弹性地基上间断中厚矩形板的非线性静力分析

研究弹性地基上带传力杆的间断中厚矩形板的非线性静力特性。荷载在传力杆中的传递由竖向弹簧模拟,其弹簧刚度取决于传力杆的特性以及杆与板间的相互作用。根据能量变分原理,考虑地基耦合效应,建立了双参数地基上带传力杆的间断矩形中厚板的非线性静力控制方程。构造出一组满足所有边界条件的试探函数,应用伽辽金法对该组非线性方程进行求解。数值算例中,讨论了传力杆参数、板的结构参数及地基参数对弹性地基上间断矩形中厚板的非线性静力特性的影响。     

非线性Winkler地基上矩形薄板在移动荷载作用下的非线性动力分析

分析了非线性Winkler地基上矩形薄板在车辆移动荷载作用下的非线性动力特性。考虑地基反力的存在,基于Hamilton能量变分原理,建立了车辆、板、地基耦合系统非线性振动的控制微分方程;并将方程进行了量纲归一化处理,构造了满足周边自由矩形薄板全部边界条件的试探函数;运用伽辽金法和谐波平衡法对耦合系统控制方程进行了求解,讨论了板参数、地基参数、车辆系统参数等变化对耦合系统板振动幅频曲线的影响。结果表明:该耦合系统振动的频率都随板振幅的增大而增大;当板振动的幅值一定时,系统振动频率随着板厚、地基反应模量、车辆运行速度、车体刚度的增大而增大,但随着车体质量的增大而减小。因此,适当增加地基的反应模量可优化地基板的振动,并且从行车舒适性角度考虑,适当控制车速和车体刚度是有益的。     

弹性半空间地基上预应力中厚矩形板的弯曲

基于Reissner-Mindlin一阶剪切变形理论,讨论在预加面内机械荷载或预加温度场作用下,弹性半空间地基上四边自由中厚矩形板的弯曲问题。把地基看作三维弹性半空间体,考虑地基变形的衰减。用一组数学上完备的二元多项式作为位形函数,采用pb-2 Rayleigh-Ritz法求得四边自由中厚矩形板的挠度和弯矩,并讨论了初应力对板的挠度和弯矩的影响。     

弹性半空间地基上预应力中厚矩形板的横向振动

基于Reissner-Mindlin一阶剪切变形理论,讨论在预加面内机械荷载作用下,弹性半空间地基上四边自由中厚矩形板的横向振动问题。把地基看作三维弹性半空间体,考虑地基变形的衰减。用一组数学上完备的二元多项式作为位形函数,采用pb-2 Rayleigh-Ritz法求得四边自由中厚矩形板的自振频率和在横向简谐荷载作用下的动力响应。讨论了板的长宽比、宽厚比及弹性地基和板的相对刚度对板的自振频率的影响。     

功能梯度矩形板的非线性自由振动

研究了功能梯度矩形薄板的非线性自由振动问题.采用幂律分布规律描述功能梯度材料沿厚度的梯度性质,基于von Kámán理论,建立了功能梯度薄板的非线性振动控制方程.应用Bubnov-Galerkin法得到了功能梯度矩形薄板的单模态非线性振动的时域常微分方程,借助其势能函数分析了系统的周期振动状态.采用Lindstedt-Poincaré法和Runge-Kutta法分别获得了功能梯度矩形薄板单模态非线性周期振动的摄动解和数值解.研究表明:功能梯度薄板非线性振动控制方程中包含表征拉弯耦合效应的控制项,这导致其常微分方程中出现二次项;系统振幅在板横向的正负两个方向上是不相等的,其振动存在关于板中面的不对称性.     

非均匀Winkler弹性地基上变厚度矩形板自由振动的DTM求解

针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法（DTM）,研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。     

非线性弹性地基上矩形薄板受双频参数激励作用的非线性振动

应用弹性理论和Galerkin方法建立小挠度矩形薄板在非线性弹性地基上受两对均布纵向简谐激励作用的双模态非线性动力学方程。应用多尺度法求得系统满足双频主参数共振条件的一次近似解和对应的定常解,并进行了数值计算。分析了阻尼系数、地基系数、几何参数等对系统双频主参数共振的影响。     

