Assay of urinary 8‐hydroxy‐2′‐deoxyguanosine by capillary electrophoresis with spectrophotometric detection using a high‐sensitivity detection cell and solid‐phase extraction

A sensitive capillary electrophoretic method featuring spectrophotometric detection using a commercial Z‐cell was devised for the assay of 8‐hydroxy‐2′‐deoxyguanosine (8OHdG) in human urine. Solid‐phase extraction (SPE) based on hydrophilic‐lipophilic‐balanced RP sorbent was utilized for urine sample pretreatment and analyte preconcentration. The separation was carried out in conventional fused‐silica capillaries employing a Z‐cell with hydrodynamic sample injection (at 50 mbar for 12 s). The BGE (pH* 9.2, adjusted with 1 M NaOH) contained 0.15 M boric acid and 10% v/v ACN. The detection wavelength was 282 nm. The calibration curve for 8OHdG (measured in spiked urine) was linear in the range 10–1000 ng/mL; R² = 0.9993. The LOD was 3 ng/mL (11 nmol/L) of 8OHdG. Determination of the 8OHdG urinary levels was possible even in healthy individuals.     

An air‐assisted flow‐gating interface for capillary electrophoresis

A new kind of flow gating interface (FGI) has been designed for online connection of CE with flow‐through analytical techniques. The sample is injected into the separation capillary from a space from which the BGE was forced out by compressed air. A drop of sample solution with a volume of 75 nL is formed between the outlet of the delivery capillary supplying the solution from the flow‐through apparatus and the entrance to the CE capillary; the sample is hydrodynamically injected into the CE capillary from this drop. The sample is not mixed with the surrounding BGE solution during injection. The functioning of the proposed FGI is fully automated and the individual steps of the injection process are controlled by a computer. The injection sequence lasts several seconds and thus permits performance of rapid sequential analyses of the collected sample. FGI was tested for the separation of equimolar 50 μM mixture of the inorganic cations K⁺, Ba²⁺, Na⁺, Mg²⁺, and Li⁺ in 50 mM acetic acid/20 mM Tris (pH 4.5) as BGE. The obtained RSD values for the migration times varied in the range 0.7–1.0% and the values for the peak area were 0.7–1.4%; RSD were determined for ten repeated measurements.     

Study of aldehyde oxidase by micellar electrokinetic chromatography separation of O6‐benzylguanine and 8‐oxo‐O6‐benzylguanine

A separation method for O⁶‐benzylguanine (O⁶‐BG) and 8‐oxo‐O⁶‐benzylguanine (8‐oxo‐O⁶‐BG) is developed by using MEKC. This study includes the optimization of separation and incubation parameters for both off‐line and on‐line procedures. The BGE consisted of 25 mM sodium phosphate buffer‐methanol (70:30, v/v), apparent pH 7.4, in which SDS and methyl‐β‐cyclodextrin were dissolved yielding final concentrations of 50 and 15 mM, respectively. Separations were performed at 15 kV using an untreated fused‐silica capillary (40 cm length, effective length is 30 cm) with the detection wavelength at 195 nm. The capillary was kept at 15°C. Good performances were demonstrated for the repeatability and linearity. The LOQ was determined to be 14 μM for 8‐oxo‐O⁶‐BG (S/N = 10). The accuracy values showed a bias of +7.9% for 50 μM and –7.0% for 100 μM. Premix and transverse diffusion of laminar flow profiles (TDLFP) methods were used for on‐line mixing and reaction of the substrate O⁶‐BG with aldehyde oxidase. Both procedures were successful in mixing as well as subsequent separation of the substrate and the metabolite, while the repeatability of TDLFP (14.7% (n = 3)) was much better than the premix technique.     

