色谱分析中的串联技术

样品中物质信息的获取离不开分离和检测,对于复杂样品的分析,简单的一维色谱方法常常难以完成所有组分的分离和鉴定。为此,多种色谱串联技术引起了人们的广泛关注。色谱串联技术包括柱串联技术、检测器串联技术、多维色谱等。该文详细介绍了以上3种串联技术（不包括色谱-质谱联用技术）自2010年以来的最新研究进展,以及这些技术在获取样品中更加全面和精准的信息方面的典型应用。最后对色谱串联分析技术的发展进行了总结和展望。     

Metal-free tandem Friedel-Crafts/lactonization reaction to benzofuranones bearing a quaternary center at C3 position

A metal-free tandem Friedel-Crafts/lactonization reaction to 3,3-diaryl or 3-alkyl-3-aryl benzofuranones catalyzed by HClO(4) was reported. A variety of tertiary α-hydroxy acid esters could readily react with substituted phenols to afford the desired products in rich diversity. The synthetic utility of the products was demonstrated by the synthesis of polycyclic compounds. (1)H NMR studies supported that this tandem reaction proceeded via tandem Friedel-Crafts/lactonization sequence.     

Tandem mass spectra of tryptic peptides at signal-to-background ratios approaching unity using electrospray ionization high-field asymmetric waveform ion mobility spectrometry/hybrid quadrupole time-of-flight mass spectrometry

High-field asymmetric waveform ion mobility spectrometry (FAIMS) has been coupled to a quadrupole time-of-flight mass spectrometer for the tandem mass spectrometric analysis of tryptic peptides of pig hemoglobin. Using FAIMS, low levels (fmol/microL) of multiply charged tryptic peptides were separated from relatively intense chemical background such that their tandem mass spectra (MS/MS) lacked many background-related fragment ions observed using a conventional ESI-QqTOFMS instrument. Substantial improvements in both first-order and tandem mass spectra were realized while maintaining approximately the same absolute intensities.     

Recent progress of interconnecting layer for tandem organic solar cells

This paper has reviewed: (1) the two unique advantages of tandem organic solar cells (OSCs) compared to single OSCs; (2) the challengings as well as strategies to develop qualified interconnecting layer (ICL) for tandem OSCs. More specifically, firstly, the two key advantages unique to tandem OSCs as compared to single OSCs, namely minimizing sub-bandgap transmission and thermalization loss as well as realizing optical thick and electrical thin structures, have been discussed. Secondly, the ICL, as one of the most challenging issue in tandem OSCs that needs to fulfill the optical, electrical and mechanical requirements simultaneously to realize a qualified ICL has been reviewed. As one of the most challenging requirement among the three, the electrical requirement and its corresponding three different solving strategies have been discussed in detail, revealing a bright future for developing a general strategy to realizing qualified ICL composed of different hole transporting layer (HTL) and electron transporting layer (ETL).     

Characterization of phosphatidylethanolamine as a lithiated adduct by triple quadrupole tandem mass spectrometry with electrospray ionization

Structural characterization of the glycerophosphoethanolamine (GPE) molecule as a lithiated adduct ion by collisionally activated dissociation (CAD) tandem mass spectrometry with electrospray ionization is described. Abundant fragment ions reflecting polar head group and fatty acid constituents were observed in the product ion spectrum of GPE, which permits an unambiguous structural determination, including the regiospecificity of fatty acyl substituents. The pathways leading to the formation of fragment ions are proposed. The suggested mechanisms are supported by the tandem mass spectra of various deuterated analogs and source CAD of GPE followed by CAD tandem mass spectrometry. Identification of GPE molecular species and specific GPE subclasses in a biological mixture by tandem mass spectrometry with various constant neutral loss scannings is also described.     