弹性地基上矩形加肋板自由振动分析的无网格法

应用移动最小二乘无网格法研究弹性地基上矩形加肋板的自由振动问题。假设弹性地基与加肋板紧密接触,以弹簧模拟弹性地基,将弹性地基上的加肋板视为板与肋条组合的结构。基于一阶剪切理论,用无网格伽辽金法推出了板和肋条各自的动能与势能;再通过位移协调条件将两者的能量叠加,得到了弹性地基上整个加肋板的动能与势能。由Hamilton原理导出了弹性地基上加肋板自由振动的控制方程。采用完全转换法引入边界条件,求解自由振动方程,并编制了计算程序,给出了算例。将算例与ABAQUS有限元解及已有文献结果进行了比较分析,其相对误差均在5%以内,验证了该方法计算弹性地基上矩形加肋板结构自振频率的有效性。     

弹性地基上多孔功能梯度材料矩形板的自由振动与临界屈曲载荷分析

多孔功能梯度材料(FGM)构件的特性与孔隙率和孔隙分布形式有密切关系。本文基于经典板理论,考虑不同孔隙分布形式时修正的混合率模型,研究Winkler弹性地基上四边受压多孔FGM矩形板的自由振动与临界屈曲载荷特性。首先利用Hamilton原理和物理中面的定义推导Winkler弹性地基上四边受压多孔FGM矩形板自由振动的控制微分方程并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程和边界条件进行变换,得到计算无量纲固有频率和临界屈曲载荷的代数特征方程。将问题退化为孔隙率为零时的FGM矩形板并与已有文献进行对比以验证其有效性。最后计算并分析了梯度指数、孔隙率、地基刚度系数、长宽比、四边受压载荷及边界条件对多孔FGM矩形板无量纲固有频率的影响以及各参数对无量纲临界屈曲载荷的影响。     

非均匀Winkler弹性地基上变厚度矩形板自由振动的DTM求解

针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法(DTM),研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。     

NONLINEAR VIBRATION FOR MODERATE THICKNESS RECTANGULAR CRACKED PLATES INCLUDING COUPLED EFFECT OF ELASTIC FOUNDATION

IntroductionThe moderate thickness plates on elastic foundation are a kind of important structure instructural engineering. The mechanic characters of the plates on elastic foundation withdifferent boundary conditions have been received considerable atten…     

Free vibration analysis of moderately thick functionally graded plates on elastic foundation using the extended Kantorovich method

Free vibration analysis of moderately thick rectangular FG plates on elastic foundation with various combinations of simply supported and clamped boundary conditions are studied. Winkler model is considered to describe the reaction of elastic foundation on the plate. Governing equations of motion are obtained based on the Mindlin plate theory. A semi-analytical solution is presented for the governing equations using the extended Kantorovich method together with infinite power series solution. Results are compared and validated with available results in the literature. Effects of elastic foundation, boundary conditions, material, and geometrical parameters on natural frequencies of the FG plates are investigated.     

基于无网格法的非均匀弹性地基上变厚度加筋板弯曲与固有频率分析

采用基于移动最小二乘近似的无网格方法并结合一阶剪切变形理论,分析了非均匀弹性地基上变厚度加筋板的弯曲和固有频率问题.首先,用节点对变厚度板和筋条分别进行离散,导出变厚度板和筋条的势能;其次,利用筋条与变厚度板之间的位移协调条件将筋条的节点参数转换为板的节点参数,再将两者的势能进行叠加得到变厚度加筋板的总势能,并根据能量法得到其动能;最后,利用最小势能原理及Hamilton原理分别得到弯曲控制方程与振动控制方程.由于采用的方法不能直接施加位移边界,故采用完全转换法处理位移边界.本文先计算变厚度板的弯曲及非均匀弹性地基板的固有频率,与文献对比验证方法的有效性;然后对非均匀弹性地基上变厚度加筋板弯曲与 自由振动进行了计算,并将计算结果与有限元结果进行了对比.结果表明,本文方法计算所得结果与文献解及有限元结果之间的误差均小于5％,验证了该方法在计算非均匀弹性地基上变厚度加筋板弯曲与固有频率问题的有效性.     

Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method

In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.     

