Preparation and study of PPV/PVA nanofibers via electrospinning PPV precursor alcohol solution

We have found a simple method to prepare poly(phenylene vinylene) (PPV) nanofibers via electrospinning PPV precursor alcohol solution under annealed at 180 °C in a N₂ atmosphere. The nanofibers are uniform in diameter and long in decimeter magnitudes with resistance in decay, which makes them have potential applications in optical and electronic devices. The morphology can be better controlled by blend PPV precursor solution with poly(vinylalcohol) (PVA) aqueous solution. The fluorescence spectrum of PPV/PVA nanofibers exhibited appreciable blue shift, which made it possible to fabricate nanofibers with fluorescence from yellow-green to blue.     

Core-sheath functional polymer nanofibers prepared by co-electrospinning

Core-sheath polymer nanofibers with optoelectronic materials as the sheath and easily spinnable polymer as the core were prepared by co-electrospinning. Three prototypical systems of polystyrene/poly(p-phenylene vinylene) (PS/PPV), poly(vinyl alcohol)/poly(p-phenylene vinylene) (PVA/PPV) and polystyrene/tris(8-quinolinolato) aluminum (PS/Alq₃) were investigated. The fluorescence microscopy images showed that the resulting nanofibers with uniform morphologies exhibited outstanding emission properties. The core-sheath structures of these nanofibers were observed by TEM investigation. The photoluminescence spectra indicated that the fluorescent properties of these functional core-sheath nanofibers could be influenced by the interaction between core and sheath materials.     

Fabrication of poly(vinyl alcohol)‐graphene quantum dots coated with poly(3,4‐ethylenedioxythiophene) for supercapacitor

Conducting nanofiber composed of poly(vinyl alcohol) (PVA), graphene quantum dots (GQDs) and poly(3,4‐ethylenedioxythiophene) (PEDOT) was prepared for symmetrical supercapacitor through electrospinning and electropolymerization techniques. The formation of PVA nanofibers with the addition of GQDs was excellently prepared with the average diameter of 55.66 ± 27 nm. Field emission scanning electron microscopy images revealed that cauliflower‐like structure of PEDOT was successfully coated on PVA‐GQD electrospun nanofibers. PVA‐GQD/PEDOT nanocomposite exhibited the highest specific capacitance of 291.86 F/g compared with PVA/PEDOT (220.73 F/g) and PEDOT (161.48 F/g). PVA‐GQD/PEDOT also demonstrated a high specific energy and specific power of 16.95 and 984.48 W/kg, respectively, at 2.0 A/g current density. PVA‐GQD/PEDOT exhibited the lowest resistance of charge transfer (R_ct) and equivalent series resistance compared with PEDOT and PVA/PEDOT, indicating that the fast ion diffusion between the electrode and electrolyte interface. PVA‐GQD/PEDOT nanocomposite also showed an excellent stability with retention of 98% after 1000 cycles. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 50–58     

Preparation of biocompatible system based on electrospun CMC/PVA nanofibers as controlled release carrier of diclofenac sodium

Nanofibers of naturally modified polymer such as carboxymethyl cellulose (CMC) blended with poly(vinyl alcohol) (PVA) at different ratios was obtained by electrospinning technique. The blended solutions of CMC and PVA loaded with and without diclofenac sodium (DS) were electrospun using environmentally benign electrospinning technique in the absence of organic solvents. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA) were used to investigate the surface morphology functional groups, as well as the thermal stability of DS loaded CMC/PVA nanofibers mat. The mechanical properties of the as prepared electrospun nanofibers was also evaluated. The entrapment efficiency and the in vitro release of DS loaded CMC/PVA nanofibers were characterized using UV-Vis spectroscopy. The obtained results displayed that the blended nanofibers have shown a smooth morphology, no beads formation when the concentration of CMC was equal or below 5% and beads formation above 5%. FTIR data demonstrated that there were good interactions between CMC and PVA possibly via the formation of hydrogen bonds. The electrospun blended CMC/PVA nanofibers exhibit good mechanical properties. From the in vitro release data, it was found that with the presence of CMC, the release of DS from the nanofibers mats became sustained controlled. Due to the biocompatibility and low cost of the two blended polymers (CMC and PVA), the blended nanofibers system can be considered as one of the promising materials for the preparation of excellent drug carrier.     

