Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.     

Cloning of a New Xylanase Gene from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. TN119 Using a Modified Thermal Asymmetric Interlaced-PCR Specific for GC-Rich Genes and Biochemical Characterization

A bacterial strain, Streptomyces sp. TN119, was isolated from the gut of Batocera horsfieldi larvae and showed xylanolytic activity. A degenerate primer set was designed based on the base usage of G and C in Actinobacteria xylanase-coding sequences belonging to the glycosyl hydrolases family 10 (GH 10), and used to clone the partial xylanase gene from Streptomyces sp. TN119. A modified thermal asymmetric interlaced (TAIL)-PCR specific for high-GC genes, named GC TAIL-PCR, was developed to obtain the full-length xylanase gene (xynA119; 1089 bp). Rich in GC content (67.8%), xynA119 encodes a new GH 10 xylanase (XynA119), which shares highest identity (48.8%) with an endo-1,4-β-xylanase from Cellulosimicrobium sp. HY-12. Recombinant XynA119 was expressed in Escherichia coli BL21 (DE3) and purified to electrophoretic homogeneity. The enzyme showed maximal activity at pH 6.5 and 60 °C, was stable at pH 4.0 to 10.0 and 50 °C, was resistant to most chemicals (except for Cu²⁺, Mn²⁺, Ag⁺, Hg²⁺ and SDS) and trypsin, and produced simple products. The specific activity, K _m, V _max, and k _cat using oat-spelt xylan as substrate were 57.9 U mg⁻¹, 1.0 mg ml⁻¹, 74.8 μmol min⁻¹ mg⁻¹, and 49.2 s^–1, respectively.     

Highly Thermostable Xylanase of the Thermophilic Fungus Talaromyces thermophilus: Purification and Characterization

A thermostable xylanase from a newly isolated thermophilic fungus Talaromyces thermophilus was purified and characterized. The enzyme was purified to homogeneity by ammonium sulfate precipitation, diethylaminoethyl cellulose anion exchange chromatography, P-100 gel filtration, and Mono Q chromatography with a 23-fold increase in specific activity and 17.5% recovery. The molecular weight of the xylanase was estimated to be 25kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and gel filtration. The enzyme was highly active over a wide range of pH from 4.0 to 10.0. The relative activities at pH5.0, 9.0, and 10.0 were about 80%, 85.0%, and 60% of that at pH7.5, respectively. The optimum temperature of the purified enzyme was 75°C. The enzyme showed high thermal stability at 50°C (7days) and the half-life of the xylanase at 100°C was 60min. The enzyme was free from cellulase activity. K _m and V _max values at 50°C of the purified enzyme for birchwood xylan were 22.51mg/ml and 1.235μmol min⁻¹ mg⁻¹, respectively. The enzyme was activated by Ag⁺, Co²⁺, and Cu²⁺; on the other hand, Hg²⁺, Ba²⁺, and Mn²⁺ inhibited the enzyme. The present study is among the first works to examine and describe a secreted, cellulase-free, and highly thermostable xylanase from the T. thermophilus fungus whose application as a pre-bleaching aid is of apparent importance for pulp and paper industries.     

Purification and Characterization of Extracellular Inulinase from a Marine Yeast <Emphasis Type="Italic">Cryptococcus aureus</Emphasis> G7a and Inulin Hydrolysis by the Purified Inulinase

