Preparation of monoalkylpiperidines via the mild hydrogenation of monoalkynylpyridines

Monoalkynylpyridines were prepared via a Sonogashira cross-coupling reaction between monoiodopyridines and alkynes. Mild hydrogenation of the obtained monoalkynylpyridines was then conducted to produce the corresponding monoalkylpiperidines in moderate to excellent yields. The hydrogenation reaction was carried out under H₂ (1 atm) in the presence of 10 wt% Pd/C (5 eq) in either AcOH or MeOH at room temperature. The present mild method is therefore useful for the quick and easy preparation of monoalkylpiperidines.     

Sulfonate group modified Ni catalyst for highly efficient liquid-phase selective hydrogenation of bio-derived furfural

A simple and highly efficient Ni catalyst was synthesized and showed excellent catalytic performance for selectively liquid-phase hydrogenation of furfural to furfuryl alcohol or tetrahydrofurfuryl alcohol.     

RuCl3 anchored onto post-synthetic modification MIL-101(Cr)-NH2 as heterogeneous catalyst for hydrogenation of CO2 to formic acid

A series of efficient ruthenium chloride (RuCl_3)-anchored MOF catalysts,such as RuCl_3@MIL-101 (Cr)-Sal,and RuCl_3@MIL-101 (Cr)-DPPB, have been successfully synthesized by post-synthetic modification (PSM)of the terminal amino of MIL-101(Cr)-NH_2 with salicylaldehyde, 2-diphenylphosphinobenzaldehyde (DPPBde) and anchoring of Ru (Ⅲ) ions. The stronger coordination electron donor interaction between Ru (Ⅲ) ions and chelating groups in the RuCl_3@MIL-101 (Cr)-DPPB enhances its catalytic performance for CO_2 hydrogenation to formic acid. The turnover number (TON) of formic acid was up to 831 in reaction time of 2 h with dimethyl sulfoxide (DMSO) and water (H_2O) as mixed solvent, trimethylamine (Et_3N) as organic base, and PPh_3 as electronic additive.     

High efficient iron-catalyzed transfer hydrogenation of quinolines with Hantzsch ester as hydrogen source under mild conditions

A highly efficient transfer hydrogenation of quinolines with Hantzsch ester as hydrogen source in the presence of 1 mol% Fe(OTf)₂ under mild conditions has been developed. A series of substituted 1,2,3,4-tetrahydroquinoline derivatives were afforded in excellent yields with good functional group tolerance.     

Preparation and properties of zirconia nanotube-supported 12-tungstophosphoric acid catalyst

Zirconia nanotube-supported H₃PW₁₂O₄0 (HPW) catalysts exhibit high catalytic activities in the synthesis of fatty acid ethyl ester.     

Synthesis,characterization and anti-bacterial activity of divalent transition metal complexes of hydrazine and trimesic acid

Transition metal complexes of trimesic acid and hydrazine mixed-ligands with a general formula M(Htma)(N₂H₄)₂, where, M = Mn, Co, Ni, Cu and Zn; H₃tma = trimesic acid, have been prepared and characterized by elemental, structural, spectral and thermal analyses. For the complexes, the carboxylate ν_asym and ν_sym stretchings are observed at about 1626 and 1367 cm^?1 respectively, with Δν between them of ～260 cm^?1, showing the unidentate coordination of each carboxylate group. The hydrazine moieties are present as bridging bidentates. Electronic and EPR spectral studies suggest an octahedral geometry for the complexes. All these complexes show three steps of decomposition in TGA/DTA. SEM images of CuO and MnO residues obtained from the complexes show nano-sized clusters suggesting that the complexes may be used as precursors for nano-CuO and nano-MnO preparation. The antimicrobial activities of the prepared complexes, against four bacteria have been evaluated.     