Well‐dispersed N‐heterocyclic carbene–palladium complex anchored onto poly(acrylic acid)/poly(vinyl alcohol) nanofibers: Novel,superior and ecofriendly nanocatalyst for the Suzuki–Miyaura cross‐coupling reaction

Polymeric nanocomposite@Pd is one of the crown jewels for the catalysis of cross‐coupling reactions. This Pd nanocomposite on various polymeric supports has been well established to catalyze cross‐coupling reactions, but its preparation supported on the surface of nanofibers has been largely overlooked. Herein, we report the preparation of a poly(acrylic acid) (PAA)/poly(vinyl alcohol) (PVA) nanofiber‐supported N‐heterocyclic carbene–Pd complex. The first step involves the preparation of PAA/PVA nanofibers using the electrospinning process. The second step comprises the reaction of water‐soluble poly(ethylene glycol)‐imidazole with modified PAA/PVA nanofibers followed by introduction of PdCl₂ to achieve successfully the desired nanocomposite. The catalytic activity of this nanocomposite was examined in the expeditious synthesis of biaryl compounds using the Suzuki–Miyaura cross‐coupling reaction under mild reaction conditions. The composite offers multiple features such as good hydrophilic properties, high surface area, admirable potential in repeatability tests and being recyclable for several runs without significant loss in its activity under the optimum reaction conditions. Our results showed the superior applicability of this novel nanocatalyst in terms of conversion reaction, yields and turnover frequencies. The structure of the catalyst was characterized using a variety of techniques.     

Folic acid modified electrospun poly(vinyl alcohol)/polyethyleneimine nanofibers for cancer cell capture applications

Capture and detection of metastatic cancer cells are crucial for diagnosis and treatment of malignant neoplasm. Here, we report the use of folic acid (FA) modified electrospun poly(vinyl alcohol) (PVA)/polyethyleneimine (PEI) nanofibers for cancer cell capture applications. Electrospun PVA/PEI nanofibers crosslinked by glutaraldehyde vapor were modified with FA via a poly(ethylene glycol) (PEG) spacer, followed by acetylation of the fiber surface PEI amines. The formed FA-modified nanofibers were well characterized. The morphology of the electrospun PVA/PEI nanofibers is smooth and uniform despite the surface modification. In addition, the FA-modified nanofibers display good hemocompatibility as confirmed by hemolysis assay. Importantly, the developed FA-modified nanofibers are able to specifically capture cancer cells overexpressing FA receptors, which were validated by quantitative cell counting assay and qualitative confocal microscopy analysis. The developed FA-modified PVA/PEI nanofibers may be used for capturing circulating tumor cells for cancer diagnosis applications.     

Novel fabrication of magnetic thermoplastic nanofibers via melt extrusion of immiscible blends

A novel technique of fabricating magnetic thermoplastic nanofibers by the control of the phase separation of immiscible polymer blends during melt extrusion was presented. The magnetic poly(vinyl alcohol‐co‐ethylene) (PVA‐co‐PE)/Fe₃O₄ composite nanofibers were prepared via the melt extrusion of cellulose acetate butyrate matrix and PVA‐co‐PE preloaded with different amounts of Fe₃O₄ nanoparticles. The morphologies of magnetic composite nanofibers were characterized by scanning electron microscopy. The uniform dispersion of Fe₃O₄ nanoparticles in nanofiber matrixes and crystal structures were confirmed using transmission electron microscopy and wide angle X‐ray diffraction. Thermogravimetric analysis was employed to quantify the exact loading amount of Fe₃O₄ nanoparticles in the composite nanofibers. The magnetic measurements showed that composite nanofibers displayed superparamagnetic behavior at room temperature. With increasing content of Fe₃O₄ nanoparticles, the saturation magnetization of the magnetic composite nanofiber significantly improved. The prepared magnetic composite nanofibers might have found potential applications in the sensors and bio‐molecular separation fields. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation and characterization of aqueous stable electro-spun nanofibers using polyvinyl alcohol/polyvinyl pyrrolidone/zeolite

