Temperature-induced phase transition of poly(N,N-dimethylaminoethyl methacrylate-co-acrylamide)

Copolymers of N,N-dimethylaminoethyl methacrylate (DMAEMA) and acrylamide (AAm) were prepared to demonstrate a temperature-induced phase transition. Poly DMAEMA has a lower critical solution temperature (LCST) around 50°C in water. With copolymerization of DMAEMA with AAm, the LCST shifts to the lower temperature was observed, probably due to the formation of hydrogen bonds between amide and N,N-dimethylamino groups. FT-IR studies clearly show the formation of hydrogen bonds which protect N,N-dimethylamino groups from exposure to water and result in a hydrophobic contribution to the LCST. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 595–598, 1997     

Novel cationic pH-responsive poly(N,N-dimethylaminoethyl methacrylate) microcapsules prepared by a microfluidic technique

Novel monodisperse cationic pH-responsive microcapsules are successfully prepared using oil-in-water-in-oil double emulsions as templates by a microfluidic technique in this study. With the use of a double photo-initiation system and the adjustment of pH value of the monomer solution, cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDM) microcapsules with good sphericity and monodispersity can be effectively fabricated. The obtained microcapsule membranes swell at low pH due to the protonation of N(CH(3))(2) groups in the cross-linked PDM networks. The effects of various preparation parameters, such as pH of the aqueous monomer fluid, concentration of cross-linker, concentration of monomer N,N-dimethylaminoethyl methacrylate (DM) and addition of copolymeric monomer acrylamide (AAm), on the pH-responsive swelling characteristics of PDM microcapsules are systematically studied. The results show that, when the PDM microcapsules are prepared at high pH and with low cross-linking density and low DM monomer concentration, they exhibit high pH-responsive swelling ratios. The addition of AAm in the preparation decreases the swelling ratios of PDM microcapsules. The external temperature has hardly any influence on the swelling ratios of PDM microcapsules when the external pH is less than 7.4. The prepared PDM microcapsules with both biocompatibility and cationic pH-responsive properties are of great potential as drug delivery carriers for tumor therapy. Moreover, the fabrication methodology and results in this study provide valuable guidance for preparation of core-shell microcapsules via free radical polymerization based on synergistic effects of interfacial initiation and initiation in a confined space.     

Kinetics of the photo-graft copolymerization of methoxypolyethyleneglycol methacrylate and N,N-dimethylaminoethyl methacrylate to dithiocarbamated poly(vinyl chloride)

Photo-graft copolymerization of methoxypolyethyleneglycol methacrylate (SM) and N,N-dimethylaminoethyl methacrylate (DAEM) to dithiocarbamated poly(vinyl chloride) (DTC-PVC) in cyclohexanone was carried out and the change of concentration of SM and DAEM with time were followed by thin-layer chromatography. Also, the change of concentration of DTC-groups during the photolysis of DTC-PVC was measured spectrophotometrically to determine the quantum yield of the photolysis.Simulation of the photo-graft copolymerization was carried out by substituting the quantum yield of the photolysis and other kinetic parameters such as monomer reactivity ratios, polymerization rate constants and φ factors, which were obtained separately, into equations for the photo-copolymerization. Agreement between experiment and calculation was very good.Moreover, experimental results concerning the degree of graft-polymerization and molecular weight change during the photo-copolymerization are discussed.     

Chiral nematic phase formation by aqueous suspensions of cellulose nanocrystals prepared by oxidation with ammonium persulfate

There is continuing interest in the growing family of nanocellulosic materials prepared from plant cell wall material. While most of the research on cellulose nanocrystals has focused on the product of sulfuric acid hydrolysis stabilized by surface sulfate half-esters, cellulose nanocrystals with surface carboxyl groups have also been prepared by oxidation of lignocellulosic materials with ammonium persulfate. The major difference is that the persulfate oxidation leads to nanocrystals stabilized by surface carboxyl groups. Some properties of cellulose nanocrystals from cotton and wood, prepared by persulfate oxidation, are compared with those observed for nanocrystals prepared by sulfuric acid hydrolysis. Evidence from polarized light microscopy showed that the nanocrystal suspensions prepared by persulfate oxidation also form chiral nematic ordered phases in water.     

pH-thermosensitive behavior of N,N-dimethylaminoethyl methacrylate (Co)polymers with N-vinylcaprolactam

