Facile synthesis of enantiopure 1,1′-binaphthyl-2,2′-dicarboxylic acid via lipase-catalyzed kinetic resolution

Enantiopure 1,1′-binaphthyl-2,2′-dicarboxylic acids (R)-1 and (S)-1 have been synthesized through the lipase-catalyzed kinetic resolution of the racemic 2,2-bis(hydroxymethyl)-1,1′-binaphthyl (±)-2 and subsequent oxidation of the hydroxymethyl groups.     

Intramolekulare Cycloaddition von [1,1′-Binaphthyl]-2,2′-bis(allylamin)

Intramolecular cycloaddition of [1,1′-binaphthyl]-2,2′-bis(allylamine) Unlike the 1,1′-binaphthyl-2,2′-bis(allylether) the corresponding [1,1′-binaphthyl]-2,2′-bis(allylamine) (1) upon heating to 230° in mesitylene undergoes thermal decomposition only. However, when 1 is heated in a mixture of 2-methylaminoethanol and water, besides 3 the policyclic ketones 4 and 5 are formed in isolated yields of 28 and 10%, respectively (Scheme 1). Intermediates are the imines corresponding to 4 and 5 which are hydrolysed under the reaction conditions rather than decomposed. The imines are formed by a intramolecular Diels-Alder reaction, in which the double bond of one N-allylgroup reacts with the naphthalene ring of the second half of the molecule. The policyclic ketones 4 and 5 are characterized as acetates 6 and 7 , respectively, and as the acetylated reduced products 11 , and 12 and 13 , respectively. The constitutions of all compounds are derived from spectroscopic data, chiefly from the ¹H-NMR. spectra.     

3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮的合成

在对甲苯磺酸存在下，采用1,1-二[4-(N,N-二取代氨基)苯基]乙烯(3)和四氯苯酐在乙酸酐溶液中的缩合反应合成了3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮(4)，产率89～93%。3由4,4'-二(N,N-二取代氨基)二苯甲酮(1)与甲基碘化镁进行Grignard反应的产物经水解再脱水制得，产率85%～88.5%(以1为基准)。     

Synthesis of 1,1′-methylenedi[(1R,1′R,3R,3′R,5R,5′R)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] and derivatives: precursors of long-chain polyketides

Racemic 1,1′-methylene[(1RS,1′RS,3RS,3′RS,5RS,5′RS)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] ((±)-6) derived from 2,2′-methylenedifuran has been resolved kinetically with Candida cyclindracea lipase-catalysed transesterification giving 1,1′-methylenedi[(1R,1′R,3R,3′R,5R,5′R)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] (−)-6 (30% yield, 98% ee) and 1,1′-methylenedi[(1S,1′S,3S,3′S,5S,5′S)-8-oxabicyclo[3.2.1]oct-6-en-3-yl] diacetate (+)-8, (40% yield, 98% ee). These compounds have been converted into 1,1′-methylenedi[(4S,4′S,6S,6′S)- and (4R,4′R,6R,6′R)-cyclohept-1-en-4,6-diyl] derivatives.     

Preparation of 1,1′-binaphthyl-2,2′-diyl bridged ansa-bis( annulated cyclopentadienyl) titanium and -zirconium dichloride complexes

The coupling of enantiomerically enriched 2,2′-dilithio-1,1′-binaphthyl with various annulated cyclopentenones or 2-indanone proves to be a facile route for the preparation of a series of annulated bis(cyclopentadienes) or bis(indenes) bridged at a symmetrical cyclopentadienyl position. The six- or seven-membered annulated bis(tetrahydroindene) 6 or bis(hexahydroazulene) 7 ligands could readily be converted to titanium or zirconium dichloride complexes. Owing to the symmetry of the ligands, only a single C₂-symmetrical isomer of the metallocene dichloride could form. Although the faces of the cyclopentadienyl moieties are homotopic, the chiral bridge enforces a chiral conformation of the metallocene complexes. The bis(indenyl) 5 or five-membered annulated bis(tetrahydropentalene) 8 ligands could not be metalated. Unbridged 2-methyl and 2-phenyl substituted tetrahydropentalenes 27 and 28 were prepared and could readily be converted to titanium dichloride complexes.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

BINAS - synthesis and use of a new ligand for propylene hydroformylation

BINAS is a new, very efficient ligand for propylene hydroformylation. BINAS is made by the sulfonation of NAPHOS. Different synthetic routes to NAPHOS are discussed. A new two step synthesis starting from 2,2′-bis(bromomethyl)-1,1′-binaphthyl is described.     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Biphasic asymmetric hydroformylation and hydrogenation by water-soluble rhodium and ruthenium complexes of sulfonated (R)-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl in ionic liquids

