Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

Quinoline-based highly selective and sensitive fluorescent probe specific for Cd2+ detection in mixed aqueous media

Quinoline-based fluorescent probe as a recognition unit was designed and synthesized in this study. The probe R1 displayed excellent selectivity and sensitivity for cadmium ions (Cd²⁺) over a wide range of metal ions in acetonitrile-water (MeCN-H₂O) mixed solution. In order to better understand the recognition mechanism between probe and Cd²⁺, the density functional theory calculations were performed. Finally, the colorimetric experiment result was observed and conveniently monitored by the naked eye, and a visual detection limit of 4 × 10^?6 mol L^?1 was achieved. These experimental results indicated the promising potential of the probe to detect Cd²⁺ in biological system. Furthermore, the probe R1 was successfully used for the highly sensitive detection of Cd²⁺ in living cells.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

A borondipyrrolemethene-based turn-on fluorescent probe for silver ion with high sensitivity and selectivity and its application in water samples and living cells

A borondipyrrolemethene-based compound (1) is synthesized and used as a “turn-on” fluorescent probe for silver ions (Ag⁺). The probe displays highly sensitive fluorescence response toward Ag⁺ with a 40-fold fluorescence enhancement when 60 μM of Ag⁺ is added. The fluorescence intensity of the probe is linearly dependent on Ag⁺ concentration ranging from 0.05 to 60 μM. And the detection limit (LOD) can reach 0.02 μM, which complies with the standard of World Health Organization (WHO) for drinking water (0.9 μM). Moreover, the probe shows remarkable selectivity for Ag⁺ over other metal ions. Furthermore, the response behavior of 1 toward Ag⁺ is pH independent in the neutral range from 6.0 to 8.0. The response of 1 toward Ag⁺ is fast (response time is less than 2 min) and reversible chemically. What’s more, the sensing mechanism of probe 1 toward Ag⁺ is verified by mass spectra (MS) and density functional theory (DFT) calculations. In particular, the probe is applied for detection of Ag⁺ in water samples and living cells successfully.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Cu2+-selective turn-on fluorescence signaling based on metal-induced hydrolysis of pyrenecarbohydrazide

We developed a simple Cu²⁺-selective turn-on fluorescence signaling probe based on the hydrolysis of 1-pyrenecarbohydrazide (1) to 1-pyrenecarboxylic acid. Probe 1 exhibited prominent fluorescence signaling of Cu²⁺ ions in a 10% aqueous Tris-buffered (pH 7.0) DMSO solution with a detection limit of 5.93 × 10^?8 M. Signaling with control compounds derived from pyreneacetic acid and pyrenebutyric acid showed that the fluorescence signal became less pronounced as the distance between the hydrazide functionality and the pyrene fluorophore increased. As a practical application, this probe was employed for the determination of Cu²⁺ in a simulated semiconductor wastewater.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

Design and synthesis of novel rhodamine-based chemodosimeters derived from [2.2]paracyclophane and their application in detection of Hg2+ion

For a better insight into the spectroscopic properties of [2.2]paracyclophane in fluorescent probes, a novel rhodamine-based chemodosimeter bearing [2.2]paracyclophane 4a has been designed and synthesized. The probe 4a exhibits a highly selective and sensitive response to Hg²⁺ over other transition metal ions in aqueous solution. Its detection limit is determined to be 77 nM. The significant changes in the fluorescence color could be used for the naked-eye detection. Furthermore, the probe 4a shows good membrane permeability and can be applied to detect intracellular Hg²⁺ in human lung adenocarcinoma cells (A549 cells). The crystal structure and spectral properties of its congener 4b that contains one 12-bromo [2.2]paracyclophane group and rhodamine moiety are also investigated for a comparison.     

A lysosomal targeting fluorescent probe and its zinc imaging in SH-SY5Y human neuroblastoma cells

A fluorescent probe based PET mechanism was designed, and the probe could image endogenous release of Zn²⁺ upon H₂O₂ stimulation in SH-SY5Y cells.     

Fused bis[2-(2′-hydroxyphenyl)benzoxazole] derivatives for improved fluoride sensing: The impact of regiochemistry and competitive hydrogen bonding

Development of fluorescent chemical sensors for fluoride is important due to increased use of fluoride in environment. A fused bis[2-(2′-hydroxyphenyl)benzoxazole] 5, which is capable of giving ESIPT emission, is found to be a useful fluorescent sensor for fluoride detection. Upon binding to fluoride, bis(HBO) 5 shows a large spectral shift in both fluorescence (from ～490 nm to ～440 nm) and absorption (from 353 nm to 392 nm). In comparison with the isomeric 4, bis(HBO) 5 dramatically improves the sensitivity in fluoride binding (by an order of magnitude), revealing a large impact of regiochemistry on the sensor performance. ¹H NMR has been used to study the fluoride binding, and to correlate the intramolecular hydrogen bonding with the fluoride response. Sensitivity of 5 towards fluoride is as low as 10^?5 M. Bis(HBO) 5 also showed excellent selectivity towards fluoride while being silent to other anions (Cl^?, Br^?, HS^? and PO₄^3?), thus making 5 a potentially useful probe.     