The effect of acidity of a medium on the phase separation temperature and the intensity of light scattering for dispersions produced by heating of aqueous solutions of N,N-dimethylaminoethyl methacrylate, N-vinylcaprolactam, and their copolymers has been studied. It has been demonstrated that the phase separation temperature and the turbidity of polyvinylcaprolactam (and vinylcaprolactam-enriched copolymers) solutions are pH-independent. Poly(N,N-dimethylaminoethyl methacrylate) (and N,N-dimethylaminoethyl methacrylateenriched copolymers) exhibits temperature sensitivity only in the alkaline region, and the phase separation temperature and turbidity versus pH plots are described by curves with maxima. The addition of sodium dodecyl sulfate to polymer solutions in the general case causes an increase in the phase separation temperature. However, if positive charges occur on macromolecules (in initial solutions of poly(N,N-dimethylaminoethyl methacrylate) or acidified solutions of polyvinylcaprolactam), the increase in the phase separation temperature is preceded by its decrease owing to the electrostatic interaction of surfactant anions with cationic centers. As acid is introduced into the H₂O-sodium dodecyl sulfate-polyvinylcaprolactam ternary system, the phase separation temperature of the polyvinylcaprolactam-dodecyl sulfate complex is decreased.     

Synthesis, rapid responsive thickening, and self-assembly of brush copolymer poly(ethylene oxide)-graft-poly(N,N-dimethylaminoethyl methacrylate) in aqueous solutions

Double hydrophilic brush copolymer poly(ethylene oxide)-graft-poly(N,N-dimethylaminoethyl methacrylate) (PEO-g-PDMAEMA) was successfully prepared via atom transfer radical polymerization (ATRP). We investigated the pH/thermoresponsive behaviors of PEO-g-PDMAEMA brush-shaped copolymer concentrated aqueous solutions by rheology. The observed LCST strongly decreased with increasing pH of the solutions, which was lower than that of linear block copolymer for different pH, indicating rapid thermoresponsiveness of the brush PDMAEMA chains. An unexpected shear thickening behavior was observed and could be tuned by the pH, resulting from the mobile nature and tractive force of the densely grafted hydrophobic chains of PDMAEMA at high pH. Self-assembly of the brush copolymer in a different pH and ionic strength environment was studied by transmission electron microscopy. A wormlike cylinder structure was formed at low pH. Fractals were observed for the brush copolymer aqueous solution in the presence of NaCl. The results showed that by adjusting the pH and NaCl concentration of the dispersions fractal aggregates with different topology were obtained. The observations reported here can supply a better understanding of the molecular self-assembling nature and be used to develop responsive materials with better performance.     

Poly(N,N-dimethylaminoethyl methacrylate) grafted poly(vinyl chloride)s synthesized via ATRP process and their membranes for dye separation

To functionalize poly(vinyl chloride)(PVC) for various applications, monomers containing tertiary amine group are incorporated into PVC via atom transfer radical polymerization(ATRP) initiated by the labile chlorines in their backbones. The kinetics of synthesis was carefully investigated, and it is proven that the grafting polymerization process can be effectively controlled by regulating the reaction time. The membranes are fabricated using PVC and copolymers by non-solvent induced phase separation(NIPS) process. The hydrophilicity and pore structure of copolymer membranes were enhanced as well, these membranes are endowed with positive charge. When PDMA%(i.e., the PDMA weight percentage in copolymer) is 31.1%, the flux and Victoria blue B rejection are 26.0 L?m?2?h?1(0.5 MPa) and 91.2%, respectively. Thus, the newly synthesized polymer is proven to be a promising material for dye separation with positive charges.     

Electrorheological characterization of polyaniline-coated poly(methyl methacrylate) suspensions

Surface-conductive particles consisting of a poly(methyl methacrylate) (PMMA) core and a polyaniline (PA)-coated shell were synthesized and adopted as suspended particles for electrorheological (ER) fluids. The PA-PMMA composite particles synthesized were monodisperse and spherical in shape. The PA-PMMA suspensions in silicone oil showed typical ER characteristics under an applied electric field. The PA-PMMA composite particles possess a higher dielectric constant and conductivity than the pure PA particle, within an acceptable conductivity range for ER fluids, but the PA-based ER fluid showed larger shear-stress enhancement than the PA-PMMA-based systems. This phenomena can be explained by the interfacial polarizability of PA-based ER fluids, which is the difference between the ER fluid's dielectric constant and loss factor - this polarizability was higher than that of PA-PMMA-based ER fluids, as shown by the dielectric spectrum of each fluid. The insulating PMMA core suppressed the interfacial polarization in ER fluids, resulting in reduced interaction among particles under an imposed electric field.     