Cross-linked polyvinyl alcohol/polyvinyl pyrrolidone/zeolite fibers were prepared in the presence of potassium peroxodisulphate (K₂S₂O₈) under the curing process by the electrospinning technique. The narrowest nanofibers of PVA/PVP (50:50) were prepared under optimum experimental conditions of 2.5 × 10^?4 mol of K₂S₂O₈, an applied voltage of 22 KV, the distance of 15 cm and the feed rate of 0.2 mL/h. The progress of the cross-linking was examined by immersion of the prepared nanofibers in water and following the swelling degrees. By raising the K₂S₂O₈ amount and curing time, the cross-linking density was increased. X-ray diffraction (XRD) demonstrated that the crystallinity of the nanofibers was decreased by the increase of K₂S₂O₈ and the lowest crystallinity was observed for PVA/PVP (70:30). The contact angle of nanofibers was decreased from 72° to 34 by increasing PVP ratio from 30 to 70. The morphology of the nanofibers before and after immersion in the simulated body fluid (SBF) was studied using electron scanning microscopy (SEM) and PVA/PVP (70:30) showed the highest changes in the morphology while the lowest one was observed for PVA/PVP (50:50). Moreover, the cross-linked PVA/ PVP with the ratio of 50:50 had the narrowest diameter of 200 ± 100 nm, and by addition of about 0.5% zeolite, it was even reduced more to 150 ± 50 nm. The cross-linked nanofibers (50:50) with 0.5 wt% and 1.5 wt% zeolite nanoparticles showed the tensile modules of 416.26 and 703.52 MPa, respectively, while in the absence of zeolite, it was209.25 MPa. Fibroblast L929 cells were cultured on the cross-linked PVA/PVP/zeolite (50:50:0.5) nanofiber, and the cell proliferation and growth was evaluated by MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay. Fibroblasts grew on the surface of scaffold showed good morphology and proliferation after seven days and the absorption amount was increased from 0.075 to 0.78     

Preparation of Polymer Nanofibers Containing Silver Nanoparticles by Using Poly(N‐vinylpyrrolidone)

Summary: Poly(N‐vinylpyrrolidone) (PVP) was used in two methods to prepare polymer nanofibers containing Ag nanoparticles. The first method involved electrospinning the PVP nanofibers containing Ag nanoparticles directly from the PVP solutions containing the Ag nanoparticles. N,N‐Dimethylformamide was used as a solvent for the PVP as well as a reducing agent for the Ag⁺ ions in the PVP solutions. In the second method, poly(vinyl alcohol) (PVA) aqueous solutions were electrospun with 5 wt.‐% of the PVP containing Ag nanoparticles. The Ag nanoparticles were evenly distributed in the PVA nanofibers. PVP containing Ag nanoparticles could be used to introduce Ag nanoparticles to other polymer nanofibers that are miscible with PVP.

TEM image of a PVA nanofiber electrospun with 5 wt.‐% of the PVP containing Ag nanoparticles.     

Epidermal cellular response to poly(vinyl alcohol) nanofibers containing silver nanoparticles

A heat-treated PVA nanofibrous matrix containing silver (Ag) was prepared by electrospinning an aqueous 10 wt% PVA solution and followed by heat treatment at 150 °C for 10 min. The average diameter of the as-spun and heat-treated PVA nanofibers was 330 nm. The heat-treated PVA nanofibrous matrix containing Ag was irradiated with UV light to transform the Ag ions in the nanofibrous matrix into Ag nanoparticles. The in vitro cytotoxicity of the Ag ions and/or nanoparticles on normal human epidermal keratinocytes (NHEK) and fibroblasts (NHEF) cultures was examined. The PVA nanofibrous matrix containing Ag showed slightly higher level of attachment and spreading in the early stage culture (1 h) than the PVA nanofibers without Ag (control). However, compared with the PVA nanofibers without Ag, the heat-treated and UV-irradiated PVA nanofibers, containing mainly Ag ions and nanoparticles, respectively, showed reduced cell attachment and spreading. This shows that both Ag ions and Ag nanoparticles are cytotoxic to NHEK and NHEF. There was no significant difference in cytotoxicity to NHEK and NHEF between Ag ions and Ag nanoparticles. NHEF appeared to be more sensitive to Ag ions or particles than NHEK. In addition, the residual nitrate ions (NO₃⁻) in the PVA nanofibers had an adverse effect on the culture of both cells.     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Effect of pullulan/poly(vinyl alcohol) blend system on the montmorillonite structure with property characterization of electrospun pullulan/poly(vinyl alcohol)/montmorillonite nanofibers

Nanofibers of the composite of pullulan (PULL), poly(vinyl alcohol) (PVA), and montmorillonite clay (MMT) were prepared using electrospinning method in aqueous solutions. Pullulan is an interesting natural polymer for many of its merits and good properties. Because of biocompatibility and non-toxicity of PVA, it could be used in numerous fields. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermal gravimetric analysis (TGA) were done to characterize the PULL/PVA/MMT nanofibers morphology and properties. XRD patterns and FTIR data demonstrated that there were good interactions between PULL and PVA caused by possibly hydrogen bonds. Moreover, XRD data and TEM images indicated that intercalated and exfoliated MMT nanoplatelets can be obtained within the PULL/PVA/MMT nanofibers depending on the PULL/PVA blend ratios. Furthermore, the thermal stability and mechanical property (tensile strength) of PULL/PVA/MMT nanofibers could be enhanced more by exfoliated MMT nanoplatelets than intercalated structures of that nanoplatelets.     

