Combining Coagulation and Electrocoagulation with UVA-LED Photo-Fenton to Improve the Efficiency and Reduce the Cost of Mature Landfill Leachate Treatment

This study focused on the reduction of the treatment cost of mature landfill leachate (LL) by enhancing the coagulation pre-treatment before a UVA-LED photo-Fenton process. A more efficient advanced coagulation pretreatment was designed by combining conventional coagulation (CC) and electro-coagulation (EC). Regardless of the order in which the two coagulations were applied, the combination achieved more than 73% color removal, 80% COD removal, and 27% SUVA removal. However, the coagulation order had a great influence on both final pH and total dissolved iron, which were key parameters for the UVA-LED photo-Fenton post-treatment. CC (pH = 5; 2 g L⁻¹ of FeCl₃6H₂O) followed by EC (pH = 5; 10 mA cm⁻²) resulted in a pH of 6.4 and 100 mg L⁻¹ of dissolved iron, whereas EC (pH = 4; 10 mA cm⁻²) followed by CC (pH = 6; 1 g L⁻¹ FeCl₃6H₂O) led to a final pH of 3.4 and 210 mg L⁻¹ dissolved iron. This last combination was therefore considered better for the posterior photo-Fenton treatment. Results at the best cost-efficient [H₂O₂]:COD ratio of 1.063 showed a high treatment efficiency, namely the removal of 99% of the color, 89% of the COD, and 60% of the SUVA. Conductivity was reduced by 17%, and biodegradability increased to BOD₅:COD = 0.40. With this proposed treatment, a final COD of only 453 mg O₂ L⁻¹ was obtained at a treatment cost of EUR 3.42 kg COD⁻¹.     

Calcium Sulfite Solids Activated by Iron for Enhancing As(III) Oxidation in Water

Desulfurized gypsum (DG) as a soil modifier imparts it with bulk solid sulfite. The Fe(III)–sulfite process in the liquid phase has shown great potential for the rapid removal of As(III), but the performance and mechanism of this process using DG as a sulfite source in aqueous solution remains unclear. In this work, employing solid CaSO₃ as a source of SO₃²⁻, we have studied the effects of different conditions (e.g., pH, Fe dosage, sulfite dosage) on As(III) oxidation in the Fe(III)–CaSO₃ system. The results show that 72.1% of As(III) was removed from solution by centrifugal treatment for 60 min at near-neutral pH. Quenching experiments have indicated that oxidation efficiencies of As(III) are due at 67.5% to HO^•, 17.5% to SO₅^•− and 15% to SO₄^•−. This finding may have promising implications in developing a new cost-effective technology for the treatment of arsenic-containing water using DG.     

抗氧剂亚硫酸钠、亚硫酸氢钠及焦亚硫酸钠氧化反应速率常数的测定

为评价抗氧剂的抗氧化能力, 测定了抗氧剂亚硫酸钠、亚硫酸氢钠及焦亚硫酸钠在水溶液中与氧反应的速率常数. 在溶液中连续通入足量的氧气, 维持溶解氧浓度恒定. 用碘量法测定亚硫酸钠、亚硫酸氢钠及焦亚硫酸钠在水溶液中不同时刻的浓度, 用氧电极测定溶液中溶解氧的浓度, 作出亚硫酸钠、亚硫酸氢钠及焦亚硫酸钠的降解曲线, 计算亚硫酸钠、亚硫酸氢钠及焦亚硫酸钠氧化反应速率常数. 结果表明, 亚硫酸钠、亚硫酸氢钠及焦亚硫酸钠在水溶液中与氧的反应均为零级反应. 由于在溶液中这三种抗氧剂存在解离平衡, 当溶液的pH值相同时这三种抗氧剂实质上是一样的, 其平均表观反应速率常数在25 ℃温度和pH 6.8, 4.0及9.2条件下分别为(1.34±0.03)×10^－3, (1.20±0.02)×10^－3和(6.58±0.02)×10^－3 mol•L^－1•h^－1.     

