Synthesis of Deuterium Labeled (±)‐2,5‐Dimethoxyamphetamine (DMA), (±)‐4‐Bromo‐2,5‐Dimethoxyamphetamine (DOB), and (±)‐4‐Methoxyamphetamine (PMA) as Internal Standards for Quantitative Analyses by GC‐MS

DMA, DOB and PMA are increasingly abused central nervous system stimulants with neurotoxic properties. In recent years, many controlled substance analogs (designer drugs) with a large variety of structures have reached the illegal market, making their identification difficult. Therefore, this work studies the synthesis of DOB‐d₆, DMA‐d₆ and PMA‐d₃ as internal standards for use in gas chromatography‐mass spectrometry (GC‐MS) to identify controlled substances.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Electrochemical Reduction of 4,4′‐(2,2,2‐Trichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDT) and 4,4′‐(2,2‐Dichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDD) at Carbon Cathodes in Dimethylformamide

In dimethylformamide containing tetramethylammonium tetrafluoroborate, cyclic voltammograms for reduction of 4,4′‐(2,2,2‐trichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDT) at a glassy carbon cathode exhibit five waves, whereas three waves are observed for the reduction of 4,4′‐(2,2‐dichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDD). Bulk electrolyses of DDT and DDD afford 4,4′‐(ethene‐1,1‐diyl)bis(chlorobenzene) (DDNU) as principal product (67–94%), together with 4,4′‐(2‐chloroethene‐1,1‐diyl)bis(chlorobenzene) (DDMU), 1‐chloro‐4‐styrylbenzene, and traces of both 1,1‐diphenylethane and 4,4′‐(ethane‐1,1‐diyl)bis(chlorobenzene) (DDO). For electrolyses of DDT and DDD, the coulometric n values are essentially 4 and 2, respectively. When DDT is reduced in the presence of a large excess of D₂O, the resulting DDNU and DDMU are almost fully deuterated, indicating that reductive cleavage of the carbon–chlorine bonds of DDT is a two‐electron process that involves carbanion intermediates. A mechanistic scheme is proposed to account for the formation of the various products.     

Zinc(II) and Cadmium(II) Complexes of the 3‐(2‐Pyridyl)‐5,6‐diphenyl‐1,2,4‐triazine (PDPT) Ligand,Structural Studies of [Zn(PDPT)2Cl(ClO4)] and [Cd(PDPT)2(NO3)(ClO4)]

Two new mixed‐anion zinc(II) and cadmium(II) complexes of 3‐(2‐pyridyl)‐5,6‐diphenyl‐1,2,4‐triazine (PDPT) ligand, [Zn(PDPT)₂Cl(ClO₄)] and [Cd(PDPT)₂(NO₃)(ClO₄)], have been synthesized and characterized by elemental analysis, IR‐ and ¹H NMR spectroscopy. The single crystal X‐ray analyses show that the coordination number in these complexes is six with four N‐donor atoms from two “PDPT” ligand and two of the anionic ligands, ZnN₄ClO_perchlorate, CdN₄O_nitrateO_perchlorate. Self‐assembly of these compounds in the solid state via π–π‐stacking interactions is discussed.     

Synthesen und Strukturen von Bis(4,4′‐t‐butyl‐2,2′‐bipyridin)‐Ruthenium(II)‐Komplexen mit funktionellen Derivaten des Tetramethyl‐bibenzimidazols

Syntheses and Structures of Bis(4,4′‐t‐butyl‐2,2′‐bipyridine) Ruthenium(II) Complexes with functional Derivatives of Tetramethyl‐bibenzimidazole [(tbbpy)₂RuCl₂] reacts with dinitro‐tetramethylbibenzimidazole ( A ) in DMF to form the complex [(tbbpy)₂Ru( A )](PF₆)₂ ( 1a ) (tbbpy: bis(4,4′‐t‐butyl)‐2,2′bipyridine). Exchange of the two PF₆^? anions by a mixture of tetrafluor‐terephthalat/tetrafluor‐terephthalic acid results in the formation of 1b in which an extended hydrogen‐bonded network is formed. According to the ¹H NMR spectra and X‐ray analyses of both 1a and 1b , the two nitro groups of the bibenzimidazole ligand are situated at the periphery of the complex in cis position to each other. Reduction of the nitro groups in 1a with SnCl₂/HCl results in the corresponding diamino complex 2 which is a useful starting product for further functionalization reactions. Substitution of the two amino groups in 2 by bromide or iodide via Sandmeyer reaction results in the crystalline complexes [(tbbpy)₂Ru( C )](PF₆)₂ and [(tbbpy)₂Ru( D )](PF₆)₂ ( C : dibromo‐tetrabibenzimidazole, D : diiodo‐tetrabibenzimidazole). Furthermore, 2 readily reacts with 4‐t‐butyl‐salicylaldehyde or pyridine‐2‐carbaldehyde under formation of the corresponding Schiff base Ru^II complexes 5 and 6 . ¹H NMR spectra show that the substituents (NH₂, Br, I, azomethines) in 2 ‐ 6 are also situated in peripheral positions, cis to each other. The solid state structure of both 2 , and 3 , determined by X‐ray analyses confirm this structure. In addition, the X‐ray diffraction analyses of single crystals of the complexes [(tri‐t‐butyl‐terpy)(Cl)Ru( A )] ( 7 ) and [( A )PtCl₂] ( 8 ) display also that the nitro groups in these complexes are in a cis‐arrangement.     