A novel method to prepare microporous and nanofibrous hydrogel scaffolds as neural tissue engineering

A new method to prepare poly (vinyl alcohol) hydrogels by nebulization method.is introduced. A blend of Poly (vinyl alcohol) (PVA), sodium gum malate (SGM) and cellulose nanofibers (CNFs) originated from Catha Edulis was prepared and tested as neural tissue substitutes. Glutaraldehyde (GLA) was used as a crosslinker. Presence of SGM and CNFs in the formulation improved the nebulization process of PVA solution as well as mechanical properties of the fabricated hydrogels. The tensile strength of neat PVA films attains 46.7 MPa, while the tensile strength was 94.23 MPa for crosslinked-PVA. The tensile strength was found to increase with the increase in the CNFs content in the PVA compared with PVA/SGM. These soft tissues were characterized by using FTIR, SEM, and DSC. Scanning electron microscopy (SEM) results showed that PVA/SGM/CNFs blends has a diameter about 50 ± 8µm. The hydrogels were tested also for antimicrobial activities against pathogenic bacteria like Candida albicans (fungus), Bacillus subtilis (G + Ve), Staphylococcus aureus (G + Ve), Proteus vulgaris (G ? Ve) and Erwinia carotovora (G ? Ve). Favorable mechanical, thermal properties and biodegradation nature of the hydrogels, as well as antimicrobial property indicate that prepared hydrogels are suitable for tissue engineering applications.     

Control release of lactate dehydrogenase encapsulated in poly (vinyl alcohol) nanofibers via electrospinning

Sustained release of lactate dehydrogenase (LDH, EC 1.1.1.27) from electrospun poly (vinyl alcohol) (PVA) nanofibers was successfully achieved using the coaxial electrospinning technique. The presence of the encapsulated enzyme in the nanofibers was confirmed by infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Scanning electron microscopy (SEM) was used to evaluate the morphology and diameter of the nanofibers. The conversion of lactate to pyruvate by LDH coupling with the reduction of the cofactor nicotinamide adenine dinucleotide (NAD⁺) to dihydronicotinamide adenine dinucleotide (NADH) produces an increment in the ultraviolet absorption (UV) at 340 nm. This change in the UV absorbance was used to follow the release kinetic of LDH from the PVA nanofibers and also as a measure to evaluate the residual enzymatic catalytic function. Most of the encapsulated LDH enzyme was released in a sustained manner from the PVA nanofibers within a period of 1 month.     

Stabilization of electrospun poly(vinyl alcohol) nanofibrous mats in aqueous solutions

<正>The stability ofpoly(vinyl alcohol)(PVA) nanofibrous mats in water media was improved by post-electrospinning treatments.Bifunctional glutaraldehyde(GA) in methanol was used as a crosslinking agent to stabilize PVA nanofiber,but fiber twinning was observed frequently,and the highly porous structure of PVA nanofibrous mats was destroyed when the crosslinked fiber was soaked in water.To overcome this shortcoming,chitosan(CS) was introduced into the PVA spinning solution to prepare PVA/CS composite nanofibers.Their treatment in GA/methanol solution could retain the fiber morphology of PVA/CS nanofibers and porous structure of PVA/CS nanofibrous mats even if they were soaked in aqueous solutions for 1 month.Scanning electron microscopy(SEM),X-ray diffraction(XRD),thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC) were applied to characterize the physicochemical structure and thermal properties of PVA nanofibers.It was found that the water resistance of PVA nanofibrous mats was enhanced because of the improvement of the degree of crosslinking and crystallinity in the electrospun PVA fibers after soaking in GA/methanol solution.     

Effect of poly(amid–imide)/Al2O3 hybrid with various ratios on the physicochemical properties of poly(vinyl alcohol) nanocomposites films

To study the effect of the various ratios of poly(amide–imide)/Al₂O₃ nanocomposites (PANC)s on the mechanical and thermal properties of nanocomposites films, poly(vinyl alcohol) (PVA)/PANCs based on various ratios of 2, 4, and 6 wt% were prepared and characterized. In the first step, the surface of alumina nanoparticles was treated with 15 wt% of biosafe diacid and consequently, about 10 wt% of these modified nanoparticles were loaded into the poly(amide–imide) matrix. Then, various contents of the obtained PANCs were incorporated into a PVA solution using a sonochemical treatment. The effects of PANC on the structure and morphology of PVA matrix were studied using powder X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and thermal gravimetric analysis (TGA). The results show that the tensile strength and decomposition temperature were improved as the portion of PANC into PVA matrix are increased from 2 to 6 wt%. Also, AFM pictures of the fracture surfaces of PVA/PANCs showed a significantly rougher surface than the neat PVA.     

