Behaviour of nucleotides and oligonucleotides in potentiometric HPLC detection

Potentiometric HPLC detection was studied of mononucleotides (UMP, AMP, UDP, ADP, CTP, UTP, GTP, ATP) and oligonucleotides (a synthetic mixture d(T)_12–18 5′OH, a mixed 21-mer, 33-mer, and 60-mer). Coated-wire electrodes were used. The coatings were of the liquid membrane type containing PVC, DOS and synthetic macrocyclic amine- and podand ureum receptors. Electrodes based on these receptors gave very sensitive responses to triphosphate nucleotides and to oligonucleotides. The molar response of the oligonucleotides was related to their molar mass. The HPLC system consisted of a reversed phase column eluted with a phosphate buffer, triethylammoniumacetate (TEAA), and an acetonitrile gradient. The sensitive potentiometric response of these highly charged ions is discussed.     

The analysis of major impurities of lipophilic-conjugated phosphorothioate oligonucleotides by ion-pair reversed-phase HPLC combined with MALDI-TOF-MS

A simple and rapid ion-pair reversed phase high-performance liquid chromatography (IP-RP-HPLC) method was developed to analyse the major impurities of lipophilic-conjugated phosphorothioate oligonucleotides (ODNs), which provided better separation performance than capillary gel electrophoresis and ion exchange chromatograph methods. The study showed that covalent conjugations of lipophilic group (docosanyl, C₂₂) to ODN at 5′-termini (denoted as 5′C₂₂-Flu) or 3′-termini (denoted as 3′C₂₂-Flu) exhibited similar chromatographic retention behavior. Some important analytical conditions of IP-RP-HPLC, including column type, ion-pairing buffer composition, and separation temperature, were investigated for the effects on the separation of crude 5′C₂₂-Flu. As expected, the method developed was successfully applied to the analysis of crude 3′C₂₂-Flu and both purified products. Furthermore, the related impurities derived from the synthetic process were identified by matrix-assisted laser desorption-ionization time-of-flight mass spectrum. These MS results are of benefit to understanding the major process-related impurities in lipophilic-ODN conjugates synthesis, thereby elevating the quality of target products.     

Cooperative hybridization of oligonucleotides

Nucleic acids have been demonstrated to be versatile nanoscale engineering materials with the construction of dynamic DNA structures, motors, and circuits. These constructions generally rely on the clever use and integration of relatively few reaction mechanisms and design primitives. Here, cooperative hybridization is introduced as a mechanism in which two oligonucleotides of independent sequence can stoichiometrically, simultaneously, and cooperatively hybridize to a DNA complex. Cooperative hybridization is rigorously characterized and modeled and is shown to implement digital concentration comparison with amplification, as well as digital Boolean logic. These designs, based on cooperative hybridization, excel in being robust to impurities and not requiring oligonucleotide purification.     

Synthesis of aminoglycoside-modified oligonucleotides

[structure: see text] To study the structural requirements of aminoglycoside binding to nucleic acids, compound 1-an analogue of the naturally occurring nucleoside J-was synthesized. When incorporated into oligodeoxynucleotides, 1 leads to thermal stabilization of the resulting duplexes. The increase in pairing affinity is stronger with complementary RNA than with DNA.     

Stepwise synthesis of oligonucleotides

Russian Chemical Bulletin -     

Solid-phase enzymatic synthesis of oligonucleotides

[formula: see text] The controlled and selective synthesis of oligonucleotides on the solid phase is possible under mild aqueous conditions using the enzyme T4 RNA ligase, the resins being tentagel or kieselguhr/polydimethylacrylamide.     