A biphasic catalytic system with water-soluble rhodium complexes of sulfonated (R)-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (labeled as (R)-BINAPS) in ionic liquid BMI·BF₄ has been developed for the asymmetric hydroformylation of vinyl acetate under mild conditions. The corresponding ruthenium complexes have been investigated for the biphasic asymmetric hydrogenation of dimethyl itaconate. The biphasic asymmetric hydroformylation of vinyl acetate provided 28.2% conversion and 55.2% enantiomeric excess when BMI·BF₄–toluene was used as the reaction medium at 333 K and 1.0 MPa for 24 h. The biphasic asymmetric hydrogenation of dimethyl itaconate in BMI·BF₄–ⁱPrOH at 333 K and 2.0 MPa afforded 65% enantiomeric excess with an activity similar to the homogenous analogs. Both biphasic catalytic systems with (R)-BINAPS ligand could be reused several times without significantly decrease in the activity, enantio- and regio-selectivities. The effects of properties of ionic liquid, molar ratio of ligand to rhodium, temperature, pressure and reaction time have been discussed.     

Synthesis and rapid enantiomeric separation of the chiral mixed ligand [5-(4-hydroxybutyl)-5′-methyl-2,2′-bipyridine]-bis(1,10-phenanthroline)-ruthenium(II) complex by electrokinetic chromatography

The chiral complex [5-(4-hydroxybutyl)-5′-methyl-2,2′-bipyridine]-bis(1,10-phenanthroline)ruthenium(II)-bis(hexafluoroantimonate) was successfully synthesized and fully characterized by two-dimensional ¹H and ¹³C{¹H} NMR techniques (COSY and HMQC) as well as EA- and FAB-MS. A very fast separation of the Δ and Λ enantiomers with excellent efficiency and resolution was achieved by electrokinetic chromatography using anionic carboxymethyl-β-cyclodextrin as a chiral mobile phase additive. The optimum separation conditions were obtained with 50 mM borate buffer at pH 9 and 10 mg/ml of the chiral selector at 20°C. Attempts to separate the well known unmodified tris(2,2′-bipyridine)ruthenium(II) [Ru(bpy)₃] complex into its enantiomers under the same conditions were unsuccessful.     

Synthesis and characterisation of monomeric, dimeric and polymeric ferrocenylacetylides. Crystal structure of 1,1′-bis(phenylethynyl)ferrocene

The reactions of alkynyltrimethylstannanes with 1,1′-dilithioferrocene have given several ferrocenylacetylides, namely 1-pheny]-ethynyl-1′-iodo-ferrocene (1), 1,1′-bis(phenylethynyl)ferrocene (2), 1,4-di(1′-iodoferrocenylethynyl)benzene (3) and poly[1,4-(1′-ferrocenylethynyl)ethynylbenzene] (4). The versatility of this reaction for the formation of ferrocenylacetylides is demonstrated. The crystal structure of 2 has been determined, and shown to involve a linear array of the groups with a cis arrangement of the phenylethynyl ligands.     

二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基的合成

以1,4-环己二酮、丙二酸二乙酯及多元醇等为原料, 经过两次“一锅煮”法合成了六种二代螺环树形化合物1,2,3,4,5,6,7,8,9,10,11,12-十二氢-2,2;6,6;10,10-三[3,3-二(烷氧羰基)-1,1-环亚丁基二甲氧基]三亚苯基螺环树形化合物, 其中烷氧基为异戊氧基、三羟甲基甲氧基、2,2-二溴甲基-3-羟丙氧基、2,2-二羟甲基丙氧基、二羟甲基膦甲氧基和(N-羟甲基-N-二羟甲基氨基乙基)甲氧基. 利用IR, NMR, MS和元素分析对合成的化合物进行了结构认证, 对影响反应的因素进行了讨论.     

Resolution-free route to chiral 2,2-bis(pyridin-2-yl)-1,1-binaphthyl ligand: photochemical CpCo(CO)2-mediated cycloaddition of enantiopure 2,2-dicyano-1,1-binaphthyl with diynes

A resolution-free route to chiral 2,2^′-bis(pyridin-2-yl)-1,1^′-binaphthyl ligands 2 was developed for the first time based on the photochemical CpCo(CO)₂-mediated cycloaddition reaction of enantiopure 2,2^′-dicyano-1,1^′-binaphthyl 3 with 1,6-heptadiyne, 1,7-octadiyne, 1,8-nonadiyne, and 2,8-decadiyne.     

Synthesis and fungicidal activities of 1-[(2,2-diaryl-1,3-dioxolan-4-yl)methyl]-1H-azoles

Ketalization of benzophenones with epichlorohydrin or 3-chloropropane-1,2-diol gave 2,2-diaryl-4-chloromethyl-1,3-dioxolanes, which were used to alkylate sodium salts of imid-azole or 1,2,4-triazole. The resulting 1-[(2,2-diaryl-1,3-dioxolan-4-yl)methyl]-1H-azoles exhibit high fungicidal activities. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 940–944, May, 2007.     

