The Thermolysis of [Ru3(CO)12] in Cyclohexene: Synthesis and Charaterisation of the New Clusters [Ru3H2(CO)9(μ3-η1:η2:η1-C6H8)] and [Ru5(CO)12(μ4-η2-C6H8)(η4-C6H8)]

Thermolysis of [Ru₃(CO)₁₂] in cyclohexene for 24 h affords the complexes [Ru(CO)₃(η⁴-C₆H₈)] (1), [Ru₃H₂(CO)₉(μ₂-η¹:η²:η¹-C₆H₈)] (2), [Ru₄(CO)₁₂(μ₄-C₆H₈)] (3) [Ru₄(CO)₉(μ₄-C₆H₈)(η⁶-C₆H₆)] (4a and 4b, two isomers) and [Ru₅(CO)₁₂(μ₄-η²-C₆H₈)(η⁴-C₆H₈)] (5), where 1, 3, 4a and 4b have been previously characterised as products of the thermolysis of [Ru₃(CO)₁₂] with cyclohexa-1,3-diene. The molecular structures of the new clusters 2 and 5 were determined by single-crystal X-ray crystallography, showing that two conformational polymorphs of 5 exist in the solid state, differing in the orientation of the cyclohexa-1,3-diene ligand on a ruthenium vertex.     

Synthesis and characterization of triosmium and triruthenium pyrene clusters

The reaction between 1-pyrenecarboxaldehyde (C₁₆H₉CHO) and the labile triosmium cluster [Os₃(CO)₁₀(CH₃CN)₂] gives rise to the formation of two new compounds by competitive oxidative addition between the aldehydic group and an arene C-H bond, to afford the acyl complex [Os₃(CO)₁₀(μ-H)(μ-COC₁₆H₉)] (1) and the compound [Os₃(CO)₁₀(μ-H) (C₁₆H₈CHO)] (2), respectively. Thermolysis of [Os₃(CO)₁₀(μ-H)(μ-C₁₆H₉CO)] (1) in n-octane affords two new complexes in good yields, [Os₃(CO)₉(μ-H)₂(μ-COC₁₆H₈)] (3) and the pyryne complex [Os₃(CO)₉(μ-H)₂(μ₃-η¹:η¹:η²-C₁₆H₈)] (4).In contrast, when 1-pyrenecarboxaldehyde reacts with [Ru₃(CO)₁₂] only one product is obtained, [Ru₃(CO)₉(μ-H)₂(μ₃-η¹:η¹:η²-C₁₆H₈)] (5), a nonacarbonyl cluster bearing a pyrene ligand. All compounds were characterized by analytical and spectroscopic data, and crystal structures for 1, 2, 4 and 5 were obtained.     

Ru(II) complexes imparting N2O2 donor bis chelating ligand N,N-bis(salicylidine)-hydrazine in unusual coordination mode

The synthesis and characterization of binuclear ruthenium complexes [{(η⁶-C₆H₆)Ru}₂(μ-bsh)₂] (1), [{(η⁶-C₁₀H₁₄)Ru}₂(μ-bsh)₂] (2), [{(η⁶-C₆Me₆)Ru}₂(μ-bsh)₂] (3), and rhodium complex [{(η⁵-C₅Me₅)RhCl}₂(μ-bsh)] (4) (bsh=N,N^′-bis(salicylidine)-hydrazine dianion) are reported. The complexes have been fully characterized by analytical and spectral techniques and unusual coordination mode of the ligand H₂bsh has been confirmed by single crystal X-ray analysis of the complex 2. Structural data revealed extensive inter- and intra-molecular C-H?O and C-H?π interactions and involvement of methyl and isopropyl hydrogen from the p-cymene in hydrogen bonding.     

