Translational oscillations of a microsphere in superfluid helium

The translational motion of a microsphere (radius 100 μm) in liquid helium is investigated. The sphere is levitating inside a superconducting capacitor and oscillates about its equilibrium position. The velocity amplitude and the resonance frequency are measured as a function of driving force and temperature (0.35 K up to 2.2 K). By increasing the driving force we first find a linear regime (laminar flow) which changes abruptly into a nonlinear one (turbulent flow). For temperatures below 0.7 K the linear drag is given by ballistic roton and phonon scattering whereas for temperatures above 1.1 K the hydrodynamic force on the sphere is described by Stoke's solution. In the turbulent regime, above a temperature independent threshold velocity, we find the drag force to be given by turbulence in the superfluid component plus an essentially laminar drag by the normal component.     

压缩拐角激波/湍流边界层干扰特性分析

用大涡模拟方法对Mach数3.0下的压缩拐角激波/湍流边界层干扰问题进行数值研究.对拐角上游平板区域边界层转捩及湍流进行模拟,设定平板区域长度,使得转捩过程于平板区域发生并充分完成,从而在拐角处产生激波/湍流边界层相互干扰,研究激波/湍流边界层的作用机理.研究表明:流场能够在非定常扰动激励下迅速转捩,并于平板区发展为完全湍流;湍流边界层与激波相互作用过程中,拐角附近分离区较层流情况明显减小;展向不同区域分离区大小差异较大,局部区域分离现象消失.     

Orientation distribution of fibres in a channel flow of fibre suspension

The orientation and concentration distributions of fibres in laminar and turbulent channel flows are investigated numerically. The obtained results are in good agreement with the experimental data. In the laminar flow regime, more fibres orient to the flow direction as the Reynolds number increases. The shear rate of fluid around a fibre plays an important role in determining the orientation distribution of fibres, while the fibre density and the fibre aspect-ratio have marginal influence on the orientation distribution. In the turbulent regime, the orientation distribution of fibres becomes more homogeneous with the increase of Reynolds number, and the concentration profile is flatter than that in the laminar regime. The fluctuating intensity of fibre velocity in the downstream direction is larger than that in the lateral directions.     

How does flow in a pipe become turbulent?

The transition to turbulence in pipe flow does not follow the scenario familiar from Rayleigh-Benard or Taylor-Couette flow since the laminar profile is stable against infinitesimal perturbations for all Reynolds numbers. Moreover, even when the flow speed is high enough and the perturbation sufficiently strong such that turbulent flow is established, it can return to the laminar state without any indication of the imminent decay. In this parameter range, the lifetimes of perturbations show a sensitive dependence on initial conditions and an exponential distribution. The turbulence seems to be supported by threedimensional travelling waves which appear transiently in the flow field. The boundary between laminar and turbulent dynamics is formed by the stable manifold of an invariant chaotic state. We also discuss the relation between observations in short, periodically continued domains, and the dynamics in fully extended puffs.     

The mechanism of breakdown in laminar-turbulent transition of a supersonic boundary layer on a flat plate-temporal mode

Recently, more and more attentions have been paid to the transition and turbulence of compressible flows, especially supersonic flows, but progress is very slow. In general, attentions were paid to the evolution of disturbances in laminar flow region, and the mechanism of breakdown process in laminar-turbulent transition remains unclear. The conventional idea of what leads to laminar-turbulent transition is that the transi-tion starts from the amplification of disturbances, and when the distur…     

等离子体射流产生与特性的实验研究

本文报道热等离子体射流产生及射流特性的实验研究结果。采用同一个直流等离子体发生器,工作气体流量小时产生出层流等离子体长射流,射流长度随气体流量或弧电流的增加而明显增加;工作气体流量大时则产生出湍流等离子体短射流,此时射流长度几乎与工作气体流量或弧电流无关;在层流与湍流等离子体射流工况之间,存在一个流动状况不稳定的过渡区,此时等离子体射流的平均长度随气流量的加大而减小,但随弧电流的加大而明显加大。层流等离子体长射流有相当好的刚性。     

Experiments to Explore the Mechanisms of Heat Transfer in Nanocrystalline Alumina/Water Nanofluid under Laminar and Turbulent Flow Conditions

Abstract

Heat transfer characteristics of water-based nanocrystalline alumina (Al₂O₃) nanofluids flowing through a uniformly heated tube under a fully developed laminar and turbulent flow regime is investigated experimentally in the present work to explore the heat transfer mechanism in nanofluids. In a laminar flow, the increase in Nusselt number was attributed to the thermophysical properties of the nanofluid. The movement of nanoparticles, along with the turbulent eddies in the turbulent core region and diffusion mechanism, such as thermophoresis, in the laminar sublayer are believed to be the reasons for enhanced heat transfer in turbulent region. The compatibility of Al₂O₃/water nanofluids was also examined by monitoring its color.     

