轴向进气位置对转静盘腔传热影响的分析

本文对具有不同轴向进气位置的两个转静盘腔的流动和传热进了数值模拟。这两个盘腔除进气位置不同外,具有相同的几何结构,进气流量及温度边界条件。在盘腔的核心区采用标准k-ε紊流模型,近壁区采用单方程模型。求解并分析了包括流体域,固体域的整体温度分布以及流固界面上的努塞尔数分布。     

Thermomagnetic natural convection of thermo-sensitive magnetic fluids in cubic cavity with heat generating object inside

Experiment and numerical study were conducted to investigate the heat transfer characteristics of a thermo-sensitive magnetic fluid (TSMF) filled in a cubic container with a heat generating square cylinder stick inside and under a uniform magnetic field. The experimental results show that, regardless of the heat generating object sizes, the heat transfer characteristic of the TSMF is enhanced when the magnetic field is applied to the TSMF. However, the heat transfer of the TSMF becomes poor as the size of the inside heat generating object increases because the space where the fluids go through becomes narrower and the flow is obstructed when the heat generating object size becomes bigger. Numerical simulation based on the Lattice Boltzmann method confirmed the experimental findings, and disclosed more flow details of the natural convection of the TSMF inside cavity.     

超音速等离子体炬的数值模拟

介绍了描述大气压下超音速等离子体炬内等离子体特性的磁流体力学模型，在二维近似下，对会聚-扩展型喷口等离子体炬进行了数值模拟，获得了等离子体炬内等离子体速度、温度、压力以及马赫数的分布.结果表明超音速等离子体炬内的流场特性可以分为亚音速、跨音速和超音速三个明显的区域. 关键词： 等离子体炬 磁流体力学 数值模拟     

Effect of disorder on the magnetic properties of a partially filled skutterudite

The magnetic properties of the partially filled skutterudite Eu(0.5)Co(4)Sb(12) are investigated by a model Hamiltonian, with special emphasis on the effect of ordering and disordering occupancy of the filler atoms Eu on the magnetic properties. The magnetization, magnetic specific heat and entropy are calculated within the mean-field approximation. By introducing the position disorder of the filler atoms, the critical temperature T(C) above which the magnetization disappears is changed. The magnetization curve near T(C) also becomes concave compared to the convex magnetization of the ordered system. The filler disordering also leads to a kink in the isothermal magnetization curve and a valley in the magnetic specific heat near T(C). The effective magnetic field acting on the localized spin of the filler atoms has a competitive effect with the disorder and therefore makes the valley disappear.     

Spin reorientation transition in (111) textured L10 CoPt layers

In this work, a spin reorientation transition from [001] axis to an in-plane direction occurs near Curie temperature under a small external field for (111) textured L1₀ CoPt layers in an AlN/CoPt multilayer film, indicating the dominant role of the shape anisotropy at elevated temperatures over the magnetocrystalline anisotropy. A large in-plane residual magnetization is also observed after cooling the sample from a temperature above the Curie point. The formation of magnetization during cooling is considered due to the alignment of magnetic moments along the easy axis by the small field in the spin reorientation transition temperature region. Our work reveals the importance of shape anisotropy for the formation of magnetization in the heat assisted magnetic recording process.     

Lattice Boltzmann method for nanofluid flow in a porous cavity with heat sources and magnetic field

In this article, Lattice Boltzmann method (LBM) has been applied to investigate the influences of magnetic field and heat sources on water based nanofluid natural convection inside a porous cavity with three square heat sources. Koo–Kleinstreuer–Li (KKL) model is applied to study Brownian motion impact on nanofluid flow. Effects of Rayleigh number (Ra), Darcy number (Da), nanofluid volume fraction (ϕ), and Hartmann number (Ha) on heat transfer characteristics are analyzed. From the obtained results we observe a decrease in the temperature gradient with increasing Ha; while quite the opposite effect is true with increasing Da and Ra. In the absence of magnetic field, for higher values of Darcy and Rayleigh numbers, thermal plumes are generated and the temperature gradient is enhanced. Moreover, small eddies are generated near the vertical centerline. However, in the presence of magnetic field, the number of thermal plumes decreases.     

Investigation of hypersonic flows through a cavity with sweepback angle in near space using the DSMC method

