Analyzing powers of the continuum spectra: 65 MeV polarized protons on 12C, 28Si, 45Sc, 58Ni, 93Nb, 165Ho, 166Er and 209Bi

Analyzing powers of the continuum spectra were measured for 65 MeV protons from ¹²C, ²⁸Si, ⁴⁵Sc, ⁵⁸Ni, ⁹³Nb, ¹⁶⁵Ho, ¹⁶⁶Er, ${}^{209}\text{Bi}\text{(}\text{p}\text{,}\text{p\#}\text{prime;}\text{X}\text{)}$ and ($\text{p}$, dX) reactions and from ⁹³Nb, ²⁰⁹Bi($\text{p}$, αX) reactions. The analyzing powers of the continuum spectra were found to be small at forward angles where the pre-equilibrium process is important. However they do not show a systematic tendency. This feature indicates the importance of the spin-dependent interaction as well as nuclear structure effects. On the other hand, the analyzing powers were very large and positive at backward angles where the shape of the energy spectra resembles that of an evaporation spectrum. The maximum values of the analyzing power in the backward hemisphere depend on the target mass for the A < 45 mass region and they are as large as 15%, 20% and 35% for ${}^{93}\text{Nb}\text{(}\text{p}\text{,}\text{p}\text{′}\text{X}\text{)}$, ($\text{p}$, dX), ($\text{p}$, αX) reactions at E_X = 20 MeV, respectively. These large values are mainly due to the entrance channel effect. There is no appreciable even-odd mass effect on the analyzing power for medium-mass nuclei. These features were unexpected from the conventional pre-equilibrium reaction models.     

Blue-emitting long-lasting phosphor, Sr3Al10SiO20:Eu,Ho

A novel blue-emitting long-lasting phosphor Sr₃Al₁₀SiO₂₀:Eu²⁺,Ho³⁺ is prepared by the conventional high-temperature solid-state technique and their luminescent properties are investigated. XRD, photoluminescence (PL) and thermoluminescence (TL) are used to characterize the synthesized phosphors. These phosphors are well crystallized by calcinations at 1500-1600 °C for 3 h. The phosphor emits blue light and shows long-lasting phosphorescence after it is excited with 254/365 nm ultraviolet light. TL curves reveal the introduction of Ho³⁺ ions into the Sr₃Al₁₀SiO₂₀:Eu²⁺ host produces a highly dense trap level at appropriate depth, which is the origin of the long-lasting phosphorescence in this kind of material. The long-lasting phosphorescence lasts for nearly 6 h in the light perception of the dark-adapted human eye (0.32 mcd/m²). All the results indicate that this phosphor has promising potential practical applications.     

New FIR laser lines from optically pumped C2H3F, C2H3Cl, C2H3Br, C2H3CN, C2H5F, CH2CF2, HCOOH and CH3Br

Twenty-seven new cw far infrared laser lines with wavelengths between 137 and 988m have been observed from optically pumping C₂H₃F, C₂H₃Cl, C₂H₃Br, C₂H₅F, C₂H₃CN, CH₂CF₂, HCOOH and CH₃Br with a CO₂ laser. The wavelengths of these FIR laser lines were determined together with their optimum pressures and relative intensities.     

Li+ ion conducting γ solid solutions in the systems Li4XO4-Li3YO4: X=Si,Ge, Ti; Y=P,As, V; Li4XO4-LiZO2: Z=Al,Ga, Cr and Li4GeO4-Li2CaGeO4

A wide variety of solid solutions with a structure related to that of γ Li₃PO₄ may be prepared. These include materials such as lisicon, Li_2+2xZn_1-xGeO₄ and the title systems, many of which have not been studied previously. Conductivity data are presented for eight systems: Li₄GeO₄-Li₃(P, As, V)O₄; Li₄TiO₄-Li₃(As, V)O₄; Li₄GeO₄-Li(Ga, Al)O₂; Li₄GeO₄-Li₂CaGeO₄ and the results compared with those reported in the literature for Li₄SiO₄-Li₃(P, As, V)O₄ systems and lisicon. dc polarisation measurements were made on four of the system and it was found that the electronic transference number is 10^?4 or less. The materials with the highest conductivity were found in the systems, Li₄ (Ge, Ti) O₄-Li₃ (As, V)O₄ with σ ~ (3 to 4) × 10^?5 Ω^?1 cm^?1 at room temperature. It is noted that the systems with the highest conductivity are generally those with the largest unit cell volume.     

