P2‐NaCo0.5Mn0.5O2 as a Positive Electrode Material for Sodium‐Ion Batteries

As a promising positive electrode material for sodium‐ion batteries (SIBs), layered sodium oxides have attracted considerable attention in recent years. In this work, stoichiometric P2‐phase NaCo_0.5Mn_0.5O₂ was prepared through the conventional solid‐state reaction, and its structural and physical properties were studied in terms of XRD, XPS, and magnetic susceptibility. Furthermore, the P2‐NaCo_0.5Mn_0.5O₂ electrode delivered a discharge capacity of 124.3 mA h g^?1 and almost 100 % initial coulombic efficiency over the potential window of 1.5–4.15 V. It also showed good cycle stability, with a reversible capacity and capacity retention reaching approximately 85 mA h g^?1 and 99 %, respectively, at the 5 C rate after 100 cycles. Additionally, cyclic voltammetry and ex situ XRD were employed to explain the electrochemical behavior at the different electrochemical stages. Owing to the applicable performances, P2‐NaCo_0.5Mn_0.5O₂ can be considered as a potential positive electrode material for SIBs.     

Electrochemical Properties and Sodium‐Storage Mechanism of Ag2Mo2O7 as the Anode Material for Sodium‐Ion Batteries

Silver molybdate, Ag₂Mo₂O₇, has been prepared by a conventional solid‐state reaction. Its electrochemical properties as an anode material for sodium‐ion batteries (SIBs) have been comprehensively examined by means of galvanostatic charge–discharge cycling, cyclic voltammetry, and rate performance measurements. At operating voltages between 3.0 and 0.01 V, the electrode delivered a reversible capacity of nearly 190 mA h g^?1 at a current density of 20 mA g^?1 after 70 cycles. Ag₂Mo₂O₇ also demonstrated a good rate capability and long‐term cycle stability, the capacity reaching almost 100 mA h g^?1 at a current density of 500 mA g^?1, with a capacity retention of 55 % over 1000 cycles. Moreover, the sodium storage process of Ag₂Mo₂O₇ has been investigated by means of ex situ XRD, Raman spectroscopy, and HRTEM. Interestingly, the anode decomposes into Ag metal and Na₂MoO₄ during the initial discharge process, and then Na⁺ ions are considered to be inserted into/extracted from the Na₂MoO₄ lattice in the subsequent cycles governed by an intercalation/deintercalation mechanism. Ex situ HRTEM images revealed that Ag metal not only remains unchanged during the sodiation/desodiation processes, but is well dispersed throughout the amorphous matrix, thereby greatly improving the electronic conductivity of the working electrode. The “in situ” decomposition behavior of Ag₂Mo₂O₇ is distinct from that of chemically synthesized, metal‐nanoparticle‐coated electrode materials, and provides strong supplementary insight into the mechanism of such new anode materials for SIBs and may set a precedent for the design of further materials.     

Cobalt‐Doped FeS2 Nanospheres with Complete Solid Solubility as a High‐Performance Anode Material for Sodium‐Ion Batteries

Considering that the high capacity, long‐term cycle life, and high‐rate capability of anode materials for sodium‐ion batteries (SIBs) is a bottleneck currently, a series of Co‐doped FeS₂ solid solutions with different Co contents were prepared by a facile solvothermal method, and for the first time their Na‐storage properties were investigated. The optimized Co_0.5Fe_0.5S₂ (Fe0.5) has discharge capacities of 0.220 Ah g^?1 after 5000 cycles at 2 A g^?1 and 0.172 Ah g^?1 even at 20 A g^?1 with compatible ether‐based electrolyte in a voltage window of 0.8–2.9 V. The Fe0.5 sample transforms to layered Na_xCo_0.5Fe_0.5S₂ by initial activation, and the layered structure is maintained during following cycles. The redox reactions of Na_xCo_0.5Fe_0.5S₂ are dominated by pseudocapacitive behavior, leading to fast Na⁺ insertion/extraction and durable cycle life. A Na₃V₂(PO₄)₃/Fe0.5 full cell was assembled, delivering an initial capacity of 0.340 Ah g^?1.     

MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries

MoS₂ nanoflowers with expanded interlayer spacing of the (002) plane were synthesized and used as high‐performance anode in Na‐ion batteries. By controlling the cut‐off voltage to the range of 0.4–3 V, an intercalation mechanism rather than a conversion reaction is taking place. The MoS₂ nanoflower electrode shows high discharge capacities of 350 mAh g^?1 at 0.05 A g^?1, 300 mAh g^?1 at 1 A g^?1, and 195 mAh g^?1 at 10 A g^?1. An initial capacity increase with cycling is caused by peeling off MoS₂ layers, which produces more active sites for Na⁺ storage. The stripping of MoS₂ layers occurring in charge/discharge cycling contributes to the enhanced kinetics and low energy barrier for the intercalation of Na⁺ ions. The electrochemical reaction is mainly controlled by the capacitive process, which facilitates the high‐rate capability. Therefore, MoS₂ nanoflowers with expanded interlayers hold promise for rechargeable Na‐ion batteries.     