A Review on the Degradation of Pollutants by Fenton-Like Systems Based on Zero-Valent Iron and Persulfate: Effects of Reduction Potentials,pH, and Anions Occurring in Waste Waters

Among the advanced oxidation processes (AOPs), the Fenton reaction has attracted much attention in recent years for the treatment of water and wastewater. This review provides insight into a particular variant of the process, where soluble Fe(II) salts are replaced by zero-valent iron (ZVI), and hydrogen peroxide (H₂O₂) is replaced by persulfate (S₂O₈²⁻). Heterogeneous Fenton with ZVI has the advantage of minimizing a major problem found with homogeneous Fenton. Indeed, the precipitation of Fe(III) at pH > 4 interferes with the recycling of Fe species and inhibits oxidation in homogeneous Fenton; in contrast, suspended ZVI as iron source is less sensitive to the increase of pH. Moreover, persulfate favors the production of sulfate radicals (SO₄^•−) that are more selective towards pollutant degradation, compared to the hydroxyl radicals (^•OH) produced in classic, H₂O₂-based Fenton. Higher selectivity means that degradation of SO₄^•−-reactive contaminants is less affected by interfering agents typically found in wastewater; however, the ability of SO₄^•− to oxidize H₂O/OH⁻ to ^•OH makes it difficult to obtain conditions where SO₄^•− is the only reactive species. Research results have shown that ZVI-Fenton with persulfate works best at acidic pH, but it is often possible to get reasonable degradation at pH values that are not too far from neutrality. Moreover, inorganic ions that are very common in water and wastewater (Cl⁻, HCO₃⁻, CO₃²⁻, NO₃⁻, NO₂⁻) can sometimes inhibit degradation by scavenging SO₄^•− and/or ^•OH, but in other cases they even enhance the process. Therefore, ZVI-Fenton with persulfate might perform unexpectedly well in some saline waters, although the possible formation of harmful by-products upon oxidation of the anions cannot be ruled out.     

Evaluation of antioxidants using oxidation reaction rate constants

An evaluation method for the capacity of antioxidants to protect drugs against oxidation is presented. As a new viewpoint, to determine the priority of the competitive oxidations between the antioxidant and the protected drug, and to compare the drug-protection capacity of antioxidants, it is important to determine their oxidation rate constants using chemical kinetics instead of standard oxidation (or reduction) potentials. Sodium sulfite, sodium bisulfite and sodium pyrosulfite were used as models for the determination of oxidation reaction rate constants in aqueous solutions. In the experiments, sufficient air was continually infused into the solution to keep the concentration of dissolved oxygen constant. The residual concentrations of the antioxidants were determined by iodimetry, and the concentration of dissolved oxygen by oxygen electrode. The data were fitted by linear regressions to obtain the reaction rate constants. It was found that the degradation of sodium sulfite, sodium bisulfite or sodium pyrosulfite obeyed pseudo zero-order kinetics in the buffer solutions. Because of the ionization equilibrium, these three antioxidants have the same ion form in solutions at a definite pH value and therefore their apparent rate constants were essentially the same. The average apparent rate constants of the three antioxidants at 25°C are (1.34 ± 0.03) × 10⁻³ at pH 6.8, (1.20 ± 0.02) × 10⁻³ at pH 4.0 and (6.58 ± 0.02) × 10⁻³ mol·L⁻¹·h⁻¹ at pH 9.2, respectively. Translated from Acta Chimica Sinica, 2006, 64(6): 496–500 (in Chinese)     

Validated Stability-Indicating GC-MS Method for Characterization of Forced Degradation Products of Trans-Caffeic Acid and Trans-Ferulic Acid