Near space has been paid more and more attentionin recent years due to its military application value.However,flow characteristics of some fundamental configurations(e.g.,the cavity) in near space have rarely been investigated due to rarefied gas effects,which make the numerical simulation methods based on continuous flow hypothesis lose validity.In this work,the direct simulation Monte Carlo(DSMC),one of the most successful particle simulation methods in treating rarefied gas dynamics,is employed to explore flow characteristics of a hypersonic cavity with sweepback angle in near space by considering a variety of cases,such as the cavity at a wide range of altitudes 20-60 km,the cavity at freestream Mach numbers of 6-20,and the cavity with a sweepback angle of 30°-90°.By analyzing the simulation results,flow characteristics are obtained and meanwhile some interesting phenomena are also found.The primary recirculation region,which occupies the most area of the cavity,causes pressure and temperature stratification due to rotational motion of fluid inside it,whereas the pressure and temperature in the secondary recirculation region,which is a small vortex and locates at the lower left corner of the cavity,change slightly due to low-speed movement of fluid inside it.With the increase of altitude,both the primary and secondary recirculation regions contract greatly and it causes them to separate.A notable finding is that rotation direction of the secondary recirculation region would be reversed at a higher altitude.The overall effect of increasing the Mach number is that the velocity,pressure,and temperature within the cavity increase uniformly.The maximum pressure nearby the trailing edge of the cavity decreases rapidly as the sweepback angle increases,whereas the influence of sweepback angle on velocity distribution and maximum temperature within the cavity is slight.     

The influence of measurement and relaxation time on flux jumps in high temperature superconductors

The influence of the magnetization and relaxation time on flux jumps in high temperature superconductors (HTSC) under varying magnetic field is studied using the fundamental electromagnetic field equations and the thermal diffusion equation; temperature variety corresponding to flux jump is also discussed. We find that for a low sweep rate of the applied magnetic field, the measurement and relaxation times can reduce flux jump and to constrain the number of flux jumps, even stabilizing the HTSC, since much heat produced by the motion of magnetic flux can transfer into coolant during the measurement and relaxation times. As high temperature superconductors are subjected to a high sweep rate or a strong pulsed magnetic field, magnetization undergoes from stability or oscillation to jump for different pause times. And the period of temperature oscillation is equal to the measurement and relaxation time.     

微酒窝通道与圆柱面凹槽通道对流传热强化分析

结合对流传热场协同原理分析了微酒窝通道、圆柱面凹槽通道及低肋通道强化传热特点,研究发现酒窝与圆柱面凹槽强化传热主要原因为:1)增加近壁区流体扰动,促进酒窝或凹槽内部流体与主流之间的传热;2)酒窝与凹槽均可扩展传热面积,进而提高总传热量。与低肋通道相比,酒窝与圆柱面凹槽仅对其附近流体的流动产生影响,而对主流流体的流动影响较小,进而阻力增加较少。提出传热量单元性能参数PEC_A作为评价指标,酒窝通道综合性能参数略高于圆柱面凹槽通道,而远高于低肋通道。     

环形HYLTE喷管耦合段及光腔区流场的数值模拟

参考传热学相关理论,估算燃烧室的传热损耗分数及相应的平衡温度,确定了主喷管的入口参数设置。在此基础上,对环形HYLTE喷管的耦合段及光腔区流场进行3维的数值模拟,给出了F原子质量分数、静温、静压的空间分布,得到了光腔区各支谱线的小信号增益系数变化曲线。将计算结果与实验结果进行比对,光谱测量结果及移动光轴实验证实了计算模型的合理性。     

Nanoparticle transport effect on magnetohydrodynamic mixed convection of electrically conductive nanofluids in micro-annuli with temperature-dependent thermophysical properties

This is a numerical investigation of nanoparticle transport effect on magnetohydrodynamic mixed convective heat transfer of electrically conductive nanofluids in micro-annuli with temperature-dependent thermophysical properties. The modified Buongiorno's non-homogeneous model is applied for the nanoparticle-fluid suspension to simulate the migration of nanoparticles into the base fluid, originating from the thermophoresis (nanoparticle migration because of temperature gradient) and Brownian motion (nanoparticle slip velocity because of concentration gradient). Due to surface roughness at the solid–fluid interface in micro-annuli, the wall surfaces are subjected to a linear slip condition to assess the non-equilibrium region near the interface. The fluid flow has been assumed to be fully developed, and the governing equations including continuity, momentum, energy, and nanoparticle transport equation are reduced to a system of ordinary differential equations, before they have been solved numerically. The results are presented with and without considering the dependency of thermophysical properties upon the temperature. It is indicated that ignoring the temperature dependency of thermophysical properties does not significantly affect the flow fields and heat transfer behavior of nanofluids, but it changes the relative magnitudes. Furthermore, in the presence of magnetic field, smaller nanoparticles are more appropriate than larger ones.     

混合记录热效应研究

在混合记录系统中，记录材料矫顽力依赖于温度，激光可用来降低矫顽力使得仅仅在激光加热的地方磁元翻转。对波导锥尖近场光斑和记录介质热响应进行了仿真研究，结果证实采用高矫顽力的磁记录材料、波导锥尖近场热辅助写的技术方案可以用来克服超顺磁极限的限制。     

Modified 6-state and 8-state potts models in magnetic field

The exact solutions for the modified 6-state and 8-state Potts models in an external magnetic field are obtained within the framework of the Kramers-Wannier transfer matrix. The explicit analytical expressions for thermodynamic quantities such as magnetization, magnetic susceptibility and specific heat are derived and analyzed at length as functions of temperature and magnetic field.     

