Determination of arsenic in gold by flow injection inductively coupled plasma mass spectrometry with matrix removal by reductive precipitation

Arsenic was determined in gold by flow injection hydride generation inductively coupled plasma-mass spectrometry following a batch mode reductive precipitation removal of the interfering gold matrix. A solution of potassium iodide, L-ascorbic acid, and hydrochloric acid was used as the reluctant. The recovery of gold by precipitation and filtration was 99 ± 3%. The detection limit for arsenic in gold was 55 ng g⁻¹ in the solid. The concentration of arsenic that was determined in the Royal Canadian Mint gold sample FAU-10 was 29.7 μg g⁻¹ in the solid; this value was indistinguishable, with 95% confidence, from values determined at the Royal Canadian Mint by graphite furnace atomic absorption spectrometry and by inductively coupled plasma-mass spectrometry. The standard deviation for four replicate determinations of the arsenic in FAU-10 was 0.972 μg g⁻¹ in the solid.     

Trace characterization of high-purity molybdenum and tungsten by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spectrometry involving analyte—matrix separation

A technique for the separation of 42 trace elements from up to 5 g of molybdenum and tungsten matrices was developed by means of the radiotracer technique. It is based on adsorption of the analyses on the cation exchanger Dowex 50 W x 9 from a 4% H₂O₂/0.01 mol 1⁻¹ HNO₃ solution followed by their elution with 15 ml of 4 mol I⁻¹ HNO₃ in the opposite flow direction. Both matrices were removed with a separation factor > 10⁴. The separation technique was applied to the analysis of these materials by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spetrometry. For all the determination methods used, the limits of detection are given and compared with those of other methods. With inductively coupled plasma mass spectrometry, for 22 of the 30 assayed elements, limits of detection at the sub-ng g⁻¹ level were achieved. The results are compared with those obtained by radiochemical neutron activation analysis in this work and by glow discharge mass spectrometry, secondary ion mass spectrometry, isotope dilution mass spectrometry and by solution spectrometric methods in other laboratories.     

Investigation of equilibration and uncertainty contributions for the determination of inorganic mercury and methylmercury by isotope dilution inductively coupled plasma mass spectrometry

The mass fractions of Hg and methylmercury, in two certified reference materials, NIST2710 and DORM-2, have been determined by total and species-specific isotope dilution analysis (IDA), respectively, and uncertainty budgets for each analysis calculated. The mass fraction of Hg in NIST2710 was determined by ID using multicollector sector field inductively coupled plasma mass spectrometry (MC-SF-ICP-MS) whilst the mass fraction of methylmercury in DORM-2 was determined using HPLC coupled with quadrupole ICP-MS.

The extent of equilibration between the spike and the particulate bound mercury compounds was studied temporally by monitoring the ²⁰⁰Hg:¹⁹⁹Hg isotope amount ratio and by determining the total amount of Hg in the liquid phase. For the NIST2710 complete equilibration was only achieved when concentrated HNO₃ in combination with a microwave digestion was employed, and good agreement between the found (31.7±4.0 μg g⁻¹, expanded uncertainty k=2) and certified (32.6±1.8 μg g⁻¹) values was obtained. For DORM-2 complete equilibration of methylmercury between the liquid and solid phases was achieved when using 50:50 H₂O:CH₃OH (v/v) and 0.01% 2-mercaptoethanol as the solvent. Even though only 50% of the analyte was extracted into the liquid phase, complete equilibration was achieved, hence, the found methylmercury mass fraction (4.25±0.47 μg g⁻¹, expanded uncertainty k=2) was in good agreement with the certified value (4.47±0.32 μg g⁻¹).     