Bismuth Nanoparticles Embedded in Carbon Spheres as Anode Materials for Sodium/Lithium‐Ion Batteries

Sodium‐ion batteries (SIBs) are regarded as an attractive alternative to lithium‐ion batteries (LIBs) for large‐scale commercial applications, because of the abundant terrestrial reserves of sodium. Exporting suitable anode materials is the key to the development of SIBs and LIBs. In this contribution, we report on the fabrication of Bi@C microspheres using aerosol spray pyrolysis technique. When used as SIBs anode materials, the Bi@C microsphere delivered a high capacity of 123.5 mAh g^?1 after 100 cycles at 100 mA g^?1. The rate performance is also impressive (specific capacities of 299, 252, 192, 141, and 90 mAh g^?1 are obtained under current densities of 0.1, 0.2, 0.5, 1, and 2 A g^?1, respectively). Furthermore, the Bi@C microsphere also proved to be suitable LIB anode materials. The excellent electrochemical performance for both SIBs and LIBs can attributed to the Bi@C microsphere structure with Bi nanoparticles uniformly dispersed in carbon spheres.     

Nafion/Titanium Dioxide‐Coated Lithium Anode for Stable Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have shown great potential as high energy‐storage devices. However, the stability of the Li metal anode is still a major concern. This is due to the formation of lithium dendrites and severe side reactions with polysulfide intermediates. We herein develop an anode protection method by coating a Nafion/TiO₂ composite layer on the Li anode to solve these problems. In this architecture, Nafion suppresses the growth of Li dendrites, protects the Li anode, and prevents side reactions between polysulfides and the Li anode. Moreover, doped TiO₂ further improves the ionic conductivity and mechanical properties of the Nafion membrane. Li–S batteries with a Nafion/TiO₂‐coated Li anode exhibit better cycling stability (776 mA h g^?1 after 100 cycles at 0.2 C, 1 C=1672 mA g^?1) and higher rate performance (787 mA h g^?1 at 2 C) than those with a pristine Li anode. This work provides an alternative way to construct stable Li anodes for high‐performance Li–S batteries.     

Cu3V2O8 Nanoparticles as Intercalation‐Type Anode Material for Lithium‐Ion Batteries

Cu₃V₂O₈ nanoparticles with particle sizes of 40–50 nm have been prepared by the co‐precipitation method. The Cu₃V₂O₈ electrode delivers a discharge capacity of 462 mA h g^?1 for the first 10 cycles and then the specific capacity, surprisingly, increases to 773 mA h g^?1 after 50 cycles, possibly as a result of extra lithium interfacial storage through the reversible formation/decomposition of a solid electrolyte interface (SEI) film. In addition, the electrode shows good rate capability with discharge capacities of 218 mA h g^?1 under current densities of 1000 mA g^?1. Moreover, the lithium storage mechanism for Cu₃V₂O₈ nanoparticles is explained on the basis of ex situ X‐ray diffraction data and high‐resolution transmission electron microscopy analyses at different charge/discharge depths. It was evidenced that Cu₃V₂O₈ decomposes into copper metal and Li₃VO₄ on being initially discharged to 0.01 V, and the Li₃VO₄ is then likely to act as the host for lithium ions in subsequent cycles by means of the intercalation mechanism. Such an “in situ” compositing phenomenon during the electrochemical processes is novel and provides a very useful insight into the design of new anode materials for application in lithium‐ion batteries.     

Core–Shell Carbon‐Coated CuO Nanocomposites: A Highly Stable Electrode Material for Supercapacitors and Lithium‐Ion Batteries

Herein we present a simple method for fabricating core–shell mesostructured CuO@C nanocomposites by utilizing humic acid (HA) as a biomass carbon source. The electrochemical performances of CuO@C nanocomposites were evaluated as an electrode material for supercapacitors and lithium‐ion batteries. CuO@C exhibits an excellent capacitance of 207.2 F g^?1 at a current density of 1 A g^?1 within a potential window of 0–0.46 V in 6 M KOH solution. Significantly, CuO electrode materials achieve remarkable capacitance retentions of approximately 205.8 F g^?1 after 1000 cycles of charge/discharge testing. The CuO@C was further applied as an anode material for lithium‐ion batteries, and a high initial capacity of 1143.7 mA h g^?1 was achieved at a current density of 0.1 C. This work provides a facile and general approach to synthesize carbon‐based materials for application in large‐scale energy‐storage systems.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Assembly of SnSe Nanoparticles Confined in Graphene for Enhanced Sodium‐Ion Storage Performance