When dealing with simple phenols such as caffeic acid (CA) and ferulic acid (FA), found in a variety of plants, it is very important to have control over the most important factors that accelerate their degradation reactions. This is the first report in which the stabilities of these two compounds have been systematically tested by exposure to various different factors. Forced degradation studies were performed on pure standards (trans-CA and trans-FA), dissolved in different solvents and exposed to different oxidative, photolytic and thermal stress conditions. Additionally, a rapid, sensitive, and selective stability-indicating gas chromatographic-mass spectrometric method was developed and validated for determination of trans-CA and trans-FA in the presence of their degradation products. Cis-CA and cis-FA were confirmed as the only degradation products in all the experiments performed. All the compounds were perfectly separated by gas chromatography (GC) and identified using mass spectrometry (MS), a method that additionally elucidated their structures. In general, more protic solvents, higher temperatures, UV radiation and longer storage times led to more significant degradation (isomerization) of both trans-isomers. The most progressive isomerization of both compounds (up to 43%) was observed when the polar solutions were exposed to daylight at room temperature for 1 month. The method was validated for linearity, precision as repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The method was confirmed as linear over tested concentration ranges from 1−100 mg L⁻¹ (r²s were above 0.999). The LOD and LOQ for trans-FA were 0.15 mg L⁻¹ and 0.50 mg L⁻¹, respectively. The LOD and LOQ for trans-CA were 0.23 mg L⁻¹ and 0.77 mg L⁻¹, respectively.     

Redox Speciation of Vanadium in Estuarine Waters Using Improved Methodology Based on Anion Exchange Chromatography Coupled to HR ICP-MS System

An improved methodology was developed for V redox speciation in estuarine waters using a hyphenated technique consisting of ion chromatograph (IC) with an anion exchange column and a high-resolution inductively coupled plasma mass spectrometer (HR ICP-MS). This approach enables the direct determination of V(V), whereas reduced species (mainly V(IV)) are calculated by subtracting V(V) concentrations from the measured total V concentration. Based on the “on-column” V(V) chelation mechanism by EDTA, with the eluent composed of 40 mmol L⁻¹ ammonium bicarbonate, 40 mmol L⁻¹ ammonium sulphate, 8 mmol L⁻¹ ethylenediaminetetraacetic acid and 3% acetonitrile, the method was successfully used for analyses of V redox speciation in samples taken in the vertical salinity gradient of the highly stratified Krka River estuary. Due to the matrix effects causing different sensitivities, a standard addition method was used for V(V) quantification purposes. The limit of detection (LOD) was also found to be matrix related: 101.68 ng L⁻¹ in the seawater and 30.56 µg L⁻¹ in the freshwater. Performed stability tests showed that V redox speciation is preserved at least 7 days in un-treated samples, possibly due to the stabilization of V-reduced species with natural organic matter (NOM). The dominant V form in the analysed samples was V(V) with the reduced V(IV) accounting for up to 26% of the total dissolved pool. The concentration of V(IV) was found to correlate negatively with the oxygen concentration. Significant removal of dissolved V was detected in oxygen depleted zones possibly related to the particle scavenging.     

Determination of sulfur contents of SO3, S2O3 and S based on the electrocatalytic interaction with homogeneous mediator tris(2,2'-bipyridyl)Ru(II)

A sensitive voltammetric method has been developed for the determination of total or single species of sulfur anions containing sulfide, sulfite and thiosulfate. The method is based on the catalytic effect of tris(2,2'-bipyridyl)Ruthenium(II) (Ru(bpy)₂^+ 2) as a homogeneous mediator on the oxidation of those anions at the surface of a glassy carbon electrode. A reversible redox couple of Ru(II)/Ru(III) were observed as a solute in aqueous solution. Cyclic voltammetry study showed that the catalytic current of the system depends on the concentration of the anions. Optimum pH values for voltammetric determination of sulfite, thiosulfate and sulfide has been found to be 5.6, 10.0 and 10.0, respectively. Under the optimized conditions the calibration curves have been obtained linear in the concentration ranges of 0.8–500.0, 0.4–1000.0 and 0.5–5000.0 µmol L^− 1 of SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The detection limits have been calculated to be 0.40, 0.17 and 0.33 µmol L^− 1 for SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The diffusion coefficients of sulfite and thiosulfate have been estimated using chronoamperometry. The chronoamperometric method also has been used to determine the catalytic rate constant for catalytic reaction of the Ru(bpy)₂^+ 2 with sulfite and thiosulfate. Finally the proposed method has been used for the determination of total sulfur contents in real samples of water and wastewater. Moreover the sulfite content in sugar and sulfur dioxide in air has been determined with satisfactory results.     