Thermoelastic buckling behavior of thick functionally graded rectangular plates

Thermoelastic buckling behavior of thick rectangular plate made of functionally graded materials is investigated in this article. The material properties of the plate are assumed to vary continuously through the thickness of the plate according to a power-law distribution. Three types of thermal loading as uniform temperature raise, nonlinear and linear temperature distribution through the thickness of plate are considered. The coupled governing stability equations are derived based on the Reddy’s higher-order shear deformation plate theory using the energy method. The resulted stability equations are decoupled and solved analytically for the functionally graded rectangular plates with two opposite edges simply supported subjected to different types of thermal loading. A comparison of the present results with those available in the literature is carried out to establish the accuracy of the presented analytical method. The influences of power of functionally graded material, plate thickness, aspect ratio, thermal loading conditions and boundary conditions on the critical buckling temperature of aluminum/alumina functionally graded rectangular plates are investigated and discussed in detail. The critical buckling temperatures of thick functionally graded rectangular plates with various boundary conditions are reported for the first time and can be served as benchmark results for researchers to validate their numerical and analytical methods in the future.     

NON-AXISYMMETRIC MIXED BOUNDARY VALUE PROBLEM FOR DYNAMIC INTERACTION BETWEEN SATURATED POROUS FOUNDATION AND RECTANGULAR PLATE$^{\bf 1)}$

在同一界面的不同区域具有多种边界条件, 称之为混合边界, 这是一个熟知的力学问题. 对这类问题进行精确分析时, 必须要进行混合边值问题的求解. 而对于一般的三维非轴对称情形, 混合边值问题的求解往往存在数学困难. 本文利用Hilbert定理和双重Fourier变换, 给出了一种求解三维非轴对称混合边值问题的解析方法, 利用该方法对具有混合透水边界的饱和多孔地基上矩形板的振动弯曲进行了解析研究(板与地基接触面为不透水边界, 其余为透水边界). 首先, 基于Kirchhoff理论和Biot多孔介质理论建立矩形板与饱和多孔地基的动力控制方程, 进行耦合求解. 针对板土接触面和非接触面的混合边值问题, 采用双重Fourier变换构造出两对二维对偶积分方程, 以接触应力和接触面孔隙压力为基本未知量, 用Jacobi正交多项式将未知量展开, 再利用Schmidt法对二维对偶积分方程完成求解, 最终推导出板土系统在动力作用下的位移和应力解析式. 通过将本文计算模型退化为单一弹性地基, 与已有研究结果进行对比, 验证了本文方法的正确性和有效性. 最后, 通过数值算例, 对饱和多孔地基上矩形板的动力响应及参数影响做出分析和讨论. 此外, 本文提出的解析法具有一般性, 可广泛应用于复杂接触问题和多场耦合问题的求解.     

Exact characteristic equations for some of classical boundary conditions of vibrating moderately thick rectangular plates

The dimensionless equations of motion are derived based on the Mindlin plate theory to study the transverse vibration of thick rectangular plates without further usage of any approximate method. The exact closed form characteristic equations are given within the validity of the Mindlin plate theory for plates having two opposite sides simply supported. The six distinct cases considered involve all possible combinations of classical boundary conditions at the other two sides of rectangular plates. Accurate eigenfrequency parameters are presented for a wide range of aspect ratio η and thickness ratio δ for each case. The three dimensional deformed mode shapes together with their associated contour plots obtained from the exact closed form eigenfunctions are also presented. Finally, the effect of boundary conditions, aspect ratios and thickness ratios on the eigenfrequency parameters and vibratory behavior of each distinct cases are studied in detail. It is believed that in the present work, the exact closed form characteristic equations and their associated eigenfunctions, except for the plates with four edges simply supported, for the rest of considered six cases are obtained for the first time.     

Nonlinear bending behavior of orthotropic Mindlin plate resting on orthotropic Pasternak foundation using GDQM

Rectangular plates resting on elastic foundations are operational activities of large transportation aircraft on runways, footings, foundation of spillway dam, civil building in cold regions, and bridge structures. Hence, in the present work, nonlinear bending analysis of embedded rectangular plates is investigated based on orthotropic Mindlin plate theory. The elastic medium is simulated by orthotropic Pasternak foundation. Adopting the nonlinear strain–displacement relation, the governing equations are derived based on energy method and Hamilton’s principle. The generalized differential quadrature method is performed for the case when all four ends are clamped supported. The influences of the plate thickness, shear-locking, elastic medium constants, and applied force on the nonlinear bending of the rectangular plate are studied. Results indicate that increasing the plate thickness decreases the deflection of the plate. It is also observed that increasing the applied force increases the deflection of the plate. Furthermore, considering elastic medium decreases deflection of the plate, and the effect of the Pasternak-type is higher than the Winkler-type on the maximum deflection of the plate. Also, it is found that the present results have good agreement with previous researches.