Electron spectroscopy using excited atoms and photons IX. Penning ionization of CO2, CS2, COS,N2O,H2S,SO2, and NO2

The electron spectra resulting from thermal collisions of He* (predominantly 2³S) metastable atoms with the seven triatomic molecules, CO₂, COS, CS², N₂O H₂S, SO₂ and NO₂, are compared with their respective 584-Å photoelectron spectra using a transmission-corrected electron spectrometer. The normalised relative electronic-state transition probabilities for production of ionic states in Penning ionization and photoionization are reported together with energy shifts (ΔE values) for He*(2³S) Penning ionization. The cross-section for Penning ionization to lower states of NO₂⁺ is extremely low as has been observed in other open shell molecules such as NO and O₂.     

Dynamics and crystal chemistry of tellurites: 1. Raman spectra of thallium tellurites: Tl2TeO3, Tl2Te2O5 and Tl2Te3O7

Raman spectra of the three entitled crystals are analysed within the framework of a lattice-dynamical model treatment using preliminary obtained X-ray diffraction data. The short range atomic arrangement and spectrochemical peculiarities of these structures are jointly discussed, which is considered as an initial step for studying the nature of the glass phases in the xTl₂O+(1−x)TeO₂ system. The charged TeO₃²⁻ groups and the neutral TeO₂ quasi-molecules are proposed as the basic units forming the complex tellurite anions. However, no relevant characteristic frequencies can be indicated in the spectra since the interatomic separation in those units are highly variables and their vibrational states are mixed and delocalised.     

Energy transfer in Y3Al5O12:Ce, Pr and CaMoO4:Sm, Eu phosphors

Non-radiative energy transfers (ET) from Ce³⁺ to Pr³⁺ in Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and from Sm³⁺ to Eu³⁺ in CaMoO₄:Sm³⁺, Eu³⁺ are studied based on photoluminescence spectroscopy and fluorescence decay patterns. The result indicates an electric dipole-dipole interaction that governs ET in the LED phosphors. For Ce³⁺ concentration of 0.01 in YAG:Ce³⁺, Pr³⁺, the rate constant and critical distance are evaluated to be 4.5×10⁻³⁶ cm⁶ s⁻¹ and 0.81 nm, respectively. An increase in the red emission line of Pr³⁺ relative to the yellow emission band of Ce³⁺, on increasing Ce³⁺ concentration is observed. This behavior is attributed to the increase of spectral overlap integrals between Ce³⁺ emission and Pr³⁺ excitation due to the fact that the yellow band shifts to the red spectral side with increasing Ce³⁺ concentration. In CaMoO₄:Sm³⁺, Eu³⁺, Sm³⁺-Eu³⁺ transfer occurs from ⁴G_5/2 of Sm³⁺ to ⁵D₀ of Eu³⁺. The rate constant of 8.5×10⁻⁴⁰ cm⁶ s⁻¹ and the critical transfer distance of 0.89 nm are evaluated.     

The ν2, 2ν2, 3ν2, ν4, and ν2 + ν4 bands of 15NH3

The ir absorption of gaseous ¹⁵NH₃ between 510 and 3040 cm^?1 was recorded with a resolution of 0.06 cm^?1. The ν₂, 2ν₂, 3ν₂, ν₄, and ν₂ + ν₄ bands were measured and analyzed on the basis of the vibration-rotation Hamiltonian developed by V. ?pirko, J. M. R. Stone, and D. Papou?ek (J. Mol. Spectrosc.60, 159–178 (1976)). A set of effective molecular parameters for the ν₂ = 1, 2, 3 states was derived, which reproduced the transition frequencies within the accuracy of the experimental measurements. For ν₄ and ν₂ + ν₄ bands the standard deviation of the calculated spectrum is about four times larger than the measurements accuracy: a similar result was found for ν₄ in ¹⁴NH₃ by ?. Urban et al. (J. Mol. Spectrosc.79, 455–495 (1980)). This result suggests that the present treatment takes into account only the most significant part of the rovibration interaction in the doubly degenerate vibrational states of ammonia.     

Cation ordering and crystal structures in AGa2X4 compounds (CoGa2S4, CdGa2S4, CdGa2Se4, HgGa2Se4, HgGa2Te4)

Single crystals of some AGa₂X₄ compounds (CoGa₂S₄, CdGa₂S₄, CdGa₂Se₄, HgGa₂Se₄, HgGa₂Te₄) were prepared by chemical vapour deposition and flux method.The X-ray structural investigations indicated blende or defect chalcopyrite structures.A simple relationship is suggested between the c/a ratio and the cationic sublattice ordering.     