Complex Activity and Sensor Potential toward Metal Ions in Environmental Water Samples of N-Phthalimide Azo-Azomethine Dyes

Herein, the spectral and electrochemical characterizations of three different substituted N-phthalimide azo-azomethine (NAA) dyes (L) containing an o-hydroxy group and their NAA-M(II) chelates [M(II): Cu, Ni, Co, Pb] were reported by using UV–Vis and fluorescence spectroscopy and potentiometric and voltamperometric techniques. The pK value of the dyes as well as the stoichiometry and stability of the NAA-metal chelates were studied, and the stoichiometry was found to be mostly 1:2 (ML₂) with high complex stability constant values. The sensor activity of N-phthalimide azo-azomethine derivatives toward pH and metal ions has been also investigated and tested for indicator application in acid–base analysis and detection of Cu(II) ions in real samples of surface river water using voltamperometric detection. The results showed that one of the ligands possesses the highest electrochemical response upon binding to copper ions and could be successfully used in the analysis of copper in water at a concentration range of the analyte from 3.7 × 10⁻⁷ to 5.0 × 10⁻⁶ mol L⁻¹, with analytical characteristics of the method being Sr = 1.5%, LOD = 3.58 µg L⁻¹ and LOQ =11.9 µg L⁻¹     

PFAS Degradation in Ultrapure and Groundwater Using Non-Thermal Plasma

Perfluoroalkyl substances (PFAS) represent one of the most recalcitrant class of compounds of emerging concern and their removal from water is a challenging goal. In this study, we investigated the removal efficiency of three selected PFAS from water, namely, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and pefluorooctanesulfonic acid (PFOS) using a custom-built non-thermal plasma generator. A modified full factorial design (with 2 levels, 3 variables and the central point in which both quadratic terms and interactions between couple of variables were considered) was used to investigate the effect of plasma discharge frequency, distance between the electrodes and water conductivity on treatment efficiency. Then, the plasma treatment running on optimized conditions was used to degrade PFAS at ppb level both individually and in mixture, in ultrapure and groundwater matrices. PFOS 1 ppb exhibited the best degradation reaching complete removal after 30 min of treatment in both water matrices (first order rate constant 0.107 min⁻¹ in ultrapure water and 0.0633 min⁻¹ in groundwater), while the degradation rate of PFOA and PFHxA was slower of around 65% and 83%, respectively. During plasma treatment, the production of reactive species in the liquid phase (hydroxyl radical, hydrogen peroxide) and in the gas phase (ozone, NO_x) was investigated. Particular attention was dedicated to the nitrogen balance in solution where, following to NO_x hydrolysis, total nitrogen (TN) was accumulated at the rate of up to 40 mg^N L⁻¹ h⁻¹.     

Thermodynamic Solution Properties of a Biodegradable Chelant (L-glutamic-N,N-diacetic Acid,L-GLDA) and Its Sequestering Ability toward Cd2+

The thermodynamics of the interaction of L-glutamic-N,N-diacetic acid (GLDA) with protons was studied potentiometrically at different temperatures, ionic strengths and ionic media. Four protonation constants and corresponding enthalpy changes occurred at infinite dilution together with temperature and ionic strength coefficients. The medium effect was also interpreted in terms of the formation of weak complexes between the ligand and the cations of supporting electrolytes, resulting in a greater tendency of GLDA to chemically interact with Na⁺ rather than K⁺ and, in turn, (CH₃)₄N⁺. Formation constants of GLDA with Cd²⁺ were determined in NaCl_(aq) at different ionic strength values. Five complex species were found, namely CdL²⁻, CdHL⁻, CdH₂L⁰_(aq), Cd₂L⁰_(aq), and Cd(OH)L³⁻, whose formation constant values at infinite dilution were log β = 12.68, 17.61, 20.76, 17.52, and 1.77, respectively. All the species results were relevant in the pH range of natural waters, although the Cd₂L⁰_(aq) was observed only for C_Cd ≥ C_GLDA and concentrations of >0.1 mmol dm⁻³. The sequestering ability of GLDA toward Cd²⁺, evaluated by means of pL_0.5, was maximum at pH~10, whereas the presence of a chloride containing a supporting electrolyte exerted a negative effect. Among new generation biodegradable ligands, GLDA was the most efficient in Cd²⁺ sequestration.     