Synthesis and structures of the silyl bridged bis(indenyl) diruthenium complexes and a novel indenyl nonanuclear ruthenium cluster Ru9(μ6-C)(CO)14(μ3-η:η:η-C9H7)2

Thermal treatment of C₉H₇SiMe₂C₉H₇ and C₉H₇Me₂SiOSiMe₂C₉H₇ with Ru₃(CO)₁₂ in refluxing xylene gave the corresponding diruthenium complexes (E)[(η⁵-C₉H₆)Ru(CO)]₂(μ-CO)₂ [E = Me₂Si (1), Me₂SiOSiMe₂ (2)]. A desilylation product [(η⁵-C₉H₇)Ru(CO)]₂(μ-CO)₂ (3) was also obtained in the latter case. Similar treatment of C₉H₇Me₂SiSiMe₂C₉H₇ with Ru₃(CO)₁₂ gave a novel indenyl nonanuclear ruthenium cluster Ru₉(μ₆-C)(CO)₁₄(μ₃-η⁵:η²:η²-C₉H₇)₂ (5) with carbon-centered tricapped trigonal prism geometry, in addition to the diruthenium complex (Me₂SiSiMe₂)[(η⁵-C₉H₆)Ru(CO)]₂(μ-CO)₂ (4) and the desilylation product 3. Complex 4 can undergo a thermal rearrangement to form the product [(Me₂Si)(η⁵-C₉H₆)Ru(CO)₂]₂ (6). The molecular structures of 1, 2, 4, 5, and 6 were determined by X-ray diffraction.     

Synthesis and molecular structure of [Re2(μ:η-C24H18N4)(CO)6] containing the rtct-tetrakis(2-pyridyl)cyclobutandiyl ligand, derived from the reaction of [Re2(CO)8(MeCN)2] and 1,2-bis(2-pyridyl)ethene

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with trans-1,2-bis(2-pyridyl)ethene (C₁₂H₁₀N₂) at room temperature in tetrahydrofuran affords the compounds [Re₂(μ:η³-C₁₂H₁₀N₂)(CO)₈] (1) and the oxidative addition product [Re₂(μ-H)(μ:η³-C₁₂H₉N₂)(CO)₇] (2). When the reaction is carried out at temperatures of refluxing tetrahydrofuran, besides compounds 1 and 2, the oxidative addition product [Re₂(μ-H)(μ:η⁴-C₁₂H₉N₂)(CO)₆] (3), the insertion product [Re₂(μ:η⁴-C₁₂H₁₀N₂)(CO)₈] (4) and [Re₂(μ:η⁶-C₂₄H₁₈N₄)(CO)₆] (5) are obtained. Compound 5 contains the organic ligand rtct-tetrakis(2-pyridyl)cyclobutandiyl which is derived from a [2 + 2] cycloaddition of 1,2-bis(2-pyridyl)ethene mediated by its coordination to the bimetallic framework. The molecular structures of 1, 2, 4 and 5 were confirmed by X-ray crystallographic studies.     

Mono and dinuclear iridium, rhodium and ruthenium complexes containing chelating carboxylato pyrazine ligands: Synthesis, molecular structure and electrochemistry

The mononuclear complexes [(η⁵-C₅Me₅)IrCl(L¹)] (1), [(η⁵-C₅Me₅)RhCl(L¹)] (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(L¹)] (3) and [(η⁶-C₆Me₆)RuCl(L¹)] (4) have been synthesised from pyrazine-2-carboxylic acid (HL¹) and the corresponding complexes [{(η⁵-C₅Me₅)IrCl₂}₂], [{(η⁵-C₅Me₅)RhCl₂}₂], [{(η⁶-p-PrⁱC₆H₄Me)RuCl₂}₂], and [{(η⁶-C₆Me₆)RuCl₂}₂], respectively. The related dinuclear complexes [{(η⁵-C₅Me₅)IrCl}₂(μ-L²)] (5), [{(η⁵-C₅Me₅)RhCl}₂(μ-L²)] (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(μ-L²)] (7) and [{(η⁶-C₆Me₆)RuCl}₂(μ-L²)] (8) have been obtained in a similar manner from pyrazine-2,5-dicarboxylic acid (H₂L²). Compounds isomeric to the latter series, [{(η⁵-C₅Me₅)IrCl}₂(μ-L³)] (9), [{(η⁵-C₅Me₅)RhCl}₂(μ-L³)] (10), [{(p-PrⁱC₆H₄Me)RuCl}₂(μ-L³)] (11) and [{(η⁶-C₆Me₆)RuCl}₂(μ-L³)] (12), have been prepared by using pyrazine-2,3-dicarboxylic acid (H₂L³) instead of H₂L². The molecular structures of 2 and 3, determined by X-ray diffraction analysis, show the pyrazine-2-carboxylato moiety to act as an N,O-chelating ligand, while the structure analyses of 5-7, confirm that the pyrazine-2,5-dicarboxylato unit bridges two metal centres. The electrochemical behaviour of selected representatives has been studied by voltammetric techniques.     