电感耦合等离子体质谱技术最新进展

对1998年以来电感耦合等离子体质谱技术（ICP－MS）的最新进展作一简要回顾。内容包括同位素比值分析、双聚焦扇形磁场高分辨ICP－MS、多接收器磁扇形等离子体质谱仪（MC－ICP－MS）、飞行时间等离子体质谱仪（ICP－TOF－MS）、“冷”等离子体及屏蔽炬技术以及动态碰撞／反应池技术等进展。     

Detection and identification of thyreostats in the thyroid gland by gas chromatography-mass spectrometry

Because thyreostatic compounds, also named thyreostats, are banned in Europe (directive 86/469/EEC), methods have to be developed to prevent the illegal use of these substances. The analytical procedure described herein involves the detection and identification at the low ng g⁻¹ level of the main thyreostats known to be used for growth promotion by gas chromatography coupled to mass spectrometry (GC-MS). The assay is based on a liquid/liquid extraction of the thyroid gland, derivatization with pentafluorobenzyl bromide (PFBBr), purification on a silica solid phase extraction column and finally a trimethylsilylation prior to GC-MS. Good thyreostat recoveries were obtained (from 40% to 70%) as well as at acceptable repeatability. The target analytes were detectable below the 1 ng g⁻¹ level on a quadrupole mass spectrometer with negative chemical ionization (NCI) using ammonia as reagent gas and the selected ion monitoring (SIM) acquisition mode. This limit of detection was also reached in the SIM high resolution mode. An improved specificity (more diagnostic ions) was obtained under electronic impact (EI) conditions and positive chemical ionization (PCI) with methane as reagent gas. Identification of thyreostats according to the EU (European Union) criteria (93/256/EEC decision) was made on the basis of two independent GC-MS techniques; the limit of identification was close to 5 ng g⁻¹ for most thyreostats, which represents a real improvement for their control.     

Determination of calcium, iron and zinc in milk powder by reaction cell inductively coupled plasma mass spectrometry

An inductively coupled plasma mass spectrometer (ICP-MS) equipped with a dynamic reaction cell™ (DRC) was used for the determination of Ca, Fe and Zn in milk powder samples. The effect of the operating conditions of the DRC system was studied to get the best signal-to-noise (S/N) ratio. The potentially interfering ⁴⁰Ar⁺, ⁴⁰Ar¹⁶O⁺, ⁴⁰Ca¹⁶O⁺, ⁴⁸Ca¹⁶O⁺ and ³²S¹⁶O¹⁶O⁺ at the masses m/z 40, 56 and 64 were reduced in intensity significantly by using CH₄ as the reaction cell gas in the DRC while a q-value of 0.7 was used. The limits of detection for ⁴⁰Ca, ⁵⁶Fe and ⁶⁴Zn estimated from the external calibration graphs were 1, 0.01 and 0.001 ng ml⁻¹, respectively, which correspond to 1000, 10 and 1 ng g⁻¹ in the original powder sample. This method was applied to the determination of Ca, Fe and Zn in NIST SRM 1549 non-fat milk powder and two milk powder samples purchased locally. The results for the reference sample agreed satisfactorily with the reference values; the accuracy of the determination was better than 3.8, 18 and 2.2% for Ca, Fe and Zn, respectively. The results for which no reference value was available were also found to be in good agreement between different isotopes. Precision (R.S.D.) between sample replicates was better than 10% for all the determinations.     

Multi-elemental analysis of non-food packaging materials by inductively coupled plasma-time of flight-mass spectrometry

Commercial non-food packaging materials of four different matrices (paper, low density polyethylene (LDPE), polyethylene-polypropylene (PE-PP) and high density polyethylene (HDPE)) were examined for the content of Cr, Ni, Cu, Zn, As, Mo, Cd, Sb, Ba, Hg, Tl, Pb and U. The examined samples (0.17–0.35 g) were digested in HNO₃ and H₂O₂ (papers, LDPE and PE-PP) and in HNO₃, H₂SO₄ and H₂O₂ (HDPE) using microwave assisted high pressure system. The inductively coupled plasma-time of flight-mass spectrometry (ICP-TOFMS) has been employed as the detection technique. All measurements were carried out using internal standardization. Yttrium and rhodium (50 ng g⁻¹) were used as internal standards. The detection and quantification limits obtained were in the range of 0.005 ng g⁻¹ (⁵²Cr) to 0.51 ng g⁻¹ (⁶⁶Zn) and 0.015 μg g⁻¹ (⁵²Cr) to 2.02 μg g⁻¹ (⁶⁶Zn) of dry mass, respectively. The evaluated contents (mg kg⁻¹) of particular elements in the examined materials were as follows: 0.22–219; <1.05–9.03; 1.25–112; <2.02–449; <0.98–<1.30; <0.36–2.06; <0.29–113; <0.22–44.1; <0.06–57.4; <0.66–<0.88; <0.08–0.24; <0.13–1222 and <0.08–0.44 for Cr, Ni, Cu, Zn, As, Mo, Cd, Sb, Ba, Hg, Tl, Pb and U, respectively.     