Salt Stress Mitigation via the Foliar Application of Chitosan-Functionalized Selenium and Anatase Titanium Dioxide Nanoparticles in Stevia (Stevia rebaudiana Bertoni)

High salt levels are one of the significant and major limiting factors on crop yield and productivity. Out of the available attempts made against high salt levels, engineered nanoparticles (NPs) have been widely employed and considered as effective strategies in this regard. Of these NPs, titanium dioxide nanoparticles (TiO₂ NPs) and selenium functionalized using chitosan nanoparticles (Cs–Se NPs) were applied for a quite number of plants, but their potential roles for alleviating the adverse effects of salinity on stevia remains unclear. Stevia (Stevia rebaudiana Bertoni) is one of the reputed medicinal plants due to their diterpenoid steviol glycosides (stevioside and rebaudioside A). For this reason, the current study was designed to investigate the potential of TiO₂ NPs (0, 100 and 200 mg L⁻¹) and Cs–Se NPs (0, 10 and 20 mg L⁻¹) to alleviate salt stress (0, 50 and 100 mM NaCl) in stevia. The findings of the study revealed that salinity decreased the growth and photosynthetic traits but resulted in substantial cell damage through increasing H₂O₂ and MDA content, as well as electrolyte leakage (EL). However, the application of TiO₂ NPs (100 mg L⁻¹) and Cs–Se NPs (20 mg L⁻¹) increased the growth, photosynthetic performance and activity of antioxidant enzymes, and decreased the contents of H₂O₂, MDA and EL under the saline conditions. In addition to the enhanced growth and physiological performance of the plant, the essential oil content was also increased with the treatments of TiO₂ (100 mg L⁻¹) and Cs–Se NPs (20 mg L⁻¹). In addition, the tested NPs treatments increased the concentration of stevioside (in the non-saline condition and under salinity stress) and rebaudioside A (under the salinity conditions) in stevia plants. Overall, the current findings suggest that especially 100 mg L⁻¹ TiO₂ NPs and 20 mg L⁻¹ Cs–Se could be considered as promising agents in combating high levels of salinity in the case of stevia.     

Effect of Must Hyperoxygenation on Sensory Expression and Chemical Composition of the Resulting Wines

This paper evaluates the effect of must hyperoxygenation on final wine. Lower concentrations of caftaric acid (0.29 mg·L⁻¹), coutaric acid (1.37 mg·L⁻¹) and Catechin (0.86 mg·L⁻¹) were observed in hyperoxygenated must in contrast to control must (caftaric acid 32.78 mg·L⁻¹, coutaric acid 5.01 mg·L⁻¹ and Catechin 4.45 mg·L⁻¹). In the final wine, hydroxybenzoic acids were found in higher concentrations in the control variant (gallic acid 2.58 mg·L⁻¹, protocatechuic acid 1.02 mg·L⁻¹, vanillic acid 2.05 mg·L⁻¹, syringic acid 2.10 mg·L⁻¹) than in the hyperoxygenated variant (2.01 mg·L⁻¹, 0.86 mg·L⁻¹, 0.98 mg·L⁻¹ and 1.50 mg·L⁻¹ respectively). Higher concentrations of total flavanols (2 mg·L⁻¹ in hyperoxygenated must and 21 mg·L⁻¹ in control must; 7.5 mg·L⁻¹ in hyperoxygenated wine and 19.8 mg·L⁻¹ in control wine) and polyphenols (97 mg·L⁻¹ in hyperoxygenated must and 249 mg·L⁻¹ in control must; 171 mg·L⁻¹ in hyperoxygenated wine and 240 mg·L⁻¹ in control wine) were found in both the must and the control wine. A total of 24 volatiles were determined using gas chromatography mass spectrometry. Statistical differences were achieved for isobutyl alcohol (26.33 mg·L⁻¹ in control wine and 32.84 mg·L⁻¹ in hyperoxygenated wine), or 1-propanol (7.28 mg·L⁻¹ in control wine and 8.51 mg·L⁻¹ in hyperoxygenated wine), while esters such as isoamyl acetate (1534.41 µg·L⁻¹ in control wine and 698.67 µg·L⁻¹ in hyperoxygenated wine), 1-hexyl acetate (136.32 µg·L⁻¹ in control wine and 71.67 µg·L⁻¹ in hyperoxygenated wine) and isobutyl acetate (73.88 µg·L⁻¹ in control wine and 37.27 µg·L⁻¹ in hyperoxygenated wine) had a statistically lower concentration.     