Synthesis and some heterocyclization reactions of new diethyl (1,1-difluoro-3,3-dicyano-2-trifluoromethylallyl)phosphonate and ethyl 3,3-dicyano-2-[(diethoxyphosphoryl)difluoromethyl]acrylate

A new CF₂X-analogue of 1,1-bis(trifluoromethyl)-2,2-dicyanoethylene (X = P(O)(OEt)₂), diethyl (1,1-difluoro-3,3-dicyano-2-trifluoromethylallyl)phosphonate, has been synthesized from diethoxyphosphoryl pentafluoroacetone 1. A similar phosphoryl analogue of ethyl 3,3-dicyano-2-trifluoromethylacrylate, ethyl 3,3-dicyano-2-[(diethoxyphosphoryl)difluoromethyl]acrylate, has been obtained from ethyl 3-(diethoxyphosphoryl)-3,3-difluoro-2-oxopropionate 2. By heterocyclization of these new ethylenes with 3-methyl-2-pyrazoline-5-ones, 3(5)-aminopyrazoles, dimedone, 2-aminopyridines, 1-aryl-3-methyl-5-aminopyrazoles, 1,3,3-trimethylisoquinolines, as well as by condensation with anilines and ketones, the difluoromethylphosphonate-substituted derivatives of 1,4-dihydropyrano[2,3-c]pyrazole, 4,5-dihydropyrazolo[1,5-a]pyrimidine, 5,6,7,8-tetrahydro-4H-chromene, 2H-pyrido[1,2-a]pyrimidine, 4,7-dihydro-1H-pyrazolo[3,4-b]pyridine, 1,4-dihydropyridine, 4,5,6,7-tetrahydro-1H-[1]pyrindine, 1,4,5,6,7,8-hexahydroquinoline, and 6,7-dihydro-2H-pyrido[2,1-a]isoquinoline have been obtained in one stage.     

Efficient kinetic resolution of a racemic 7-membered biaryl lactone: enantioselective synthesis of 2,2′-dihydroxymethyl-1,1′-binaphthyl

A novel pathway to enantiomerically pure 2,2′-dihydroxymethyl-1,1′-binaphthyl is described, through kinetic resolution of its racemic 7-membered biaryl lactone precursor. Oxazaborolidine-assisted borane reduction of this lactone proceeds with very high enantioselectivity (k_rel=50). For optimum results on a preparative scale, a ‘three fractions strategy’ is suggested, which combines kinetic resolution and fractional crystallization and leads to both atropisomers in high enantiomeric excess.     

Synthesis and properties of soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride and aromatic diamines

Aromatic tetracarboxylic dianhydride having crank and twisted noncoplanar structure, 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with 2,2′-dihydroxy-1,1′-binaphthyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). Binaphthyl-2,2′-diyl–containing novel aromatic polyimides having inherent viscosities up to 0.67 dL/g were obtained by the one-step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and pyridine. These aromatic polyimides had glass transition temperatures in the range of 280–350°C, depending on the nature of the diamine moiety. All polymers were stable up to 400°C, with 10% weight loss being recorded above 485°C in air. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1937–1943, 1998     

Synthesis and X-ray crystal structures of rac- and meso-2,2′-propylidene-bis(1-indenyl) zirconium dichlorides

An improved synthesis of 2,2′-bis(1-indenyl)propane and the corresponding ansa-complexes of zirconium are reported. Synthesis of a mixture of rac- and meso-2,2′-propylidene-bis(1-indenyl)zirconium dichlorides involves a treatment of ZrCl₄ with bis[3-(trialkyltin)inden-1-yl]propane, where alkyl = ethyl, butyl, in toluene. This reaction gives the products in 92% yield and might be a convenient synthetic pathway to a number of straightforward ansa-metallocenes. Both rac- and meso-2,2′-propylidene-bis(1-indenyl)zirconium dichlorides were separated and isolated using simple work-up processes, and characterized by X-ray crystal structure analysis (rac:C2/c; a = 15.903(3) Å, b = 11.105(2) Å and c = 11.520(2) Å; β = 121.61(3)°; Z = 4; V = 1732.6(5) ų; R = 0.0350; meso-: P1¯; a = 9.739(2) Å, b = 12.798(4) Å and c = 15.322(4) Å; = 101.18(2)°; β = 121.61(2)°; γ = 90.54(2)°, Z = 4; V = 1795.4(8) ų; R = 0.0417).     

A novel trinuclear titanium(IV) complex with a C3 axis along Ti1–Ti2–Ti3 containing 3-[(1H-1,2,4-triazol-1-yl)methyl]-BINOLate ligands: synthesis,structure, and reactivity

A new modified BINOL, (S)-3-[(1H-1,2,4-triazol-1-yl)methyl]-1,1′-binaphthol, was prepared. In the presence of titanium tetraisopropoxide, this ligand showed moderate catalytic properties for the asymmetric addition of diethylzinc to aldehydes. By treating rac-3-[(1H-1,2,4-triazol-1-yl)methyl]-1,1′-binaphthol with excess titanium tetraisopropoxide, a novel trinuclear titanium(IV) complex was obtained. A C₃ axis along Ti1–Ti2–Ti3 is present in the molecule.