A facile preparation of carbon-supported Pd nanoparticles for electrocatalytic oxidation of formic acid

A low temperature approach via the complexing of PdCl₂ with EDTA followed by NaBH₄ reduction has been used to prepare Vulcan XC-72 carbon-supported Pd nanoparticles (Pd/C). The mean particle size of the Pd/C catalysts is found to increase from 3.3 to 9.2 nm with heat-treated temperature. TEM images demonstrated that the Pd nanoparticles are well dispersed on the support with a relatively narrow particle size distribution. A correlation between the electrocatalytic activity of formic acid oxidation and particle size of the Pd/C catalysts indicates that the highest activity of formic acid oxidation is found with a Pd mean particle size of ca. 4.7 nm. The preparation method used here is cost-effective and should be easily scaled for industrial production.     

Synthesis,structure and properties of N-aminosaccharin – A selective inhibitor of human carbonic anhydrase I

Previously unknown N-aminosaccharin was prepared in good yield via the one-step direct amination of saccharin sodium salt with hydroxylamine-O-mesitylenesulfonic acid (MSH) and its reactivity investigated. N-aminosaccharin and its derivatives were tested against hCA isoforms and the parent compound was identified to be a selective, low micromolar inhibitor (K_i = 8.8 μM) of hCA I. These findings provide a ligand-efficient starting point for the design of potent hCA I inhibitors – a promising drug target for retinal/cerebral edema treatment.     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

Nickel-catalyzed decarboxylative coupling of an alkynyl carboxylic acid with aryl iodides

A decarboxylative coupling reaction with an alkynyl carboxylic acid and aryl iodides in the presence of a nickel catalyst was developed. When the reaction was conducted with NiCl₂ (10 mol%), Xantphos (15 mol%), Mn (1.0 equiv), and Cs₂CO₃ (1.5 equiv), the desired diaryl alkynes were formed in moderated to good yields. Furthermore, this method does not produce the diyne, which is formed in the homocoupling of alkynyl carboxylic acids.     

Synthesis of MXene-supported layered MoS2 with enhanced electrochemical performance for Mg batteries

In this paper, the petal-like MoS₂/MXene composite has been successfully synthesized by one-step hydrothermal method. With the combination of few-layer MoS₂ nanosheets and the high conductive MXene substrate, the composite exhibits enhanced capacities and rate performance as cathode material of Mg batteries.     

A rapid and sensitive UPLC–MS/MS method for quantitative determination of arformoterol in rat plasma,lung and trachea tissues

A rapid and sensitive ultra-performance liquid chromatography-tandem mass spectrometry (UPLC–MS/MS) method was developed and fully validated for determination of arformoterol in rat plasma, lung and trachea tissues.     

Systematic trends in (0 0 1) surface ab initio calculations of ABO3 perovskites

By means of the hybrid exchange–correlation functionals, as it is implemented in the CRYSTAL computer code, ab initio calculations for main ABO₃ perovskite (0 0 1) surfaces, namely SrTiO₃, BaTiO₃, PbTiO₃, CaTiO₃, SrZrO₃, BaZrO₃, PbZrO₃ and CaZrO₃, were performed. For ABO₃ perovskite (0 0 1) surfaces, with a few exceptions, all atoms of the upper surface layer relax inward, all atoms of the second surface layer relax outward, and all third layer atoms, again, inward. The relaxation of (0 0 1) surface metal atoms for ABO₃ perovskite upper two surface layers for both AO and BO₂-terminations, in most cases, are considerably larger than that of oxygen atoms, what leads to a considerable rumpling of the outermost plane. The ABO₃ perovskite (0 0 1) surface energies always are smaller than the (0 1 1) and especially (1 1 1) surface energies. The ABO₃ perovskite AO and BO₂-terminated (0 0 1) surface band gaps always are reduced with respect to the bulk values. The B–O chemical bond population in ABO₃ perovskite bulk always are smaller than near the (0 0 1) and especially (0 1 1) surfaces.     