The reaction of [H4Ru4(CO)12] with 1-penten-3-yne: dimerization and trimerization through the triple bonds

The clusters [Ru₄(μ-CO)(CO)₁₀(μ₄-η¹:η²:η¹:η²-C₅H₆)₂] (1), [Ru₄(CO)₈(μ₄-η⁴:η¹:η¹:η¹:η³-C₁₀H₁₂)(μ₃-η³:η²:η¹-C₅H₆)] (2) and [Ru₄(CO)₁₀(μ₄-η⁴:η¹:η¹:η³:η¹-C₁₅H₁₆)] (3) have been prepared from the reaction of [H₄Ru₄(CO)₁₂] with 1-penten-3-yne. This reaction is observed to proceed with dimerization and trimerization through the triple bonds. The products were characterized spectroscopically by ¹H- and ¹³C-NMR. X-ray crystal structures of compounds 1 and 2 are also described.     

Synthesis, structure, and electronic study of some group VII furoyl substituted complexes

The reaction of fulvene 1 with TlOEt in THF affords [Tl{1,2-C₅H₃(COC₄H₃O)₂}] (2) in 60% yield. Treatment of 2 with [MBr(CO)₅] (M = Mn, Re) in benzene reflux gave [Mn{η⁵-1,2-C₅H₃(COC₄H₃O)₂}(CO)₃] (3A) and [Re{η⁵-1,2-C₅H₃(COC₄H₃O)₂}(CO)₃] (3B) in 61% and 66% yields, respectively. Diacyl complexes 3A and 3B were ring-closed to the pyridazine by treating with hydrazine hydrate in methanol at room temperature. Fulvene 1 and diacyl complexes 3A and 3B have been structurally characterized by X-ray crystallography. Additionally, the electronic structure of complexes 3A and 3B and their relaxed structures have been characterized with density functional calculations. Calculated vibrational frequencies are compared with the experimental characterizations.     

Reactivity of the heteronuclear cluster RuOs3(μ-H)2(CO)13 with indene

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (1) reacts with indene under thermal activation to afford the novel clusters RuOs₃(μ-H)(CO)₉(μ-CO)₂(η⁵-C₉H₇) (3), RuOs₃(μ-H)(CO)₉(μ₃,η⁵:η²:η²-C₉H₇) (4) and Ru₂Os₃(μ-H)(CO)₁₁(μ₃,η⁵:η²:η²-C₉H₇) (5), the latter two possessing indenyl ligands in the μ₃,η⁵:η²:η² bonding mode. Cluster 5 exists as a mixture of two isomers. The inter-relationship among the clusters has also been investigated.     

Reaction of the heteronuclear cluster RuOs3(μ-H)2(CO)13 with toluene

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (4) reacts with refluxing toluene to form the clusters Ru₂Os₃(μ-H)₂(CO)₁₆ (5) RuOs₃(CO)₉(μ-CO)₂(η⁶-C₆H₅Me) (6) and Ru₂Os₃(CO)₁₂(μ-CO)(η⁶-C₆H₅Me) (7). Cluster 5 exists as a mixture of five isomers. The inter-relationship among the clusters has also been investigated.     