Sodium‐ion batteries (SIBs) have attracted much interest as a low‐cost and environmentally benign energy storage system, but more attention is justifiably required to address the major technical issues relating to the anode materials to deliver high reversible capacity, superior rate capability, and stable cyclability. A SnSe/reduced graphene oxide (RGO) nanocomposite has been prepared by a facile ball‐milling method, and its structural, morphological, and electrochemical properties have been characterized and compared with those of the bare SnSe material. Although the redox behavior of SnSe remains nearly unchanged upon the incorporation of RGO, its electrochemical performance is significantly enhanced, as reflected by a high specific capacity of 590 mA h g^?1 at 0.050 A g^?1, a rate capability of 260 mA h g^?1 at 10 A g^?1, and long‐term stability over 120 cycles. This improvement may be attributed to the high electronic conductivity of RGO, which also serves as a matrix to buffer changes in volume and maintain the mechanical integrity of the electrode during (de)sodiation processes. In view of its excellent Na⁺ storage performance, this SnSe/RGO nanocomposite has potential as an anode material for SIBs.     

Boron‐Doped,Carbon‐Coated SnO2/Graphene Nanosheets for Enhanced Lithium Storage

Heteroatom doping is an effective method to adjust the electrochemical behavior of carbonaceous materials. In this work, boron‐doped, carbon‐coated SnO₂/graphene hybrids (BCTGs) were fabricated by hydrothermal carbonization of sucrose in the presence of SnO₂/graphene nanosheets and phenylboronic acid or boric acid as dopant source and subsequent thermal treatment. Owing to their unique 2D core–shell architecture and B‐doped carbon shells, BCTGs have enhanced conductivity and extra active sites for lithium storage. With phenylboronic acid as B source, the resulting hybrid shows outstanding electrochemical performance as the anode in lithium‐ion batteries with a highly stable capacity of 1165 mA h g^?1 at 0.1 A g^?1 after 360 cycles and an excellent rate capability of 600 mA h g^?1 at 3.2 A g^?1, and thus outperforms most of the previously reported SnO₂‐based anode materials.     

Lithium Germanate (Li2GeO3): A High‐Performance Anode Material for Lithium‐Ion Batteries

A simple, cost‐effective, and easily scalable molten salt method for the preparation of Li₂GeO₃ as a new type of high‐performance anode for lithium‐ion batteries is reported. The Li₂GeO₃ exhibits a unique porous architecture consisting of micrometer‐sized clusters (secondary particles) composed of numerous nanoparticles (primary particles) and can be used directly without further carbon coating which is a common exercise for most electrode materials. The new anode displays superior cycling stability with a retained charge capacity of 725 mAh g^?1 after 300 cycles at 50 mA g^?1. The electrode also offers excellent rate capability with a capacity recovery of 810 mAh g^?1 (94 % retention) after 35 cycles of ascending steps of current in the range of 25–800 mA g^?1 and finally back to 25 mA g^?1. This work emphasizes the importance of exploring new electrode materials without carbon coating as carbon‐coated materials demonstrate several drawbacks in full devices. Therefore, this study provides a method and a new type of anode with high reversibility and long cycle stability.     

Pyrene‐Anderson‐Modified CNTs as Anode Materials for Lithium‐Ion Batteries

An organo‐functionalized polyoxometalate (POM)–pyrene hybrid (Py‐Anderson) has been used for noncovalent functionalization of carbon nanotubes (CNTs) to give a Py‐Anderson‐CNT nanocomposite through π–π interactions. The as‐synthesized nanocomposite was used as the anode material for lithium‐ion batteries, and shows higher discharge capacities and better rate capacity and cycling stability than the individual components. When the current density was 0.5 mA cm^?2, the nanocomposite exhibited an initial discharge capacity of 1898.5 mA h g^?1 and a high discharge capacity of 665.3 mA h g^?1 for up to 100 cycles. AC impedance spectroscopy provides insight into the electrochemical properties and the charge‐transfer mechanism of the Py‐Anderson‐CNTs electrode.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High‐Energy Sodium‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered as alternatives to lithium‐ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8‐tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox‐active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

High‐Performance Sodium‐Ion Batteries and Sodium‐Ion Pseudocapacitors Based on MoS2/Graphene Composites

Sodium‐ion energy storage, including sodium‐ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium‐ion energy storage. It is an intriguing prospect, especially for large‐scale applications, owing to its low cost and abundance. MoS₂ sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS₂/G) were constructed. The enlarged d‐spacing, a contribution of the graphene matrix, and the unique properties of the MoS₂/G substantially optimize Na storage behavior, by accommodating large volume changes and facilitating fast ion diffusion. MoS₂/G exhibits a stable capacity of approximately 350 mAh g^?1 over 200 cycles at 0.25 C in half cells, and delivers a capacitance of 50 F g^?1 over 2000 cycles at 1.5 C in pseudocapacitors with a wide voltage window of 0.1–2.5 V.     