The extracellular inulinase in the supernatant of the cell culture of the marine yeast Cryptococcus aureus G7a was purified to homogeneity with a 7.2-fold increase in specific inulinase activity compared to that in the supernatant by ultrafiltration, concentration, gel filtration chromatography (Sephadex™ G-75), and anion exchange chromatography (DEAE sepharose fast flow anion exchange). The molecular mass of the purified enzyme was estimated to be 60.0 kDa. The optimal pH and temperature of the purified enzyme were 5.0 and 50 °C, respectively. The enzyme was activated by Ca²⁺, K⁺, Na⁺, Fe²⁺, and Zn²⁺. However, Mg²⁺, Hg²⁺, and Ag⁺ acted as inhibitors in decreasing the activity of the purified inulinase. The enzyme was strongly inhibited by phenylmethanesulphonyl fluoride (PMSF), iodoacetic acid, EDTA, and 1,10-phenanthroline. The K _m and V _max values of the purified enzyme for inulin were 20.06 mg/ml and 0.0085 mg/min, respectively. A large amount of monosaccharides were detected after the hydrolysis of inulin with the purified inulinase, indicating the purified inulinase had a high exoinulinase activity.     

Characterization of Cyclodextrin Glucanotransferase Produced by <Emphasis Type="Italic">Bacillus megaterium</Emphasis>

Cyclodextrin glucanotransferase, produced by Bacillus megaterium, was characterized, and the biochemical properties of the purified enzyme were determined. The substrate specificity of the enzyme was tested with different α-1,4-glucans. Cyclodextrin glucanotransferase displayed maximum activity in the case of soluble starch, with a K _m value of 3.4 g/L. The optimal pH and temperature values for the cyclization reaction were 7.2 and 60 °C, respectively. The enzyme was stable at pH 6.0–10.5 and 30 °C. The enzyme activity was activated by Sr²⁺, Mg²⁺, Co²⁺, Mn²⁺, and Cu²⁺, and it was inhibited by Zn²⁺and Ag⁺. The molecular mass of cyclodextrin glucanotransferase was established to be 73,400 Da by sodium dodecyl sulfate–polyacrylamide gel electrophoresis, 68,200 Da by gel chromatography, and 75,000 Da by mass spectrometry. The monomer form of the enzyme was confirmed by the analysis of the N-terminal amino acid sequence. Cyclodextrin glucanotransferase formed all three types of cyclodextrins, but the predominant product was β-cyclodextrin.     

Purification and partial characterization ofRhizomucor miehei lipase for ester synthesis

A commercialRhizomucor miehei lipase was purified by ammonium sulfate precipitation. Phenyl Sepharose 6 Fast Row hydrophobic interaction chromatography, and DEAE Sepharose Fast Flow anion-exchange chromatography. The recovery of lipase activity was 32% with a 42-fold purification. The molecular size of the purified enzyme was 31,600 Dalton and the pI 3.8. The enzyme was stable for at least 24 h within a pH range of 7.0-10.0, and 96.8% of the enzyme activity remained when kept at 30‡C for 24 h. Further, about 10–30% of the lipase activity was inhibited by K⁺, Li⁺, Ni⁺, Co²⁺, Zn²⁺, Mg²⁺, Sn²⁺, Cu²⁺, Ba²⁺, Ca²⁺, and Fe²⁺ ions and by SDS, but EDTA had no effect. Under the experimental conditions, the optimum temperature for the hydrolysis of olive oil was 50‡C (pH 8.0), and for the synthesis of 1-butyl oleate, 37‡C. It was concluded that hydrolytic activity of lipase alone is not a sufficient criterion for its synthetic potential. The optimal molar ratio of oleic acid and 1-butanol was 2:1 for 1-butyl oleate synthesis. The 1-butyl oleate yield was unaffected by purification of the enzyme after 12 h.     

Pentavalent Arsenate Reductase Activity in Cytosolic Fractions of <Emphasis Type="Italic">Pseudomonas</Emphasis> sp., Isolated from Arsenic-Contaminated Sites of Tezpur,Assam