Improved activity of SnO for the photocatalytic oxygen evolution

SnO prepared by soft chemistry exhibits a black color and semiconducting properties. The X-ray diffraction indicates a tetragonal symmetry (SG: P4/nmm) with nano crystallites of an average size of 85 nm. The forbidden band, determined from the diffuse reflectance is found to be 1.46 eV. The electrical conductivity occurs by polaron hopping and follows an Arrhenius type law with activation energy of 0.21 eV, the change in the slope at 526 K is attributed to the oxidation to SnO₂. The photo-electrochemical study shows n type conduction with a flat band potential of ?0.45 V, close to the photocurrent onset potential (?0.40 V). The electrochemical impedance spectroscopy shows the bulk contribution of SnO (R_b = 1.7 kΩ cm²) and decreases down to 1.89 kΩ cm² under illumination. The photocatalytic properties have been evaluated for the first time for to the oxygen evolution. The valence band, deriving from Sn²⁺: 5p orbital with a potential (?0.80 V_SCE/5.55 eV), is suitably positioned with respect to O₂/H₂O level (～0.6 V_SCE), leading to water oxidation under visible light. The best performance occurs at pH ～ 7 with an oxygen liberation rate of 23 µmol mL h^?1 (mg catalyst)^?1 and a quantum efficiency of 1.2%. An improvement of ～13% is observed on the system SnO/clay.     

A new method of one-pot synthesis of dicarboxylic acid derivatives and diketones containing quaternary carbon atom and remote functional groups from linear acyl halides

The one-pot, regioselective synthesis of branched diacid derivatives – diesters, dithioesters, diamides [YC(O)O(CH₂)_mC(Me)₂OC(O)Y] and diketones of aromatic and heteroaromatic series, [ArCO(CH₂)_mC(Me)₂C(O)Ar,) from available linear acyl halides, C_nH_2 n+1COCl (n = 7–9), CO (1 at) and various nucleophiles (YH = EtOH, CF₃CH₂OH, H(CF₂)₂CH₂OH, thiophene, anisole, Et₂NH, aniline, and morpholine) in the presence of the superelectrophilic complex, CBr₄·2AlBr₃ has been performed for the first time. This method provides access to new and promising groups of dicarboxylic acid derivatives and diketones containing quaternary carbon atom and remote functional groups.     

New all-cis-tetra(p-tolyl)cyclotetrasiloxanetetraol and its functionalization

New all-cis-tetra(p-tolyl)cyclotetrasiloxanetetraol and its derivatives with Si(CH = CH₂)Me and Si(H)Me₂ groups have been prepared and characterized by IR and NMR spectroscopy, GPC, mass spectrometry, TGA and DSC. Molecular and crystalline structures of the tetraol and its derivative with four Si(CH = CH₂)Me groups have been determined by single-crystal X-ray diffraction.     

Controlled deposition of Pt on Au nanorods and their catalytic activity towards formic acid oxidation

Platinum submonolayer decorated gold nanorods with controlled coverage were prepared by the addition of Au nanorods into the growth solution of Pt in the presence of NH₂OH · HCl as the growth agent. The properties of Au nanorods decorated by Pt submonolayer were investigated by various techniques including transimission electron microscopy, X-ray diffraction, and electrochemical methods. The Pt decorated Au nanorods on carbon black showed significantly higher activity on formic acid electrooxidation than the conventional Pt/C catalysts. They showed different reaction path of formic acid electrooxidation by suppressing the formation of poisoning intermediate CO.     

Photocatalytic hydrogen production from acidic aqueous solution in BODIPY-cobaloxime-ascorbic acid homogeneous system

For the first time, iodinated BODIPY dyes with phenylamine or 8-hydroxylquinoline moiety at the meso-position on the BODIPY core were tested for the light-driven production of H₂ from the acidic aqueous solutions.     

Facile synthesized Cu-SnO2 anode materials with three-dimensional metal cluster conducting architecture for high performance lithium-ion batteries

A novel Cu-SnO₂ anode material derived from Cu₆Sn₅ alloy, retaining high conductivity of Cu and high theoretical capacity of SnO₂ with a facile synthesizing process by oxidation and reduction method. The novel Cu structure penetrates in the composite particles inducing high conductivity and spaceconfined SnO₂, which restrict the pulverization of SnO₂ during lithiation/delithiation process.     

A Eu/Gd-mixed metal-organic framework for ultrasensitive physiological temperature sensing

A stable and biocompatible MOF-based thermometer utilizing back energy transfer has been developed, which exhibits ultrasensitive temperature sensing performance in the physiological temperature range.