A Particulate Biochromatographic Support for the Research of Arginase Inhibitors Doped with Nanomaterials: Differences Observed Between Carbon and Boron Nitride Nanotubes. Application to Three Plant Extracts

The arginase enzyme was bound to porous silica using a reactive polymer where two types of nanomaterials were entrapped, i.e., carbon nanotubes (CNTs) and boron nitride nanotubes (BNNTs). For the first time, it was shown that BNNTs were highly efficient for increasing the performance of a particulate bioactive support. Also, we demonstrated that BNNTs enhanced more strongly this effect in comparison with CNTs. In addition, with this novel bioactive support, the relative IC50 values of the well-known arginase inhibitors were found to be in agreement with those derived by the conventional spectrometric method. It was shown the ethylacetate extract of the roots of Spirotropis longifolia (SL) and of the ethanol extract of sunflower (Helianthus annuus) seed (SS) and Lonicera japonica Thunb, i.e., honeysuckle (H) on the arginase activity inhibited the enzyme activity.

     

Immobilization of Acetylcholinesterase onto Carbon Nanotubes Utilizing Streptavidin-biotin Interaction for the Construction of Amperometric Biosensors for Pesticides

Abstract

Carbon nanotubes (CNTs) are very promising materials onto which bioactive molecules can be immobilized in the construction of biosensors. Streptavidin was used as a molecular linker to immobilize biotinylated acetylcholinesterase (AChE) on CNTs in a gentle and controllable fashion for pesticide biosensors. Glassy carbon electrodes coated with the CNT-enzyme complex had high affinity for the substrate acetylthiocholine and produced strong peak oxidation currents in electrochemical assays. We also propose a new method, i.e., the use of relative net slope rather than the percentage of inhibition, in the calculation of pesticide concentrations. The biosensors could detect low levels of the pesticide methyl paraoxon.     

Peculiarities of a novel bioenzymatic reactor using carbon nanotubes as enzyme activity enhancers: application to arginase

Multiwalled carbon nanotubes have been entrapped in a porous monolithic chromatographic support. This support was used for the covalent immobilization of the arginase enzyme a novel target in hypertension. The effect of the nanotube (NT) amount into the monolith was analyzed. The obtained results demonstrated the ability of carbon nanotubes to increase significantly the performance of this novel bioactive support.     

Electrochemical production, characterization, and application of MWCNTs

The subject of this study is production of carbon nanotubes (CNTs) using an original procedure of reduction of lithium molten salts onto graphite cathode; their structural characterization and application as support material for electrocatalysts aimed for hydrogen evolution. As-produced CNTs were characterized by means of scanning and transmission electron microscopy (SEM and TEM), Raman spectroscopy, and thermogravimetric and differential thermal analysis (DTA). SEM and TEM images have shown that nanotubes are mostly of curved shape with length of 1–20 μm and diameter of 20–40 nm. Raman peaks indicate that the crystallinity of produced nanotubes is rather low. The obtained results suggest that formed product contains up to 80 % multiwalled carbon nanotubes (MWCNTs), while the rest being non-reacted graphite and fullerenes. DTA curves show that combustion process of the nanotubes takes place in two stages, i.e., at 450 and 720 °C. At the lower temperature, combustion of MWCNTs occurs, while at higher one, fullerenes and non-reacted graphite particles burn. As-produced MWCNTs were used as electrocatalyst’s support materials and their performance was compared with that of traditional carbon support material Vulcan XC-72. MWNTs have shown almost twice higher real surface area, and electrocatalyst deposited on them showed better catalytic activity than corresponding one deposited on Vulcan XC-72.     

Oxygen adsorption characteristics on hybrid carbon and boron‐nitride nanotubes

In this work, first‐principles density functional theory (DFT) is used to predict oxygen adsorption on two types of hybrid carbon and boron‐nitride nanotubes (CBNNTs), zigzag (8,0), and armchair (6,6). Although the chemisorption of O₂ on CBNNT(6,6) is calculated to be a thermodynamically unfavorable process, the binding of O₂ on CBNNT(8,0) is found to be an exothermic process and can form both chemisorbed and physisorbed complexes. The CBNNT(8,0) has very different O₂ adsorption properties compared with pristine carbon nanotubes (CNTs) and boron‐nitride nanotube (BNNTs). For example, O₂ chemisorption is significantly enhanced on CBNNTs, and O₂ physisorption complexes also show stronger binding, as compared to pristine CNTs or BNNTs. Furthermore, it is found that the O₂ adsorption is able to increase the conductivity of CBNNTs. Overall, these properties suggest that the CBNNT hybrid nanotubes may be useful as a gas sensor or as a catalyst for the oxygen reduction reaction. © 2014 Wiley Periodicals, Inc.     