Comparison of different search engines using validated MS/MS test datasets

Massive amounts of tandem mass spectra are produced in high-throughput proteomics studies. The manual interpretation of these spectra is not feasible. Instead, search engines are used to match the tandem mass spectra with sequence information contained in proteomics and genomics databases. Typically, these search engines provide a list of the best matching peptide sequences for an individual tandem mass spectrum. As well, they provide scores that are somewhat related to the confidence level in the match. Many peptide tandem mass spectra search engines have been reported. These search engines provide very different results depending on the type of mass spectrometers used and their input parameters. Here we describe a comparative analysis of different search engines using validated test sets of tandem mass spectra. We have defined test sets of MS/MS spectra derived from high throughput proteomics experiments performed by HPLC-ESI-MS/MS on ion trap (LCQ) and tandem quadrupole time-of-flight instruments with a pulsar functionality (Qstar Pulsar) mass spectrometers. We analyzed the ability of the different search engines to identify the correct peptides, and the cross-validations of the different search engines.     

Solution‐Processed Titanium Chelate Used as Both Electrode Modification Layer and Intermediate Layer for Efficient Inverted Tandem Polymer Solar Cells

Organic polymer solar cells (PSCs) have attracted increasing attention due to light weight, low cost, flexibility and roll‐to‐roll manufacturing. However, the limited light harvest range of the photoactive layer greatly restrains the power conversion efficiency (PCE) enhancement. In order to expand the light absorption range and further enhance the PCE of the PSCs, tandem structures have been designed and demonstrated. In tandem solar cell, the intermediate layer (IML) plays a critical role in physically and electrically connection of the two subcells. Herein, we apply titanium (diisopropoxide) bis(2,4‐pentanedionate) (TIPD) as both electrode modification layer and intermediate layer to investigate the feasibility in inverted tandem polymer solar cells. The same photoactive layers of PTB7‐Th:PC₇₁BM are adopted in both front and rear subcells to simplify the evaluation of effectiveness of TIPD layer in tandem structures. By modulating the treatment condition of IML and the thickness of photoactive layer, efficient inverted tandem PSCs have been achieved with minimized voltage loss and excellent charge transportation, giving a best V_oc of 1.54 V, which is almost two times that of the single bulk heterojunction (BHJ)‐PSC (0.78 V) and an enhanced PCE up to 8.11%.     

Sequence-regulated copolymers via tandem catalysis of living radical polymerization and in situ transesterification

Sequence regulation of monomers is undoubtedly a challenging issue as an ultimate goal in polymer science. To efficiently produce sequence-controlled copolymers, we herein developed the versatile tandem catalysis, which concurrently and/or sequentially involved ruthenium-catalyzed living radical polymerization and in situ transesterification of methacrylates (monomers: RMA) with metal alkoxides (catalysts) and alcohols (ROH). Typically, gradient copolymers were directly obtained from the synchronization of the two reactions: the instantaneous monomer composition in feed gradually changed via the transesterification of R(1)MA into R(2)MA in the presence of R(2)OH during living polymerization to give R(1)MA/R(2)MA gradient copolymers. The gradient sequence of monomers along a chain was catalytically controlled by the reaction conditions such as temperature, concentration and/or species of catalysts, alcohols, and monomers. The sequence regulation of multimonomer units was also successfully achieved in one-pot by monomer-selective transesterification in concurrent tandem catalysis and iterative tandem catalysis, providing random-gradient copolymers and gradient-block counterparts, respectively. In contrast, sequential tandem catalysis via the variable initiation of either polymerization or in situ transesterification led to random or block copolymers. Due to the versatile adaptability of common and commercially available reagents (monomers, alcohols, catalysts), this tandem catalysis is one of the most efficient, convenient, and powerful tools to design tailor-made sequence-regulated copolymers.     

Phosphine-catalyzed tandem reaction of allenoates with nitroalkenes

A P(p-FC(6)H(4))(3)-catalyzed tandem reaction between ethyl 2,3-butadienoate and nitroalkenes has been developed, which involves a [3 + 2] cycloaddition and a subsequent umpolung addition. The asymmetric version of this tandem reaction has also been investigated by using chiral phosphanes.     

Generation of 3-(1H-pyrrol-3-yl)-1H-inden-1-ones via a tandem reaction of 1-(2-alkynylphenyl)-2-enone, 2-isocyanoacetate, and water

A silver triflate-catalyzed tandem reaction of 1-(2-alkynylphenyl)-2-enone, 2-isocyanoacetate, and water provides a novel and efficient route for the delivery of 3-(1H-pyrrol-3-yl)-1H-inden-1-ones. Four bonds are formed during the tandem process.     

