Development of a highly precise ID-ICP-SFMS method for analysis of low concentrations of lead in rice flour reference materials

Microwave digestion and isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-SFMS) has been applied to the determination of Pb in rice flour. In order to achieve highly precise determination of low concentrations of Pb, the digestion blank for Pb was reduced to 0.21 ng g⁻¹ after optimization of the digestion conditions, in which 20 mL analysis solution was obtained after digestion of 0.5 g rice flour. The observed value of Pb in a non-fat milk powder certified reference material (CRM), NIST SRM 1549, was 16.8 ± 0.8 ng g⁻¹ (mean ± expanded uncertainty, k = 2; n = 5), which agreed with the certified value of 19 ± 3 ng g⁻¹ and indicated the effectiveness of the method. Analytical results for Pb in three brown rice flour CRMs, NIST SRM 1568a, NIES CRM 10-a, and NIES CRM 10-b, were 7.32 ± 0.24 ng g⁻¹ (n = 5), 1010 ± 10 ng g⁻¹ (n = 5), and 1250 ± 20 ng g⁻¹ (n = 5), respectively. The concentration of Pb in a candidate white rice flour reference material (RM) sample prepared by the National Metrology Institute of Japan (NMIJ) was observed to be 4.36 ± 0.28 ng g⁻¹ (n = 10 bottles). Figure Digestion blank of Pb was carefully reduced to approximately 0.2 ng g^-1 which permitted the highly precise determination of Pb at low ng g^-1 level in foodstuff samples by ID-SFMS     

LC–MS–MS determination of ibuprofen, 2-hydroxyibuprofen enantiomers,and carboxyibuprofen stereoisomers for application in biotransformation studies employing endophytic fungi

The purpose of this study was the development and validation of an LC–MS–MS method for simultaneous analysis of ibuprofen (IBP), 2-hydroxyibuprofen (2-OH-IBP) enantiomers, and carboxyibuprofen (COOH-IBP) stereoisomers in fungi culture medium, to investigate the ability of some endophytic fungi to biotransform the chiral drug IBP into its metabolites. Resolution of IBP and the stereoisomers of its main metabolites was achieved by use of a Chiralpak AS-H column (150 × 4.6 mm, 5 μm particle size), column temperature 8 °C, and the mobile phase hexane–isopropanol–trifluoroacetic acid (95: 5: 0.1, v/v) at a flow rate of 1.2 mL min⁻¹. Post-column infusion with 10 mmol L⁻¹ ammonium acetate in methanol at a flow rate of 0.3 mL min⁻¹ was performed to enhance MS detection (positive electrospray ionization). Liquid–liquid extraction was used for sample preparation with hexane–ethyl acetate (1:1, v/v) as extraction solvent. Linearity was obtained in the range 0.1–20 μg mL⁻¹ for IBP, 0.05–7.5 μg mL⁻¹ for each 2-OH-IBP enantiomer, and 0.025–5.0 μg mL⁻¹ for each COOH-IBP stereoisomer (r ≥ 0.99). The coefficients of variation and relative errors obtained in precision and accuracy studies (within-day and between-day) were below 15%. The stability studies showed that the samples were stable (p > 0.05) during freeze and thaw cycles, short-term exposure to room temperature, storage at −20 °C, and biotransformation conditions. Among the six fungi studied, only the strains Nigrospora sphaerica (SS67) and Chaetomium globosum (VR10) biotransformed IBP enantioselectively, with greater formation of the metabolite (+)-(S)-2-OH-IBP. Formation of the COOH-IBP stereoisomers, which involves hydroxylation at C3 and further oxidation to form the carboxyl group, was not observed.     

