Phase equilibria in the Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–CdO system and the thermal stability of Cd<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and CdNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Phase equilibria were studied in the Nb₂O₅–CdO system in the Nb₂O₅-rich region including CdNb₂O₆ and Cd₂Nb₂O₇. It was determined that CdNb₂O₆ and Cd₂Nb₂O₇ in air are stable to 1150 and 1120°C, respectively, and that, above these temperatures, there is solid-phase decomposition of niobates with CdO release in the gas phase. Along with the cadmium oxide evaporation, the Cd₂Nb₂O₇ decomposition is accompanied by the formation of cadmium metaniobate CdNb₂O₆ and the CdNb₂O₆ decomposition results in the formation of niobium oxide Nb₂O₅. No thermal events were observed in the differential thermal analysis curve for a 1: 1 CdNb₂O₆–Cd₂Nb₂O₇ mixture heated to 1100°C in air, which suggests that there are neither phase transformations in cadmium niobates, nor a eutectic within this temperature and concentration ranges. A study of the morphology of compacted samples of niobates determined specific conditions for producing dense composite ceramics, a mixture of niobates, that is suitable for using as a dielectric material.     

Glass Formation in the Ternary System La<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>S<Subscript>3</Subscript>–Er<Subscript>2</Subscript>O<Subscript>3</Subscript>

The boundaries of the glass formation region in the ternary system La₂O₃–As₂S₃–Er₂O₃ were found. Transparent glass of composition (La₂O₃)_0.03(As₂S₃)0.90(Er₂O₃)0.07 was studied by X-ray photoelectron and Raman spectroscopy. The intensities of the bands characterizing As–S, La–O, and Er–O bonds increased, and these bands were shifted toward higher energies. This was due to an increase in the covalence of these bonds and probably due to the formation of new bonds in the glasses. Samples in the glass formation region are resistant at 300 K to air, water, and organic solvents.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

New continuous solid solution in the Zn<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript>–Mg<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript> system

In this study, mechanical activation process was used for intimate mixing as well as producing finely ground particles, increased surface area and improved chemical reactivity of milled materials for producing SrTiO₃ from commercially pure strontium carbonate and TiO₂ as a contributive process. Characterization of milled powder mixture by X-ray diffraction analysis showed that disappearing, decreasing and/or shifting of the patterns occurred with mechanical activation that means amorphization was taken place. Amorphization was also demonstrated by FT-IR analysis where shift of band centers as well as the decrement of transmittance related to CO₃ was observed. Advantage of amorphization was established with high-temperature XRD analysis which showed 1300 °C was not enough for non-activated mixture to form SrTiO₃, whereas structure only composed of SrTiO₃ at 1000 °C for activated ones. The reason for this phenomenon was investigated by DTA-TG analysis, and it was based on energy accumulation originated from mechanical activation that corresponds to peak temperature shifting to the lower temperatures and CO₂ liberation at mechanical activation step arising from local temperature rising at the vial during high-energy milling that was understood from peak temperature, and area decrement of endothermic peak corresponds to decomposition of SrCO₃.     

Modifying additives affect the properties of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The effects caused by modifying additives, namely nonionic surfactants (Tween 80 and Neonol AF 9-6) and oxides (B₂O₃ and HfO₂), on the rheology, film formation, and phase formation in the yttrium aluminum silicate system prepared by sol–gel technology were studied. The effect of 1 wt % HfO₂ additions on the activation energy of crystallization was studied.     

Concentration Space of Homogeneous Garnet in the System Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–(Y,Bi)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The concentration space of homogeneous garnet in the system Ga₂O₃–(Y, Bi)₃(Fe, Ga)₅O₁₂–Fe₂O₃ was determined by X-ray powder diffraction analysis. The obtained results expand the knowledge of the possible variations of cation ratios Y : Bi : Fe : Ga in garnet, which can be used for searching for and creating new stable magneto-optical materials.     

Synthesis and heat capacity study of stannates Dy<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> in the range 370–1000 K

Stannates Dy₂Sn₂O₇ and Ho₂Sn₂O₇ are produced by solid-phase synthesis from Dy₂O₃ (Ho₂O₃)–SnO₂ stoichiometric mixtures by calcining at 1473 K. The molar heat capacity of holmium and dysprosium stannates is measured by differential scanning calorimetry (DSC) in the temperature range 370–1000 K. The experimental data are used to calculate thermodynamic properties (enthalpy change H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and the reduced Gibbs free energy Φ°(T)) of the synthesized compound.     