RNA-inspired intramolecular transesterification accelerates the hydrolysis of polyethylene-like polyphosphoesters

To synthesize new (bio)degradable alternatives to commodity polymers, adapting natural motives can be a promising approach. We present the synthesis and characterization of degradable polyethylene (PE)-like polyphosphoesters, which exhibit increased degradation rates due to an intra-molecular transesterification similar to RNA. An α,ω-diene monomer was synthesized in three steps starting from readily available compounds. By acyclic diene metathesis (ADMET) polymerization, PE-like polymers with molecular weights up to 38 400 g mol⁻¹ were obtained. Post-polymerization functionalization gave fully saturated and semicrystalline polymers with a precise spacing of 20 CH₂ groups between each phosphate group carrying an ethoxy hydroxyl side chain. This side chain was capable of intramolecular transesterification with the main-chain similar to RNA-hydrolysis, mimicking the 2′-OH group of ribose. Thermal properties were characterized by differential scanning calorimetry (DSC (T_mca. 85 °C)) and the crystal structure was investigated by wide-angle X-ray scattering (WAXS). Polymer films immersed in aqueous solutions at different pH values proved an accelerated degradation compared to structurally similar polyphosphoesters without pendant ethoxy hydroxyl groups. Polymer degradation proceeded also in artificial seawater (pH = 8), while the polymer was stable at physiological pH of 7.4. The degradation mechanism followed the intra-molecular “RNA-inspired” transesterification which was detected by NMR spectroscopy as well as by monitoring the hydrolysis of a polymer blend of a polyphosphoester without pendant OH-group and the RNA-inspired polymer, proving selective hydrolysis of the latter. This mechanism has been further supported by the DFT calculations. The “RNA-inspired” degradation of polymers could play an important part in accelerating the hydrolysis of polymers and plastics in natural environments, e.g. seawater.

RNA-inspired degradation of polyethylene-like polyphosphoesters accelerates the backbone hydrolysis dramatically to guarantee seawater-degradable plastics.     

Exploiting host–guest chemistry to manipulate magnetic interactions in metallosupramolecular M4L6 tetrahedral cages

Reaction of Ni(OTf)₂ with the bisbidentate quaterpyridine ligand L results in the self-assembly of a tetrahedral, paramagnetic cage [Ni^II₄L₆]⁸⁺. By selectively exchanging the bound triflate from [OTf⊂Ni^II₄L₆](OTf)₇ (1), we have been able to prepare a series of host–guest complexes that feature an encapsulated paramagnetic tetrahalometallate ion inside this paramagnetic host giving [M^IIX₄⊂Ni^II₄L₆](OTf)₆, where M^IIX₄²⁻ = MnCl₄²⁻ (2), CoCl₄²⁻ (5), CoBr₄²⁻ (6), NiCl₄²⁻ (7), and CuBr₄²⁻ (8) or [M^IIIX₄⊂Ni^II₄L₆](OTf)₇, where M^IIIX₄⁻ = FeCl₄⁻ (3) and FeBr₄⁻ (4). Triflate-to-tetrahalometallate exchange occurs in solution and can also be accomplished through single-crystal-to-single-crystal transformations. Host–guest complexes 1–8 all crystallise as homochiral racemates in monoclinic space groups, wherein the four {NiN₆} vertexes within a single Ni₄L₆ unit possess the same Δ or Λ stereochemistry. Magnetic susceptibility and magnetisation data show that the magnetic exchange between metal ions in the host [Ni^II₄] complex, and between the host and the MX₄ⁿ⁻ guest, are of comparable magnitude and antiferromagnetic in nature. Theoretically derived values for the magnetic exchange are in close agreement with experiment, revealing that large spin densities on the electronegative X-atoms of particular MX₄ⁿ⁻ guest molecules lead to stronger host–guest magnetic exchange interactions.