Ethanol Production from Cashew Apple Bagasse: Improvement of Enzymatic Hydrolysis by Microwave-Assisted Alkali Pretreatment

In this work, the potential of microwave-assisted alkali pretreatment in order to improve the rupture of the recalcitrant structures of the cashew able bagasse (CAB), lignocellulosic by-product in Brazil with no commercial value, is obtained from cashew apple process to juice production, was studied. First, biomass composition of CAB was determined, and the percentage of glucan and lignin was 20.54 ± 0.70% and 33.80 ± 1.30%, respectively. CAB content in terms of cellulose, hemicelluloses, and lignin, 19.21 ± 0.35%, 12.05 ± 0.37%, and 38.11 ± 0.08%, respectively, was also determined. Results showed that, after enzymatic hydrolysis, alkali concentration exerted influence on glucose formation, after pretreatment with 0.2 and 1.0 mo L⁻¹ of NaOH (372 ± 12 and 355 ± 37 mg g_glucan⁻¹) when 2% (w/v) of cashew apple bagasse pretreated by microwave-assisted alkali pretreatment (CAB-M) was used. On the other hand, pretreatment time (15–30 min) and microwave power (600–900 W) exerted no significant effect on hydrolysis. On enzymatic hydrolysis step, improvement on solid percentage (16% w/v) and enzyme load (30 FPU g_CAB-M⁻¹) increased glucose concentration to 15 g L⁻¹. The fermentation of the hydrolyzate by Saccharomyces cerevesiae resulted in ethanol concentration and productivity of 5.6 g L⁻¹ and 1.41 g L⁻¹ h⁻¹, respectively.     

Fluorescence polarization immunoassay for rapid screening of ochratoxin A in red wine

A fluorescence polarization (FP) immunoassay, based on a monoclonal antibody and an ochratoxin A (OTA)-fluorescein tracer, has been developed for rapid screening of OTA in red wine. Wine samples were diluted with methanol and passed through aminopropyl solid-phase extraction columns prior to the FP assay. Average recoveries from samples spiked with OTA at levels of 2.0 and 5.0 ng/mL were 79% with RDS of 11% (n = 6). The limit of detection of the FP immunoassay was 0.7 ng/mL OTA, and the whole analysis was performed in less than 10 min. The assay was tested on 154 red wine samples (naturally contaminated or spiked at level ranging from 0.1 to 5.0 ng/mL) and compared with an high-performance liquid chromatography/immunoaffinity column clean-up method, showing a good correlation (r = 0.9222). Their compliance with the European regulation (2.0 ng/mL OTA maximum permitted level) was correctly assessed for 70% of the analyzed samples of red wine, whereas confirmatory analyses were required for the remaining ones with OTA levels close to the regulatory limit. No false-negative or positive results were observed using the FP immunoassay. The proposed FP assay is a useful screening method for OTA in red wines, when high throughput is required, that could also be used for white and rosé wines, which are known to contain less interfering compounds such as polyphenols.     

Study of Nd2–x Ce x CuO4?±?δ (x?=?0.1–0.25) as cathode material for intermediate-temperature solid oxide fuel cells

The solid solubility limit of Ce in Nd_2–x Ce _x CuO_4 ± δ , prepared by sol–gel process, is established up to x = 0.2. The transition from negative temperature coefficient to positive temperature coefficient, within the solid solubility region, is observed at 620 °C. The area-specific-resistance (ASR) is optimized for electrochemical cell sintered at 800 °C. ASR enhances with increase in sintering temperature of cell. ASR value of 0.93 ohm cm² at 700 °C, determined by electrochemical impedance spectroscopy is comparable against that by voltage versus current (V–I) characteristics at 0.98 ohm cm² at the same temperature. Electrochemical performance and ASR of Nd_1.8Ce_0.2CuO_4 ± δ is improved when prepared by sol–gel route over solid-state reaction, which is attributed to uniform size and shape of nanocrystalline grains.     