Electrorheological properties of hydrolyzed poly(glycidyl methacrylate) suspensions

 Electrorheological behavior of silicone oil suspensions of macroporous poly[(glycidyl methacrylate)-co-(ethylene dimethacrylate)]) (0.60 : 0.40 w) hydrolyzed to various degrees was investigated. Polarizability of particles expressed by the particle dipole coefficient and, consequently, pseudoplasticity of the system at low shear rates after application of an external electric field steeply increased with the hydrolysis degree of the copolymer. As the size and shape of particles remain unchanged during hydrolysis, a series of model suspensions with the same hydrodynamic properties (Newtonian or slightly pseudoplastic when no electric field was applied) but with different intensity of the electrorheological effect could be prepared. Under these conditions, the use of Mason number failed to correlate the apparent viscosity of suspensions of particles with different polarizability in the electric field. On the other hand, when polarizability of particles of a suspension system changes due to a higher temperature, a single curve in the plot of apparent viscosity vs. the Mason number could be obtained. Received: 17 February 1998 Accepted: 8 May 1998     

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.     

Magnetic alignment of the chiral nematic phase of a cellulose microfibril suspension

Stable suspensions of tunicate cellulose microfibrils were prepared by acid hydrolysis of the cellulosic mantles of tunicin. They formed a chiral nematic phase above a critical concentration. External magnetic fields were applied to the chiral nematic phase in two different manners to control its phase structure. (i) Static magnetic fields ranging 1-28 T were used to align the chiral nematic axis (helical axis) in the field direction. (ii) A rotating magnetic field (5 T, 10 rpm) was applied to unwind the helices and to form a nematic phase. These phenomena were interpreted in terms of the anisotropic diamagnetic susceptibility of the cellulose microfibril. The diamagnetic susceptibility of the microfibril is smaller in the direction parallel (chi( parallel)) to the fiber axis than in the direction perpendicular (chi( perpendicular)) to the fiber axis, that is, chi( parallel) < chi( perpendicular) < 0. Because the helical axis coincides with the direction normal ( perpendicular) to the fiber axis, the helical axis aligned parallel to the applied field. On the other hand, the rotating magnetic field induced the uniaxial alignment of the smallest susceptibility axis, that is, chi( parallel) in the present case, and brought about unwinding of the helices.     

Chiral nematic suspensions of cellulose crystallites; phase separation and magnetic field orientation

Suspensions of rod-like cellulose crystallites of axial ratio ≈ 20-40, prepared by acid hydrolysis of natural cellulose fibres with sulphuric acid, give stable ordered fluids that display well-formed textures and disclinations characteristic of chiral nematic liquid crystalline phases. The critical volume fraction for phase separation of salt-free suspensions is typically 0.03, with a relatively narrow biphasic region. Because of the negative diamagnetic susceptibility of cellulose, the ordered phase becomes oriented in a magnetic field with its chiral nematic axis parallel to the applied field.     

Microencapsulation of oil with poly(styrene-N,N-dimethylaminoethyl methacrylate) by SPG emulsification technique: effects of conversion and composition of oil phase

Microcapsules with narrow size distribution, in which hexadecane (HD) was used as a oily core and poly(styrene-co-N,N-dimethylaminoethyl methacrylate) [P(St-DMAEMA)] as a wall, were prepared by a Shirasu porous glass (SPG) emulsification technique and a subsequent suspension polymerization process. That is, a mixture of St monomer, DMAEMA monomer, HD, and N,N'-azobis(2,4-dimethylvaleronitrile) initiator was permeated through the uniform pores of an SPG membrane into a continuous phase containing a poly(vinylpyrrolidone), sodium lauryl sulfate, and sodium nitrite water-soluble inhibitor by applying a pressure, to form uniform droplets. Then, the droplets were polymerized at 70 degrees C. It was found that HD was encapsulated completely only when conversion was quite high, irrespective of whether a DMAEMA hydrophilic monomer was incorporated into the polymer. As the amount of HD increased, HD was more easily encapsulated by the polymer. In order to clarify the reason for such unique behavior, a simulation was carried out, taking the St monomer partition in the HD phase and PSt wall phase into the consideration. It was found that the main reason HD could not be encapsulated completely by PSt when conversion was lower was that the interfacial tension of the HD phase with water and the PSt phase with water got closer. As a result, both HD and PSt can come in contact with the water phase.     

Tuning the thermoresponsiveness of weak polyelectrolytes by pH and light: lower and upper critical-solution temperature of poly(N,N-dimethylaminoethyl methacrylate)

The presence of multivalent counterions induces an upper critical solution temperature (UCST) in addition to the known lower critical solution temperature (LCST) of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA). The LCST-type cloud points can be adjusted by pH of the buffer, whereas the UCST-type cloud points can be adjusted by the concentration of trivalent counterions. High pH favors the LCST transition, whereas lower pH extends the UCST-type miscibility gap at constant concentration of trivalent counterions. By use of hexacyanocobaltate(III) as a trivalent counterion, we can even switch off again the UCST-behavior by UV-illumination (photoinduced dissolution).     

