动力刚化与多体系统刚-柔耦合动力学

首先指出当前柔性多体系统动力学的大量工程研究背景,在回顾柔性多体系统动力学研究进展后指出动力刚化的现象揭示了刚－柔耦合的零次建模方法的局限,认为进一步深入进行柔性多体系统刚－柔耦合动力学的研究是多体系统动力学研究的新阶段,文末提出了刚－柔耦合动力学的研究任务。     

刚-柔-热耦合多体系统的动力学分析

本文研究了柔性多体系统刚-柔-热耦合动力学特性。以哈勃天文望远镜(HST)为研究对象,基于柔性多体系统动力学理论,考虑了柔性附件弹性变形引起的热辐射边界条件的变化,建立了中心刚体和太阳能毯柔性附件多体系统的刚-柔-热耦合的动力学方程。通过对热载荷作用下哈勃天文望远镜多体系统的数值仿真研究了热辐射角、阻尼系数、比热容、支撑梁、太阳能毯之间的轴向力等参数对于柔性附件热颤振的影响;并提出增加结构阻尼、减小支撑梁和太阳能毯之间的轴向力、选择阻尼系数和比热容均较大的支撑梁材料、采用柔度较大的主体桶材料等改善热颤振的措施。     

刚-柔耦合动力学系统的建模理论研究

刚－柔耦合动力学系统的传统的混合坐标方法是零次近似方法,在建模过程中,直接套用的结构动力学的小变形假设,忽略了变形位移的高次耦合变形量．本文对柔性梁建立较零次近似更精确的高次耦合动力学模型,从连续介质力学理论出发,在变形位移中,计及横向位移引起的轴向缩短,导出变形位移的二次耦合量．用一致质量有限元方法对梁进行离散,基于Jourdain速度变分原理导出大范围运动为自由的柔性梁的刚－柔耦合动力学方程．计算了柔性重力摆的角速度和摆端点的横向变形,揭示零次近似模型和耦合模型的刚－柔耦合动力学性质的根本差异．     

柔性体的刚-柔耦合动力学分析

对柔性梁的刚-柔耦合动力学特性进行分析.从连续介质力学理论出发,在纵向变形位移中计及了耦合变形量,用Jourdain速度变分原理导出了柔性梁的刚-柔耦合动力学方程.定量地研究了非惯性系下柔性梁的动力学性质,比较了在不同转速下零次近似模型和耦合模型的振动频率的差异.为了确定零次近似模型的适用范围,引入与转速和基点加速度有关的相关系数,提出了零次近似模型的适用判据为相关系数小于0.1.在此基础上,进一步研究在大范围运动是自由的情况下柔性梁的大范围运动和变形运动的耦合机理,计算了带平动刚体的柔性梁的大范围运动规律,揭示零次近似模型和耦合模型的刚-柔耦合动力学性质的根本差异.     

柔性多体系统刚-柔耦合动力学

首先指出大量复杂系统动力学与控制性态分析与优化等工程问题对柔性多体系统动力学领域的进一步需求,在回顾柔性多体系统动力学研究的若干阶段与当前的研究现状后指出：柔性多体系统刚- 柔耦合动力学的研究是多体系统动力学的一个新的阶段．文末提出了刚- 柔耦合动力学的研究任务。     

考虑刚弹耦合作用的柔性多体连续系统动力学建模

基于Ｈａｍｉｌｔｏｎ原理建立起一般柔性体连续系统的动力学建模方法,进而以水平面内作大范围回转运动的柔性梁为例,在Ｅｕｌｅｒ－Ｂｅｒｎｏｕｌｌｉ梁模型的假设前提下,根据轴向不可伸长的柔性梁的几何约束条件;推导出作大范围刚体运动的柔性梁连续系统的一致线性化振动微分方程．采用假设模态法对其离散化,导出考虑刚弹耦合作用的柔性梁有限维离散化动力学模型．最后给出仿真算例,验证了该方法的有效性．     

动力刚化多体系统动力学

本文利用几何非线性的应变－－位移关系，在小变形假设条件下，得到了一般柔性构件弹性有的广义价值标二阶小量表达式。在此基础上，利用Ｋａｎｅ方程的Ｈｕｓｔｏｎ方法，在推导偏（角）速度表达式后，作适当的线性化处理，以使动力刚度项得以保留，从而建立了动力刚化多体系统的动力学方程，仿真算例证明了该理论的正确性和有效性。     