Packing atomic metal cations with C60: Mass spectrometric observation of M(C60)n with M = Sr and Mo and n = 0–4

The atomic cations of Sr and Mo have been observed to add sequentially up to four molecules of C₆₀ in helium at 0.35 Torr and room temperature in the flow tube of a modified inductively coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. The available center-of-mass energy in collision-induced dissociation experiments of approximately 1.3 eV failed to remove C₆₀ from M⁺(C₆₀)₄. A structure is proposed for M⁺(C₆₀)₄ cations in which the bonding involves η⁶ interaction of the metal with the C₆₀ ligands and η²-to-η² interactions between the C₆₀ ligands.     

Analytical procedures for improved trace element detection limits in polar ice from Arctic Canada using ICP-SMS

Analytical procedures have been developed for the reliable determination of 19 trace elements (Ag, Al, Ba, Bi, Cd, Co, Cr, Cu, Fe, Mn, Pb, Rb, Sb, Sc, Sr, Tl, U, V, Zn) in ice samples at pg g⁻¹ and fg g⁻¹ concentrations using ICP-sector field mass spectrometry (ICP-SMS). Concentrations of most elements in the high purity water and doubly distilled HNO₃ employed were distinctly lower than previously reported values. The accuracy of the results was carefully evaluated using the certified water reference material SLRS-4. Contributions of unwanted trace elements due to acidification of the ice samples (0.5% HNO₃) to the total element budget amounted to only 0.001 pg g⁻¹ for Bi, 0.34 pg g⁻¹ for Cr, 0.2 pg g⁻¹ for Fe, 0.004 pg g⁻¹ for Pb, 0.00015 pg g⁻¹ for U and 0.0025 pg g⁻¹ for V: compared to the concentrations of the metals in ice these are negligible. The use of a detergent (0.05%) in the rinsing solution (0.5% HNO₃), helped to reduce memory effects by 59–98%, depending on the element considered; this resulted in shorter washing times between samples (i.e. 1 min) and improved analysis time. Adopting strict clean room procedures, the detection limit for Pb (0.06 pg g⁻¹) is a factor of ten lower than the current state-of-the-art. Compared to previous studies, the improved LODs obtained here for other trace elements amount to 2× (Ag), 4× (Sb), 5× (Ba), 6× (Cu, Mn, U), 9× (Bi), 13× (Cd), 18× (Fe) and 21× (V). The developed analytical protocols were successfully applied to the determination of selected trace elements in age-dated ice samples from the Canadian High Arctic. The toxic trace element Tl (median: 0.16 pg g⁻¹; range: 0.03–1.32 pg g⁻¹) and the lithogenic reference element Sc (0.53 pg g⁻¹; 0.06–2.9 pg g⁻¹) have been determined in a polar ice core for the first time.     

Accelerator mass spectrometry: ultra-sensitive analysis for global science

Accelerator mass spectrometry (AMS) is the analytical technique of choice for the detection of long-lived radionuclides that cannot be practically analysed with decay counting or conventional mass spectrometry. AMS has been used for the analysis of ¹⁴C, ¹⁰Be, ³⁶Cl and other cosmogenic radionuclides in archaeology, geology and environmental science. In addition, the ultrasensitivity of AMS is being applied in biomedicine to study the exposure of human tissues to chemicals and biomolecules at attomole levels. AMS is also being considered for the detection of anthropogenic radionuclides, such as ¹²⁹I and ²³⁶U, in environmental samples for the verification of the nuclear non-proliferation agreements. The state of the art of AMS is reviewed with examples from some recent applications.     