Monitoring of the non-steroid anti-inflammatory drug indomethacin: development of immunochemical methods for its purification and detection

The present research focused on the development of an immunoassay and an immunochemical sol–gel-based immunoaffinity purification (IAP) method for purification and detection of the non-steroid anti-inflammatory drug (NSAID) indomethacin (IMT). A polyclonal antibody (Ab) for IMT was generated, and two sensitive microplate assays for the detection of IMT were developed (termed OV and HRP formats), based on the enzyme-linked immunosorbent assay (ELISA) method. The limits of detection of the assays were 15 ± 1.25 ng mL⁻¹ (n = 50) and 12 ± 0.17 ng mL⁻¹ (n = 4) for the OVA and HRP formats, respectively. The Abs exhibited slight cross-reactivity with other NSAIDs. The Abs were also used to develop a sol–gel-based IAP method for clean-up and concentration of IMT. Several sol–gel formats with various amounts of antibodies were examined; the best and most reproducible format was at a TMOS:HCl molar ratio of 1:6 in which 120 μL of IMT Abs was entrapped. The binding capacity under these conditions was ca. 100 to 250 ng of IMT with very low non-specific binding (less than 5% of the applied amount). The sol–gel IAP method, combined with solid-phase extraction, successfully eliminated serum interference to a degree that enabled analysis of spiked serum samples by ELISA. The method was also found to be fully compatible with subsequent chemical analytical methods, such as liquid chromatography followed by mass spectrometry. The approaches developed in this study form a basis for analysis of IMT in biological samples in order to monitor their pharmacokinetic properties, and may be further used to study population exposure to IMT, and to monitor the occurrence of IMT contamination in water samples.     

Comparative study of screening methodologies for ochratoxin A detection in winery by-products

The worldwide contamination of winery by-products by mycotoxins may present a serious hazard to human and animal health. Mycotoxins are secondary metabolites of fungi with possible adverse effects on humans, animals, and crops that result in illnesses and economic losses. Mycotoxins are under continuous survey in Europe, but the regulatory aspects still need to be set up for winery by-products, which may be used in animal feed. The aim of this study was to implement a simple but reliable analytical methodology for ochratoxin A (OTA) quantification in grape pomaces in order to perform a survey of samples from the Douro Demarcated Region, Portugal. The method involved a unique preparation step, solvent extraction, followed by high-performance liquid chromatography (HPLC) with fluorescence (FL) detection. A comparative study was performed with two extraction solvents (ethyl acetate and methanol) as well as using extraction on an immunoaffinity column. The linearity range for OTA analysis was 0.05–23.5 μg L⁻¹ with a detection limit of 0.05 μg L⁻¹ and a precision (expressed by the coefficient of variation under repeatability conditions) of 0.4–14.7%. The percentage of recovery was on average 23.5 ± 3.6% (extraction with ethyl acetate) or 70.1 ± 2.5% (extraction with 70% methanol). Accounting for the recovery factor and the chromatographic detection limit, as well as the preconcentration factor, the limit of detection in grape pomaces is 0.04 μg kg⁻¹ (ethyl acetate extraction) and 0.33 μg kg⁻¹ (methanol extraction). Samples from 12 out of 13 sites in the Douro Demarcated Region showed OTA presence with concentrations not exceeding 0.4 μg kg⁻¹. Both developed methods for evaluation of OTA in grape pomace are simple but efficient. Figure Extraction of ochratoxin A (OTA) from grape pomaces allows simple but efficient quantification of OTA in winery by-products by HPLC-FL     

Electro-catalysis by immobilised human flavin-containing monooxygenase isoform 3 (hFMO3)

Human flavin-containing monooxygenases are the second most important class of drug-metabolizing enzymes after cytochromes P450. Here we report a simple but functional and stable enzyme-electrode system based on a glassy carbon (GC) electrode with human flavin-containing monooxygenase isoform 3 (hFMO3) entrapped in a gel cross-linked with bovine serum albumin (BSA) by glutaraldehyde. The enzymatic electrochemical responsiveness is characterised by using well-known substrates: trimethylamine (TMA), ammonia (NH₃), triethylamine (TEA), and benzydamine (BZD). The apparent Michaelis–Menten constant (K′_M) and apparent maximum current (I′_max) are calculated by fitting the current signal to the Michaelis–Menten equation for each substrate. The enzyme-electrode has good characteristics: the calculated sensitivity was 40.9 ± 0.5 mA mol⁻¹ L cm⁻² for TMA, 43.3 ± 0.1 mA mol⁻¹ L cm⁻² for NH₃, 45.2 ± 2.2 mA mol⁻¹ L cm⁻² for TEA, and 39.3 ± 0.6 mA mol⁻¹ L cm⁻² for BZD. The stability was constant for 3 days and the inter-electrode reproducibility was 12.5%. This is a novel electrochemical tool that can be used to investigate new potential drugs against the catalytic activity of hFMO3.     