Thermal degradation kinetics of PET/SWCNTs nanocomposites prepared by the in situ polymerization

The decomposition and thermal behavior of poly(ethylene terephthalate) (PET)/carbon nanotubes (CNTs) nanocomposites were studied using thermogravimetric (TG) analysis in air atmosphere. A series of PET/single-walled CNTs (SWCNTs) materials of varying nanoparticles concentration were prepared using the in situ polymerization technique. Transmission electron microscopy and scanning electron microscopy micrographs verified that the dispersion of the SWCNTs in the PET matrix was homogeneous, while some relatively small aggregates co-existed at higher filler concentration. Two-stage decomposition was observed in the experiments. During first stage, strong chemical bonds are broken, i.e., aliphatic bonds and benzyl ring containing molecules decompose into small molecules in the gaseous phase. During second stage, when temperature is higher, the remaining nanotubes along with the residues of the first stage are burned. Kissinger and Coats–Redfern (5, 10, 20, 50 K min^?1) methods were applied to TG data to obtain kinetic parameters (activation energy, Arrhenius constant at 600 K and A factor) and Criado method to kinetics model analysis. In this kinetic model, energy activation is increasing with the increase of nanotubes concentration.     

中分子毒素在碳纳米管上的吸附

研究了两种不同形态的碳纳米管(随机生长多壁碳纳米管(MWCNTs)及定向生长多壁碳纳米管(ACNTs))对典型中分子毒素的吸附性能. 并与两种现有商用血液灌流吸附材料(活性炭(AC)及大孔吸附树脂(MR))进行了对比. 结果显示, 碳纳米管(CNTs)具有优异的中分子吸附能力, 其中MWCNTs对典型中分子毒素的吸附量可达47.18 mg·g-1, 为活性炭的10.8倍, 为大孔吸附树脂的5.5倍. 此外, 碳纳米管的吸附非常迅速, 中分子毒素在MWCNTs及ACNTs达到吸附平衡的时间仅为10 min和15 min, 而活性炭及大孔吸附树脂则分别需要60 min及120 min. 碳纳米管优异的吸附性能得益于其独特的微观结构所形成的发达的中孔. 因此, 碳纳米管可望成为高效的吸附材料, 应用于血液灌流中.     

A first principles study of NO2 chemisorption on silicon carbide nanotubes

Using methods based on first principles, we find that an NO₂ molecules can be chemisorbed on silicon carbide nanotubes (SiCNTs) with an appreciable binding energy (∼−1.0 eV), and that this is not the case for either carbon nanotubes (CNTs) or boron nitride nanotubes (BNNTs). A detailed analysis of the energetics, geometry, and electronic structure of various isomers of the complexes was performed. The SiCNT–NO₂ complex can be metallic or nonmetallic depending on the type of adsorption site and the chirality of the tube. However, our analysis of the electronic structure predicts that a strong p-type effect of the adsorption turns semiconducting systems into metallic ones at room temperature, irrespective of the chirality of the tube.     

Carbon nanotubes decorated α-Al2O3 containing cobalt nanoparticles for Fischer-Tropsch reaction

A new hierarchical composite consisted of multi-walled carbon nanotubes (CNTs) layer anchored on macroscopic α-Al₂O₃ host matrix was synthesized and used as support for Fischer-Tropsch synthesis (FTS). The composite constituted by a thin shell of a homogeneous, highly entangled and structure-opened carbon nanotubes network and it exhibited a relatively high and fully accessible specific surface area of 76 m²·g^?1, compared with that of 5 m²·g^?1 of the original α-Al₂O₃ support. The metal-support interaction between carbon nanotubes surface and cobalt precursor and high effective surface area led to a relatively high dispersion of cobalt nanoparticles. This hierarchically supported cobalt catalyst exhibited a high FTS activity along with an extremely high selectivity towards liquid hydrocarbons compared with the cobalt-based catalyst supported on pristine α-Al2O₃ or on CNTs carriers. This improvement can attribute to the high accessibility of composite surface area comparing with the macroscopic host structure alone or to the bulk CNTs where the nanoscopic dimension induced a dense packing with low mass transfer which favoured the problem of reactants competitive diffusion towards the cobalt active site. In addition, intrinsic thermal conductivity of decorated CNTs could help the heat dissipating throughout the catalyst body, thus avoiding the formation of local hot spots which appeared in high CO conversion under pure syngas feed in FTS reaction. Cobalt supported on CNTs decorated α-Al₂O₃ catalyst also exhibited satisfied high stability during more than 200 h on stream under relatively severe conditions compared with other catalysts reported in the literature. Finally, the macroscopic shape of such composite easily rendered its usage as catalyst support in a fixed-bed configuration without facing problems of transport and pressure drop as encountered with the bulk CNTs.     