The tetrahedral [Ni^II₄L₆]⁸⁺ cage can reversibly bind paramagnetic MX₄^1/2− guests, inducing magnetic exchange interactions between host and guest.     

Thermal behaviour and S-O bonding state of alkaline-earth metal sulfites

The thermal behaviours of magnesium sulfite, strontium sulfite and barium sulfite were investigated in the atmospheres of argon and air. the thermal behaviours of magnesium sulfite were different from those of the other two sulfites. The oxidation of magnesium sulfite in air does not occur.The bonding state of the SO ₃ ^2– in each sulfite was compared. The SO ₃ ^2– in magnesium sulfite was coordinated through the sulfur, while those in the other sulfites were coordinated through the oxygen.It appears that the difference in thermal behaviour between magnesium sulfite and the other sulfites depend upon the difference in bonding state of the SO ₃ ^2– We wish to thank Mr. K. Takahashi of MAC Science Inc. for TG and DTA measurements, mass spectra in Ar and his valuable discussions.     

Turbulent Drag Reduction with an Ultra-High-Molecular-Weight Water-Soluble Polymer in Slick-Water Hydrofracking

Water-soluble polymers as drag reducers have been widely utilized in slick-water for fracturing shale oil and gas reservoirs. However, the low viscosity characteristics, high operating costs, and freshwater consumption of conventional friction reducers limit their practical use in deeper oil and gas reservoirs. Therefore, a high viscosity water-soluble friction reducer (HVFR), poly-(acrylamide-co-acrylic acid-co-2-acrylamido-2-methylpropanesulphonic acid), was synthesized via free radical polymerization in aqueous solution. The molecular weight, solubility, rheological behavior, and drag reduction performance of HVFR were thoroughly investigated. The results showed that the viscosity-average molecular weight of HVFR is 23.2 × 10⁶ g⋅mol⁻¹. The HVFR powder could be quickly dissolved in water within 240 s under 700 rpm. The storage modulus (G′) and loss modulus (G″) as well as viscosity of the solutions increased with an increase in polymer concentration. At a concentration of 1700 mg⋅L⁻¹, HVFR solution shows 67% viscosity retention rate after heating from 30 to 90 °C, and the viscosity retention rate of HVFR solution when increasing C_NaCl to 21,000 mg⋅L⁻¹ is 66%. HVFR exhibits significant drag reduction performance for both low viscosity and high viscosity. A maximum drag reduction of 80.2% is attained from HVFR at 400 mg⋅L⁻¹ with 5.0 mPa⋅s, and drag reduction of HVFR is 75.1% at 1700 mg⋅L⁻¹ with 30.2 mPa⋅s. These findings not only indicate the prospective use of HVFR in slick-water hydrofracking, but also shed light on the design of novel friction reducers utilized in the oil and gas industry.     

Thermodynamics Analysis and Removal of P in a P-(M)-H2O System

In order to efficiently remove phosphorus, thermodynamic equilibrium diagrams of the P-H₂O system and P-M-H₂O system (M stands for Fe, Al, Ca, Mg) were analyzed by software from Visual MINTEQ to identify the existence of phosphorus ions and metal ions as pH ranged from 1 to 14. The results showed that the phosphorus ions existed in the form of H₃PO₄, H₂PO₄⁻, HPO₄²⁻, and PO₄³⁻. Among them, H₂PO₄⁻ and HPO₄²⁻ were the main species in the acidic medium (99% at pH = 5) and alkaline medium (97.9% at pH = 10). In the P-Fe-H₂O system ((P) = 0.01 mol/L, (Fe³⁺) = 0.01 mol/L), H₂PO₄⁻ was transformed to FeHPO₄⁺ at pH = 0–7 due to the existence of Fe³⁺ and then transformed to HPO₄²⁻ at pH > 6 as the Fe³⁺ was mostly precipitated. In the P-Ca-H₂O system ((P) = 0.01 mol/L, (Ca²⁺) = 0.015 mol/L), the main species in the acidic medium was CaH₂PO₄⁺ and HPO₄²⁻, and then transformed to CaPO₄⁻ at pH > 7. In the P-Mg-H₂O system ((P) = 0.01 mol/L, (Mg²⁺) = 0.015 mol/L), the main species in the acidic medium was H₂PO₄⁻ and then transformed to MgHPO₄ at pH = 5–10, and finally transformed to MgPO₄⁻ as pH increased. The verification experiments (precipitation experiments) with single metal ions confirmed that the theoretical analysis could be used to guide the actual experiments.     