Mono and dinuclear rhodium, iridium and ruthenium complexes containing chelating 2,2′-bipyrimidine ligands: Synthesis, molecular structure, electrochemistry and catalytic properties

The mononuclear cations [(η⁵-C₅Me₅)RhCl(bpym)]⁺ (1), [(η⁵-C₅Me₅)IrCl(bpym)]⁺ (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(bpym)]⁺ (3) and [(η⁶-C₆Me₆)RuCl(bpym)]⁺ (4) as well as the dinuclear dications [{(η⁵-C₅Me₅)RhCl}₂(bpym)]²⁺ (5), [{(η⁵-C₅Me₅)IrCl}₂(bpym)]²⁺ (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(bpym)]²⁺ (7) and [{(η⁶-C₆Me₆)RuCl}₂(bpym)]²⁺ (8) have been synthesised from 2,2′-bipyrimidine (bpym) and the corresponding chloro complexes [(η⁵-C₅Me₅)RhCl₂]₂, [(η⁵-C₅Me₅)IrCl₂]₂, [(η⁶-PrⁱC₆H₄Me)RuCl₂]₂ and [(η⁶-C₆Me₆)RuCl₂]₂, respectively. The X-ray crystal structure analyses of [3][PF₆], [5][PF₆]₂, [6][CF₃SO₃]₂ and [7][PF₆]₂ reveal a typical piano-stool geometry around the metal centres; in the dinuclear complexes the chloro ligands attached to the two metal centres are found to be, with respect to each other, cis oriented for 5 and 6 but trans for 7. The electrochemical behaviour of 1-8 has been studied by voltammetric methods. In addition, the catalytic potential of 1-8 for transfer hydrogenation reactions in aqueous solution has been evaluated: All complexes catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide. For both the mononuclear and dinuclear series the best results were obtained (50 °C, pH 4) with rhodium complexes, giving turnover frequencies of 10.5 h⁻¹ for 1 and 19 h⁻¹ for 5.     

Synthesis and reactions of cycloheptadienyl and cyclooctadienyl tungsten complexes: X-ray crystal structure of [W(CO)2(PPh3)2(η-C7H9)][BF4]

Protonation of the cycloheptatriene complex [W(CO)₃(η⁶-C₇H₈)] with H[BF₄] · Et₂O in CH₂Cl₂ affords the cycloheptadienyl system [W(CO)₃(η⁵-C₇H₉)][BF₄] (1). Complex 1 reacts with NaI to yield [WI(CO)₃(η⁵-C₇H₉)], which is a precursor to [W(CO)₂(NCMe)₃(η³-C₇H₉)][BF₄], albeit in very low yield. The dicarbonyl derivatives [W(CO)₂L₂(η⁵-C₇H₉)]⁺ (L₂=2PPh₃, 4, or dppm, 5) were obtained, respectively, by H[BF₄] · Et₂O protonation of [W(CO)₂(PPh₃)(η⁶-C₇H₈)] in the presence of PPh₃ and reaction of 1 with dppm. The X-ray crystal structure of 4 (as a 1/2 CH₂Cl₂ solvate) reveals that the two PPh₃ ligands are mutually trans and are located beneath the central dienyl carbon and the centre of the edge bridge. The first examples of cyclooctadienyl tungsten complexes [WBr(CO)₂(NCMe)₂(1-3-η:5,6-C₈H₁₁)] (6) and [WBr(CO)₂(NCMe)₂(1-3-η:4,5-C₈H₁₁)] (7) were synthesised by reaction of [W(CO)₃(NCR)₃] (R=Me or Prⁿ) with 3-Br-1,5-cod/6-Br-1,4-cod or 5-Br-1,3-cod/3-Br-1,4-cod (cod=cyclooctadiene), respectively. Complexes 6 and 7 are precursors to the pentahapto-bonded cyclooctadienyl tungsten species [W(CO)₂(dppm)(1-3:5,6-η-C₈H₁₁)][BF₄] and [W(CO)₂(dppe)(1-5-η-C₈H₁₁)][BF₄] · CH₂Cl₂.     

Centrosymmetric [Mn2(CO)6(μ-thpymS)2] (thpymS = tetrahydropyrimidine-2-thionato) as a synthon to mixed-metal clusters