Surface initiated ring-opening polymerization of l-proline N-carboxy anhydride from single and multi walled carbon nanotubes

Ring-opening surface initiated polymerization of l-proline N-carboxyanhydride was performed from amine functionalized single (SWNTs) and multi walled carbon nanotubes (MWNTs). The primary amines were grafted on the surfaces via a well-studied Diels–Alder cycloaddition. The initiator attachment helped the debundling of carbon nanotubes as shown by atomic force microscopy (AFM) studies where only small aggregates were observed. Thermogravimetric analysis revealed high wt% of grafted polyproline on the carbon nanotubes surface after the ring-opening polymerization. AFM studies showed a rather uniform layer of grafted polyproline from both MWNTs and SWNTs. The grafting of PLP on the surface was also verified by FTIR and Raman spectroscopy as well as ¹H NMR in CDCl₃/d-TFA. The polyproline grafted carbon nanotubes (CNTs) were readily dissolved in organic solvents in contrast to the insoluble pristine and amine-functionalized CNTs.     

Surface functionalization of oxidized multi-walled carbon nanotubes: Candida rugosa lipase immobilization

This work examines two approaches for immobilization of lipase from Candida rugosa on oxidized multi-walled carbon nanotubes (o-MWCNTs). One method included the presence of activating agents to promote covalent bonding and the other the adsorption on o-MWCNTs to elucidate if non-specific bonding on the o-MWCNTs surface exists. The influence of the immobilization time and initial enzyme concentration on protein loading and the expressed lypolitic activity of the immobilized preparation were investigated. The results showed that the enzyme adsorbs on o-MWCNTs in a maximal amount of 37 μg mg⁻¹ CNTs, while the attached amount was more than 2-times higher under covalent promoting conditions (80 μg mg⁻¹ CNTs). Furthermore, similar trends were observed for the lypolitic activity, whereby preparations obtained under covalent promoting conditions had almost 3-times higher activity (560 IU g⁻¹ of immobilized enzyme). In addition, immobilization of the enzyme was confirmed by Fourier transformation infrared spectroscopy and thermogravimetric analysis.     

A co-precipitation and annealing route to the large-quantity synthesis of boron nitride nanotubes

A novel co-precipitation and annealing route to the large-quantity synthesis of boron nitride nanotubes (BNNTs), using amorphous boron powder, iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O) and urea (CO(NH₂)₂) as the raw materials, was demonstrated. An intermediate Fe(OH)₃·B was firstly prepared through a co-precipitation process and then annealed in flowing ammonia atmosphere at 1200 °C. It was found that the heat treatment at 800 °C during the annealing process could favor the growth of BNNTs. The BNNTs had an average diameter of 70 nm and possessed bamboo and quasi-cylindrical structures. The annealing temperature greatly affected the formation of BNNTs. Only BN particles could be obtained at lower temperature (e.g. 1100 °C), whereas thorn-like nanosheet-decorated BNNTs were fabricated at higher temperature (e.g. 1300 °C). A combination mechanism of solid–liquid–solid (SLS) and vapor–liquid–solid (VLS) model was suggested to be responsible for the growth of BNNTs.     