Copper(II)‐Catalyzed Synthesis of N‐Substituted‐3‐amino‐4‐cyano‐isoquinoline‐1(2H)‐ones by the Reaction of N‐Substituted‐2‐iodobenzamides with Malononitrile

A novel Cu(OAc)₂·H₂O catalyzed coupling reaction of N‐substituted‐2‐iodobenzamides with malononitrile to afford N‐substituted‐3‐amino‐4‐cyano‐isoquinoline‐1(2H)‐ones is described. The reaction proceeded in DMSO at 90°C for 5 h in nitrogen without external ligands.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Synthesis,Crystal Structures and Fluorescent Properties of Two 2,2′‐Biquinoline‐4,4′‐dicarboxylate‐based Cadmium(II) and Cobalt(II) Complexes

Two metal‐organic coordination polymers with one‐dimensional infinite chain motif, [Cd(bqdc)(phen)₂]_n ( 1 ) and [Co(bqdc)(phen)(H₂O)₂]_n ( 2 ) (H₂bqdc = 2,2′‐biquinoline‐4,4′‐dicarboxylic acid, phen = 1,10‐phenanthroline), have been synthesized under similar solv/hydrothermal conditions and fully structural characterized by elemental analysis, IR, and single‐crystal X‐ray crystallography. Their thermal stability and photoluminescence properties were further investigated by TG‐DTA and fluorescence spectra. In both complexes, the adjacent metal ions (Cd^II for 1 and Co^II for 2 ) are linked together by dicarboxylate groups of bqdc dianions in chelating bidentate and monodentate modes, respectively, generating a zigzag chain for 1 and linear chain for 2 . The relatively higher thermal stability up to 324 °C for 1 and strong fluorescence emissions jointly suggest that they are good candidates for luminescent materials.     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.     

1,1′‐Diethyl‐4,4′‐bipyridine‐1,1′‐diium bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide): multiple C—H...N hydrogen bonds form a complex sheet structure

In the title salt, C₁₄H₁₈N₂²⁺·2C₉H₅N₄O⁻, the 1,1′‐diethyl‐4,4′‐bipyridine‐1,1′‐diium dication lies across a centre of inversion in the space group P2₁/c. In the 1,1,3,3‐tetracyano‐2‐ethoxypropenide anion, the two independent –C(CN)₂ units are rotated, in conrotatory fashion, out of the plane of the central propenide unit, making dihedral angles with the central unit of 16.0 (2) and 23.0 (2)°. The ionic components are linked by C—H...N hydrogen bonds to form a complex sheet structure, within which each cation acts as a sixfold donor of hydrogen bonds and each anion acts as a threefold acceptor of hydrogen bonds.     

Synthesis and characterization of poly(L‐lactide‐co‐ε‐caprolactone) (B)‐poly(L‐lactide) (A) ABA block copolymers

ABA triblock copolymers of L ‐lactide (LL) and ε‐caprolactone (CL), designated as PLL‐P(LL‐co‐CL)‐PLL, were synthesized via a two‐step ring‐opening polymerization in bulk using diethylene glycol and stannous octoate as the initiating system. In the first‐step reaction, an approximately 50:50 mol% P(LL‐co‐CL) random copolymer (prepolymer) was prepared as the middle (B) block. This was then chain extended in the second‐step reaction by terminal block polymerization with more L ‐lactide. The percentage yields of the triblock copolymers were in excess of 95%. The prepolymers and triblock copolymers were characterized using a combination of dilute‐solution viscometry, gel permeation chromatography (GPC), ¹H‐ and ¹³C‐NMR, and differential scanning calorimetry (DSC). It was found that the molecular weight of the prepolymer was controlled primarily by the diethylene glycol concentration. All of the triblock copolymers had molecular weights higher than their respective prepolymers. ¹³C‐NMR analysis confirmed that the prepolymers contained at least some random character and that the triblock copolymers consisted of additional terminal PLL end (A) blocks. From their DSC curves, the triblock copolymers were seen to be semi‐crystalline in morphology. Their glass transition, solid‐state crystallization, and melting temperature ranges, together with their heats of melting, all increased as the PLL end (A) block length increased. Copyright © 2005 John Wiley & Sons, Ltd.     