Determination of cyanide in blood by electrospray ionization tandem mass spectrometry after direct injection of dicyanogold

An electrospray ionization tandem mass spectrometric (ESI-MS-MS) method has been developed for the determination of cyanide (CN^–) in blood. Five microliters of blood was hemolyzed with 50 μL of water, then 5 μL of 1 M tetramethylammonium hydroxide solution was added to raise the pH of the hemolysate and to liberate CN^– from methemoglobin. CN^– was then reacted with NaAuCl₄ to produce dicyanogold, Au(CN)₂^–, that was extracted with 75 μL of methyl isobutyl ketone. Ten microliters of the extract was injected directly into an ESI-MS-MS instrument and quantification of CN^– was performed by selected reaction monitoring of the product ion CN^– at m/z 26, derived from the precursor ion Au(CN)₂^– at m/z 249. CN^– could be measured in the quantification range of 2.60 to 260 μg/L with the limit of detection at 0.56 μg/L in blood. This method was applied to the analysis of clinical samples and the concentrations of CN^– in the blood were as follows: 7.13 ± 2.41 μg/L for six healthy non-smokers, 3.08 ± 1.12 μg/L for six CO gas victims, 730 ± 867 μg for 21 house fire victims, and 3,030 ± 97 μg/L for a victim who ingested NaCN. The increase of CN^– in the blood of a victim who ingested NaN₃ was confirmed using MS-MS for the first time, and the concentrations of CN^– in the blood, gastric content and urine were 78.5 ± 5.5, 11.8 ± 0.5, and 11.4 ± 0.8 μg/L, respectively.     

Determination of enzyme activity inhibition by FTIR spectroscopy on the example of fructose bisphosphatase

A mid-infrared enzymatic assay for label-free monitoring of the enzymatic reaction of fructose-1,6-bisphosphatase with fructose 1,6-bisphosphate has been proposed. The whole procedure was done in an automated way operating in the stopped flow mode by incorporating a temperature-controlled flow cell in a sequential injection manifold. Fourier transform infrared difference spectra were evaluated for kinetic parameters, like the Michaelis–Menten constant (K _M) of the enzyme and V _max of the reaction. The obtained K _M of the reaction was 14 ± 3 g L⁻¹ (41 μM). Furthermore, inhibition by adenosine 5′-monophosphate (AMP) was evaluated, and the K _M^App value was determined to be 12 ± 2 g L⁻¹ (35 μM) for 7.5 and 15 μM AMP, respectively, with V _max decreasing from 0.1 ± 0.03 to 0.05 ± 0.01 g L⁻¹ min⁻¹. Therefore, AMP exerted a non-competitive inhibition.     

Optimization on fabrication and performance of A-site-deficient La0.58Sr0.4Co0.2Fe0.8O3-δ cathode for SOFC

A-site-deficient perovskite cathode material La_0.58Sr_0.4Co_0.2Fe_0.8O_3 − δ (L58SCF) is coated on the yttria-stabilized zirconia electrolyte by screen-printing technique. Several key fabrication parameters including selection of additives (binder and pore former), effect of coating thickness, sintering temperature and time on the microstructure, and electrochemical performance of cathode are investigated by scanning electron microscopy and electrochemical impedance spectroscopy. We study the microstructure and the electrochemical property of the cathode with different kinds of additives. Results show that the cathode possesses fine microstructure, enough porosity, and ideal electrochemical property when polyvinyl butyral serves as both binder and pore former in the cathode. The cathode with three screen-printing coats (thickness 28 ± 7 μm, weight 6.07 ± 0.72 mg cm⁻²) sintering at 1,000 °C for 2 h shows lower polarization resistance of 0.183 Ω cm² at 800 °C. Based on the optimized parameters, the polarization resistances of the L58SCF–Ce_0.8Gd_0.2O_{1.9 – δ} composite cathode display the R _p values of 0.067 Ω cm² at 800 °C, 0.106 Ω cm² at 750 °C, 0.225 Ω cm² at 700 °C, and 0.550 Ω cm² at 650 °C.     