Thorium colloid analysis by single particle inductively coupled plasma-mass spectrometry

Thorium colloid analysis in water has been carried out by a single particle mode using inductively coupled plasma mass spectrometry (ICP-MS). The flash of ions due to the ionisation of a thorium colloidal particle in the plasma torch can be detected and measured in a time scan for ²³²Th⁺ or ²⁴⁸[ThO]⁺ according to the sensitivity required by the mass spectrometer. The peaks of the recorded intensity of the MS signal can be analysed as a function of the particle size or fraction of the studied element in the colloid phase. The frequency of the flashes is directly proportional to the concentration of particles in the colloidal suspension. After discussing Th colloid detection, on the basis of the intensity of the ion flashes generated in the plasma torch, tests were performed on thorium dioxide colloidal particles. This feasibility study also describes the experimental conditions and the limitation of the plasma design to detect thorium colloids in a single particle analysis mode down to about 10 fg.     

Interactions of thorium isotopes with colloidal organic matter in oceanic environments

The phase speciation of thorium and consequences for the residence times of colloids have been examined in seawater of the Middle Atlantic Bight (MAB) and the Gulf of Mexico. Two fractions of colloidal organic matter (COM), 0.2 μm > COM₁ > 1 kD and 0.2 μm > COM₁₀ > 10 kD, were sampled using cross-flow ultrafiltration techniques and measured for their ²³⁴Th activity and organic carbon concentration. The ratios of mass concentrations of COM₁ to those of suspended particulate matter were as high as 10 in the MAB and 6–34 in the Gulf of Mexico. Higher concentrations of colloids may be of great importance in the biogeochemical cycling of many particle-reactive nuclides or trace elements owing to their high specific surface area and complexation capacity. A significant fraction of ²³⁴Th in the traditionally defined “dissolved” pool was found to be associated with colloids. On average, about 10% of “dissolved” ²³⁴Th was in the colloidal fraction of sizes between 10 kDa and 0.2 μm, and 50% was in the 1 kDa-0.2 μm fraction. Values of the partition coefficients [K_c: (0.5−4) × 10⁶ ml g⁻¹ for K_c1 and (0.5−7) × 10⁶ ml g⁻¹ for K_c10] of ²³⁴Th between truly dissolved (<1 kDa) and colloidal fractions approximated those for Th-particle interactions [K_p: (0.3−10) × 10⁶ ml g⁻¹], indicating that colloid and suspended particle surface sites are similar. The distribution of ²³⁴Th between dissolved, colloidal, and particulate phases was broadly similar to that of organic carbon in these oceanic environments. Thus, thorium isotopes might be used as tracers of marine organic carbon cycling. Residence times of colloids derived from ²³⁴Th:²³⁸U disequilibria were consistently short, ranging from 1 to 14 days for COM₁₀ and from 5 to 65 days for COM₁, suggesting that marine colloids are highly reactive in marine biogeochemical processes. The discrepancy between apparent turnover times of colloids (1 kDa) derived from Th scavenging and ¹⁴C measurements suggest that ²³⁴Th and ¹⁴C may trace different geochemical pathways of colloids in the ocean.     

Simultaneous on-line preconcentration and determination of trace metals in environmental samples by flow injection combined with inductively coupled plasma mass spectrometry using a nanometer-sized alumina packed micro-column

A flow injection (FI) on-line preconcentration procedure by using a nanometer-sized alumina packed micro-column coupled to inductively coupled plasma mass spectrometry (ICP-MS) was described for simultaneous determination of trace metals (V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb) in the environmental samples. The effects of pH value, sample flow rate, preconcentration time, and interfering ions on the preconcentration of analytes have been investigated. Under the optimized operating conditions, the adsorption capacity of the nanometer-sized alumina for V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb were found to be 11.7, 13.6, 15.7, 9.5, 12.2, 13.3, 17.1, 17.7 and 17.5 mg g⁻¹, respectively. With 60 s preconcentration time and 60 s elution time, an enrichment factor of 5 and the sampling frequency of 15 h⁻¹ were obtained. The proposed method has been applied to the determination of trace metals in environmental certified reference materials and natural water samples with satisfactory results.     