Reaction of [Mn₂(CO)₉(NCMe)] with tetrahydropyrimidine-2-thione (thpymSH) at 25 °C furnishes the mono- and dinuclear complexes [Mn(CO)₄(κ¹:η¹-SCNHC₃H₆NCO)] (2) and [Mn₂(CO)₆(μ-thpymS)₂] (1), respectively. Carbon-nitrogen coupling is observed in compound 2 resulting in the formation of κ¹:η¹-SCNHC₃H₆NCO ligand while compound 1 adopts a centrosymmetric structure. Reaction of 1 with [Os₃(CO)₁₀(NCMe)₂] at 80 °C affords the mixed Mn-Os cluster [MnOs₃(CO)₁₃(μ₃-thpymS)] (3) which possesses a butterfly skeleton of four metal atoms whereas with Ru₃(CO)₁₂ at 110 °C gives the mixed Mn-Ru complex [MnRu₃(CO)₁₄(μ₄-S)(κ¹:η¹-thpym)] (4). In contrast, treatment of 1 with Fe₃(CO)₁₂ at 80 °C furnishes two triiron complexes [Fe₃(CO)₉(μ₃-S)(μ₃-κ¹:η¹-C₄H₆N₂)] (5) and [Fe₃(CO)₈(μ₃-S)₂(η¹-C₄H₈N₂)] (6). The former also results from the direct reaction of thpymSH with Fe₃(CO)₁₂ and reacts with H₂S to afford 6. The molecular structures of all these new complexes have been determined by X-ray diffraction studies.     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Synthesis and property of BrCCH- and BrCCBr-coordinated tetrairon clusters

The reaction of (η⁵-C₅H₄Me)₄Fe₄(HCCH)₂ (1) with 1 equiv. of N-bromosuccinimide (NBS) gives the one-electron oxidized form in 83% yield. Further treatment of [1]⁺ with NBS results in the stepwise bromination of four acetylenic protons to give [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCCBr)]⁺ ([2]⁺), [(η⁵-C₅H₄Me)₄Fe₄(HCCBr)₂]⁺ ([3a]⁺), [(η⁵-C₅H₄Me)₄Fe₄(HCCBr)(BrCCBr)]⁺ ([4]⁺), and [(η⁵-C₅H₄Me)₄Fe₄(BrCCBr)₂]⁺ ([5]⁺) in moderate yields, with the isomer of [3a]⁺, [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(BrCCBr)]⁺ ([3b]⁺), formed as a minor product. These compounds are characterized by analytical and spectroscopic techniques, and the molecular structures of [2](PF₆), [4](TFPB), and [5](TFPB) are established by X-ray diffraction analysis [TFPB = tetrakis{bis(3,5-trifluoromethyl)phenyl}borate]. The compounds are confirmed to retain the butterfly core of four iron atoms as in [1](TFPB). The bromoacetylene part in [2]⁺ exhibits high reactivity toward various nucleophiles: Cluster[2]⁺ is moisture-sensitive and is converted to a mixture of [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(μ₃-CH)(μ₃-CO)]⁺ ([6]⁺) and [1]⁺. Reactions of [2]⁺ with ZnR₂ (R = Me, Et) give [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-R)]⁺ in good yields (R = Me ([9]⁺, 88%), Et ([10]⁺, 91%)). Accordingly, treatment of [2]⁺ with HC CMgBr and LiS^pTol leads to the introduction of the ethynyl and thiolate groups to give [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-CCH)]⁺ ([11]⁺, 95%) and [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-S^pTol)]⁺ ([12]⁺, 78%), respectively. Substitution of the bromo group in [2]⁺ with pyridine affords [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-Py)]²⁺ ([13]²⁺) in 90% yield. The reaction with 4,4′-bipyridyl (bpy) requires the severer conditions (70 °C, 2 days), probably due to the relative low basicity of bpy, giving [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-bpy)]²⁺ ([14]²⁺) in 54% yield. The substitution reaction with 4,4′-bipyridyl is strongly accelerated by treatment with silver salt to give [14]²⁺ in 90% yield. The products derived from [2]⁺ and nucleophiles are unequivocally determined by elemental, spectroscopic, and X-ray diffraction analyses.     