Cellulases and Xylanases Production by <Emphasis Type="Italic">Penicillium echinulatum</Emphasis> Grown on Sugar Cane Bagasse in Solid-State Fermentation

To investigate the production of cellulases and xylanases from Penicillium echinulatum 9A02S1, solid-state fermentation (SSF) was performed by using different ratios of sugar cane bagasse (SCB) and wheat bran (WB). The greatest filter paper activity obtained was 45.82 ± 1.88 U gdm⁻¹ in a culture containing 6SCB/4WB on the third day. The greatest β-glucosidase activities were 40.13 ± 5.10 U gdm⁻¹ obtained on the third day for the 0SCB/10WB culture and 29.17 ± 1.06 U gdm⁻¹ for the 2SCB/8WB culture. For endoglucanase, the greatest activities were 290.47 ± 43.57 and 276.84 ± 15.47 U gdm⁻¹, for the culture 6SCB/4WB on the fourth and fifth days of cultivation, respectively. The greatest xylanase activities were found on the third day for the cultures 6SCB/4WB (36.38 ± 5.38 U gdm⁻¹) and 4SCB/6WB (37.87 ± 2.26 U gdm⁻¹). In conclusion, the results presented in this article showed that it was possible to obtain large amounts of cellulases and xylanases enzymes using low-cost substrates, such as SCB and WB.     

A rapid fluorescence polarization immunoassay for the determination of T-2 and HT-2 toxins in wheat

A rapid fluorescence polarization (FP) immunoassay has been developed for the simultaneous determination of T-2 and HT-2 toxins in naturally contaminated wheat samples. Syntheses of four fluorescein-labelled T-2 or HT-2 toxin tracers were carried out and their binding response with seven monoclonal antibodies was evaluated. The most sensitive antibody-tracer combination was obtained by using an HT-2-specific antibody and a fluorescein-HT-2 tracer. The developed competitive FP immunoassay in solution showed high cross-reactivity for T-2 toxin (CR% = 100%) while a very low CR% for neosolaniol (0.12%) and no cross-reactivity with other mycotoxins frequently occurring in wheat. A rapid extraction procedure using 90% methanol was applied to wheat samples prior to FP immunoassay. The average recovery from spiked wheat samples (50 to 200 μg kg⁻¹) was 96% with relative standard deviation generally lower than 8%. A limit of detection of 8 μg kg⁻¹ for the combined toxins was determined. Comparative analyses of 45 naturally contaminated and spiked wheat samples by both the FP immunoassay and high-performance liquid chromatography/immunoaffinity clean-up showed a good correlation (r = 0.964). These results, combined with the rapidity (10 min) and simplicity of the assay, show that this method is suitable for high throughput screening as well as for quantitative determination of T-2 and HT-2 toxins in wheat.     