LC-MS/MS based metabolite profiling and lipase enzyme inhibitory activity of Kaempferia angustifolia Rosc. with different extracting solvents

Kaempferia angustifolia also known as kunci pepet in Indonesia, has been widely used as a traditional medicine to treat cold, cough, stomachache, diarrhea, fever, and dysentery, also used as a slimming agent. The level of biological activity depends on the composition and concentration of bioactive compounds present in the plants. In addition, extraction solvents affects the composition and concentration of bioactive compounds. Therefore, this study aimed at identifying the metabolite profile of K. angustifolia and to evaluate the inhibitory potential of their various solvent extracts towards lipase enzyme. Extracts were prepared using water and different concentration of ethanol (30–99%) and then analyzed their metabolite profile using LC-MS/MS. Lipase inhibitory activity was assessed using in vitro enzymatic inhibition assay. In this study, profile of K. angustifolia was shown to be rich in terpenoids (monoterpenoids, sesquiterpenoids, diterpenoids), and phenolics (carboxylic acid and phenolic acid). Most of the identified compounds were detected in ethanol extract of K. angustifolia. The ethanol extract at 100 μg/mL displayed 59.82% inhibitory activity towards lipase and was found to have the highest inhibitory activity compared to the other extracts. A partial least square-discriminant analysis (PLS-DA) was performed for clustering the extracts based on the peak area of 53 putatively identified compounds. Based on the result obtained, 50% ethanol extract is the best extract that gives the highest inhibition results and 15 metabolites were identified, mainly from the carboxylic acid and terpenoid groups.     

Thermal behavior of carbon nanotubes decorated with gold nanoparticles

Three different forms of carbon, i.e., multi-walled carbon nanotubes (CNTs), single-walled CNTs, and soot, were decorated with gold nanoparticles by a new method. In this method C₁₀H₈ ⁻ ions transfer electrons to the CNTs or soot. These electrons on the carbon surface can then reduce Au³⁺ species to form supported Au nanoparticles with a narrow particle size distribution. Thermogravimetric/differential thermal analyses (TG/DTA), XRD, Raman, and TEM show that naphthalene molecules remain trapped inside the Au nanoparticles and can only be removed by treatment at ca. 300 °C. Remarkable effect of the Au nanoparticles on the oxidation of carbon by O₂ is also observed by TG/DTA, i.e., on-set oxidation temperature and activation energy (E _a). It is shown that as the Au particle size decreases from 25 to 2 nm a linear decrease of the oxidation temperature is observed. Au particles larger than 25 nm do not produce any significant effect on carbon oxidation. These results are discussed in terms of spillover catalytic effect where Au nanoparticles activate O₂ molecules to produce active oxygen species which oxidize the different carbon supports.     

Phytochemical Profiling,In Vitro Biological Activities,and In Silico Molecular Docking Studies of Dracaena reflexa

Dracaena reflexa, a traditionally significant medicinal plant, has not been extensively explored before for its phytochemical and biological potential. The present study was conducted to evaluate the bioactive phytochemicals and in vitro biological activities of D. reflexa, and perform in silico molecular docking validation of D. reflexa. The bioactive phytochemicals were assessed by preliminary phytochemical testing, total bioactive contents, and GC-MS analysis. For biological evaluation, the antioxidant (DPPH, ABTS, CUPRAC, and ABTS), antibacterial, thrombolytic, and enzyme inhibition (tyrosinase and cholinesterase enzymes) potential were determined. The highest level of total phenolic contents (92.72 ± 0.79 mg GAE/g extract) was found in the n-butanol fraction while the maximum total flavonoid content (110 ± 0.83 mg QE/g extract) was observed in methanolic extract. The results showed that n-butanol fraction exhibited very significant tyrosinase inhibition activity (73.46 ± 0.80) and acetylcholinesterase inhibition activity (64.06 ± 2.65%) as compared to other fractions and comparable to the standard compounds (kojic acid and galantamine). The methanolic extract was considered to have moderate butyrylcholinesterase inhibition activity (50.97 ± 063) as compared to the standard compound galantamine (53.671 ± 0.97%). The GC-MS analysis of the n-hexane fraction resulted in the tentative identification of 120 bioactive phytochemicals. Furthermore, the major compounds as identified by GC-MS were analyzed using in silico molecular docking studies to determine the binding affinity between the ligands and the enzymes (tyrosinase, acetylcholinesterase, and butyrylcholinesterase enzymes). The results of this study suggest that Dracaena reflexa has unquestionable pharmaceutical importance and it should be further explored for the isolation of secondary metabolites that can be employed for the treatment of different diseases.     