Copper(II)‐Catalyzed Tandem Synthesis of Substituted 3‐Methyleneisoindolin‐1‐ones

An efficient strategy for the synthesis of a variety of 3‐methyleneisoindolin‐1‐ones has been developed. The reaction proceeded from coupling of 2‐iodobenzamides (or 2‐bromobenzamides) and terminal alkynes via Cu(OAc)₂·H₂O/2,2′‐biimidazole catalyzed in DMF at 60°C and subsequent additive cyclization produced substituted 3‐methyleneisoindolin‐1‐ones in good to excellent yields.     

Assembly of Three 2D Metal‐Organic Frameworks (MOFs) Derived from Flexible Ligands, 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene (3‐bpd) and/or 1,2‐bis(4‐pyridyl)ethane (dpe)

Three coordination polymers, {[Cd(3‐bpd)₂(NCS)₂]×C₂H₅OH}_n ( 1 ), {[Cd(3‐bpd)(dpe)(NO₃)₂]×(3‐bpd)}₂ ( 2 ), {[Cd(dpe)₂(NCS)₂]×3‐bpd×2H₂O}_n ( 3 ) (3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene; dpe = 1,2‐bis(4‐pyridyl)ethane), were prepared and structurally characterized by a single‐crystal X‐ray diffraction method. In compound 1 , each Cd(II) ion is six‐coordinate bonded to six nitrogen atoms from four 3‐bpd and two NCS^? ligands. The 3‐bpd acts as a bridging ligand connecting the Cd(II) ion to generate a 2D layered metal‐organic framework (MOF) by using a rhomboidal‐grid as the basic building units with the 4⁴ topology. In compound 2 , the Cd(II) ion is also six‐coordinate bonded to four nitrogen atoms of two 3‐bpd, two dpe and two oxygen atoms of two NO₃^? ligands. The 3‐bpd and dpe ligands both adopt bis‐monodentate coordination mode connecting the Cd(II) ions to generate a 2D layered MOF by using a rectangle‐grid as the basic building units with the 4⁴ topology. In compound 3 , two crystallographically independent Cd(II) ions are both coordinated by four nitrogen atoms of dpe ligands in the basal plane and two nitrogen atom of NCS^? in the axial sites. The dpe acts as a bridging ligand to connect the Cd(II) ions forming a 2D interpenetrating MOFs by using a square‐grid as the basic unit with the 4⁴ topology. All of their 2D layered MOFs in compounds 1 ‐ 3 are then arranged in a parallel non‐interpenetrating ABAB—packing manner in 1 and 2 , and mutually interpenetrating manner in 3 , respectively, to extend their 3D supramolecular architectures with their 1D pores intercalated with solvent (ethanol in 1 or H₂O in 3 ) or free 3‐bpd molecules in 2 and 3 , respectively. The photoluminescence measurements of 1 ‐ 3 reveal that the emission is tentatively assigned to originate from π‐π* transition for 1 and 2 and probably due to ligand‐center luminescence for compounds 3 , respectively.     

Palladium(II)‐catalyzed cyclization of W‐(2′,4′‐dienyl)‐2‐alkynamides to α‐alkylidene‐γ‐butyrolactams

In the presence of CuCl₂, N‐(2′, 4′‐dienyl)‐2‐alkynamides can be converted to α‐alkylidene‐σ‐butyrolactams under the catalysis of palladium(II). In this reaction, CuCl₂ is used to oxidize Pd(0) to regenerate Pd(II), or the carbon‐palladium bond is quenched by the oxidative cleavage reaction of CuCl₂.     

Natural (−)‐Vasicine as a Novel Source of Optically Pure 1‐Benzylpyrrolidin‐3‐ol

A facile and scalable methodology for the preparation of optically active (3S)‐1‐benzylpyrrolidin‐3‐ol ( 3 ), an important drug precursor, is reported. Starting from the naturally occurring alkaloid (?)‐vasicine ( 1 ), a major alkaloid of the plant Adhatoda vasica, 3 was obtained in 84% overall yield (Scheme 3).     