Fast screening immunoassay of sulfonamides in commercial fish samples

An indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed in plate to detect three sulfonamide residues (sulfamerazine (SMR), sulfadimetoxine (SDM), and sulfadiazine (SDZ)) in gilthead sea bream (Sparus aurata) samples. Different extraction methodologies—using methanol/water 1:1 (v/v) + ethylene diamine tetraacetic acid (EDTA) 0.5% (m/v), acetonitrile, phosphate-buffered saline (PBS) 10 mmol L⁻¹ pH 7 and acetate buffer 100 mmol L⁻¹ pH 5—and cleanup steps, based on solid-phase extraction (C₁₈, SCX, Si) or liquid extraction with hexane, were assayed. As optimum, a fast and simple method using acetonitrile was selected to extract the sulfonamide residues from the edible muscle of fish. Due to matrix effects, a standard addition calibration curve in fish extract is necessary for quantification purposes. Sulfonamide-free samples were spiked at different concentration levels (between 30 and 90 ng g⁻¹, 5–15 ng mL⁻¹ in plate) and average recoveries (n = 8), ranging from 71% to 95%, 65% to 79%, and 72% to 95%, were obtained for SMR, SDM, and SDZ, respectively. The assay detection limits for these antibiotics were lower than 100 μg kg⁻¹ (maximum residue level established by the European Union). The accuracy was evaluated by spiking blank fish extracts at different concentrations (10–40 ng mL⁻¹, 5–20 ng mL⁻¹ in plate), and the relative errors ranged between ±20%. Finally, in order to confirm the utility of the developed ELISA as a screening methodology, fish samples from different supermarkets were analyzed, and results were compared with those obtained by a validated high-performance liquid chromatography (HPLC) method. The correlation between the results obtained by both ELISA and HPLC methods is satisfactory.      

Dispersive liquid–liquid microextraction coupled to liquid chromatography for thiamine determination in foods

A miniaturized dispersive liquid–liquid microextraction (DLLME) procedure coupled to liquid chromatography (LC) with fluorimetric detection was evaluated for the preconcentration and determination of thiamine (vitamin B₁). Derivatization was carried out by chemical oxidation of thiamine with 5 × 10⁻⁵ M ferricyanide at pH 13 to form fluorescent thiochrome. For DLLME, 0.5 mL of acetonitrile (dispersing solvent) containing 90 μL of tetrachloroethane (extraction solvent) was rapidly injected into 10 mL of sample solution containing the derivatized thiochrome and 24% (w/v) sodium chloride, thereby forming a cloudy solution. Phase separation was carried out by centrifugation, and a volume of 20 μL of the sedimented phase was submitted to LC. The mobile phase was a mixture of a 90% (v/v) 10 mM KH₂PO₄ (pH 7) solution and 10% (v/v) acetonitrile at 1 mL min⁻¹. An amide-based stationary phase involving a ligand with amide groups and the endcapping of trimethylsilyl was used. Specificity, linearity, precision, recovery, and sensitivity were satisfactory. Calibration graph was carried out by the standard additions method and was linear between 1 and 10 ng mL⁻¹. The detection limit was 0.09 ng mL⁻¹. The selectivity of the method was judged from the absence of interfering peaks at the thiamine elution time for blank chromatograms of unspiked samples. A relative standard deviation of 3.2% was obtained for a standard solution containing thiamine at 5 ng mL⁻¹. The esters thiamine monophosphate and thiamine pyrophosphate can also be determined by submitting the sample to successive acid and enzymatic treatments. The method was applied to the determination of thiamine in different foods such as beer, brewer’s yeast, honey, and baby foods including infant formulas, fermented milk, cereals, and purees. For the analysis of solid samples, a previous extraction step was applied based on an acid hydrolysis with trichloroacetic acid. The reliability of the procedure was checked by analyzing a certified reference material, pig’s liver (CRM 487). The value obtained was 8.76 ± 0.2 μg g⁻¹ thiamine, which is in excellent agreement with the certified value, 8.6 ± 1.1 μg g⁻¹.     