层流与湍流等离子体冲击射流特性比较

本文采用数值模拟方法,对层流与湍流氩等离子体射流在空气环境中冲击平板时的流动与传热特性进行了对比研究.结果表明,在平板和射流进口间的距离较大时,平板的存在只对其附近的射流参数分布有较大影响,层流等离子体冲击射流的温度与轴向速度的轴向梯度明显小于湍流等离子体冲击射流情形;由于在平板表面形成的径向壁面射流对引射的附加贡献,层流和湍流等离子体冲击射流对环境空气的引射量明显增加.     

The silent base flow and the sound sources in a laminar jet

An algorithm to compute the silent base flow sources of sound in a jet is introduced. The algorithm is based on spatiotemporal filtering of the flow field and is applicable to multifrequency sources. It is applied to an axisymmetric laminar jet and the resulting sources are validated successfully. The sources are compared to those obtained from two classical acoustic analogies, based on quiescent and time-averaged base flows. The comparison demonstrates how the silent base flow sources shed light on the sound generation process. It is shown that the dominant source mechanism in the axisymmetric laminar jet is "shear-noise," which is a linear mechanism. The algorithm presented here could be applied to fully turbulent flows to understand the aerodynamic noise-generation mechanism.     

合成冷/热射流控制超声速边界层流动稳定性

为了探究超声速边界层流动稳定性及其转捩控制机理,提出基于合成冷/热射流的边界层速度-温度耦合控制方法,并通过数值模拟研究了Ma=4.5超声速平板边界层不稳定波的传播,采用线性稳定性理论中的时间模式分析了壁面吹吸、射流温度、扰动频率、扰动振幅等对不稳定波控制效果的影响.结果表明:无射流控制时,边界层内同时存在不稳定的第一模态扰动波和第二模态扰动波,且二维波形式的第二模态占主导地位;壁面吹吸作用下,仅出现更加不稳定的第二模态,第一模态被抑制;速度-温度耦合控制下,射流温度对扰动模态的不稳定区域大小及扰动增长率影响显著,射流温度与来流温度不同时,温度的脉动使得流动转捩为湍流的速度加快,边界层速度型更加饱满,抗干扰能力增强,流动稳定性提高;高频的吹吸扰动对流场的控制效果优于低频扰动,扰动频率超过400 Hz时,第二模态扰动波时间增长率降低,扰动分量对边界层速度剖面和温度剖面的修正加快,第二模态更加稳定;扰动振幅减小为主流速度的1%时,仅出现时间增长率较小的第二模态,控制效果较好,进一步减小时,第一模态重新出现,并且波数范围与第二模态先重合后分离,对应的时间增长率先增加后减小.研究结果为边界层转捩控制技术提供了新的思路.     

圆柱绕流气动声的偶极子及四极子源法定量研究

以亚临界三维圆柱绕流的气动噪声为对象,研究声类比理论中偶极子及四极子源模型在预测低Mach数流动气动声的可靠性及准确性。使用大涡模拟(LES)得到非定常流场,并依据声类比中的Curle等效偶极子面源和Lighthill四极子体源模型,提取相应的声源数据,经Fourier变换得到涡脱落频率处的声源信息,进而定量预测圆柱绕流的气动声。结果表明:Curle模型的结果与实验结果吻合良好,Lighthill体源模型预测的准确性依赖于声源区域截断,不恰当的声源截断将导致错误的声场预测。      

激波与层流/湍流边界层相互作用实验研究

在超声速风洞中,分别对层流和湍流来流条件下的边界层和斜激波(激波强度足以引起流动分离)相互干扰进行了实验研究,利用纳米粒子示踪平面激光散射(NPLS)技术获得了两种条件下流场的精细结构图像;利用粒子图像测速(PIV)技术获得了两种条件下流场的速度场和涡量场;综合运用NPLS结果和PIV结果对比分析了两种流动的瞬时流动结构和时间相关性,实验结果表明:层流边界层内的分离区呈现出狭长的条状,而湍流边界层内分离区呈现出较规则的椭圆;在入射激波上游距入射点较远的位置,层流边界层外围拟序结构会诱导出一系列压缩波系,进而汇聚成空间位置不稳定的诱导激波,而湍流边界层则是在入射激波上游较近的地方直接形成较强且稳定的诱导激波;在入射激波下游,层流边界层内的膨胀区域较小且急促,膨胀后产生的再附激波很弱,而湍流边界层内的膨胀区域较大,膨胀后产生的激波较强。     