Pentavalent arsenate reductase activity was localized and characterized in vitro in the cytosolic fraction of a newly isolated bacterial strain from arsenic-contaminated sites. The bacterium was gram negative, rod-shaped, nonmotile, non-spore-forming, and noncapsulated, and the strain was identified as Pseudomonas sp. DRBS1 following biochemical and molecular approaches. The strain Pseudomonas sp. DRBS1 exhibited enzymatic machinery for reduction of arsenate(V) to arsenite(III). The suspended culture of the bacterium reduced more than 97% of As(V) (40–100 mM) to As(III) in 48 h. The growth rate and total cellular yield decreased in the presence of higher concentration of arsenate. The suspended culture repeatedly reduced 10 mM As(V) within 5 h up to five consecutive inputs. The cell-free extracts reduced 86% of 100 μM As(V) in 40 min. The specific activity of arsenate reductase enzyme in the presence of 100 μM arsenate is 6.68 μmol/min per milligram protein. The arsenate reductase activity is maximum at 30 °C and at pH 5.2. The arsenate reductase activity increased in the presence of electron donors like citrate, glucose, and galactose and metal ions like Cd⁺², Cu⁺², Ca⁺², and Fe⁺². Selenate as an electron donor also supports the growth of strain DRBS1 and significantly increased the arsenate reduction.     

Production and properties of 3-cyanopyridine hydratase inRhodococcus equi SHB-121

A strain ofRhodococcus equi SHB-121 forming 3-cyanopyridine hydratase was screened from nitrile-polluted soil. The optimum conditions for the formation of 3-cyanopyridine hydratase by the strain SHB-121 have been studied. Under the optimum conditions, the specific activity of the enzyme reached 5.32 U/mg of dry cell, 95 times higher than that cultured in screening medium. In addition, the activity of coexistent amidase was very low. 3-Cyanopyridine hydratase was purified from methylacrylamide-induced cells ofRh. equi SHB-121 by procedures including ultrasonic oscillation, ammonium sulfate precipitation, and column chromatographies on DEAE-cellulose DE52, hydroxyapatite, and Sephadex G-25. The overall purification was 31-fold. The molecular weight of the enzyme was about 30 kDA by SDS-PAGE. The pI value was 4.1. The transition temperature and pH were 7.0°C and 6.0, respectively, resulting from the differential spectra. The optimum pH and temperature for the enzyme reaction were 8.0 and 30°C. The enzyme activity was strongly inhibited by Ag⁺, Hg²⁺, Cu²⁺, and NH₄ ⁺, whereas it was enhanced by Fe³⁺ slightly. The enzyme catalyzed the hydration of 3-cyanopyridine to nicotinamide, and itsKm value was 0.1 mol/L. Uncompetitive inhibitor sodium cyanide has a K, value of 5 mmol/L.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Production and Characteristics of the Whole-Cell Lipase from Organic Solvent Tolerant <Emphasis Type="BoldItalic">Burkholderia</Emphasis> sp. ZYB002

The thermostable and organic solvent tolerant whole-cell lipase (WCL) was produced by Burkholderia sp. ZYB002 with broad spectrum organic solvent tolerance. The production medium of the WCL was primarily optimized, which resulted in the maximum activity of 22.8 U/mL and the 5.1-fold increase of the WCL yield. The optimized culture medium was as follows (% w/v or v/v): soybean meal 2, soybean oil 0.5, manganese sulfate 0.1, K₂HPO₄ 0.1, olive oil 0.5, initial pH 6.0, inoculum density 2, liquid volume 35 mL in 250-mL Erlenmeyer flask, and incubation time 24 h. The biochemical characterization of the WCL from Burkholderia sp. ZYB002 was determined, and the results showed that the optimal pH and temperature for lipolytic activity of the WCL was 8.0 and 65°C, respectively. The WCL was stable at temperature up to 70°C for 1 h and retained 79.2% of its original activity. The WCL was highly stable in the pH range from 3.0 to 8.5 for 6 h. Ca²⁺, K⁺, Na⁺, NO₃⁻, etc. ions stimulated its lipolytic activity, whereas Zn²⁺ ion caused inhibition effect. The WCL was also relatively stable in n-butanol at a final concentration of 50% (v/v) for 24 h. However, the WCL was strongly inhibited in Triton X-100 at a final concentration of 10% (v/v). The WCL with thermal resistance and organic solvent tolerance showed its great potential in various green industrial chemical processes.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