Towards Highly Stable Storage of Sodium Ions: A Porous Na3V2(PO4)3/C Cathode Material for Sodium‐Ion Batteries

A porous Na₃V₂(PO₄)₃ cathode material coated uniformly with a layer of approximately 6 nm carbon has been synthesized by the sol–gel method combined with a freeze‐drying process. The special porous morphology and structure significantly increases the specific surface area of the material, which greatly enlarges the contact area between the electrode and electrolyte, and consequently supplies more active sites for sodium ions. When employed as a cathode material of sodium‐ion batteries, this porous Na₃V₂(PO₄)₃/C exhibits excellent rate performance and cycling stability; for instance, it shows quite a flat potential plateau at 3.4 V in the potential window of 2.7–4.0 V versus Na⁺/Na and delivers an initial capacity as high as 118.9 and 98.0 mA h g^?1 at current rates of 0.05 and 0.5 C, respectively, and after 50 cycles, a good capacity retention of 92.7 and 93.6 % are maintained. Moreover, even when the discharge current density is increased to 5 C (590 mA g^?1), an initial capacity of 97.6 mA h g^?1 can still be achieved, and an exciting capacity retention of 88.6 % is obtained after 100 cycles. The good cycle performance, excellent rate capability, and moreover, the low cost of Na₃V₂(PO₄)₃/C suggest that this material is a promising cathode for large‐scale sodium‐ion rechargeable batteries.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

A Bio‐Inspired,Heavy‐Metal‐Free,Dual‐Electrolyte Liquid Battery towards Sustainable Energy Storage

Wide‐scale exploitation of renewable energy requires low‐cost efficient energy storage devices. The use of metal‐free, inexpensive redox‐active organic materials represents a promising direction for environmental‐friendly, cost‐effective sustainable energy storage. To this end, a liquid battery is designed using hydroquinone (H₂BQ) aqueous solution as catholyte and graphite in aprotic electrolyte as anode. The working potential can reach 3.4 V, with specific capacity of 395 mA h g⁻¹ and stable capacity retention about 99.7 % per cycle. Such high potential and capacity is achieved using only C, H and O atoms as building blocks for redox species, and the replacement of Li metal with graphite anode can circumvent potential safety issues. As H₂BQ can be extracted from biomass directly and its redox reaction mimics the bio‐electrochemical process of quinones in nature, using such a bio‐inspired organic compound in batteries enables access to greener and more sustainable energy‐storage technology.     

A Bio‐Inspired,Heavy‐Metal‐Free,Dual‐Electrolyte Liquid Battery towards Sustainable Energy Storage

Wide‐scale exploitation of renewable energy requires low‐cost efficient energy storage devices. The use of metal‐free, inexpensive redox‐active organic materials represents a promising direction for environmental‐friendly, cost‐effective sustainable energy storage. To this end, a liquid battery is designed using hydroquinone (H₂BQ) aqueous solution as catholyte and graphite in aprotic electrolyte as anode. The working potential can reach 3.4 V, with specific capacity of 395 mA h g^?1 and stable capacity retention about 99.7 % per cycle. Such high potential and capacity is achieved using only C, H and O atoms as building blocks for redox species, and the replacement of Li metal with graphite anode can circumvent potential safety issues. As H₂BQ can be extracted from biomass directly and its redox reaction mimics the bio‐electrochemical process of quinones in nature, using such a bio‐inspired organic compound in batteries enables access to greener and more sustainable energy‐storage technology.     

Micro‐MoS2 with Excellent Reversible Sodium‐Ion Storage

Low storage capacity and poor cycling stability are the main drawbacks of the electrode materials for sodium‐ion (Na‐ion) batteries, due to the large radius of the Na ion. Here we show that micro‐structured molybdenum disulfide (MoS₂) can exhibit high storage capacity and excellent cycling and rate performances as an anode material for Na‐ion batteries by controlling its intercalation depth and optimizing the binder. The former method is to preserve the layered structure of MoS₂, whereas the latter maintains the integrity of the electrode during cycling. A reversible capacity of 90 mAh g^?1 is obtained on a potential plateau feature when less than 0.5 Na per formula unit is intercalated into micro‐MoS₂. The fully discharged electrode with sodium alginate (NaAlg) binder delivers a high reversible capacity of 420 mAh g^?1. Both cells show excellent cycling performance. These findings indicate that metal chalcogenides, for example, MoS₂, can be promising Na‐storage materials if their operation potential range and the binder can be appropriately optimized.