Photocatalytic Crystalline and Amorphous TiO2 Nanotubes Prepared by Electrospinning and Atomic Layer Deposition

In this work core/shell composite polymer/TiO₂ nanofibers and from those TiO₂ nanotubes were prepared. First, poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) fibers were synthetized by electrospinning. They were covered with a 100 nm thick amorphous TiO₂ layer by atomic layer deposition at 50 °C. Later the polymer core was removed by two different methods: dissolution and annealing. In the case of dissolution in water, the as-prepared TiO₂ nanotubes remained amorphous, while when annealing was used to remove the polymers, the TiO₂ crystallized in anatase form. Due to this, the properties of amorphous and crystalline TiO₂ nanotubes with exactly the same structure and morphology could be compared. The samples were investigated by SEM-EDX, ATR-IR, UV-Vis, XRD and TG/DTA-MS. Finally, the photocatalytic properties of the TiO₂ nanotubes were studied by decomposing methyl-orange dye under UV light. According to the results, crystalline anatase TiO₂ nanotubes reached the photocatalytic performance of P25, while amorphous TiO₂ nanotubes had observable photocatalytic activity.     

About the compatibility of polymer components in polymer complexes based on poly(acrylamide) and poly(vinyl alcohol)

The issue of applying the usual concepts of polymer compatibility to nonstoichiometric PVA/PAA mixtures of chemically complementary poly(vinyl alcohol) and poly(acrylamide), which form in water solution InterPC (intermolecular polymer complex) stabilyzed by H‐bonds, and PAA to PVA graft copolymers (PVA‐PAA_N) with different grafted chains number N, that are IntraPC (intramolecular polymer complexes) is discussed. PVA and PAA are compatible on molecular level. At the same time PVA/PAA mixture (50/50 W/W) is characterized by heterogeneous structure consists of InterPC with ϕ_char=9g_PVA/g_PAA and the excess of unconnected PAA. In the case of IntraPC, yet, only PVA‐PAA_N, where N=25, is characterized by a single glass transition temperature (Tg). At larger values of N separate PAA domains form giving rise to the corresponding Tg. These results are discussed in view of IntraPC structure peculiarities as a function of N investigated by IR spectroscopy.     

Transparent and anhydrous proton conductors based on PVA/imidazole/NH4H2PO4 composites

A new anhydrous proton conducting membrane for solid-state electrochromic device (ECD) based on poly(vinyl alcohol) (PVA), imidazole (Imi), and ammonium dihydrogen phosphate (NH₄H₂PO₄) was prepared. The structure of PVA/Imi/NH₄H₂PO₄ composite membrane was studied by X-ray diffraction and differential scanning calorimetry (DSC). The transmittance of the membrane always decreases with increasing content of the imidazolium. Compared with the PVA/NH₄H₂PO₄ membrane, the addition of proper amount of Imi can enhance the proton conductivity to a certain extent. At low PVA content, equal molar ratio of Imi and NH₄H₂PO₄ is favorable for high proton conductivity, while higher molar ratio of Imi and NH₄H₂PO₄ is beneficial at high PVA content.     

Study on the nonisothermal crystallization behavior of poly(vinyl alcohol)/attapulgite nanocomposites by DSC analysis

Attapulgite (AT)‐reinforced poly(vinyl alcohol) (PVA) nanocomposite films were prepared by solution‐casting technique. The nonisothermal crystallization behaviors of PVA bulk and PVA/AT nanocomposites have been investigated by differential scanning calorimetry (DSC). It has been found that the uniformly dispersed AT nanorods in the matrix have great influence on the glass transition temperature and crystallization behavior of PVA matrix. The Jeziorny method has been employed to analyze the DSC data. The results show that Jeziorny method could describe this system very well. Comparing with the PVA bulk, PVA/AT nanocomposites have higher crystallinity X_t, shorter semicrystallization time t_1/2, and higher crystallization rate constant Z_c. It can be concluded that AT can be used as an effective nucleating agent and has effects on the growth of crystallites in the crystallization process of PVA matrix. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 534–540, 2006