Effect of electrospray ionization conditions on low-energy tandem mass spectra of peptides

The effect of electrospray ionization (ESI) conditions on low-energy tandem mass spectra of peptides in the relative molecular mass range 400–1200 was examined. For singly charged peptide ions the source skimmer potential (which determines the degree of acceleration of the ions through the intermediate pressure region in the source) can strongly influence the extent of fragmentation observed in tandem mass spectra, especially at low collision energies. For each peptide there is an optimum skimmer potential which represents a balance between generating ions with sufficient internal energy for subsequent tandem mass spectrometric experiments and inducing the onset of other processes such as source fragmentation. The fragmentation which can be achieved in tandem mass spectra with high skimmer potentials differs from ESI source fragmentation for the same peptides. We have found that fragmentation in ESI mass spectra depends both on skimmer potential and on solvent pH, presumably because the latter determines the proportion of doubly charged species generated from a given peptide. Low-energy tandem mass spectra of peptides following ESI are equally as sensitive to peptide structure and the type of adduct studied (e.g. [M + H]⁺ vs. [M + NH₄]⁺) as tandem mass spectra obtained following older ionization methods such as fast atom bombardment.     

Rhodium-catalyzed tandem conjugate addition-Mannich cyclization reaction: straightforward access to fully substituted tetrahydroquinolines

A new Rh(I)-catalyzed tandem conjugate addition-Mannich cyclization reaction of imine-substituted electron-deficient alkenes with arylboronic acids has been developed to afford 2,3,4-trisubstituted 1,2,3,4-tetrahydroquinolines. This is the first example involving imine group as a secondary electrophile in Rh(I)-catalyzed tandem reactions.     

Tandem Blaise-Nenitzescu reaction: one-pot synthesis of 5-hydroxy-α-(aminomethylene)benzofuran-2(3H)-ones from nitriles

In contrast to the reaction of benzoquinones with β-enaminoesters providing indoles (Nenitzescu reaction), the tandem one-pot reaction of the Blaise reaction intermediate, zinc bromide complex of β-enaminoesters, with benzoquinone affords 5-hydroxy-α-(aminomethylene)benzofuran-2(3H)-ones in good to excellent yields (tandem Blaise-Nenitzescu reaction).     

Gold coating of non-conductive membranes before matrix-assisted laser desorption/ionization tandem mass spectrometric analysis prevents charging effect

Acquisition of tandem mass spectra from peptides or other analytes deposited on non-conductive membranes is inhibited on instruments combining matrix-assisted laser desorption/ionization with tandem time-of-flight analyzers (MALDI-TOF/TOF) due to a charging effect. A thin layer of gold renders the membrane conductive. This allows adequate data acquisition on MALDI-TOF/TOF systems. Therefore, this methodology extends the capacity of the molecular scanner concept to tandem mass spectrometry.     

Development of the intramolecular Prins cyclization/Schmidt reaction for the construction of the azaspiro[4,4]nonane: application to the formal synthesis of (±)-stemonamine

A TiCl(4)-promoted tandem intramolecular Prins cyclization/Schmidt reaction has been designed and developed to be an efficient method for the construction of the azaspiro[4,4]nonane. The present tandem protocol has been employed to construct the tricyclic azaquaternary skeleton (ring A, B, and C) of stemonamine.     

Auto‐Tandem Catalysis: A Single Catalyst Activating Mechanistically Distinct Reactions in a Single Reactor

Domino reactions have received great attention as efficient synthetic methodologies for the construction of structurally complex molecules from simple materials in a single operation. Catalysts in domino reactions have also been well studied. In these reactions, a catalyst activates the substrate(s) only once, and the structure of the product is delineated at that time. Recently, the new concept of “tandem catalysis” in domino reactions, in which catalyst(s) sequentially activate more than two mechanistically distinct reactions, has been proposed. Tandem catalysis is categorized into three subclasses: orthogonal‐, auto‐, and assisted‐tandem catalyses. Auto‐tandem catalysis is defined as a process in which one catalyst promotes more than two fundamentally different reactions in a single reactor. An overview of recent and significant achievements in auto‐tandem catalysis is presented in this paper.     