High Electric Field Strengths in Micellar Electrokinetic Capillary Electrophoresis with Ionic Liquids as Modifiers

Abstract

In this study, a method for the separation and determination of basic analytes in aqueous capillary electrophoresis (CE) was developed based on high electric field strengths and ionic liquids (ILs). The resulting electric field strengths ranged from 500 to 1000 V/cm. Trishydroxymethylaminomethane (Tris) and sodium cholate (SC) were used as main electrolytes. The ionic liquids 1‐ethyl‐3‐methylimidazoium tetrafluoroborate (1E‐3MI‐TFB) and 1‐butyl‐3‐methylimidazoium tetrafluoroborate (1B‐3MI‐TFB) were used as modifiers to improve the separation efficiency and selectivity. It was shown that increasing the applied electric field strengths not only caused short analysis time, but also did not induce excessive Joule heating in the capillary when ionic liquids were used as modifiers. The susceptibility to high electric field of separation efficiency in capillary electrophoresis, with the effect of ionic liquids, was subsequently discussed, and the developed method was used to analyze three model analytes in Sinacalia tangutica. The accurate results illustrated that high electric field strength with the ionic liquids was feasible in CE.     

Estimation of apparent binding constant of complexes of selected acyclic nucleoside phosphonates with β‐cyclodextrin by affinity capillary electrophoresis

Affinity capillary electrophoresis (ACE) has been applied to estimation of apparent binding constant of complexes of (R,S)‐enantiomers of selected acyclic nucleoside phosphonates (ANPs) with chiral selector β‐cyclodextrin (βCD) in aqueous alkaline medium. The noncovalent interactions of five pairs of (R,S)‐enantiomers of ANPs‐based antiviral drugs and their derivatives with βCD were investigated in the background electrolyte (BGE) composed of 35 or 50 mM sodium tetraborate, pH 10.0, and containing variable concentration (0–25 mM) of βCD. The apparent binding constants of the complexes of (R,S)‐enantiomers of ANPs with βCD were estimated from the dependence of effective electrophoretic mobilities of (R,S)‐enantiomers of ANPs (measured simultaneously by ACE at constant reference temperature 25°C inside the capillary) on the concentration of βCD in the BGE using different nonlinear and linear calculation methodologies. Nonlinear regression analysis provided more precise and accurate values of the binding constants and a higher correlation coefficient as compared to the regression analysis of the three linearized plots of the effective mobility dependence on βCD concentration in the BGE. The complexes of (R,S)‐enantiomers of ANPs with βCD have been found to be relatively weak – their apparent binding constants determined by the nonlinear regression analysis were in the range 13.3–46.4 L/mol whereas the values from the linearized plots spanned the interval 12.3–55.2 L/mol.     

Analysis of short‐chain aliphatic amines in food and water samples using a near infrared cyanine 1‐(ε‐succinimydyl‐hexanoate)‐1′‐methyl‐3,3,3′,3′‐tetramethyl‐indocarbocyanine‐5,5′‐disulfonate potassium with CE–LIF detection

Precolumn derivatization of six short‐chain aliphatic amines by a near‐infrared dye, 1‐(ε‐succinimydyl‐hexanoate)‐1′‐methyl‐3,3,3′,3′‐tetramethyl‐indocarbocyanine‐5,5′‐ disulfonate potassium (MeCy5‐OSu), followed by MEKC–CE–LIF detection has been developed as a method for the determination of aliphatic amines in environmental water and food. Optimum derivatization was operated nicely in pH 9.0 borate buffer at 20°C for 30 min. Well separated peaks were observed with a pH 9.5 BGE containing 10 mmol L^?1 phosphoric acid, 20 mmol L^?1 SDS, and 7% methanol buffered with 1.0 mol L^?1 NaOH. The separation procedure was rapidly achieved within 11 min and the matrix interferences could be effectively eliminated. A linear calibration graph was obtained for 5–200 nmol L^?1 analytes with a correlation coefficient in the range 0.9933–0.9995 for amines. This method was successfully utilized to determine aliphatic amines in lake, sewage water, and red wine with recoveries ranging from 96.4 to 105% and the RSDs ranging from 0.9 to 2.9%. Near‐infrared, LIF‐detector‐compatible MeCy5‐OSu was proved suitable for the accurate, sensitive, and rapid separation and determination of aliphatic amines in water and food samples.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

Nitrogen‐Rich Energetic Monoanionic Salts of 3,4‐Bis(1 H‐5‐tetrazolyl)furoxan

3,4‐Bis(1H‐5‐tetrazolyl)furoxan (H₂BTF, 2 ) and its monoanionic salts that contain nitrogen‐rich cations were readily synthesized and fully characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analyses. Hydrazinium ( 3 ) and 4‐amino‐1,2,4‐triazolium ( 7 ) salts crystallized in the monoclinic space group P2(1)/n and have calculated densities of 1.820 and 1.764 g cm^?3, respectively. The densities of the energetic salts range between 1.63 and 1.79 g cm^?3, as measured by a gas pycnometer. Detonation pressures and detonation velocities were calculated to be 23.1–32.5 GPa and 7740–8790 m s^?1, respectively.     