Temperature-induced phase transition in hydrogels of interpenetrating networks poly(N-isopropylmethacrylamide)/poly(N-isopropylacrylamide)

The combination of ¹H NMR spectroscopy, DSC, dynamic mechanical spectroscopy, and optical microscopy was used to investigate temperature-induced volume phase transition in hydrogels of interpenetrating networks (IPNs) poly(N-isopropylmethacrylamide)/poly(N-isopropylacrylamide) (PNIPMAm/PNIPAm) with various PNIPMAm content. In these IPNs, both networks are thermosensitive; such systems were not examined so far. All methods showed phase transition starting at 307 K, which is the volume phase transition temperature of PNIPAm, the major network component. Only the sample with the lowest content of PNIPAm (~54 %) shows two-step collapse transition, other samples with higher PNIPAm content show a single transition in NMR and DSC which indicates enhanced mutual entanglement of both components. In all samples, the phase transition results in substantial increase of both components of the shear modulus. Although the properties of all samples change with temperature in similar way, differences in dependence on the PNIPMAm content and the shape of the sample can be seen.     

Study of the miscibility of poly(styrene-co-4-vinylbenzoic acid) with poly(ethyl methacrylate) or with poly[ethyl methacrylate-co-(2-N,N-dimethylaminoethyl) methacrylate] by inverse gas chromatography

Poly(styrene) is immiscible with poly(ethyl methacrylate). The introduction of a small amount of 4-vinylbenzoic acid units along poly(styrene) chains (PS-VBA) enhanced its miscibility with poly(ethyl methacrylate) (PEMA) or with poly[ethyl methacrylate-co-(2-N,N-dimethylaminoethyl) methacrylate] (PEMA-DAE), as observed from the appearance of a single composition dependent glass transition temperature for each binary system using inverse gas chromatography. The negative values of the apparent polymer-polymer interaction parameter, chi(23)app, determined with different families of molecular probes, for three blend compositions and over a range of temperature confirm quantitatively the miscibility of these blends. The chi(23)app values for PEMA(PS-VBA) and (PEMA-DAE)-(PS-VBA) blends are dependent of the chemical nature of the probes, the temperature and the blend composition.     

Thermoresponsive poly(poly(ethylene glycol) methylacrylate)s grafted cellulose nanocrystals through SI-ATRP polymerization

We report a series of thermoresponsive cellulose nanocrystals (CNCs) decorated with poly(poly(ethylene glycol) methylacrylate) copolymers (poly(PEGMA)-g-CNCs) synthesized by surface initiated-atom transfer radical polymerization (SI-ATRP). The chemical structures and surface morphologies were subsequently confirmed by FT-IR, XPS, and AFM measurements. With regard to thermally responsive behavior, poly(PEGMA)-g-CNCs show tunable lower critical solution temperature (LCST) values in the range of 34–66 °C by varying the feeding ratios of comonomers. The reversible morphological transformation from individual nano-rod structures to larger globule aggregates was further verified by AFM during the LCST transition. These functionalized CNCs have potential as smart film filters and biosensors.     

Phase behavior of poly(sulfobetaine methacrylate)-grafted silica nanoparticles and their stability in protein solutions

Biocompatible and zwitterionic poly(sulfobetaine methacrylate) (PSBMA) was grafted onto the surface of initiator-modified silica nanoparticles via surface-initiated atom transfer radical polymerization. The resultant samples were characterized via nuclear magnetic resonance, Fourier transform infrared spectroscopy, transmission electron microscopy, and thermogravimetric analysis. Their molecular weights and molecular weight distributions were determined via gel permeation chromatography after the removal of silica by etching. Moreover, the phase behavior of these polyzwitterionic-grafted silica nanoparticles in aqueous solutions and stability in protein/PBS solutions were systematically investigated. Dynamic light scattering and UV-visible spectroscopy results indicate that the silica-g-PSBMA nanoparticles exhibit an upper critical solution temperature (UCST) in aqueous solutions, which can be controlled by varying the PSBMA molecular weight, ionic strength, silica-g-PSBMA nanoparticle concentration, and solvent polarity. The UCSTs shift toward high temperatures with increasing PSBMA molecular weight and silica-g-PSBMA nanoparticle concentration. However, increasing the ionic strength and solvent polarity leads to a lowering of the UCSTs. The silica-g-PSBMA nanoparticles are stable for at least 72 h in both negative and positive protein/PBS solutions at 37 °C. The current study is crucial for the translation of polyzwitterionic solution behavior to surfaces to exploit their diverse properties in the development of new, smart, and responsive coatings.