Preparation and certification of arsenate [As(V)] reference material, NMIJ CRM 7912-a

Arsenate [As(V)] solution reference material, National Metrology Institute of Japan (NMIJ) certified reference material (CRM) 7912-a, for speciation of arsenic species was developed and certified by NMIJ, the National Institute of Advanced Industrial Science and Technology. High-purity As₂O₃ reagent powder was dissolved in 0.8 M HNO₃ solution and As(III) was oxidized to As(V) with HNO₃ to prepare 100 mg kg^-1 of As(V) candidate CRM solution. The solution was bottled in 400 bottles (50 mL each). The concentration of As(V) was determined by four independent analytical techniques—inductively coupled plasma mass spectrometry, inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and liquid chromatography inductively coupled plasma mass spectrometry—according to As(V) calibration solutions, which were prepared from the arsenic standard of the Japan Calibration Service system and whose species was guaranteed to be As(V) by NMIJ. The uncertainties of all the measurements and preparation procedures were evaluated. The certified value of As(V) in the CRM is (99.53 ± 1.67) mg kg^-1 (k = 2).     

Development and validation of a sensitive,simple, and rapid method for simultaneous quantitation of atorvastatin and its acid and lactone metabolites by liquid chromatography-tandem mass spectrometry (LC-MS/MS)

The aim of the proposed work was to develop and validate a simple and sensitive assay for the analysis of atorvastatin (ATV) acid, ortho- and para-hydroxy-ATV, ATV lactone, and ortho- and para-hydroxy-ATV lactone in human plasma using liquid chromatography-tandem mass spectrometry. All six analytes and corresponding deuterium (d5)-labeled internal standards were extracted from 50 μL of human plasma by protein precipitation. The chromatographic separation of analytes was achieved using a Zorbax-SB Phenyl column (2.1 mm × 100 mm, 3.5 μm). The mobile phase consisted of a gradient mixture of 0.1% v/v glacial acetic acid in 10% v/v methanol in water (solvent A) and 40% v/v methanol in acetonitrile (solvent B). All analytes including ortho- and para-hydroxy metabolites were baseline-separated within 7.0 min using a flow rate of 0.35 mL/min. Mass spectrometry detection was carried out in positive electrospray ionization mode, with multiple-reaction monitoring scan. The calibration curves for all analytes were linear (R ² ≥ 0.9975, n = 3) over the concentration range of 0.05–100 ng/mL and with lower limit of quantitation of 0.05 ng/mL. Mean extraction recoveries ranged between 88.6–111%. Intra- and inter-run mean percent accuracy were between 85–115% and percent imprecision was ≤ 15%. Stability studies revealed that ATV acid and lactone forms were stable in plasma during bench top (6 h on ice-water slurry), at the end of three successive freeze and thaw cycles and at −80 °C for 3 months. The method was successfully applied in a clinical study to determine concentrations of ATV and its metabolites over 12 h post-dose in patients receiving atorvastatin.     

Liquid chromatography–mass spectrometric determination of plasmalogens in human plasma

A new liquid chromatography–mass spectrometry (LC/MS) method has been developed for the quantitative analysis of plasmalogens in human plasma using a nonendogenous plasmalogen (1-O-1′-(Z)-tricosenyl-2-oleoyl-rac-glycero-3-phosphocholine, PLS 23:0/18:1) as an internal standard. 1-O-1′-(Z)-Tricosenyl glyceryl ether was prepared by reacting lithioalkoxyallyl with 1-iodoeicosane as the key intermediate in the formation of PLS 23:0/18:1. In LC/MS analyses, PLS 23:0/18:1 generated significant fragment ions in positive and negative modes. In positive ion mode, the [M+H]⁺ of PLS 23:0/18:1 yielded unique fragments with cleavages at the sn-1 and sn-2 positions of the glycerol backbone. In negative ion mode, the [M+CH₃COO]⁻ of PLS 23:0/18:1 resulted in characteristic fragmentation at the sn-2 and sn-3 positions. 1-O-1′-(Z)-Hexadecenyl-2-linoleoyl-rac-glycero-3-phosphocholine (PLS 16:0/18:2) and 2-arachidonoyl-O-1′-(Z)-hexadecenyl-rac-glycero-3-phosphocholine (PLS 16:0/20:4) were chemically synthesized as PLS 23:0/18:1. The calibration curves obtained for PLS 16:0/18:2 and PLS 16:0/20:4 were linear throughout the calibration range (0.04–1.60 pmol). The LOD (S/N = 5:1) was 0.008 pmol and the LOQ (S/N = 6:1) was 0.01 pmol for both PLS 16:0/18:2 and PLS 16:0/20:4. Plasma concentrations of PLS 16:0/18:2 and PLS 16:0/20:4 were 4.0 ± 1.3 μM and 3.5 ± 1.2 μM (mean ± SD), respectively, in five healthy volunteers.     