4‐Methoxyanilinium tetrafluoroborate–dibenzo‐18‐crown‐6 (1/1)

In the structure of the complex of dibenzo‐18‐crown‐6 [systematic name: 2,5,8,15,18,21‐hexaoxatricyclo[20.4.0.0^9,14]hexacosa‐1(26),9,11,13,22,24‐hexaene] with 4‐methoxyanilinium tetrafluoroborate, C₇H₁₀NO⁺·BF₄⁻·C₂₀H₂₄O₆, the protonated 4‐methoxyanilinium (MB‐NH₃⁺) cation forms a 1:1 supramolecular rotator–stator complex with the dibenzo‐18‐crown‐6 molecule via N—H...O hydrogen bonds. The MB‐NH₃⁺ group is attached from the convex side of the bowl‐shaped crown, in contrast with similar ammonium cations that nest in the curvature of the bowl. The cations are associated via C—H...π interactions, while the cations and anions are linked by weak C—H...F hydrogen bonds, forming cation–crown–anion chains parallel to [011].     

2‐(Dinitromethylene)‐1‐nitro‐1, 3‐diazacyclopentane‐Based Energetic Salts

Energetic salts that contain nitrogen‐rich cations and the 2‐(dinitromethyl)‐3‐nitro‐1, 3‐diazacyclopent‐1‐ene anion were synthesized in high yield by direct neutralization reactions. The resulting salts were fully characterized by multinuclear NMR spectroscopy (¹H and ¹³C), vibrational spectroscopy (IR), elemental analysis, density and differential scanning calorimetry (DSC), and elemental analysis. Additionally, the structures of the ammonium ( 1 ) and isopropylideneaminoguanidinium ( 9 ) 2‐(dinitromethyl)‐3‐nitro‐1, 3‐diazacyclopent‐l‐ene salts were confirmed by single‐crystal X‐ray diffraction. Solid‐state ¹⁵N NMR spectroscopy was used as an effective technique to further determine the structure of some of the products. The densities of the energetic salts paired with organic cations fell between 1.50 and 1.79 g · cm^–3 as measured by a gas pycnometer. Based on the measured densities and calculated heats of formation, detonation pressures and velocities were calculated using Explo 5.05 and found to to be 25.2–35.5 GPa and 7949–9004 m · s^–1, respectively, which make them competitive energetic materials.     

La3OCl[AsO3]2: Ein Lanthan‐Oxidchlorid‐Oxoarsenat(III) mit “lone‐pair”‐Kanalstruktur

La₃OCl[AsO₃]₂: A Lanthanum Oxide Chloride Oxoarsenate(III) with a “Lone‐Pair” Channel Structure La₃OCl[AsO₃]₂ was prepared by the solid‐state reaction between La₂O₃ and As₂O₃ using LaCl₃ and CsCl as fluxing agents in evacuated silica ampoules at 850 °C. The colourless crystals with pillar‐shaped habit crystallize tetragonally (a = 1299.96(9), c = 558.37(5) pm, c/a = 0.430) in the space group P4₂/mnm (no. 136) with four formula units per unit cell. The crystal structure contains two crystallographically different La³⁺ cations. (La1)³⁺ is coordinated by six oxygen atoms and two chloride anions in the shape of a bicapped trigonal prism (CN = 8), whereas (La2)³⁺ carries eight oxygen atoms and one Cl^? anion arranged in the shape of tricapped trigonal prism (CN = 9). The isolated pyramidal [AsO₃]^3? anions (d(As–O) = 175–179 pm) consist of three oxygen atoms (O2 and two O3), which surround the As³⁺ cations together with the free, non‐binding electron pair (lone pair) Ψ¹‐tetrahedrally (?(O–As–O) = 95°, 3×). One of the three crystallographically independent oxygen atoms (O1), however, is exclusively coordinated by four (La2)³⁺ cations in the shape of a real tetrahedron (d(O–La) = 236 pm, 4×). These [(O1)(La2)₄]¹⁰⁺ tetrahedra form endless chains in the direction of the c axis through trans‐edge condensation. Empty channels, constituted by the lone‐pair electrons of the Cl^? anions and the As³⁺ cations in the Ψ¹‐tetrahedral oxoarsenate(III) anions [AsO₃]^3?, run parallel to [001] as well.     