复杂刚—柔混合机构的动力学分析方法

本文应用柔性多体系统理论分析了复杂刚－柔混合机构的动力学问题，用单项递推组集方法建立了系统的动力学模型，用模态综合方法描述柔性的变形，对空间四连杆机构进行了动力这仿真。讨论了安装误差对系统动力学性态的影响。     

多柔体系统动力学方程一种数值求解方法

本文提出用含有二阶自校正功能的增广法和半隐式Runge-Kutta法相结合求解多柔体系统动力学中的微分-代数型方程。并给出了计算实例和实验验证。     

计及剪切变形的Timoshenko梁的刚-柔耦合动力学

研究带中心刚体的Timoshenko梁的刚-柔耦合动力学问题。从力学的基本原理出发,基于Timoshenko梁假设,用虚功原理建立了带中心刚体的柔性梁的刚-柔耦合动力学方程。仿真计算结果表明,随着梁的惯量矩和横截面积比逐渐增大,剪切变形对梁的刚-柔耦合动力学性态产生了一定的影响。此外,本文还对不计剪切变形的Euler-Bernoulli梁假设的适用性进行了研究。     

Ride comfort evaluation for road vehicle based on rigid-flexible coupling multibody dynamics

In the present research two different whole vehicle multibody models are established respectively, including rigid and rigid-flexible coupling multibody vehicle models. The former is all composed by rigid bodies while in the later model, the flexible rear suspension is built based on the finite element method (FEM) and mode superposition method, in which the deformations of the components are considered. The ride simulations with different speeds are carried out on a 3D digitalized road, and the weighted root mean square (RMS) of accelerations on the seat surface, backrest and at the feet are calculated. The comparison between the responses of the rigid and rigid-flexible coupling multibody models shows that the flexibility of the vehicle parts significantly affects the accelerations at each position, and it is necessary to take the flexibility effects into account for the assessment of ride comfort.     

The coupling dynamical modeling theory of flexible multibody system

Based on the deformation theory of elastic beams, the coupling effect between the coupling displacements of a point on the middle line of beam and large overall motion is presented. The “coupling matrix library” and Jourdain's variation principle and single direction recursive formulation method are used to establish the general coupling dynamical equations of flexible multibody system. Two typical examples show the coupling effect between coupling displacements and large overall motion on the dynamics of flexible multibody system consisting of beams. The project supported by the National Natural Science Foundation of China (No. 19832040).     

Dynamic modeling and simulation of flexible cable with large sag

ＩｎｔｒｏｄｕｃｔｉｏｎＦｌｅｘｉｂｌｅｃａｂｌｅｓｗｉｔｈｌａｒｇｅｓａｇａｒｅａｋｉｎｄｏｆｓｐｅｃｉａｌｅｎｇｉｎｅｅｒｉｎｇｓｔｒｕｃｔｕｒｅｓ.Ｔｈｅｙａｒｅｕｓｅｄｉｎｏｖｅｒｈｅａｄｔｒａｎｓｍｉｓｓｉｏｎｌｉｎｅｓｗｉｔｈｈｉｇｈｖｏｌｔａｇｅ,ａｅｒｉａｌｃａｂｌｅｓｆｏｒｔｒａｎｓｐｏｒｔ,ｌａｒｇｅｓｐａｎｓｔｒｕｃｔｕｒｅｓｉｎｂｒｉｄｇｅｓａｎｄｃｉｖｉｌｅｎｇｉｎｅｅｒｉｎｇ[1,2].Ｔｈｅｙｗｉｌｌｍｏｖｅｉｎｌａｒｇｅｒａｎｇｅｕｎｄｅｒｗｉｎｄ,ｌｏａｄｄｅｓｉｇｎｅｄ…     

Fast simulation of flexible multibody dynamics with electric-hydraulic drive system

Hardware in the loop simulation (HILS) has been investigated in the field of the multibody dynamics (MBD), which combined the MBD simulation with the actual mechanical system. The fast simulation is necessary for the HILS system in order to require the real time simulation. This paper presents a fast simulation technique using the domain decomposition method with the iteration in the flexible multibody system in which flexible linkage system and electro-hydraulic drive system are coupled with each other.     