Single-Step Partial Purification of Intracellular <Emphasis Type="Italic">β</Emphasis>-Galactosidase from <Emphasis Type="Italic">Kluyveromyces lactis</Emphasis> Using Microemulsion Droplets

Partial purification of β-galactosidase from the crude extract of Kluyveromyces lactis was carried out using water-in-isooctane microemulsions formed by the anionic surfactant, sodium di-ethylhexyl sulfosuccinate (Aerosol OT). In order to obtain the crude extract, yeast cells of K. lactis were disrupted by a cell disrupter and separated. The purification of β-galactosidase from the extract by a recently developed one-step reversed micellar (i.e., microemulsion-based) extraction method was then tested, by measuring total protein mass and enzyme activity in the product stream and by analyzing its composition using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and gel filtration chromatography. Effects of salt concentration, protein concentration, and pH on the extraction were investigated. Using this approach, a 5.4-fold purification of β-galactosidase was achieved with 96 % total activity recovery, using a feed containing crude extract and 50 mM K-phosphate buffer (pH 7.5) and 50 mM KCl. Gel filtration chromatography showed that the single extraction was successful at removing low molecular weight impurity proteins (molecular weight (MW)?<?42 kDa) from the crude extract.     

Electrochemical Pretreatment of Amino‐Carbon Nanotubes on Graphene Support as a Novel Platform for Bilirubin Oxidase with Improved Bioelectrocatalytic Activity towards Oxygen Reduction

The electrochemical conditioning of amino‐carbon nanotubes (CNTs) on a graphene support in an alkaline solution is used to produce ?NHOH as hydrophilic functional groups for the efficient immobilization of bilirubin oxidase enzyme. The application of the immobilized enzyme for the direct electrocatalytic reduction of O₂ is investigated. The onset potential of 0.81 V versus NHE and peak current density of 2.3 mA cm^?2 for rotating modified electrode at 1250 rpm, indicate improved biocatalytic activity of the proposed system for O₂ reduction.     

One-pot, high-yield synthesis of titanate nanotube bundles decorated by Pd (Au) clusters for stable electrooxidation of methanol

Titanate nanotube bundles assembled by several simple nanotubes were synthesized through a simple reaction between TiO₂ crystallites and highly concentrated NaOH in the presence of Au or Pd sols. Due to the unique scrolling growth mechanism of titanate nanotubes (TNTs), Au or Pd clusters were encapsulated in situ by TNTs, and titanate/Au and titanate/Pd nanotube bundles were formed. In comparison with carbon nanotubes (CNTs) or active carbon that was widely used as carriers to support metal clusters, TNTs bundles can immobilize the metal clusters tightly and overcome the shortcoming of exfoliation of metal clusters from the carriers. The as-prepared titanate/metal hybrids possess mesoporosity and high surface area. The electrochemical oxidation of methanol demonstrates that titanate/Pd hybrids exhibit high electrocatalytic activity and excellent stability, and hence they should be ideal catalyst candidates in direct methanol fuel cells (DMFCs).     

Microstructure control of MnO2/CNT hybrids under in-situ hydrothermal conditions

In this work, single-crystalline MnO₂ nanoparticles were directly grown on the surface of multi-walled carbon nanotubes (CNTs) homogeneously under in-situ hydrothermal conditions, during which the CNTs were well dispersed in aqueous solution with the aid of dodecyl benzene sulphonic acid sodium (SDBS). This stable suspension ensures the continuous deposition of the MnO₂ nanocrystals. It was found that the MnO₂/CNTs nanocomposites formed in the presence of CNTs, but the MnO₂ nanowires formed without CNTs under the same hydrothermal conditions. Moreover, the as-synthesized MnO₂/CNTs sample showed a high specific capacity and cycling stability, which was ascribed to its highly-homogeneous hybrid nanostructure. This homogeneous MnO₂/CNTs nanocomposite is shown to be able to take full advantages of both the high capacity of MnO₂ and the high electron conductivity of CNTs by integrating them homogeneously. This homogeneous hybrid nanostructure is a promising electrode material for energy storage/conversion devices with excellent performances.     

Chemisorption of NH3 at the open ends of boron nitride nanotubes: a DFT study

Considering the thermodynamic aspects and reaction pathways of chemical adsorption of NH₃ molecule at the open ends of boron nitride nanotubes (BNNTs), theoretically, it was found that the open-ended BNNTs are able to cleave the N–H bond of NH₃ via a one- or two-stepwise mechanism. The N-enriched and B-enriched open-ended BNNTs show a nucleophilic and electrophilic behavior toward the NH₃, respectively. Besides, some effects of this chemical adsorption on the electronic properties of BNNTs were explored.