A functional applied material on recognition of metal ion zinc based on the double azine compound

A colorimetric and fluorescent probe L has been designed and synthesized, which bearing the double azine moiety and showing a detection limit of 2.725 × 10^?7 M towards Zn²⁺. Based on the basic recognition mechanism of ESIPT and CHEF effect, the L has high selectivity and sensitivity to only Zn²⁺ (not Fe³⁺, Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Cr³⁺, and Mg²⁺) within the physiological pH range (pH = 7.0–8.4) and showed a fluorescence switch. Moreover, this detection progress occured in the DMSO/H₂O ～ HEPES buffer (80/20, v/v; pH 7.23) solution which can conveniently used on test strip.     

A highly selective HBT-based “turn-on” fluorescent probe for hydrazine detection and its application

As one of the important industrial chemicals, hydrazine (N₂H₄) can be inhaled through the skin, leading to many serious health issues. In this paper, we constructed a novel turn-on fluorescent probe HBTM for N₂H₄ detection based on ESIPT and ICT mechanism by incorporating the methyl dicyanvinyl group to 2-(2′-hydroxylphenyl) benzothiazole (HBT) fluorophore. The probe showed the following advantages: high sensitivity with detection limit of 2.9 × 10^?7 M, high selectivity over other related interfering species, wide linear range of 0–140 μM and pH value adaptation. Moreover, the probe could detect N₂H₄ on paper strips and image N₂H₄ in living cells.     

Cytotoxic arylbenzofuran and stilbene derivatives from the twigs of Artocarpus heterophyllus

Four new natural products, including three arylbenzofurans named heterophyllenes A-C (1–3), and one stilbene named heterophyllene D (4), together with twenty-one known compounds were isolated from the twigs of Artocarpus heterophyllus and their structures elucidated by spectroscopic methods, mainly 1D and 2D NMR spectroscopy. The cytotoxic activity of selected compounds against KB, MCF-7 and NCI-H187 cell lines was evaluated. Heterophyllene C (3) exhibited cytotoxicity against the MCF-7 cell line with an IC₅₀ value of 12.56 μM. Additionally, the known compounds norartocarpin and artocarpin showed cytotoxic activity against MCF-7 and KB cell lines with IC₅₀ values of 10.04 and 13.57 μM, respectively. Both compounds also displayed cytotoxicity against the NCI-H187 cell line with values of 14.78 and 14.21 μM, respectively.     

A new colorimetric and fluorescent ratiometric sensor for Hg2+ based on 4-pyren-1-yl-pyrimidine

A novel fluorescent ratiometric chemosensor based on 4-pyren-1-yl-pyrimidine (PPM) has been designed and prepared for the detection of Hg²⁺ in the presence of other competing metal ions in acetonitrile. The photo exhibits fluorescence color change of PPM from blue to green without and with Hg²⁺, which red shift of wavelength about 105 nm in fluorescence emission spectra. It can serve as a highly selective chemodosimeter for Hg²⁺ with ratiometric and naked-eye detection. The photophysical properties of PPM confirmed a 2:1 (PPM–Hg²⁺) binding model and the spectral response toward Hg²⁺ was proved to be reversible.     

Highly sensitive fluorescent sensor targeting CuCl2 based on thiophene attached anthracene compound (TA)

A novel thiophene attached anthracene (TA) based fluorescent compound was designed and synthesized. The TA showed a high quantum yield (Qy = 0.34) in regard to fluorescence. We applied this TA compound to detect specific metal compound and found that it could identify CuCl₂ from other metals through dramatic fluorescence change at λ_max = 460 nm. It showed strong quenching fluorescence property with CuCl₂ while with other metal compounds it exhibited strong blue fluorescence emission. UV/Vis absorption spectroscopy clearly demonstrated that the quenching property of TA at λ_max = 460 nm was due to overlapping of the fluorescence peak of TA at λ_max = 460 nm and the absorption band of CuCl₂ (from 190 nm to 525 nm). Binding constant (K′), which was 0.0895 mM^?2, indicated a complexation ratio between TA and CuCl₂ as 1:2 and this interaction induced quenching property.     

Tunable white-light emission of lanthanide(III) hybrid material based on hectorite

Lanthanide(III) luminescent hybrid materials based on the layered hectorite have been successfully prepared, showing tunable emission colors as well as white light by varying the molar ratio between Eu³⁺ and Tb³⁺.