Syntheses and characterization of [(η-C6Me6)Ru(μ-N3)(X)]2 (X = N3 and Cl) complexes and their reactions towards mono- and bidentate ligands

The reaction of the complex [{(η⁶-C₆Me₆)Ru(μ-Cl)Cl}₂] 1 with sodium azide ligand gave two new dimers of the composition [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2 and [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3, depending upon the reaction conditions. Complex 3 with excess of sodium azide in ethanol yielded complex 2. These complexes undergo substitution reactions with monodentate ligands to yield monomeric complexes of the type [(η⁶-C₆Me₆)Ru(X)(N₃)(L)] {X = N₃, Cl, L = PPh₃ (4a, 9a); PMe₂Ph (4b, 9b); AsPh₃ (4c, 9c); X = N₃, L = pyrazole (Hpz) (5a); 3-methylpyrazole (3-Hmpz) (5b) and 3,5-dimethyl-pyrazole (3,5-Hdmpz) (5c)}. Complexes 2 and 3 also react with bidentate ligands to give bridging complexes of the type [{(η⁶-C₆Me₆)Ru(N₃)(X)]₂(μ-L)} {X = N₃, Cl, L = 1,2-bis(diphenylphosphino)methane (dppm) (6, 10); 1,2-bis(diphenylphosphino)ethane (dppe) (7, 11); 1,2-bis(diphenylphosphino)propane (dppp) (8, 12); X = Cl, L = 4,4-bipyridine (4,4′-bipy) (13)}. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as by analytical data.The molecular structures of the representative complexes [{(η⁶-C₆Me₆)Ru(μ-N₃)(N₃)}₂] 2, [{(η⁶-C₆Me₆)Ru(μ-N₃)Cl}₂] 3,[(η⁶-C₆Me₆)Ru(N₃)₂(PPh₃)] 4a and [{(η⁶-C₆Me₆)Ru(N₃)₂}₂ (μ-dppm)] 6 were established by single crystal X-ray diffraction studies.     

The activation and transformations of acenaphthylene by osmium carbonyl cluster complexes

The reaction of Os₃(CO)₁₀(NCMe)₂ (1) with an excess of acenaphthylene at room temperature provided the complex Os₃(CO)₁₀(μ-H)(μ-η²-C₁₂H₇) (2). Compound 2 contains a σ-π coordinated acenaphthyl ligand bridging an edge of the cluster. Compound 2 was converted to the complex Os₃(CO)₉(μ-H)₂(μ₃-η²-C₁₂H₆) (3) when heated to reflux in a cyclohexane solution. Compound 3 contains a triply bridging acenaphthyne ligand. Compound 3 reacts with acenaphthylene again at 160 °C to yield four new cluster complexes: Os₄(CO)₁₂(μ₄-η²:η²-C₁₂H₆) (4); Os₂(CO)₆(μ-η⁴-C₂₄H₁₂) (5); Os₃(CO)₉(μ-H)(μ₃-η⁴-C₂₄H₁₃) (6); and Os₂(CO)₅(μ-η⁴-C₂₄H₁₂)(η²-C₁₂H₈) (7). All compounds were characterized crystallographically. Compound 4 is a butterfly cluster of four osmium atoms bridged by a single acenaphthyne ligand. Compounds 5 and 7 are dinuclear osmium clusters containing metallacycles formed by the coupling of two equivalents of acenaphthyne. Compound 6 is a triosmium cluster formed by the coupling of an acenaphthyne ligand to an acenapthyl group that is coordinated to the cluster through a combination of σ and π-bonding.     