Preconcentration and matrix separation of precious metals in geological and related materials using metalfix-chelamine resin prior to inductively coupled plasma mass spectrometry

A method for determining Au, Pt, Pd, Ir and Rh in ores and silicates and Fe-formation rocks is described. Sample decomposition was carried out with aqua regia and HF, followed by fusion of any insoluble residue with Na₂2O₂ in a glassycarbon crucible. The precious metals were separated, in 1.2 mol dm⁻³ HCl media, from the matrix elements by ion-exchange, using a mini-column with tetraethylenepentamine (metalfix-chelamine) resin. The resin was destroyed with HNO₃ and H₂O₂ in a high-pressure vessel assisted by microwave heating, and the precious elements were determined by flow-injection inductively coupled plasma mass spectrometry. The sample treatment, optimization of analytical variables and measurable concentration levels are discussed. The limits of quantification (10 sd_{n − 1}) calculated from a procedural blank sample solution were 4.0, 2.0, 1.5, 0.8 and 0.5 ng g⁻¹ for Au, Pt, Pd, Ir and Rh, respectively. The accuracy of the proposed method was tested by determining these elements in SARM 7 platinum-ore reference material. For all the analytes, the relative standard deviation of the combined dissolution, separation and determination methods was below 3.5% (n = 6).     

As, Cd, Cr, Ni and Pb pressurized liquid extraction with acetic acid from marine sediment and soil samples

Rapid leaching procedures by Pressurized Liquid Extraction (PLE) have been developed for As, Cd, Cr, Ni and Pb leaching from environmental matrices (marine sediment and soil samples). The Pressurized Liquid Extraction is completed after 16 min. The released elements by acetic acid Pressurized Liquid Extraction have been evaluated by inductively coupled plasma-optical emission spectrometry. The optimum multi-element leaching conditions when using 5.0 ml stainless steel extraction cells, were: acetic acid concentration 8.0 M, extraction temperature 100 °C, pressure 1500 psi, static time 5 min, flush solvent 60%, two extraction steps and 0.50 g of diatomaceous earth as dispersing agent (diatomaceous earth mass/sample mass ratio of 2). Results have showed that high acetic acid concentrations and high extraction temperatures increase the metal leaching efficiency. Limits of detection (between 0.12 and 0.5 μg g^− 1) and repeatability of the over-all procedure (around 6.0%) were assessed. Finally, accuracy was studied by analyzing PACS-2 (marine sediment), GBW-07409 (soil), IRANT-12-1-07 (cambisol soil) and IRANT-12-1-08 (luvisol soil) certified reference materials (CRMs). These certified reference materials offer certified concentrations ranges between 2.9 and 26.2 μg g^− 1 for As, from 0.068 to 2.85 μg g^− 1 for Cd, between 26.4 and 90.7 μg g^− 1 for Cr, from 9.3 to 40.0 μg g^− 1 for Ni and between 16.3 and 183.0 μg g^− 1 for Pb. Recoveries after analysis were between 95.7 and 105.1% for As, 96.2% for Cd, 95.2 and 100.6% for Cr, 95.7 and 103% for Ni and 94.2 and 105.5% for Pb.     

新一代电感耦合等离子体质谱（ICP-MS）全谱同时测定技术

介绍了最新推出的全谱同时检测的电感耦合等离子体质谱(ICP-MS)仪器,它是目前市场上唯一的从6Li到238U质量范围同时测量的ICP质谱仪,实现了从时序扫描测量到全谱同时测量的新飞跃.其革命性技术的核心是双聚焦扇形场质谱仪与全新的能够同时俘获全部离子的检测器及其创新设计的离子透镜系统,展现出优越的性能和更广阔的应用前...     

Rapid dissolution of metal in aqueous media using a modified commercial spark source unit

In this preliminary study the feasibility of a modified spark source was investigated as a method of rapidly dissolving solid conductive samples in aqueous media prior to analysis by atomic spectroscopy. The spark source, originally designed for spark emission spectroscopy in air, was modified by the installation of a spark ablation vessel. This spark ablation vessel was designed for spark ablating samples in aqueous solution, such as deionised water. Samples such as mild steel and brass were ablated in 5–10 ml of deionised water for 2–30 s producing a colloidal suspension. The suspension was readily dissolved by adding 100 μl of concentrated HCl or HNO₃. In this paper the spark ablation vessel is described as well as some of the properties of spark ablation in aqueous solutions. Spark ablation rates on mild steel were measured with respect to spark ablation parameters such as applied current (power), polarity and spark time. Using mild steel as a test sample, spark ablation rates varied from 40 μg s⁻¹, with 2.5 A of applied current, to 70 μg s⁻¹ with 10 A of applied current to the electrodes. The feasibility of using this technique for analysing trace levels (μg g⁻¹) of elements in solid samples was also demonstrated for elements such as Ni in brass with inductively coupled plasma mass spectrometry (ICP-MS). Quantification of selected elements (Cr, Ni, Mn and Cu) in a certified alloy (SRM 663) and a non-certified stainless steel showed good agreement between the measured values using spark ablation and the accepted values.     