Self-Assembly of Antiferromagnetically-Coupled Copper(II) Supramolecular Architectures with Diverse Structural Complexities

The self-assembly of 2,6-diformyl-4-methylphenol (DFMP) and 1-amino-2-propanol (AP)/2-amino-1,3-propanediol (APD) in the presence of copper(II) ions results in the formation of six new supramolecular architectures containing two versatile double Schiff base ligands (H₃L and H₅L1) with one-, two-, or three-dimensional structures involving diverse nuclearities: tetranuclear [Cu₄(HL²⁻)₂(N₃)₄]·4CH₃OH·56H₂O (1) and [Cu₄(L³⁻)₂(OH)₂(H₂O)₂] (2), dinuclear [Cu₂(H₃L1²⁻)(N₃)(H₂O)(NO₃)] (3), polynuclear {[Cu₂(H₃L1²⁻)(H₂O)(BF₄)(N₃)]·H₂O}_n (4), heptanuclear [Cu₇(H₃L1²⁻)₂(O)₂(C₆H₅CO₂)₆]·6CH₃OH·44H₂O (5), and decanuclear [Cu₁₀(H₃L1²⁻)₄(O)₂(OH)₂(C₆H₅CO₂)₄] (C₆H₅CO₂)₂·20H₂O (6). X-ray studies have revealed that the basic building block in 1, 3, and 4 is comprised of two copper centers bridged through one μ-phenolate oxygen atom from HL²⁻ or H₃L1²⁻, and one μ-1,1-azido (N₃⁻) ion and in 2, 5, and 6 by μ-phenoxide oxygen of L³⁻ or H₃L1²⁻ and μ-O²⁻ or μ₃-O²⁻ ions. H-bonding involving coordinated/uncoordinated hydroxy groups of the ligands generates fascinating supramolecular architectures with 1D-single chains (1 and 6), 2D-sheets (3), and 3D-structures (4). In 5, benzoate ions display four different coordination modes, which, in our opinion, is unprecedented and constitutes a new discovery. In 1, 3, and 5, Cu(II) ions in [Cu₂] units are antiferromagnetically coupled, with J ranging from −177 to −278 cm⁻¹.     

Effects of hydroxyl radicals and oxygen species on the 4-chlorophenol degradation by photoelectrocatalytic reactions with TiO2-film electrodes

The supported nano-TiO₂ electrode was prepared by sol–gel and hydrothermal method, and the photoelectrocatalytic degradation of 4-chlorophenol (4-CP) under UV irradiation has been investigated to reveal the roles of hydroxyl radicals and dissolved oxygen species for TiO₂-assisted photocatalytic reactions. The degradation kinetics, the formation and decay of intermediates, the isotopic tracer experiments with H₂O¹⁸, the removal yield of total organic carbon and the formation of active radical species in the presence of oxygen or not were examined by HPLC, GC–MS, TOC and spin-trap ESR spectrometry. It was found that most of OH radicals in the primary hydroxylated intermediates derived from the oxidation of adsorbed H₂O or HO⁻ by photo-holes in the electrochemically assisted TiO₂ photocatalytic system. It also indicates that the enhancement in the separation efficiency of photogenerated charges by applying a positive bias (+0.5 V vs SCE) has little role in the following decomposition and mineralization of these hydroxylated intermediates in the absence of oxygen. According to above experimental results, the pathway of 4-CP photocatalytic degradation was deduced initially. Due to the combined effect of OH radicals and dissolved oxygen species, the hydroxylated 4-chlorphenol, via cis, cis-3-chloromuconic acid, was decomposed into low molecular weight acid and CO₂.