Construction of Two 3D Main Group Coordination Polymers Based on 2‐(2‐Pyridyl)‐4,5‐imidazole‐dicarboxylic Acid: Structures and Luminescent Properties

Two main group coordination polymers based on 2‐(2‐pyridyl)‐4,5‐imidazole‐dicarboxylic acid (H₃oPyIDC), namely [Ba(H₂oPyIDC)₂(H₂O)]_n ( 1 ) and [Pb₂(HoPyIDC)₂]_n ( 2 ) are obtained under hydrothermal conditions. In compound 1 , the Ba²⁺ cations and HoPyIDC^2– anions are connected to a 1D chain, and the 1D chains are further interconnected by Ba–O bonds, forming a 3D 3‐connected framework. In compound 2 , a 2D layer with (4,4) topology is formed by Pb^II ions and HoPyIDC^2– anions. The 2D layer are pillared by HoPyIDC^2–, yielding a 3D (3,4)‐connected framework. The thermogravimetric analyses and luminescence properties of compounds 1 and 2 are also investigated.     

A two‐dimensional mixed‐valence CuII/CuI coordination polymer constructed from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate

Coordination polymers are a thriving class of functional solid‐state materials and there have been noticeable efforts and progress toward designing periodic functional structures with desired geometrical attributes and chemical properties for targeted applications. Self‐assembly of metal ions and organic ligands is one of the most efficient and widely utilized methods for the construction of CPs under hydro(solvo)thermal conditions. 2‐(Pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate (HPIDC²⁻) has been proven to be an excellent multidentate ligand due to its multiple deprotonation and coordination modes. Crystals of poly[aquabis[μ₃‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ⁵N¹,O⁵:N³,O⁴:N²]copper(II)dicopper(I)], [Cu^IICu^I₂(C₁₀H₅N₃O₄)₂(H₂O)]_n, (I), were obtained from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PIDC) and copper(II) chloride under hydrothermal conditions. The asymmetric unit consists of one independent Cu^II ion, two Cu^I ions, two HPIDC²⁻ ligands and one coordinated water molecule. The Cu^II centre displays a square‐pyramidal geometry (CuN₂O₃), with two N,O‐chelating HPIDC²⁻ ligands occupying the basal plane in a trans geometry and one O atom from a coordinated water molecule in the axial position. The Cu^I atoms adopt three‐coordinated Y‐shaped coordinations. In each [CuN₂O] unit, deprotonated HPIDC²⁻ acts as an N,O‐chelating ligand, and a symmetry‐equivalent HPIDC²⁻ ligand acts as an N‐atom donor via the pyridine group. The HPIDC²⁻ ligands in the polymer serve as T‐shaped 3‐connectors and adopt a μ₃‐κ²N,O:κ²N′,O′:κN′′‐coordination mode, linking one Cu^II and two Cu^I cations. The Cu cations are arranged in one‐dimensional –Cu1–Cu2–Cu3– chains along the [001] direction. Further crosslinking of these chains by HPIDC²⁻ ligands along the b axis in a –Cu2–HPIDC²⁻–Cu3–HPIDC²⁻–Cu1– sequence results in a two‐dimensional polymer in the (100) plane. The resulting (2,3)‐connected net has a (12³)₂(12)₃ topology. Powder X‐ray diffraction confirmed the phase purity for (I), and susceptibilty measurements indicated a very weak ferromagnetic behaviour. A thermogravimetric analysis shows the loss of the apical aqua ligand before decomposition of the title compound.     