Method development for the determination of manganese, cobalt and copper in green coffee comparing direct solid sampling electrothermal atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry

A method has been developed for the determination of cobalt, copper and manganese in green coffee using direct solid sampling electrothermal atomic absorption spectrometry (SS-ET AAS). The motivation for the study was that only a few elements might be suitable to determine the origin of green coffee so that the multi-element techniques usually applied for this purpose might not be necessary. The three elements have been chosen as test elements as they were found to be significant in previous investigations. A number of botanical certified reference materials (CRM) and pre-analyzed samples of green coffee have been used for method validation, and inductively coupled plasma optical emission spectrometry (ICP OES) after microwave-assisted acid digestion of the samples as reference method. Calibration against aqueous standards could be used for the determination of Mn and Co by SS-ET AAS, but calibration against solid CRM was necessary for the determination of Cu. No significant difference was found between the results obtained with the proposed method and certified or independently determined values. The limits of detection for Mn, Cu and Co were 0.012, 0.006 and 0.004 μg g⁻¹ using SS-ET AAS and 0.015, 0.13 and 0.10 μg g⁻¹ using ICP OES. Seven samples of Brazilian green coffee have been analyzed, and there was no significant difference between the values obtained with SS-ET AAS and ICP OES for Mn and Cu. ICP OES could not be used as a reference method for Co, as essentially all values were below the limit of quantification of this technique.     

Determination of polybrominated diphenyl ethers in human milk samples in the Czech Republic: Comparative study of negative chemical ionisation mass spectrometry and time-of-flight high-resolution mass spectrometry

In the Czech Republic no study on the levels of brominated flame retardants in human milk has been conducted, yet. In the first step analytical method for determination of PBDEs in this bioindicator matrix was implemented. Liquid–liquid extraction (LLE) (hexane, diethyl ether), followed by gel permeation chromatography was employed for isolation of PBDEs. Identification and quantification of PBDEs was carried out by GC–MS operated in negative chemical ionisation (NCI). Two mass spectrometric technologies, one employing quadrupole and the other one high resolution (HR) time-of-flight (TOF) analyzer, etc. were used in our study. Detection limits (LODs) obtained by quadrupole analyzer ranged from 0.02 to 0.05 ng g⁻¹ lipid weight, using high resolution time-of-flight analyzer LODs were significantly lower, ranging from 0.002–0.005 ng g⁻¹ lipid weight, what enabled detection of minor PBDE congeners.

Within this pilot study 103 breast milk samples, obtained from mothers living in Olomouc region, were examined. Ten PBDE congeners were determined. All samples examined till now contained PBDEs residues, the dominating contaminant representing this group was congener BDE 47. In most of analysed samples levels of this compound ranged from 0.2 to 2 ng g⁻¹ of lipid weight. Three exceptionally contaminated samples, containing levels of PBDEs 5–10 times higher than other samples, were found.     

Collision of molecular anions of benzenedicarboxylic esters with oxygen in a triple quadrupole mass spectrometer

A series of symmetrical phthalate, isophthalate, and terephthalate ester molecular anions were reacted with oxygen in the collision cell of a triple quadrupole mass spectrometer to produce characteristic [M − R]⁻ fragments that can be used to identify these compounds. The [M − R]⁻/M^−· intensity ratios decreased for homologous esters in the following order: phthalates > isophthalates terephthalates. Based on the [M − R]⁻ ion intensities for different alkyl substituents, on ¹⁸O₂ labeling experiments, and on the reactivity of bis(t-butylcyclohexyl)phthalates, it was concluded that M − R anions are generated through an S_N2 nucleophilic displacement at the alpha carbon of the saturated alkyl substituent. For the phenyl ester, the reaction proceeds through attack at the carbonyl carbon.