Reactions of benzothiazolide triosmium clusters with tetramethylthiourea

The valence saturated benzothiazolide triosmium cluster [Os₃(CO)₁₀(μ-η²-C₇H₄NS)(μ-H)] (1) reacts with tetramethylthiourea in refluxing toluene to give [Os₃(CO)₈(μ-η²-C₇H₄NS)(η²-SCNMe₂NMeCH₂)(μ-H)₂] (5), which exists as a mixture of two isomers in solution, whereas the electron-deficient cluster [Os₃(CO)₉(μ₃-η²-C₇H₄NS)(μ-H)] (2) reacts with tetramethylthiourea in refluxing cyclohexane to give two new compounds [Os₃(CO)₈(μ-η²-C₇H₄NS)(η²-SCNMe₂NMeCH₂)(μ-H)₂] (6) and [Os₃(CO)₉(μ-η²-C₇H₄NS)(η¹-SC(NMe₂)₂)(μ-H)] (7). In contrast, the reaction of [Os₃(CO)₉(μ₃-η²-C₇H₃(2-CH₃)NS)(μ-H)](3) with tetramethylthiourea in refluxing cyclohexane at 81 °C, gives only [Os₃(CO)₉(μ-η²-C₇H₃(2-CH₃)NS)(η¹-SC(NMe₂)₂)(μ-H)] (8) in 15% yield. Compound 7 converts into 6 in refluxing toluene whereas a similar thermolysis of 8 results non-specific decomposition. All the compounds have been characterized by elemental analysis, IR, ¹H NMR and mass spectroscopic data together with single crystal X-ray diffraction analysis for 5 and 7. Both compounds 5 and 6 contain a cyclometallated tetramethylthiourea ligand which is chelating at the rear osmium atom and are structurally very similar. In 5, the benzothiazolide ligand is coordinated to Os₃ triangle via the nitrogen lone pair and C(2) carbon atom of the heterocyclic ring whereas in 6 the ligand is coordinated to the Os₃ triangle via the nitrogen lone pair and the C(7) carbon atom of carbocyclic ring. In 7 and 8, the tetramethylthiourea ligand is coordinated at an equatorial site of the osmium atom which is also bound to the nitrogen atom of the benzothiazolide ligand.     

Half sandwich platinum group metal complexes containing tetradentate N-donor ligand bearing two pyrazolyl-pyridine units linked by an aromatic spacer

Reaction of the bis-bidentate ligand, 1,3-bis((3-(pyridin-2-yl)-1H-pyrazol-1-yl)methyl)benzene (NN∩NN), containing two chelating pyrazolyl-pyridine units connected by an aromatic spacer with platinum group metal complexes results in a series of cationic binuclear complexes, [(η⁶-arene)₂Ru₂(NN∩NN)Cl₂]²⁺ (arene = C₆H₆, 1; p-ⁱPrC₆H₄Me, 2; C₆Me₆, 3), [(η⁵-C₅Me₅)₂M₂(NN∩NN)Cl₂]²⁺ (M = Rh, 4; Ir, 5), [(η⁵-C₅H₅)₂M₂(NN∩NN)(PPh₃)₂]²⁺ (M = Ru, 6; Os, 7), [(η⁵-C₅Me₅)₂Ru₂(NN∩NN)(PPh₃)₂]²⁺ (8) and [(η⁵-C₉H₇)₂Ru₂(NN∩NN)(PPh₃)₂]²⁺ (9). All these complexes have been isolated as their hexafluorophosphate salts and fully characterized by use of a combination of NMR spectroscopy, IR spectroscopy and mass spectrometry. The solid state structures of three complexes, [2][PF₆]₂, [4][PF₆]₂ and [6][PF₆]₂, has been determined by X-ray crystallographic studies.     

Study of half sandwich platinum group metal complexes containing tetradentate N-donor ligand bearing two di-pyridylamine units linked by an aromatic spacer

A general approach for the preparation of dinuclear η⁵- and η⁶-cyclic hydrocarbon platinum group metal complexes, viz. [(η⁶-arene)₂Ru₂(NN∩NN)Cl₂]²⁺ (arene = C₆H₆, 1; p-ⁱPrC₆H₄Me, 2; C₆Me₆, 3), [(η⁵-C₅Me₅)₂M₂(NN∩NN)Cl₂]²⁺ (M = Rh, 4; Ir, 5), [(η⁵-C₅H₅)₂M₂(NN∩NN)(PPh₃)₂]²⁺ (M = Ru, 6; Os, 7), [(η⁵-C₅Me₅)₂Ru₂(NN∩NN)(PPh₃)₂]²⁺ (8) and [(η⁵-C₉H₇)₂Ru₂(NN∩NN)(PPh₃)₂]²⁺ (9), bearing the bis-bidentate ligand 1,2-bis(di-2-pyridylaminomethyl)benzene (NN∩NN), which contains two chelating di-pyridylamine units connected by an aromatic spacer, is reported. The cationic dinuclear complexes have been isolated as their hexafluorophosphate or hexafluoroantimonate salts and characterized by use of a combination of NMR, IR and UV-vis spectroscopic methods and by mass spectrometry. The solid state structure of three derivatives, [2][SbF₆]₂, [3][PF₆]₂ and [4][PF₆]₂, has been determined by X-ray structure analysis.