Purification, characterization, kinetic properties, and thermal behavior of extracellular polygalacturonase produced by filamentous fungus Tetracoccosporium sp

For the first time, a polygalacturonase from the culture broth of Tetracoccosporium sp. was isolated and incubated at 30°C in an orbital shaker at 160 rpm for 48h. The enzyme was purified by ammonium sulfate precipitation and two-step ion-exchange chromatography and had an apparent molecular mass of 36 kDa, as shown by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. Its optimum activity was at pH 4.3 and 40°C, and the K _m and V _max values of this enzyme (for polygalacturonic acid) were 3.23 mg/mL and 0.15 μmol/min, respectively. Ag⁺, Co²⁺, EDTA, Tween-20, Tween-80, and Triton X-100 stimulated polygalacturonase activity whereas Al³⁺, Ba²⁺, Ca²⁺, Fe²⁺, Fe³⁺, Ni²⁺, Mg²⁺, Mn²⁺, and SDS inhibited it. In addition, iodoacetamide and iodoacetic acid did not inhibit enzyme activity at a concentration of 1 mM, indicating that cysteine residues are not part of the catalytic site of polygalacturonase. We studied the kinetic properties and thermal inactivation of polygalacturonase. This enzyme exhibited a t _1/2 of 63 min at 60°C and its specific activity, turnover number, and catalytic efficiency were 6.17 U/mg, 113.64 min⁻¹, and 35.18 mL/(min·mg), respectively. The activation energy (ΔE ^#) for heat inactivation was 5.341 kJ/mol, and the thermodynamic activation parameters ΔG ^#, ΔH ^#, and ΔS ^# were also calculated, revealing a potential application for the industry.     

Purification and Biochemical Characterization of Polyphenol Oxidases from Embryogenic and Nonembryogenic Cotton (<Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.) Cells

Polyphenol oxidases (PPOs) were isolated from cell suspensions of two cultivars of cotton (Gossypium hirsutum L.), and their biochemical characteristics were studied. PPO from Coker 312, an embryogenic cultivar, showed a highest affinity to catechol 20 mM, and PPO from R405-2000, a nonembryogenic cultivar, showed a highest affinity to 4-methylcatechol 20 mM. The optimal pH for PPO activity was 7.0 and 6.0 for Coker 312 and R405-2000, respectively. The enzyme had an optimal temperature of 25 °C and was relatively stable at 20–30 °C. Reducing sodium metabisulfite, ascorbic acid, dithiothreitol, SnCl₂, and FeCl₃ markedly inhibited PPO activity, whereas its activity was highly enhanced by Mg²⁺, Ca²⁺, and Mn²⁺ and was moderately inhibited by Ba²⁺, Cu²⁺, and Zn²⁺. The analysis revealed a single band on the sodium dodecyl sulfate polyacrylamide gel electrophoresis which corresponded to a molecular weight of 55 kDa for Coker 312 and 42 kDa for R405-2000.     

Purification and Properties of a Psychrotrophic <Emphasis Type="Italic">Trichoderma</Emphasis> sp. Xylanase and its Gene Sequence