Ar介质感应耦合等离子加热器能量转化与流动特性

对感应耦合等离子(inductively coupled plasma,ICP)加热器内能量转化过程与分布规律、 流动特性的研究和认识能够为高频等离子加热器的设计提供理论指导,同时能够为加热器向大功率、多介质、广适用方向的发展提供支撑.基于二维轴对称、层流流动和局部热力学平衡等假设条件,利用COMSOL对百千瓦级Ar介...     

One-dimensional 3-state and 4-state standard Potts models in magnetic field

The exact solutions for 3-state and 4-state standard Potts models in external magnetic field are obtained within the framework of the Kramers-Wannier transfer matrix. The explicit analytical expressions for thermodynamic quantities such as magnetization, magnetic susceptibility and specific heat are derived and analysed at length as functions of temperature and magnetic field.     

三分螺旋折流板换热器壳侧流场温度场模拟

建立了三分螺旋折流板换热器壳侧流动与传热的数学模型,对其流场、温度场和压力场的数值模拟结果在多个纵剖面和横切片上进行了展示。可见在螺旋通道的轴心和靠近壳体的折流板外缘区域局部速度较高,在折流板背流面呈现出有利于强化掺混作用的回流区,流道内几乎没有流动死区;壳侧流体温度为稳步均匀下降趋势,并呈现从圆周的外缘向轴心方向逐渐递减;而压力场则呈现明显的周期性和阶梯性。     

Biomagnetic fluid flow in a channel with stenosis

In this study, the fundamental problem of the biomagnetic (blood) fluid flow in a channel with stenosis under the influence of a steady localized magnetic field is studied. The mathematical model used for the formulation of the problem is consistent with the principles of ferrohydrodynamics (FHD) and magnetohydrodynamics (MHD). Blood is considered as a homogeneous Newtonian fluid and is treated as an electrically conducting magnetic fluid which also exhibits magnetization. For the numerical solution of the problem, which is described by a coupled, non-linear system of PDEs, with appropriate boundary conditions, the stream function-vorticity formulation is adopted. The solution is obtained by the development of an efficient pseudotransient numerical methodology using finite differences. This methodology is based on the development of a semi-implicit numerical technique, transformations and stretching of the grid and proper construction of the boundary conditions for the vorticity. Results concerning the velocity and temperature field, skin friction and rate of heat transfer indicate that the presence of the magnetic field influences the flow field considerably.     

One-dimensional ising model with next-nearest-neighbour interaction in magnetic field

The exact solution for the one-dimensional Ising model with nearest-neighbour and next-nearest-neighbour interactions in an external magnetic field is obtained within the framework of the Kramers-Wannier transfer matrix. The explicit analytical expressions for thermodynamic quantities such as magnetization, magnetic susceptibility and specific heat are derived and analyzed at length as functions of temperature, magnetic field, and the signs and values of the interaction parameters.     

Computation of demagnetizing fields and particle distribution in magnetic fluid with inhomogeneous density

A new algorithm for calculating magnetic fields in a concentrated magnetic fluid with inhomogeneous density is proposed. Inhomogeneity of the fluid is caused by magnetophoresis. In this case, the diffusion and magnetostatic parts of the problem are tightly linked together and are solved jointly. The dynamic diffusion equation is solved by the finite volume method and, to calculate the magnetic field inside the fluid, an iterative process is performed in parallel. The solution to the problem is sought in Cartesian coordinates, and the computational domain is decomposed into rectangular elements. This technique eliminates the need to solve the related boundary-value problem for magnetic fields, accelerates computations and eliminates the error caused by the finite sizes of the outer region. Formulas describing the contribution of the rectangular element to the field intensity in the case of a plane problem are given. Magnetic and concentration fields inside the magnetic fluid filling a rectangular cavity generated under the action of the uniform external filed are calculated.     

Heat transfer and fluid flow of benard-cell convection in rectangular container with free surface sensed by infrared thermography

The natural convection flow phenomena that occur inside an enclosed space are very interesting examples of complex fluid systems that may yield to analytical, empirical and numerical solutions, and many reports have looked into this basic problem. In the present study, heat transfer and fluid flow for natural convection in a horizontal rectangular container with a free surface are investigated using infrared thermography. The temperature field was measured and visualized at a gas-liquid (air — silicon oil) interface using infrared thermography. The heat transfer phenomena were also investigated by statistically analyzing the temperature data. The applicability of the infrared thermography to quantitative heat transfer measurement at the gas-liquid interface was evaluated. It is revealed that infrared thermography is effective not only in visualization of a gas-liquid interface but also in heat transfer measurement. A new heat transfer correlation is proposed for the gas-liquid interface of this flow system. The coefficient of heat transfer can be summarized by a specific heat transfer correlation formula regardless of several conditions, including container aspect ratio, fluid viscosity and fluid layer depth.