A New Route to N‐Aryl 2‐Alkenamides,N‐Allyl N‐Aryl 2‐Alkenamides,and N‐Aryl α,β‐Unsaturated γ‐Lactams from N‐Aryl 3‐(Phenylsulfonyl)propanamides

A series of N‐aryl 2‐alkenamides were produced efficiently by treating N‐aryl 3‐(phenylsulfonyl)‐propanamides with potassium tert‐butoxide in THF at 0°C. With out isolation, it was further treated with an additional equivalent of potassium tert‐butoxide and allyl bromide to give N‐allyl N‐aryl 2‐alkenamides in one pot in good yields. Followed by a ring‐closing metathesis reaction, these N‐allyl N‐aryl 2‐alkenamides were respectively converted into corresponding N‐aryl α,β‐unsaturated γ‐lactams in moderate yields.     

High‐molecular‐weight poly(1,5‐dioxepan‐2‐one) via enzyme‐catalyzed ring‐opening polymerization

To avoid organometallic catalysts in the synthesis of poly(1,5‐dioxepan‐2‐one), the enzymatic ring‐opening polymerization of 1,5‐dioxepan‐2‐one (DXO) was performed with lipase CA (derived from Candida antarctica) as a biocatalyst. A linear relationship between the number‐average molecular weight and monomer conversion was observed, and this suggested that the product molecular weight could be controlled by the stoichiometry of the reactants. The monomer consumption followed a first‐order rate law with respect to the monomer, and no chain termination occurred. Water acted as a chain initiator, but it could cause polymer hydrolysis when it exceeded an optimum level. An initial activation via the heating of the enzyme was sufficient to start the polymerization, as the monomer conversion occurred when samples were left at room temperature after an initial heating at 60 °C. A high lipase content led to a high monomer conversion as well as a high molecular weight. An increase in the monomer conversion and molecular weight was observed when the polymerization temperature was increased from 40 to 80 °C. A further increase in the polymerization temperature led to a decrease in the monomer conversion and molecular weight because of the denaturation of the enzyme at elevated temperatures. The polymerization behavior of DXO under lipase CA catalysis was compared with that of ε‐caprolactone (CL). The rate of monomer conversion of DXO was much faster than that of CL, and this may have been due to differences in their specificity toward lipase CA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4206–4216, 2005     

NaHCO3‐Catalyzed Hihgly Regiospecific Aminobromination of ß,ß‐Dicyanostyrene Derivatives with 1,3‐Dibromo‐5,5‐dimethylhydantoin (DBDMH)

The aminobromination of β,β‐dicyanostyrene derivetives with 1,3‐dibromo‐5,5‐dimethylhydantoin (DBDMH) has been systematic studied. The reaction afforded the vicinal haloamino products in good to excellent yields at room temperature (the highest yield was up to 94 %), and the full regiospecificity of all products were achieved catalyzed by NaHCO₃ in CH₃CN. A possible pathway involving a Michael Addition reaction for this aminobromination was proposed.     

A three‐dimensional CdII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands

The title coordination polymer, poly[[aqua(μ₅‐1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dicadmium(II)] dihydrate], {[Cd₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)₂(H₂O)]·2H₂O}_n, was crystallized from a mixture of 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylic acid (H₄bpta), 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐bib) and cadmium nitrate in water–dimethylformamide. The crystal structure consists of two crystallographically independent Cd^II cations, with one of the Cd^II cations possessing a slightly distorted pentagonal bipyramidal geometry. The second Cd^II centre is coordinated by carboxylate O atoms and imidazole N atoms from two separate 1,4‐bib ligands, displaying a distorted octahedral CdN₂O₄ geometry. The completely deprotonated bpta⁴⁻ ligand, exhibiting a new coordination mode, bridges five Cd^II cations to form one‐dimensional chains viaμ₃‐η¹:η²:η¹:η² and μ₂‐η¹:η¹:η⁰:η⁰ modes, and these are further linked by 1,4‐bib ligands to form a three‐dimensional framework with a (4².6⁴)(4.6²)(4³.6⁵.7²) topology. The structure of the coordination polymer is reinforced by intermolecular hydrogen bonding between carboxylate O atoms, aqua ligands and crystallization water molecules. The solid‐state photoluminescence properties were investigated and the complex might be a candidate for a thermally stable and solvent‐resistant blue fluorescent material.