A psychrotrophic fungus identified as Trichoderma sp. SC9 produced 36.7 U/ml of xylanase when grown on a medium containing corncob xylan at 20 °C for 6 days. The xylanase was purified 37-fold with a recovery yield of 8.2%. The purified xylanase appeared as a single protein band on SDS-PAGE with a molecular mass of approximately 20.5 kDa. The enzyme had an optimal pH of 6.0, and was stable over pH 3.5–9.0. The optimal temperature of the xylanase was 42.5 °C and it was stable up to 35 °C at pH 6.0 for 30 min. The xylanase was thermolabile with a half-life of 23.9 min at 45 °C. The apparent K _m values of the xylanase for birchwood, beechwood, and oat-spelt xylans were found to be 3, 2.1, and 16 mg/ml respectively. The xylanase hydrolyzed beechwood xylan and birchwood xylan to yield mainly xylobiose as end products. The enzyme-hydrolysed xylotriose, xylotetraose, and xylopentose to produce xylobiose, but it hardly hydrolysed xylobiose. A xylanase gene (xynA) with an open reading frame of 669 nucleotide base pairs (bp), encoding 222 amino acids, from the strain was cloned and sequenced. The deduced amino acid sequence of XynA showed 85% homology with Xyn2 from a mesophilic strain of Trichoderma viride.     

Purification and Characterization of Cell Suspensions Peroxidase from Cotton (<Emphasis Type="Italic">Gossypium hirsutum</Emphasis> L.)

Two peroxidases, cPOD-I and rPOD-II, have been isolated and purified from cotton cell suspension and their biochemical characteristics studied. rPOD-II from R405-2000, a non-embryogenic cultivar, has higher activity than cPOD-I derived from Coker 312, which developed an embryogenic structure. The cPOD-I and rPOD-II had molecular mass of 39.1 and 64 kDa respectively, as determined by SDS-PAGE. Both enzymes showed high efficiency of interaction with the guaiacol at 25 mM. The optimal pH for cPOD-I and rPOD-II activity was 5.0 and 6.0, respectively. The enzyme had an optimum temperature of 25 °C and was relatively stable at 20–30 °C. The isoenzymes were highly inhibited by ascorbic acid, dithiothreitol, sodium metabisulfite, and β-mercaptoethanol. Their activities were highly enhanced by Al³⁺, Fe³⁺, Ca²⁺, and Ni²⁺, but they were moderately inhibited by Mn²⁺ and K⁺. The enzyme lost 50% to 62% of its activity in the presence of Zn²⁺ and Hg²⁺.     

New Thermostable Amylase from <Emphasis Type="Italic">Bacillus cohnii</Emphasis> US147 with a Broad pH Applicability

A new thermophilic bacterial strain identified as Bacillus cohnii US147 was isolated from the southern Tunisian soil. The identification was based on physiological tests and molecular techniques related to the 16S ribosomal ribonucleic acid. The isolated strain produced amylase, which was purified. This amylase had an apparent molecular mass of 30 kDa as estimated by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. Amylase US147 showed K _m and V _max values of 0.7 mg/ml and 2.2 U/ml, respectively, with starch as the substrate. The enzyme was active in acid and basic pH and had a maximal activity on starch at pH 9 and 70 °C. The enzyme was stable at pH 9 for 72 h and retained half of its activity after incubation at 70 °C for 150 min. A partially inhibition (15%, 25%, 23%, 20%, and 22%) was obtained with 1 mM SDS, 1 mM NaBO₃, 1 mM H₂O_2, 1 mM Zn⁺², and 5 mM ethylenediamine tetraacetic acid (EDTA), respectively. The amylase recovered its original activity by the addition of 10 mM Ca ²⁺ to the 5 mM EDTA. These properties indicated a possible use of this amylase in starch saccharification, in detergent, and in other industrial applications.     

Improvement of <Emphasis Type="Italic">Aspergillus sulphureus</Emphasis> Endo-β-1,4-Xylanase Expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by Codon Optimization and Analysis of the Enzymic Characterization