柔性多体系统的递推组集建模与仿真软件的实现

简要地阐述多体系统动力学单向递推组集建模方法，介绍根据这种方法开发而成的仿真软件系统ＤＡＦＭＢ及它的功能与特点。通过双摆算例指出本文提出的模型在计算效率与计算精度方面优于笛卡尔坐标的微分－代数方程。     

平面柔性多体系统正碰撞动力学建模理论研究

针对目前柔性多体系统碰撞动力学建模方法存在的不足,对影响碰撞动力学仿真的主要因素如柔性体建模和碰撞初始条件进行分析,建立起基于变约束的柔性体碰撞动力学方程。首先,为了解决子结构法在处理碰撞界面搜索时面临的难题,引入多体系统柔性体有限元描述方法,推导出凸形柔性体接触点间法向位移约束的二阶导数形式。其次,从碰撞引起的接触界面速度不连续机理出发,结合连续介质力学间断面理论,给出碰撞瞬时由物体本身物理性质决定的接触位置处速度跳跃公式。最后对两弹性圆盘低速碰撞问题进行数值仿真。结果表明本文提出的改进方法符合力学基本原理,仿真结果满足收敛性要求。     

Recursive Lagrangian dynamic modeling and simulation of multi-link spatial flexible manipulator arms

The dynamics for multi-link spatial flexible manipulator arms consisting of n links and n rotary joints is investigated. Kinematics of both rotary-joint motion and link deformation is described by 4 - 4 homogenous transformation matrices, and the Lagrangian equations are used to derive the governing equations of motion of the system. In the modeling the recursive strategy for kinematics is adopted to improve the computational efficiency. Both the bending and torsional flexibility of the link are taken into account. Based on the present method a general-purpose software package for dynamic simulation is developed. Dynamic simulation of a spatial flexible manipulator arm is given as an example to validate the algorithm.     

Partition method for impact dynamics of flexible multibody systems based on contact constraint

The impact dynamics of a flexible multibody system is investigated. By using a partition method, the system is divided into two parts, the local impact region and the region away from the impact. The two parts are connected by specific boundary conditions, and the system after partition is equivalent to the original system. According to the rigid-flexible coupling dynamic theory of multibody system, system＇s rigid-flexible coupling dynamic equations without impact are derived. A local impulse method for establishing the initial impact conditions is proposed. It satisfies the compatibility con- ditions for contact constraints and the actual physical situation of the impact process of flexible bodies. Based on the contact constraint method, system＇s impact dynamic equa- tions are derived in a differential-algebraic form. The contact/separation criterion and the algorithm are given. An impact dynamic simulation is given. The results show that system＇s dynamic behaviors including the energy, the deformations, the displacements, and the impact force during the impact process change dramatically. The impact makes great effects on the global dynamics of the system during and after impact.     

An approach for the coupled simulation of machining processes using multibody system and smoothed particle hydrodynamics algorithms

The prediction accuracy of a simulation method is limited by its theoretical background. This fact can lead to disadvantages regarding the simulation quality when investigating systems of high complexity, e.g. containing components showing a fairly different behavior. To overcome this limitation, co-simulation approaches are used more and more, combining the advantages of different simulation disciplines. That is why we propose a new strategy for the dynamic simulation of cutting processes. The method couples Lagrangian particle methods, such as the smoothed particle hydrodynamics (SPH) method, and multibody system (MBS) tools using co-simulations. We demonstrate the capability of the new approach by providing simulation results of an orthogonal cutting process and comparing them with experimental data.     

柔性多体系统动力学实验研究综述

介绍了国内外柔性多体系统动力学实验研究现状,分为三个方面,即理论模型验证实验、动力学特性的实验研究和其它实验.柔性多体系统动力学建模理论的发展经历了3个阶段:运动-弹性动力学(KED)方法、传统混合坐标方法和计及了动力刚化效应的各种非线性理论.关于这些理论的模型验证实验均在本文中作了重点介绍.文中还对柔性多体系统动力学性态的研究实验也作了介绍,包括系统模态特性和共振等非线性力学行为.关于机械臂控制和碰撞研究实验虽有提及,但不作为重点.随后,着重介绍了柔性体弹性振动位移的测量和阻尼因素的处理这两个在实验不可避免但又难以解决的问题,尤其是结构阻尼和大范围运动引起的空气阻力.最后指出了今后的研究方向.文中对一些较为重要的实验装置也着重予以介绍,并给出了部分实验图片及数据曲线,以给读者一个更好的理解和参考.