Poly(N,N‐dimethylacrylamide‐co‐4‐(ethyl)‐morpholine methacrylamide) copolymer as coating for CE

In this work, a new physically adsorbed coating for CE is presented. This coating is based on a poly(N,N‐dimethylacrylamide‐co‐4‐(ethyl)‐morpholine methacrylamide) (DMA/MAEM) copolymer synthesized in our laboratory. It is demonstrated that the direction and magnitude of the EOF in CE can be modulated by varying the composition of the DMA/MAEM copolymer and the type and pH of the BGE. Moreover, the DMA/MAEM coating provides %RSD_n = 5 values for migration times lower than 0.9% for the same capillary and day, whereas the %RSD_n = 25 obtained for the interday assay was lower than 2.9%. The stability of the coating procedure is also tested between capillaries obtaining %RSD_n = 15 values lower than 2.9%, demonstrating that this physically adsorbed copolymer gives rise to a stable and reproducible coating in CE. Finally, the usefulness of this new cationic copolymer as CE coating is demonstrated through different applications. Namely, it is demonstrated that the CE separation of basic proteins, nucleotides and organic acids is achieved in a fast and easy way by using the DMA/MAEM coated capillary. The use of fused bare silica capillaries did not allow the separation of these compounds under the same analytical conditions. These results demonstrate that this type of coating in CE provides the option of using BGEs that are useless when utilized together with bare silica capillaries making wider the application and possibilities of this analytical technique.     

Hydrogen‐bonded sheets in 2‐(2‐aminophenyl)‐1H‐benzimidazol‐3‐ium dihydrogen phosphate

The title salt, C₁₃H₁₂N₃⁺·H₂PO₄⁻, contains a nonplanar 2‐(2‐aminophenyl)‐1H‐benzimidazol‐3‐ium cation and two different dihydrogen phosphate anions, both situated on twofold rotation axes in the space group C2. The anions are linked by O—H...O hydrogen bonds into chains of R₂²(8) rings. The anion chains are linked by the cations, via hydrogen‐bonding complementarities and electrostatic interactions, giving rise to a sheet structure with alternating rows of organic cations and inorganic anions. Comparison of this structure with that of the pure amine reveals that the two compounds generate characteristically different sheet structures. The anion–anion chain serves as a template for the assembly of the cations, suggesting a possible application in the design of solid‐state materials.     

N‐methyl‐2‐pyrrolidonium methyl sulfonate acidic ionic liquid as a new dynamic coating for separation of basic proteins by capillary electrophoresis

A simple and economical CE method has been developed for the analysis of four model basic proteins by employing N‐methyl‐2‐pyrrolidonium methyl sulfonate ionic liquid (IL) as the dynamic coating material based on the interaction of both between electrostatic attraction and hydrogen bond, and between the organic cations of IL and the inner surface of bare fused‐silica capillary. The N‐methyl‐2‐pyrrolidonium‐based IL modified capillary not only generated a stable suppressed electroosmotic flow, but also effectively eliminated the wall adsorption of proteins. Several important parameters such as the IL concentration, pH values, and concentrations of the background electrolyte were optimized to improve the separation of basic proteins. Consequently, under the optimum separation conditions, a satisfied separation of basic proteins including lysozyme, cytochrome c, ribonuclease A, and α‐chymotrypsinogen A with theoretical plates ranging from 2.09 × 10⁵ to 4.48 × 10⁵ plates/m had been accomplished within 15 min. The proposed method first illustrated the effect of hydrogen bond between coating material and inner capillary surface on the coating, which should be a new strategy to design and select more effective coating materials to form more stable coatings in CE.     