The gene xynB from Aspergillus sulphureus encoding the endo-β-1,4-xylanase was de novo synthesized by splicing overlap extension polymerase chain reaction according to Pichia pastoris protein’s codon bias. The synthetic DNA and wild-type DNA were placed under the control of a glyceraldehyde-3-phosphate dehydrogenase gene promoter (GAP) in the constitutive expression vector plasmid pGAPzαA and electrotransformed into the P. pastoris X-33 strain, respectively. The transformants screened by Zeocin were able to constitutively secrete the xylanase in YPD liquid medium. The maximum yield of the recombinant xylanase produced by the synthetic DNA was 105 U ml⁻¹, which was about 5-fold higher than that by wild-type DNA under the flask culture at 28 °C for 3 days. The enzyme showed optimal activity at 50 °C and pH 5.0. The residual activity remained above 90% after the recombinant xylanase was pretreated in Na₂HPO₄–citric acid buffer (pH 2.4) for 2 h. The xylanase activity was significantly improved by Zn²⁺. These biochemical characteristics suggest that the recombinant xylanase has a prospective application in feed industry as an additive.     

Synthesis,complexation, and <Emphasis Type="Italic">E—Z</Emphasis> photoisomerization of azadithiacrown-containing styryl dyes as new optical sensors for mercury cations

New styryl dyes containing azadithia-15-crown-5 fragments were synthesized. The complexation of these compounds with Ag⁺, Pb²⁺, Cu²⁺, Hg²⁺, and H⁺ cations was studied by ¹H NMR spectroscopy, steady-state, and time-resolved spectroscopy. The stability constants of the complexes were calculated from the spectrophotometric titration data. The photophysical properties and E—Z photoisomerization of styryl dyes and their complexes with mercury and copper(II) cations in acetonitrile were examined. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 495–507, March, 2007. Centre de Physique Moléculaire Optique et Hertzienne-UMR CNRS 5798, Bordeaux University I, 351 Cours de la Libération, 33405 Talence, France.     

Removal of <Superscript>60</Superscript>Co<Superscript>2+</Superscript> and <Superscript>137</Superscript>Cs<Superscript>+</Superscript> ions from low radioactive solutions using <Emphasis Type="Italic">Azolla caroliniana</Emphasis> willd. water fern

This study concerns the removal of the ¹³⁷Cs⁺ and ⁶⁰Co²⁺ β+γ-radioactive ions in Azolla caroliniana Willd. water fern. The living fern and two different types of biosorbent prepared from Azolla caroliniana were tested to remove the above-mentioned radioactive ions from dilute solutions, in the absence and in the presence of the ionic competition. Effective ¹³⁷Cs⁺ and ⁶⁰Co²⁺ ions removal from low radioactive wastewaters was demonstrated. The time dependent K _d (t) values were calculated from the absorption data. These results indicate that removal process achieved equilibrium in about 120 min and that it involves two steps: rapid and slow absorption; the active process (metabolic bioaccumulation on the living fern) was responsible for above one half of the total removal process. A thin layer radiochromatography study leads to the conclusion that the biochemical components in which ¹³⁷Cs⁺ and ⁶⁰Co²⁺ place themselves are of a polysaccharide and lipoid fractions.     

Three Alginate Lyases from Marine Bacterium <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> HZJ216: Purification and Characterization

Three alginate lyases (A, B, and C) from an alginate-degrading marine bacterium strain HZJ216 isolated from brown seaweed in the Yellow Sea of China and identified preliminarily as Pseudomonas fluorescens are purified, and their biochemical properties are described. Molecular masses of the three enzymes are determined by SDS-PAGE to be 60.25, 36, and 23 kDa with isoelectric points of 4, 4.36, and 4.59, respectively. Investigations of these enzymes at different pH and temperatures show that they are most active at pH 7.0 and 35 °C. Alginate lyases A and B are stable in the pH range of 5.0–9.0, while alginate lyase C is stable in the pH range of 5.0–7.0. Among the metal ions tested, additions of Na⁺, K⁺, and Mg²⁺ ions can enhance the enzyme activities while Fe²⁺, Fe³⁺, Ba²⁺, and Zn²⁺ ions show inhibitory effects. The substrate specificity results demonstrate that alginate lyase C has the specificity for G block while alginate lyases A and B have the activities for both M and G blocks. It is the first report about extracellular alginate lyases with high alginate-degrading activity from P. fluorescens.