeneities is rather mild within the samples but it is strongly temperature dependent.     

Internal friction and magnetoelectric response in two-layer composites Tb<Subscript>0.12</Subscript>Dy<Subscript>0.2</Subscript>Fe<Subscript>0.68</Subscript>–PbZr<Subscript>0.53</Subscript>Ti<Subscript>0.47</Subscript>O<Subscript>3</Subscript>

The inverse magnetoelectric effect and internal friction in two-layer composites based on ferromagnetic Tb_0.12Dy_0.2Fe_0.68 and piezoelectric PbZr_0.53Ti_0.47O₃ are studied in an ac electrical field in the frequency range of 52–213 kHz at temperatures of 293 to 400 K. A correlation is found between the internal friction and the efficiency of the inverse magnetoelectric transformation at resonant frequencies.     

Specifics of the Electrical Properties of Composite Solid Oxide Membranes Based on SrTi<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3–δ</Subscript>

The electrical properties of dual-phase fluorite-pervoskite oxide systems based on strontium titanate- ferrite (SrTi_0.5Fe_0.5O_3–δ) are studied. We find that the oxygen ionic and ambipolar conductivities of strontium titanate-ferrite can be considerably improved by introducing the fluorite phase Ce_0.8(Sm_0.8Sr_0.2)_0.2O_2–δ. This is advantageous considering the prospects of applying these types of composite materials in different electrochemical devices, e.g., as membrane materials in electrochemical converters for the production of hydrogen and syngas and anode materials in solid oxide fuel cells.     

Gd-doped SrTi<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3–δ</Subscript> mixed ionic-electronic conductors: structural,thermal, and electrical properties

The effect of Sr by Gd substitution on the structural, thermomechanical, electrical, and electrochemical properties of SrTi_0.5Fe_0.5O_3–δ was investigated in the present work. The powders were synthesized by a solid-state reaction method at 1150 °C with following sintering of the ceramic samples at 1350 °C. The unit cell parameters of the sintered Sr_1–x Gd _x Ti_0.5Fe_0.5O_3–δ (x = 0–0.4) ceramics were found to decrease with a gradual increase in Gd content, and a change in the crystal symmetry from cubic to tetragonal at x ≥ 0.1 was observed. It was found that the Gd doping enhanced the stability of the ceramic samples in a reducing atmosphere and reduced the thermal expansion coefficient value. Gd doping in the amount of 5 mol% can be used for long-term stabilization of the SrTi_0.5Fe_0.5O_3–δ material’s conductivity in reducing atmospheres with no significant alteration to the transport properties and oxygen permeability.     

An ab initio study of PuO<Subscript>2±0.25</Subscript>, UO<Subscript>2±0.25</Subscript>, and U<Subscript>0.5</Subscript>Pu<Subscript>0.5</Subscript>O<Subscript>2±0.25</Subscript>

Hybrid density functional theory has been used to systematically study the electronic, geometric, and magnetic properties of strongly correlated materials PuO_2±x , UO_2±x , and U_0.5Pu_0.5O_2±x with x = 0.25. The calculations have been performed using the all-electron full- potential linearized augmented plane wave plus local orbitals basis (FP-L/APW+lo) method. Each compound has been studied at the ferromagnetic (FM) and anti-ferromagnetic (AFM) configurations with and without spin-orbit coupling (SOC) and full geometry optimizations. The optimized lattice constants, bulk moduli, and band gaps are reported. Total energy calculations indicate that the ground states are AFM for all compounds studied here and the band gaps are typically higher than 1.0 eV, characteristic of semiconductors. The total energy is lowered significantly and the band gaps increase with the inclusion of SOC. The chemical bonds between the actinide metals and oxygen atoms are primarily ionic in character.     

Cluster spin glass and superparamagnetism in RuSr<Subscript>2</Subscript>Eu<Subscript>1.5</Subscript>Ce<Subscript>0.5</Subscript>Cu<Subscript>2</Subscript>O<Subscript>10-</Subscript><Subscript>δ</Subscript>

We investigate in detail the dc magnetization and nonlinear ac susceptibility behavior of the superconducting ferromagnet RuSr₂Eu_1.5Ce_0.5Cu₂O_{10- δ} (Ru1222) to develop a comprehensive understanding of the spin glass and superparamagnetism in this material. The structural properties of the system result in the formation of magnetic (ferromagnetic) clusters of different sizes, shapes and properties. The magnetic clustering of the system leads to observation of various features in dc magnetization and ac susceptibility consistent with superparamagnetism and cluster spin glass states, which can coexist or stand alone, depending on the temperature range considered. Experimental results of magnetic measurements in combination with their analysis have enabled us to explain and distinguish these phenomena, as well as to propose a temperature dependent scenario of the system behavior.