On the Control of Plasma Parameters and Active Species Kinetics in CF<Subscript>4</Subscript> + O<Subscript>2</Subscript> + Ar Gas Mixture by CF<Subscript>4</Subscript>/O<Subscript>2</Subscript> and O<Subscript>2</Subscript>/Ar Mixing Ratios

The effects of both CF₄/O₂ and Ar/O₂ mixing ratios in three-component CF₄ + O₂ + Ar mixture on plasma parameters, densities and fluxes of active species determining the dry etching kinetics were analyzed. The investigation combined plasma diagnostics by Langmuir probes and zero-dimensional plasma modeling. It was found that the substitution of CF₄ for O₂ at constant fraction of Ar in a feed gas produces the non-monotonic change in F atom density, as it was repeatedly reported for the binary CF₄/O₂ gas mixtures. At the same time, the substitution of Ar for O₂ at constant fraction of CF₄ results in the monotonic increase in F atom density toward more oxygenated plasmas. The natures of these phenomena as well as theirs possible impacts on the etching/polymerization kinetics were discussed in details.     

Structural and Temperature Dependent Electrical Conductivity Properties of Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> CO-Doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

In the present work, Dy₂O₃ and Sm₂O₃ double-doped Bi₂O₃-based materials are synthesized by exploiting the solid-state synthesis method. The structural and temperature dependent electrical properties of these ternary ceramic samples, which are candidate materials for solid oxide fuel cell (SOFCs) electrolyte, are determined by means of a powder X-ray diffractometer (XRD), the four point-probe method (FPPM), and the thermal-gravimetry/differential thermal analysis (TG/DTA). As a result of the XRD measurements, the fluorite-type fcc δ-phase with a stable structure is obtained for higher values of the dopant oxide material, which are the samples with the maximum content of fixed 20% Dy₂O₃ and 15% and 20% Sm₂O₃. The samples with the stable δ-phase structure have higher conductivities. The highest electrical conductivity is found for the (Bi₂O₃)0.6(Dy₂O₃)_0.2(Sm₂O₃)_0.2 sample, which was 2.5×10^–2 (Ohm cm)^–1 at 750 °C. The activation energies are also calculated from the Arrhenius charts, which were determined from the FPPM measurements. The lowest activation energy is found as 0.85 eV for the sample with the highest electrical conductivity.     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Atmospheric control of gel-oxide transformation in sol–gel derived Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> fibers

Via sol–gel processing metal–organic fibers were produced and dried up to 140 °C. For these gel fibers the influence of a treatment in different atmospheres was investigated for the temperature range of 200–850 °C. The atmospheres were nitrogen, water vapor, evaporated nitric and hydrochloric acid and evaporated hydrogen peroxide. In the presence of moisture and especially with acidic moisture fibers were transformed almost completely to their oxide composition (82 mol% Al₂O₃·18 mol% Y₂O₃). In these inorganic amorphous structures considerable differences were observed on several structural levels. On the atomic scale, the coordination of Al ions was investigated by ²⁷Al MAS NMR and skeletal density by He-pycnometry. Porosity in the nm scale was characterized by N₂-sorption. As a macroscopic effect of different treatment atmospheres, the longitudinal shrinkage was observed. For fibers treated at 500 °C the relative shrinkage varied by 100% (comparing water vapor and nitrogen atmosphere). No simple correlation between the release of organic constituents, the formation of porosity and the shrinkage could be found. These aspects were controlled by the rigidity of the inorganic network against atomic reconstitution. The kind of atmosphere was found to be an effective parameter to control various aspects of the xerogel structure.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Distribution of niobium and lanthanum between two immiscible melts in the system LaPO<Subscript>4</Subscript>–SiO<Subscript>2</Subscript>–NaF–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The system LaPO₄–SiO₂–NaF–Nb₂O₅–Fe₂O₃ is characterized by immiscibility fields in the liquid state region. Addition of iron expands fields of immiscibility of melts and decreases the temperature of their coexistence. A fraction of 87–90% of niobium is extracted into iron silicate melt, and 92–98% of lanthanum is extracted into phosphate salt melt.     