MAO-synthesized Al2O3-supported V2O5 nano-porous catalysts: Growth, characterization, and photoactivity

V₂O₅-loaded Al₂O₃ layers were successfully grown via micro-arc oxidation (MAO) process for the first time. Surface morphology and topography of the layers were investigated by scanning electron microscope (SEM) and atomic force microscope (AFM). It was found that the composite layers had a porous structure with a rough surface which is suitable for catalytic applications. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectroscopy (EDS) techniques were also employed to study phase structure and chemical composition of the composite layers. The layers consisted of γ-alumina, α-alumina, and vanadium pentoxide phases in which their relative contents varied with the applied voltage. Meanwhile, optical properties of the composite layers were investigated using UV-vis spectrophotometry technique, and the band gap energy was calculated as 3.15 eV. Furthermore, photocatalytic performance of the synthesized composite layers was determined by measuring the decomposition rate of methylene blue solution, as a model compound, on the surface of the layers under ultra violet photo-irradiation. It was found that more than 91% of the methylene blue was degraded after 120 min with a rate constant of k = 0.0192 min⁻¹.     

Superconductivity in Nb.95Ta.05Se3

We have measured the resistivity of NbSe₃ doped with 5% Ta from room temperature down to 0.5K and compared our results with similar measurements on pure NbSe₃. The pure sample remains normal to the lowest temperature (0.5K), whereas the doped sample has a sharp transition to the superconducting state with T_c = 1.5 ± 0.2 K. Measurements of the critical magnetic field indicate that the Ta doped samples are homogeneous, anisotropic three dimensional superconductors.     

Corrosion behavior of Nd9.4Pr0.6Febal.Co6B6Ga0.5TixCx (x=0, 1.5, 3, 6) nanocomposites annealed melt-spun ribbons

The effect of Ti and C additions on the corrosion behavior of Nd_9.4Pr_0.6Fe_bal.Co₆B₆Ga_0.5Ti_xC_x (x=0, 1.5, 3, 6) isotropic nanocomposite melt-spun ribbons in 3.5 wt% sodium chloride solution was studied. The melt-spun ribbons were annealed at 750 °C for 10 min in argon-filled quartz capsules. The microstructure of multiphase nanocrystalline samples and corrosion products was characterized using the X-ray diffraction and electron microscopy techniques. The electrochemical behavior was assessed using potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the addition of Ti and C increases the corrosion resistance of NdFeB ribbons; the best corrosion resistance was obtained for 1.5 wt% Ti and C content.     

The infrared spectra of 12C32S, 12C34S, 13C32S,and 12C33S

Using a tunable diode laser spectrometer, the infrared absorption spectra of four isotopic species of carbon monosulfide have been observed in the positive column of a dc discharge of CS₂ and Ar. The wavenumbers of 115 vibration-rotation transitions between 1180.5 and 1266.1 cm^?1 have been measured. These lines were assigned to the 1-0, 2-1, 3-2, and 4-3 bands of ¹²C³²S, the 1-0 and 2-1 bands of ¹²C³⁴S and ¹³C³²S, and the 1-0 band of ¹²C³³S. These new data have been combined with the previous infrared and microwave results to determine Dunham coefficients (Y_ij), the Dunham potential expansion constants (a₀,a₁,a₂,a₃, and a₄), and the classical turning points by the RKR method.     

The pentad rotation-vibrational states of 12CD4: Wavenumber analysis of infrared and Raman spectra of the ν1, ν3, 2ν2, ν2 + ν4, and 2ν4 bands

The so-called pentad of ¹²CD₄ consists of the vibrational states v₁ = 1(symmetry A₁), v₃ = 1(F₂), v₂ = 2(A₁ + E), v₂ = v₄ = 1(F₁ + F₂), and v₄ = 2(A₁ + E + F₂). All states are located in the 1950 to 2250-cm^?1 region and all are strongly interacting. In the present work we have assigned more than 5000 infrared rotation-vibrational transitions and 163 isotropic Raman transitions from the vibrational ground state to the pentad. We have used infrared and Raman spectra of a resolution better than 0.01 cm^?1. From the experimental wavenumbers 2567 pentad rotation-vibrational energy levels with J ≦ 20 have been determined. These levels are reported in the paper. The levels have been used for refinements of the spectroscopic constants of two physically different effective Hamiltonians for the pentad states. For all levels with J ≦ 12 an unweighted standard deviation of 0.004 cm^?1 is obtained for both Hamiltonians, whereas the standard deviation increases more or less rapidly with J above 12 due to the imperfections of the Hamiltonians. The values of the spectroscopic constants of both Hamiltonians (85 and 106, respectively) are reported and the effects of the approximations are discussed.     

Absolute Raman intensities of CH4, CH3D,CH2D2, CHD3, and CD4

Measurements of the absolute vibrational Raman intensities and depolarization ratios for the fundamental and some overtone and combination bands of CH₄, CH₃D, CH₂D₂, CHD₃, and CD₄ are reported. Experimental aspects of these measurements are discussed. The experimental data conform satisfactorily to all isotope intensity sum rules. The measured intensities and depolarization ratios, together with the vibrational potential function for CH₄, make possible the calculation of the four independent parameters of the isotopic invariant quantities $\text{α}{}^{\mathrm{S}}\text{= |}\text{?α}\text{?S}\text{|}$. The results deduced from these agree with all 36 experimentally observed values. Values of electro-optical parameters for the CH bond are calculated and discussed.     