Diels--Alder bioconjugation of diene-modified oligonucleotides

In an effort to offer complementary technology for covalent biomolecule modification (bioconjugation), we have developed a method that exploits the aqueous acceleration of Diels--Alder reactions for this purpose. Three different diene phosphoramidite reagents have been synthesized that enable diene modification of synthetic oligonucleotides prepared by the phosphoramidite method. Clean and efficient Diels--Alder cycloaddition of these diene oligonucleotides with maleimide dieneophiles was carried out, and the labeled oligonucleotide bioconjugates were characterized by HPLC and electrospray mass spectrometry. Dieneophile stoichiometry, temperature, and pH are all parameters that were shown to influence the efficiency of the process.     

Fluorous affinity purification of oligonucleotides

[structure: see text] Nucleoside phosphoramidites bearing a fluorous dimethoxytrityl (FDMT) group were used to synthesize fluorous-tagged oligonucleotides, which were subjected to solid-phase extraction using a pH-stable fluorinated adsorbent. On-column detritylation afforded the purified oligonucleotides. The fluorous affinity purification method offers one-pass loading without ammonia removal, high selectivity for the removal of failure sequences, high recoveries (typically 70-100%), and the ability to purify long oligonucleotides (e.g., 50-100-mers).     

Surface attachment of nanoparticles using oligonucleotides

Colloidal polymer particles are widely used in a variety of applications ranging from chromatography to surface modified bioreactors in protein arrays. In the present study, surface attachment of polystyrene particles to a polystyrene substrate has been performed using oligonucleotide hybridization. Thiolated complementary oligomers of cytosine and guanine have been covalently coupled to a pyridyl disulphide (PDS) modified polyethyleneglycol tether, forming part of a triblock copolymer which is adsorbed to the polystyrene surfaces via hydrophobic polypropylene oxide center blocks. The ability to withstand shear forces was studied using a laminar flow cell and the uptake of oligomers on the particles was quantified using two complementary techniques: UV-spectroscopy and sedimentation field flow fractionation. The possibility to tether particles in a flow cell suitable for practical use in e.g. a FIA-system is demonstrated.     

Automated synthesis of 3'-metalated oligonucleotides

We report the first synthesis of a metallonucleoside bound to a solid support and subsequent oligonucleotide synthesis with this precursor. Large-scale syntheses of metal-containing oligonucleotides are achieved using a solid support modified with [Ru(bpy)(2)(impy')](2+) (bpy is 2,2'-bipyridine; impy' is 2'-iminomethylpyridyl-2'-deoxyuridine). A duplex formed with the metal-containing oligonucleotide exhibits superior thermal stability when compared to the corresponding unmetalated duplex (T(m) = 50 degrees C vs T(m) = 48 degrees C). Electrochemical (E(1/2) = 1.3 V vs NHE), absorption (lambda(max) = 480 nm), and emission (lambda(max) = 720 nm, tau = 44 ns, Phi = 0.11 x 10(-)(3)) data for the ruthenium-modified oligonucleotides indicate that the presence of the oligonucleotide does not perturb the electronic properties of the ruthenium complex. The absence of any change in the emission properties upon duplex formation suggests that the [Ru(bpy)(2)(impy)](2+) chromophore will be a valuable probe for DNA-mediated electron-transfer studies. Despite the relatively high Ru(III/II) reduction potential, oxidative quenching of photoexcited [Ru(bpy)(2)(impy)](2+) does not lead to oxidative damage of guanine or other DNA bases.     

Spectroscopic quantification of covalently immobilized oligonucleotides

Quantitative determination of surface coverage, film thickness and molecular orientation of DNA oligomers covalently attached to aminosilane self‐assembled monolayers has been obtained using complementary infrared and photoelectron studies. Spectral variations between surface immobilized oligomers of the different nucleic acids are reported for the first time. Carbodiimide condensation was used for covalent attachment of phosphorylated oligonucleotides to silanized aluminum substrates. Fourier transform infrared (FTIR) spectroscopy and x‐ray photoelectron spectroscopy (XPS) were used to characterize the surfaces after each modification step. Infrared reflection–absorption spectroscopy of covalently bound DNA provides orientational information. Surface density and layer thickness are extracted from XPS data. The surface density of immobilized DNA, 2–3 (×10¹³) molecules cm^?2, was found to depend on base composition. Comparison of antisymmetric to symmetric phosphate stretching band intensities in reflection–absorption spectra of immobilized DNA and transmission FTIR spectra of DNA in KBr pellet indicates that the sugar–phosphate backbone is predominantly oriented with the sugar–phosphate backbone lying parallel to the surface, in agreement with the 10–20 Å DNA film thickness derived from XPS intensities. Copyright © 2004 John Wiley & Sons, Ltd.     