Pd/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for the selective liquid-phase hydrogenation of acetylene to ethylene

The structure of Ga₂O₃–Al₂O₃ supports and Pd/Ga₂O₃–Al₂O₃ catalysts and the performance of these catalysts in liquid-phase acetylene hydrogenation have been investigated. The deposition of Ga(NO₃)₃ onto Al₂O₃ by impregnation followed by calcination of the impregnated support at 600°C yields γ-Ga₂O₃–Al₂O₃ solid solutions containing up to 50 wt % Ga₂O₃. X-ray diffraction characterization of model palladium catalysts and their temperature-programmed reduction with hydrogen have demonstrated that, while palladium in Pd/Ga₂O₃ is in the form of a Pd₂Ga alloy, in the Pd/γ-Ga₂O₃–Al₂O₃ catalyst there is no direct interaction between PdО and Ga₂O₃ particles and palladium is in the monometallic state. The introduction of 10–20 wt % gallium oxide into Al₂O₃ lowers the activity of the supported palladium catalyst relative to that of the initial Pd/Al₂O₃ but increases the ethylene yield by enhancing the ethylene formation selectivity.     

Thermoelectric power and electrochemical studies on CdI<Subscript>2</Subscript>–Ag<Subscript>2</Subscript>O–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

A quaternary super-ion-conducting system, 20CdI₂ − 80[xAg₂O − y(0.7V₂O₅ − 0.3B₂O₃)] where 1 ≤ x/y ≤ 3, has been prepared by melt quenching technique. The electrical conductivity measured was the order of 10⁻⁴  S/cm at room temperature. The values of silver-ion transport number obtained by electromotive force technique are nearly unity. The thermoelectric power and electrochemical studies were done on the CdI₂–Ag₂O–V₂O₅–B₂O₃ system. The discharge and polarization characteristics were examined for different cathodes to evaluate the utility of these cells as power sources for low energy applications.     

Oxidation of Adamantane with H<Subscript>2</Subscript>O<Subscript>2</Subscript>–CF<Subscript>3</Subscript>COCF<Subscript>3</Subscript> · 1.5 H<Subscript>2</Subscript>O in the Presence of VO(acac)<Subscript>2</Subscript>

The system hydrogen peroxide–hexafluoroacetone sesquihydrate effectively oxidizes adamantane in the presence of VO(acac)₂ to afford 64% of adamantan-1-ol in tert-butyl alcohol or 76% of adamantan-2-one in a mixture of acetic acid with pyridine.     

Crystal structure of Cs[(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)] · H<Subscript>2</Subscript>O

Single crystals of Cs[(UO₂)₂(C₂O₄)₂(OH)] · H₂O were synthesized and structurally studied using X-ray diffraction. The compound crystallizes in monoclinic space group P2₁/m, Z = 2, with the unit cell parameters a = 5.5032(4) Å, b = 13.5577(8) Å, c = 9.5859(8) Å, β = 97.012(3)°, V = 709.86(9) ų, R = 0.0444. The main building units of crystals are [(UO₂)₂(C₂O₄)₂(OH)]^? layers of the A₂K ₂ ⁰² M² (A = UO ₂ ²⁺ , K⁰² = C₂O ₄ ^2? , and M² = OH^?) crystal-chemical family. Uranium-containing layers are linked into a three-dimensional framework via electrostatic interactions with outer-sphere cations and hydrogen bonds with water molecules.     

Crystal structure of Ba<Subscript>3</Subscript>[UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(NCS)]<Subscript>2</Subscript> · 9H<Subscript>2</Subscript>O

Single crystals of Ba₃[UO₂(C₂O₄)₂(NCS)]₂ · 9H₂O are synthesized and studied by X-ray diffraction. The crystals are orthorhombic, space group Fddd, Z = 16, and the unit cell parameters are a = 16.253(3) Å, b = 22.245(3) Å, c = 39.031(6) Å. The main crystal structural units are mononuclear complex groups [UO₂(C₂O₄)₂NCS]^3? of the crystal-chemical family (AB ₂ ⁰¹ M¹ (A = UO ₂ ²⁺ , B⁰¹ = C₂O ₄ ^2? , M¹ = NCS^?) of the uranyl complexes linked into a three-dimensional framework by electrostatic interactions and hydrogen bonds involving oxalate ions and water molecules.