Vortex dynamics of a trapezoidal bluff body placed inside a circular pipe

The influence of Reynolds number and blockage ratio on the vortex dynamics of a trapezoidal bluff body placed inside a circular pipe is studied experimentally and numerically. Low aspect ratio, high blockage ratio, curved end conditions (junction of pipe and bluff body), axisymmetric upstream flow with shear and turbulence are some of the intrinsic features of this class of bluff body flows which have been scarcely addressed in the literature. A large range (200:200,000) of Reynolds number (Re_D) is covered in this study, encompassing all the three pipe flow regimes (laminar, transition and turbulent). Four different flow regimes are defined based on the distinct features of Strouhal number (St)–Re_D relation: steady, laminar irregular, transition and turbulent. The wake in the steady regime is stationary with no oscillations in the shear layer. The laminar regime is termed as irregular owing to irregular vortex shedding. The vortex shedding in this regime is observed to be symmetric. The emergence of separation bubble downstream of the bluff body on either side is another interesting feature of this regime, which is further observed to be symmetric. Two pairs of mean streamwise vortices are noticed in the near-wake regime, which are termed as reverse dipole-type wake topology. Beyond the irregular laminar regime, the Strouhal number falls gradually and vortex shedding becomes more periodic. This regime is named transition and occurs close to the Reynolds number at which transition to turbulence takes place in a fully developed pipe. The turbulent regime is characterised by a nearly constant Strouhal number. Typical Karman-type vortex shedding is noticed in this regime. The convection velocity, wake width formation length and irrecoverable pressure loss are quantified to highlight the influence of blockage ratio. These results will be useful to develop basic understanding of vortex dynamics of confined bluff body flow for several practical applications.     

CAA broadband noise prediction for aeroacoustic design

The current status of a computational aeroacoustics (CAA) approach to simulate broadband noise is reviewed. The method rests on the use of steady Reynolds averaged Navier-Stokes (RANS) simulation to describe the time-averaged motion of turbulent flow. By means of synthetic turbulence the steady one-point statistics (e.g. turbulence kinetic energy) and turbulent length- and time-scales of RANS are translated into fluctuations having statistics that very accurately reproduce the initial RANS target-setting. The synthetic fluctuations are used to prescribe sound sources which drive linear perturbation equations. The whole approach represents a methodology to solve statistical noise theory with state-of-the-art CAA tools in the time-domain. A brief overview of the synthetic turbulence model and its numerical discretization in terms of the random particle-mesh (RPM) and fast random particle-mesh (FRPM) method is given. Results are presented for trailing-edge noise, slat noise, and jet noise. Some problems related to the formulation of vortex sound sources are discussed.     

Friction factor correlations for laminar, transition and turbulent flow in smooth pipes

In this paper we derive an accurate composite friction factor vs. Reynolds number correlation formula for laminar, transition and turbulent flow in smooth pipes. The correlation is given as a rational fraction of rational fractions of power laws which is systematically generated by smoothly connecting linear splines in log-log coordinates with a logistic dose curve algorithm. This kind of correlation seeks the most accurate representation of the data independent of any input from theories arising from the researchers’ ideas about the underlying fluid mechanics. As such, these correlations provide an objective metric against which observations and other theoretical correlations may be applied. Our correlation is as accurate, or more accurate, than other correlations in the range of Reynolds numbers in which the correlations overlap. However, our formula is not restricted to certain ranges of Reynolds numbers but instead applies uniformly to all smooth pipe flow data for which data is available. The properties of the classical logistic dose response curve are reviewed and extended to problems described by multiple branches of power laws. This extended method of fitting which leads to rational fractions of power laws is applied to data of Marusic and Perry (1995) [1] for the velocity profile in a boundary layer on a flat plate with an adverse pressure gradient, to data of Nikuradse (1932) [2] and McKeon et al. (2004) [3] on friction factors for flow in smooth pipes and to the data of Nikuradse [4] for effectively smooth pipes.     

Ultrasonic flow measurement and wall acoustic impedance effects

An examination of the influence of wall acoustic impedance effects on sound propagation in flowing liquids confined by cylindrical walls is presented. Special focus is given to the importance of the wall acoustic impedance value for ultrasonic flow meter performance. The mathematical model presented allows any radially-dependent axial flow profile to be examined in the linear flow acoustics regime where fluid flow speed is much smaller than the fluid sound speed everywhere in the fluid medium.     