Controlled density patterning of tolylterpyridine-tagged oligonucleotides

An efficient surface anchoring strategy of tolylterpyridine-tagged DNA single strands (ssDNA-ttpy) synthesized on gold electrodes is reported. The method is based on exchange reactions between Fe(II)bis-terpyridine complexed SAMs and ssDNA-ttpy, and allows efficient hybrydization of the cDNA strands. Moreover, by using low-current focused ion beam lithography, micropatterned arrays are obtained, homogeneously covered with ssDNA-ttpy. The surface adsorption kinetics of ssDNA-ttpy, as well as its hybridization efficiency, was monitored by in situ quartz crystal microbalance with dissipation monitoring (QCM-D) technique. The effective confinement of the ssDNA-ttpy at the micrometer level has been monitored by time of flight secondary ion mass spectrometry (ToF-SIMS) and ellipsometric surface imaging experiments, providing laterally resolved chemical and topographic mapping.     

Synthesis of TMG-capped RNA-DNA chimeric oligonucleotides

This paper deals with the synthesis of m₃^2,2,7G^5′pppAmpUmpApd(CpTpTpApCpCpT), a 5′-TMG-capped RNA-DNA chimeric oligonucleotide, which is expected to be conveyed to the nucleus by snurportin 1, a nuclear-transport protein. This 5′-TMG-capped RNA-DNA chimeric molecule was synthesized by the enzymatic condensation of m₃^2,2,7G^5′pppAmpUmpA with A^5′ppd(CpTpTpApCpCpT) in the presence of RNA ligase. An inherent serious side reaction was disclosed in the 5′-adenylation of d(CpTpTpApCpCpT) on the solid support, but the use of an active ester intermediate as the pA donor gave an improved result.     

Radiolabeled oligonucleotides for antisense imaging

Oligonucleotides radiolabeled with isotopes emitting γ-rays (for SPECT imaging) or positrons (for PET imaging) can be useful for targeting messenger RNA (mRNA) thereby serving as non-invasive imaging tools for detection of gene expression in vivo (antisense imaging). Radiolabeled oligonucleotides may also be used for monitoring their in vivo fate, thereby helping us better understand the barriers to its delivery for antisense targeting. These developments have led to a new area of molecular imaging and targeting, utilizing radiolabeled antisense oligonucleotides. However, the success of antisense imaging relies heavily on overcoming the barriers for its targeted delivery in vivo. Furthermore, the low ability of the radiolabeled antisense oligonucleotide to subsequently internalize into the cell and hybridize with its target mRNA poses additional challenges in realizing its potentials. This review covers the advances in the antisense imaging probe development for PET and SPECT, with an emphasis on radiolabeling strategies, stability, delivery and in vivo targeting.     

2'-modified-2-thiothymidine oligonucleotides

[reaction: see text] Oligonucleotides with novel modifications, 2'-O-[2-(methoxy)ethyl]-2-thiothymidine and 2'-deoxy-2'-fluoro-2-thiothymidine, have been synthesized. These modified oligonucleotides exhibited very high thermal stability when hybridized with complementary RNA. 2-O-(2-Methoxy)ethyl-2-thiothymidine modified oligonucleotide phosphodiesters showed enhanced resistance toward nucleases (t(1/2) > 24 h), but 2'-deoxy-2'-fluoro-2-thiothymidine modified oligonucleotide phosphodiesters showed limited stability to nucleotytic degradation.