Combined use of l‐alanine tert butyl ester lactate and trimethyl‐β‐cyclodextrin for the enantiomeric separations of 2‐arylpropionic acids nonsteroidal anti‐inflammatory drugs

In this study, a new CE method, employing a binary system of trimethyl‐β‐CD (TM‐β‐CD) and a chiral amino acid ester‐based ionic liquid (AAIL), was developed for the chiral separation of seven 2‐arylpropionic acid nonsteroidal anti‐inflammatory drugs (NSAIDs). In particular, the enantioseparation of ibuprofen, ketoprofen, carprofen, indoprofen, flurbiprofen, naproxen, and fenoprofen was improved significantly by supporting the BGE with the chiral AAIL l ‐alanine tert butyl ester lactate (l ‐AlaC₄Lac). Parameters, such as concentrations of TM‐β‐CD and l ‐AlaC₄Lac, and buffer pH, were systematically examined in order to optimize the chiral separation of each NSAID. It was observed that the addition of the AAIL into the BGE improved both resolution and efficiency significantly. After optimization of separation conditions, baseline separation (R_s>1.5) of five of the analytes was achieved in less than 11 min, while the resolution of ibuprofen and flurbiprofen was approximately 1.2. The optimized enantioseparation conditions for all analytes involve a BGE of 5 mM sodium acetate/acetic acid (pH 5.0), an applied voltage of 30 kV, and a temperature of 20°C. In addition, the results obtained by computing the %‐RSD values of the EOF and the two enantiomer peaks, demonstrated excellent run‐to‐run, batch‐to‐batch, and day‐to‐day reproducibilities.     

Co‐electroosmotic capillary electrophoresis of basic proteins with 1‐alkyl‐3‐methylimidazolium tetrafluoroborate ionic liquids as non‐covalent coating agents of the fused‐silica capillary and additives of the electrolyte solution

The paper reports the results of a study carried out to evaluate the use of three 1‐alkyl‐3‐methylimidazolium‐based ionic liquids as non‐covalent coating agents for bare fused‐silica capillaries and additives of the electrolyte solutions (BGE) for CE of basic proteins in the co‐EOF separation mode. The three ionic liquids are differentiated from each other by the length of the alkyl group on the imidazolium cation, consisting of either an ethyl, butyl or octyl substituent, whereas tetrafluoroborate is the common anionic component of the ionic liquids. Coating the capillary with the ionic liquid resulted in improved peak shape and protein separation, while the EOF was maintained cathodic. This indicates that each ionic liquid is effective at masking the protein interaction sites on the inner surface of the capillary, also when its adsorption onto the capillary wall has not completely neutralized all the negative charges arising from the ionization of the silanol groups and the ionic liquid is not incorporated into the BGE employed for separation. Using the coated capillaries with BGE containing the ionic liquid employed for the coating, at concentration low enough to maintaining the EOF cathodic, both peak shape and protein separation varied to different extents, based on the particular ionic liquid used and its concentration. Fast and efficient separation of the model basic protein mixture in co‐electroosmotic CE is obtained with the 1‐butyl‐3‐methylimidazolium tetrafluoroborate coated capillary and 100 mM acetate buffer (pH 4.0) containing 4.4 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as the BGE.     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

CE‐ESI‐MS coupled with dynamic pH junction online concentration for analysis of peptides in human urine samples

In this article, an approach has been developed for the analysis of some small peptides with similar pI values by CE‐ESI‐MS based on the online concentration strategy of dynamic pH junction. The factors affected on the separation, detection and online enrichment, such as BGE, injection pressure, sheath flow liquid and separation voltage have been investigated in detail. Under the optimum conditions, i.e. using 0.5 mol/L formic acid (pH 2.15) as the BGE, preparing the sample in 50 mM ammonium acetate solution (pH 7.5), 50 mbar of injection pressure for 300 s, using 7.5 mM of acetic acid in methanol–water (80% v/v) solution as the sheath flow liquid and 20 kV as the separation voltage, four peptides with similar pI values, such as L ‐Ala‐L ‐Ala (pI=5.57), L ‐Leu‐D ‐Leu (pI=5.52), Gly‐D ‐Phe (pI=5.52) and Gly‐Gly‐L ‐Leu (pI=5.52) achieved baseline separation within 18.3 min with detection limits in the range of 0.2–2.0 nmol/L. RSDs of peak migration time and peak area were in the range of 1.45–3.57 and 4.93–6.32%, respectively. This method has been applied to the analysis of the four peptides in the spiked urine sample with satisfactory results.