One-pot synthesis of 3-trifluoromethylbenzofurans via tandem iodocyclization and trifluoromethylation of 2-alkynylanisoles

A two-step, one-pot tandem iodocyclization and trifluoromethylation have been developed. A variety of 3-trifluoromethylbenzofurans were prepared in moderate to good yields via the tandem reaction of 2-alkynylanisoles with elemental iodine and (trifluoromethyl)trimethylsilane.     

Efficient All-Perovskite Tandem Solar Cells with Low-Optical-Loss Carbazolyl Interconnecting Layers

Combining wide-band gap (WBG) and narrow-band gap (NBG) perovskites with interconnecting layers (ICLs) to construct monolithic all-perovskite tandem solar cell is an effective way to achieve high power conversion efficiency (PCE). However, optical losses from ICLs need to be further reduced to leverage the full potential of all-perovskite tandem solar cells. Here, metal oxide nanocrystal layers anchored with carbazolyl hole-selective-molecules (CHs), which exhibit much lower optical loss, is employed to replace poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT : PSS) as the hole transporting layers (HTLs) in lead-tin (Pb-Sn) perovskite sub-cells and ICLs in all-perovskite tandem solar cells. Optically transparent indium tin oxide nanocrystals (ITO NCs) layers are employed to enhance anchoring of CHs, while a mixture of two CHs is adopted to tune the surface energy-levels of ITO NCs. The optimized mixed Pb-Sn NBG perovskite solar cells demonstrate a high PCE of 23.2 %, with a high short-circuit current density (J_sc) of 33.5 mA cm⁻². A high PCE of 28.1 % is further obtained in all-perovskite tandem solar cells, with the highest J_sc of 16.7 mA cm⁻² to date. Encapsulated tandem solar cells maintain 90 % of their reference point after 500 h of operation at the maximum power point (MPP) under 1-Sun illumination.     

Comparison of supercritical fluid chromatography–tandem mass spectrometry and liquid chromatography–tandem mass spectrometry for the stereoselective analysis of chlorfenvinphos and dimethylvinphos in tobacco

This study used reversed-phase liquid chromatography–tandem mass spectrometry and supercritical fluid chromatography–tandem mass spectrometry for determination of the stereoisomers of chlorfenvinphos and dimethylvinphos in tobacco. Tobacco samples were extracted and purified with a modified quick, easy, cheap, effective, rugged, and safe technique using spherical carbon. The performance of both methodologies was comprehensively compared in terms of methods validation parameters (separation efficiency, linearity, selectivity, recovery, repeatability, sensitivity, matrix effect, etc.). Under optimized conditions, the calibration curves of the stereoisomers of chlorfenvinphos and dimethylvinphos in the range of 10–500 ng/mL showed excellent linearity with R² ≥ 0.997 in both methods. The adequate recoveries of analytes from three different spiked tobaccos were obtained using reversed-phase liquid chromatography–tandem mass spectrometry (86.1–95.7%) as well as supercritical fluid chromatography–tandem mass spectrometry (86.5–94.0%). The relative standard deviations for spiked samples were all below 7.0%. Compared with supercritical fluid chromatography–tandem mass spectrometry, lower matrix effects and LODs can be obtained in reversed-phase liquid chromatography–tandem mass spectrometry.     

Non-carbonyl-stabilized metallocarbenoids in synthesis: the development of a tandem rhodium-catalyzed bamford-stevens/thermal aliphatic claisen rearrangement sequence

A tandem rhodium-catalyzed Bamford-Stevens/Claisen rearrangement is presented. The tandem reaction uses Eschenmoser hydrazones for the in situ generation of non-carbonyl-stabilized diazo alkanes, which are presumably intercepted by Rh(II) catalysts to induce a 1,2-hydride migration. This sequence provides high levels of stereocontrol for the generation of simple acyclic (Z)-enol ethers. These enol ethers undergo either thermal or Lewis acid accelerated Claisen rearrangements to provide products of high diastereopurity. Also presented are cascade reactions, wherein a third chemical step occurs after the initial tandem sequence (i.e., Bamford-Stevens/Claisen/ene and Bamford-Stevens/Claisen/Cope).