Turbulent propagation of premixed flames in the presence of Darrieus–Landau instability

We investigate the role played by hydrodynamic instability in the wrinkled flamelet regime of turbulent combustion, where the intensity of turbulence is small compared to the laminar flame speed and the scale large compared to the flame thickness. To this end the Michelson–Sivashinsky (MS) equation for flame front propagation in one and two spatial dimensions is studied in the presence of uncorrelated and correlated noise representing a turbulent flow field. The combined effect of turbulence intensity, integral scale, and an instability parameter related to the Markstein length are examined and turbulent propagation speed monitored for both stable planar flames and corrugated flames for which the planar conformation is unstable. For planar flames a particularly simple scaling law emerges, involving quadratic dependence on intensity and a linear dependence on the degree of instability. For corrugated flames we find the dependence on intensity to be substantially weaker than quadratic, revealing that corrugated flames are more resilient to turbulence than planar flames. The existence of a threshold turbulence intensity is also observed, below which the corrugated flame in the presence of turbulence behaves like a laminar flame. We also analyze the conformation of the flame surface in the presence of turbulence, revealing primary, large-scale wrinkles of a size comparable to the main corrugation. When the integral scale is much smaller than the characteristic corrugation length we observe, in addition to primary wrinkles, secondary small-scale wrinkles contaminating the surface. The flame then acquires a multi-scale, self-similar conformation, with a fractal dimension, for one-dimensional flames, plateauing at 1.23 for large intensities. The existence of an intermediate integral scale is also found at which the turbulent speed is maximized. When two-dimensional flames are subject to turbulence, the primary wrinkling patterns give rise to polyhedral-cellular structures which bear a very close resemblance to those observed in experiments on hydrodynamically unstable expanding spherical flames.     

The self-similarity of wall-bounded temporally accelerating turbulent flows

From the study of viscous flow it is known that certain time-dependent laminar problems, such as the impulsively started flat plate and the diffusion of a vortex sheet, possess self-similar solutions. Previous studies of turbulent channel and pipe flows accelerating between two steady states have shown that the flow field evolves in three distinct stages. Furthermore, recent direct numerical simulations have shown that the perturbation velocity, i.e. the surplus velocity from the initial value, in an impulsively accelerating turbulent channel and pipe flow also possesses a self-similar distribution during the initial stage. In here, these results are developed analytically and it is shown that accelerating flows in which the centreline velocity develops as U^∧_c(t) = U₀(t/t₀)^m will possess a self-similar velocity distribution during the initial stage. The displacement thickness of the perturbation velocity is shown to be dependent only on the type of acceleration, and not on the initial Reynolds number, the acceleration rate or the change in Reynolds number. The derived formulas are verified with good agreement against measurements performed in a linearly accelerating turbulent pipe flow and with data from channel flow simulations.     

The pulsating laminar flow in a rectangular channel

The finite difference method is used to solve the task of the developed pulsating laminar flow in a rectangular channel. The optimum of the difference scheme parameters was determined. Data on the amplitude and phase of the longitudinal velocity oscillations, the hydraulic and friction drag coefficients, the shear stress on the wall have been obtained. Using the dimensionless value of the frequency pulsations two characteristic regimes — the quasisteady-state regime and the high-frequency regime have been identified. In the quasi-steady-state regime, the values of all hydrodynamic quantities at each instant of time correspond to the velocity value averaged over the cross section at a given moment of time. It is shown that in the high-frequency regime, the dependences on the dimensionless oscillation frequency of oscillating components of hydrodynamic quantities are identical for rectilinear channels with a different cross-sectional form (round pipe, flat and a rectangular channels). The effect of the aspect ratio of the rectangular channel sides channel on the pulsating flow dynamics has been analyzed.     

FRICTION AND CONVECTION STUDIES OF R-134a IN MICROCHANNELS WITHIN THE TRANSITION AND TURBULENT FLOW REGIMES

Fluid flow and heat transfer characteristics of single-phase flows in microchannels for refrigerant R-134a were experimentally investigated. Experiments were conducted using rectangular channels micromilled in aluminum with hydraulic diameters ranging from approximately 112 to 210 w m and aspect ratios that varied from 1.0 to 1.5. Using overall temperature, flow rate, and pressure drop measurements, friction factors and convective heat transfer coefficients were experimentally determined for steady flow conditions. Effects of Reynolds number, relative roughness, and channel aspect ratio are examined in predicting friction factor and Nusselt number for the experiments. Experiment results indicated that transition from laminar to turbulent flow occurred between a Reynolds number of 2,000 and 4,000. Friction factor results were consistently lower than values predicted by macroscale correlations but exhibited the same trends with Reynolds numbers of macroscale correlations. Nusselt number results also exhibited a similar pattern of lower values obtained in the experiments than those predicted by commonly used macroscale correlations. Nusselt number results also indicated that channel size may suppress turbulent convective heat transfer and surface roughness may affect heat transfer characteristics in the turbulent regime.