Immunomagnetic microbeads for screening with flow cytometry and identification with nano-liquid chromatography mass spectrometry of ochratoxins in wheat and cereal

Multi-analyte binding assays for rapid screening of food contaminants require mass spectrometric identification of compound(s) in suspect samples. An optimal combination is obtained when the same bioreagents are used in both methods; moreover, miniaturisation is important because of the high costs of bioreagents. A concept is demonstrated using superparamagnetic microbeads coated with monoclonal antibodies (Mabs) in a novel direct inhibition flow cytometric immunoassay (FCIA) plus immunoaffinity isolation prior to identification by nano-liquid chromatography–quadrupole time-of-flight-mass spectrometry (nano-LC-Q-ToF-MS). As a model system, the mycotoxin ochratoxin A (OTA) and cross-reacting mycotoxin analogues were analysed in wheat and cereal samples, after a simple extraction, using the FCIA with anti-OTA Mabs. The limit of detection for OTA was 0.15 ng/g, which is far below the lowest maximum level of 3 ng/g established by the European Union. In the immunomagnetic isolation method, a 350-times-higher amount of beads was used to trap ochratoxins from sample extracts. Following a wash step, bound ochratoxins were dissociated from the Mabs using a small volume of acidified acetonitrile/water (2/8 v/v) prior to separation plus identification with nano-LC-Q-ToF-MS. In screened suspect naturally contaminated samples, OTA and its non-chlorinated analogue ochratoxin B were successfully identified by full scan accurate mass spectrometry as a proof of concept for identification of unknown but cross-reacting emerging mycotoxins. Due to the miniaturisation and bioaffinity isolation, this concept might be applicable for the use of other and more expensive bioreagents such as transport proteins and receptors for screening and identification of known and unknown (or masked) emerging food contaminants.     

Development of a liquid chromatography-mass spectrometry method for the determination of ursolic acid in rat plasma and tissue: application to the pharmacokinetic and tissue distribution study

A fast and sensitive liquid chromatography–mass spectrometry method was developed for the determination of ursolic acid (UA) in rat plasma and tissues. Glycyrrhetinic acid was used as the internal standard (IS). Chromatographic separation was performed on a 3.5 μm Zorbax SB-C18 column (30 mm × 2.1 mm) with a mobile phase consisting of methanol and aqueous 10 mM ammonium acetate using gradient elution. Quantification was performed by selected ion monitoring with (m/z)⁻ 455 for UA and (m/z)⁻ 469 for the IS. The method was validated in the concentration range of 2.5 − 1470 ng mL⁻¹ for plasma samples and 20 − 11760 ng g⁻¹ for tissue homogenates. The intra- and inter-day assay of precision in plasma and tissues ranged from 1.6% to 7.1% and 3.7% to 9.0%, respectively, and the intra- and inter-day assay accuracy was 84.2 − 106.9% and 82.1 − 108.1%, respectively. Recoveries in plasma and tissues ranged from 83.2% to 106.2%. The limits of detections were 0.5 ng mL⁻¹ or 4.0 ng g⁻¹. The recoveries for all samples were >90%, except for liver, which indicated that ursolic acid may metabolize in liver. The main pharmacokinetic parameters obtained were T _max = 0.42 ± 0.11 h, C _max = 1.10 ± 0.31 μg mL⁻¹, AUC = 1.45 ± 0.21 μg h mL⁻¹ and K _a = 5.64 ± 1.89 h⁻¹. The concentrations of UA in rat lung, spleen, liver, heart, and cerebellum were studied for the first time. This method is validated and could be applicable to the investigation of the pharmacokinetics and tissue distribution of UA in rats.