Carbon-13 Isotopic Species of H2C3, H2C4, and H2C5: High-Resolution Rotational Spectra

The microwave rotational spectra of the carbon-13 isotopic species of H₂C₃, H₂C₄, and H₂C₅ have been observed in a pulsed supersonic molecular beam by Fourier transform microwave spectroscopy. At high resolution all of the rotational lines exhibit hyperfine structure produced by the magnetic interaction between the nuclear spin of ¹³C and the overall rotation of the molecule. The component of the nuclear spin-rotation tensor along the a-inertial axis is large for most isotopic species, especially at the carbene carbon; at this position C_aa is two to three times larger than at other substituted positions along the chain. In contrast to both H₂C₃ and H₂C₃, in H₂C₄C_aa exhibits a pronounced alternation along the carbon chain backbone. Following detection of the five carbon-13 isotopic species and D₂C₅, an experimental structure (r₀) has been determined to high accuracy for H₂C₅.     

Esca studies of Ga,As, GaAs,Ga2O3, As2O3 and As2O5

The binding energies of Ga 3d, As 3d, Ga L₃M₄,₅M₄,₅ and O 1s in Ga, As, GaAs, Ga₂O₃, As₂O₃ and As₂O₅ are reevaluated by means of ESCA. The calibration lines of the C 1s and the Au 4f_{$\text{7}\text{2}$} gave different binding energies for the compound materials. In order to determine the absolute binding energies, the chemical shifts in Auger and photoelectron lines from a layered structure composed of thin layer oxide and substrate of a defined material were used. An energy calibration curve, E(Ga 3d) vs. ΔE(GA LMM - Ga 3d), was found to be useful for determination of binding energies in the material which contains gallium. In the case of the GaAs sample, both the chemical etching and the ion bombardment effects on the chemical structure of the GaAs surface are also discussed.     

Simultaneous analysis of the ν1, ν4, 2ν2, ν2 + ν5, and 2ν5 infrared bands of 12CH3F

The Fourier-transform spectrum of CH₃F from 2800 to 3100 cm^?1, obtained by Guelachvili in Orsay at a resolution of about 0.003 cm^?1, was analyzed. The effective Hamiltonian used contained all symmetry allowed interactions up to second order in the Amat-Nielsen classification, together with selected third-order terms, amongst the set of nine vibrational basis functions represented by the states ν₁(A₁), ν₄(E), 2ν₂(A₁), ν₂ + ν₅(E), 2ν₅⁰(A₁), and 2ν₅^±2(E). A number of strong Fermi and Coriolis resonances are involved. The vibrational Hamiltonian matrix was not factorized beyond the requirements of symmetry. A total of 59 molecular parameters were refined in a simultaneous least-squares analysis to over 1500 upper-state energy levels for J ≤ 20 with a standard deviation of 0.013 cm^?1. Although the standard deviation remains an order of magnitude greater than the precision of the measurements, this work breaks new ground in the simultaneous analysis of interacting symmetric top vibrational levels, in terms of the number of interacting vibrational states and the number of parameters in the Hamiltonian.     

Incommensurate modulations in Ba2TiSi2O8, Sr2TiSi2O8, and Ba2TiGe2O8

Incommensurate modulations in Ba₂TiSi₂O₈, Sr₂TiSi₂O₈, and Ba₂TiGe₂O₈ are compared based on their corresponding electron diffraction patterns. The dependence of the modulations on chemical composition provides a suitable model system for the investigation of incommensurations in framework structures using high-resolution transmission electron microscopy (HRTEM). A widening of quantitative HRTEM utilising the concept of rigid units is proposed allowing for a determination of atomistic displacements responsible for the formation of incommensurately modulated structures.     

Relation between electrooptical constants and polar tensors of CH3F,CD3F,CH3Cl,CD3Cl,CH3Br,CD3Br,CD3I,and CD3I

Infrared intensity analysis was done in two ways. In one approach, formulas connecting electrooptical parameters (eop's) and intensities were derived and, using the intensities, the former were obtained. In evaluating the eop's the intensity sum equations were used directly so that the sign ambiguity of $\text{δP}\text{δQ}$ is avoided. In the other method, polar tensors were obtained directly from intensities. The two methods have now been connected, and polar tensors have been obtained in terms of electrooptical parameters so that the former were also free from sign ambiguity of $\text{δP}\text{δQ}$. They compare well with those obtained directly from intensities. In similar connecting formulas by other authors [see, for example, P. L. Prasad, J. Chem. Phys., 69, 4403, (1978)], both polar tensors and eop's were affected by the sign ambiguity.